The DOI matches its Crossref record; 39 of the 39 references it cites were found in a registry or an index.
Integrating Simulations and Experiments To Predict Sheet Resistance and Optical Transmittance in Nanowire Films for Transparent Conductors
Abstract
Metal nanowire films are among the most promising alternatives for next-generation flexible, solution-processed transparent conductors. Breakthroughs in nanowire synthesis and processing have reported low sheet resistance (Rs ≤ 100 Ω/sq) and high optical transparency (%T > 90%). Comparing the merits of the various nanowires and fabrication methods is inexact, because Rs and %T depend on a variety of independent parameters including nanowire length, nanowire diameter, areal density of the nanowires and contact resistance between nanowires. In an effort to account for these fundamental parameters of nanowire thin films, this paper integrates simulations and experimental results to build a quantitatively predictive model. First, by fitting the results from simulations of quasi-2D rod networks to experimental data from well-defined nanowire films, we obtain an effective average contact resistance, which is indicative of the nanowire chemistry and processing methods. Second, this effective contact resistance is used to simulate how the sheet resistance depends on the aspect ratio (L/D) and areal density of monodisperse rods, as well as the effect of mixtures of short and long nanowires on the sheet resistance. Third, by combining our simulations of sheet resistance and an empirical diameter-dependent expression for the optical transmittance, we produced a fully calculated plot of optical transmittance versus sheet resistance. Our predictions for silver nanowires are validated by experimental results for silver nanowire films, where nanowires of L/D > 400 are required for high performance transparent conductors. In contrast to a widely used approach that employs a single percolative figure of merit, our method integrates simulation and experimental results to enable researchers to independently explore the importance of contact resistance between nanowires, as well as nanowire area fraction and arbitrary distributions in nanowire sizes. To become competitive, metal nanowire systems require a predictive tool to accelerate their design and adoption for specific applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Roll-to-roll production of 30-inch graphene films for transparent electrodes
Bae, S., Kim, H., Lee, Y., Xu, X., Park, J.-S., Zheng, Y., Balakrishnan, J., Lei, T., Ri Kim, H., Song, Y. I., et al. (2010) · Nature Nanotechnology · doi:10.1038/nnano.2010.132 · Cited by 8,136
Methods of conjugate gradients for solving linear systems
Hestenes, M. R., & Stiefel, E. (1952) · Journal of Research of the National Bureau of Standards · doi:10.6028/jres.049.044 · Cited by 8,132
Kirkpatrick, S. (1973) · Reviews of Modern Physics · doi:10.1103/revmodphys.45.574 · Cited by 5,260
Transparent, Conductive Carbon Nanotube Films
Wu, Z., Chen, Z., Du, X., Logan, J. M., Sippel, J., Nikolou, M., Kamaras, K., Reynolds, J. R., Tanner, D. B., Hebard, A. F., et al. (2004) · Science · doi:10.1126/science.1101243 · Cited by 2,959
Hecht, D. S., Hu, L., & Irvin, G. (2011) · Advanced Materials · doi:10.1002/adma.201003188 · Cited by 2,229
Scalable Coating and Properties of Transparent, Flexible, Silver Nanowire Electrodes
Hu, L., Kim, H. S., Lee, J.-Y., Peumans, P., & Cui, Y. (2010) · ACS Nano · doi:10.1021/nn1005232 · Cited by 2,075
Solution-Processed Metal Nanowire Mesh Transparent Electrodes
Lee, J.-Y., Connor, S. T., Cui, Y., & Peumans, P. (2008) · Nano Letters · doi:10.1021/nl073296g · Cited by 1,857
De, S., Higgins, T. M., Lyons, P. E., Doherty, E. M., Nirmalraj, P. N., Blau, W. J., Boland, J. J., & Coleman, J. N. (2009) · ACS Nano · doi:10.1021/nn900348c · Cited by 1,622
Criteria for Choosing Transparent Conductors
Gordon, R. G. (2000) · MRS Bulletin · doi:10.1557/mrs2000.151 · Cited by 1,539
Scientific importance, properties and growing applications of poly(3,4-ethylenedioxythiophene)
Kirchmeyer, S., & Reuter, K. (2005) · Journal of Materials Chemistry · doi:10.1039/b417803n · Cited by 1,452
Cited by
Metal Nanowire Networks: The Next Generation of Transparent Conductors
Ye, S., Rathmell, A. R., Chen, Z., Stewart, I. E., & Wiley, B. J. (2014) · Advanced Materials · doi:10.1002/adma.201402710 · Cited by 796
Self-citationChoi, S., Han, S. I., Kim, D., Hyeon, T., & Kim, D.-H. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00706c · Cited by 591
Huang, Q., & Zhu, Y. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201800546 · Cited by 482
Material‐Based Approaches for the Fabrication of Stretchable Electronics
Kim, D. C., Shim, H. J., Lee, W., Koo, J. H., & Kim, D. (2020) · Advanced Materials · doi:10.1002/adma.201902743 · Cited by 438
Synthesis and Purification of Silver Nanowires To Make Conducting Films with a Transmittance of 99%
Li, B., Ye, S., Stewart, I. E., Alvarez, S., & Wiley, B. J. (2015) · Nano Letters · doi:10.1021/acs.nanolett.5b02582 · Cited by 384
Self-citationCho, S., Kang, S., Pandya, A., Shanker, R., Khan, Z., Lee, Y., Park, J., Craig, S. L., & Ko, H. (2017) · ACS Nano · doi:10.1021/acsnano.7b01714 · Cited by 365
Transparent Electronics for Wearable Electronics Application
Won, D., Bang, J., Choi, S. H., Pyun, K. R., Jeong, S., Lee, Y., & Ko, S. H. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00139 · Cited by 339
One-Dimensional Metal Nanostructures: From Colloidal Syntheses to Applications
Huo, D., Kim, M. J., Lyu, Z., Shi, Y., Wiley, B. J., & Xia, Y. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00745 · Cited by 335
Self-citationFacile synthesis of very-long silver nanowires for transparent electrodes
Jiu, J., Araki, T., Wang, J., Nogi, M., Sugahara, T., Nagao, S., Koga, H., Suganuma, K., Nakazawa, E., Hara, M., et al. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta00502c · Cited by 294
Electrical properties of polymer nanocomposites containing rod-like nanofillers
Mutiso, R. M., & Winey, K. I. (2015) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2014.06.002 · Cited by 288
Self-citationCapillary-Force-Induced Cold Welding in Silver-Nanowire-Based Flexible Transparent Electrodes
Liu, Y., Zhang, J., Gao, H., Wang, Y., Liu, Q., Huang, S., Guo, C. F., & Ren, Z. (2017) · Nano Letters · doi:10.1021/acs.nanolett.6b04613 · Cited by 284
Oxidative etching for controlled synthesis of metal nanocrystals: atomic addition and subtraction
Long, R., Zhou, S., Wiley, B. J., & Xiong, Y. (2014) · Chemical Society Reviews · doi:10.1039/c4cs00136b · Cited by 270
Self-citationPolymer nanocomposite meshes for flexible electronic devices
Gong, M., Zhang, L., & Wan, P. (2020) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2020.101279 · Cited by 270
Thermal Response of Transparent Silver Nanowire/PEDOT:PSS Film Heaters
Ji, S., He, W., Wang, K., Ran, Y., & Ye, C. (2014) · Small · doi:10.1002/smll.201401690 · Cited by 265
Solution-Processed Transparent Electrodes for Emerging Thin-Film Solar Cells
Zhang, Y., Ng, S.-W., Lu, X., & Zheng, Z. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00483 · Cited by 264
Flexible transparent conductors based on metal nanowire networks
Guo, C. F., & Ren, Z. (2015) · Materials Today · doi:10.1016/j.mattod.2014.08.018 · Cited by 258
Park, J. H., Hwang, G., Kim, S., Seo, J., Park, H., Yu, K., Kim, T., & Lee, K. J. (2017) · Advanced Materials · doi:10.1002/adma.201603473 · Cited by 256
Ge, Y., Liu, J., Liu, X., Hu, J., Duan, X., & Duan, X. (2019) · Journal of the American Chemical Society · doi:10.1021/jacs.9b02497 · Cited by 61
Metadata
- Authors
- Mutiso, R. M., Sherrott, M. C., Rathmell, A. R., Wiley, B. J., & Winey, K. I.
- Venue
- ACS Nano
- Publisher
- American Chemical Society (ACS)
- Published
- 2013-08-15
- Volume
- 7
- Issue
- 9
- Pages
- 7654-7663
- ISSN
- 1936-0851 (ISSN-L)
- 1936-086X
- OpenAlex
- W2168020749
- Cited by
- 400
- References
- 39
- FWCI
- 24.56
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.