The DOI matches its Crossref record; 1 of the 1 references it cites were found in a registry or an index.
Recovery of Lithium from Wastewater Using Development of Li Ion-Imprinted Polymers
Open accessAbstract
Recycling lithium from waste lithium batteries is a growing problem, and new technologies are needed to recover the lithium. Currently, there is a lack of highly selective adsorption/ion exchange materials that can be used to recover lithium. We have developed a magnetic lithium ion-imprinted polymer (Fe 3 O 4 @SiO 2 @IIP) by using novel crown ether. The Fe 3 O 4 @SiO 2 @IIP has been synthesized by a surface imprinting technique using our newly synthesized 2-(allyloxy) methyl-12-crown-4 as a functional monomer. The Fe 3 O 4 @SiO 2 @IIP was analyzed by Fourier infrared spectroscopy (FT-IR), scanning electron microscopy (SEM), and X-ray diffraction (XRD). The optimum pH for adsorption is 6. Fe 3 O 4 @SiO 2 @IIP shows fast adsorption kinetics for lithium ions (10 min to reach complete equilibrium), and the adsorption process obeys an external mass transfer model. Homogeneous binding sites are proved by the Langmuir isotherm, and the maximum adsorption capacity is 0.586 mmol/g. Fe 3 O 4 @SiO 2 @IIP has excellent selectivity for Li(I) because the selectivity separation factors of Li(I) with respect to Na(I), K(I), Cu(II), and Zn(II) are 50.88, 42.38, 22.5, and 22.2, respectively. The adsorption capacity of sorbent remained above 92% after five cycles. Fixed-bed column adsorption experiments indicate that the effective treatment volume was 140 bed volumes (BV) in the first run with a breakthrough of 10% of the inlet concentration for an inlet concentration of 0.5 mmol/L, and 110 BV was treated for the second run under identical conditions. We demonstrated that 89.8% of the lithium was recovered during bed regeneration using 0.5 mol/L HCl solution. Fe 3 O 4 @SiO 2 @IIP also exhibited excellent removal efficiency for Li(I) in real wastewater, validating its great potential in advanced wastewater treatment. Accordingly, we have developed a new method for wastewater treatment that meets Li emission standards, and recovery of Li creates economic interest.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sun, L., & Qiu, K. (2011) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2011.07.114 · Cited by 493
Cited by
Greenificated Molecularly Imprinted Materials for Advanced Applications
Ostovan, A., Arabi, M., Wang, Y., Li, J., Li, B., Wang, X., & Chen, L. (2022) · Advanced Materials · doi:10.1002/adma.202203154 · Cited by 442
Luo, J., Luo, X., Crittenden, J., Qu, J., Bai, Y., Peng, Y., & Li, J. (2015) · Environmental Science & Technology · doi:10.1021/acs.est.5b02903 · Cited by 295
Self-citationA review on lithium recovery using electrochemical capturing systems
Zavahir, S., Elmakki, T., Gulied, M., Ahmad, Z., Al-Sulaiti, L., Shon, H. K., Chen, Y., Park, H., Batchelor, B., & Han, D. S. (2021) · Desalination · doi:10.1016/j.desal.2020.114883 · Cited by 220
Electrochemical Technologies for Lithium Recovery from Liquid Resources: A Review
Wang, J., Yue, X., Wang, P., Yu, T., Du, X., Hao, X., Abudula, A., & Guan, G. (2022) · Renewable and Sustainable Energy Reviews · doi:10.1016/j.rser.2021.111813 · Cited by 211
Nikkhah, H., Ipekçi, D., Xiang, W., Stoll, Z., Xu, P., Li, B., McCutcheon, J. R., & Beykal, B. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.155349 · Cited by 154
Metadata
- Authors
- Luo, X., Guo, B., Luo, J., Deng, F., Zhang, S., Luo, S., & Crittenden, J.
- Venue
- ACS Sustainable Chemistry & Engineering
- Publisher
- American Chemical Society (ACS)
- Published
- 2015-02-18
- Volume
- 3
- Issue
- 3
- Pages
- 460-467
- ISSN
- 2168-0485 (ISSN-L)
- OpenAlex
- W2331132567
- Cited by
- 186
- References
- 1
- FWCI
- 16.02
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.