The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
Permeability of illite‐bearing shale: 1. Anisotropy and effects of clay content and loading
Abstract
Permeability of illite‐rich shale recovered from the Wilcox formation and saturated with 1 M NaCl solution varies from 3 × 10−22 to 3 × 10−19 m 2, depending on flow direction relative to bedding, clay content (40–65%), and effective pressure Pe (2–12 MPa). Permeability k is anisotropic at low Pe; measured k values for flow parallel to bedding at Pe = 3 MPa exceed those for flow perpendicular to bedding by a factor of 10, both for low clay content (LC) and high clay content (HC) samples. With increasing Pe, k becomes increasingly isotropic, showing little directional dependence at 10–12 MPa. Permeability depends on clay content; k measured for LC samples exceed those of HC samples by a factor of 5. Permeability decreases irreversibly with the application of Pe, following a cubic law of the form k = k0 [1 − (Pe/P1)m]3, where k0 varies over 3 orders of magnitude, depending on orientation and clay content, m is dependent only on orientation (equal to 0.166 for bedding‐parallel flow and 0.52 for flow across bedding), and P1 (18–27 MPa) appears to be similar for all orientations and clay contents. Anisotropy and reductions in permeability with Pe are attributed to the presence of crack‐like voids parallel to bedding and their closure upon loading, respectively.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
CRC Handbook of Chemistry and Physics
(2014) · doi:10.1201/b17118 · Cited by 57,706
IMPROVEMENTS IN EPOXY RESIN EMBEDDING METHODS
Luft, J. H. (1961) · The Journal of Cell Biology · doi:10.1083/jcb.9.2.409 · Cited by 10,212
LEAST-SQUARES FITTING OF A STRAIGHT LINE
York, D. (1966) · Canadian Journal of Physics · doi:10.1139/p66-090 · Cited by 1,487
Wenk, H.-R. (2002) · Reviews in Mineralogy and Geochemistry · doi:10.2138/gsrmg.51.1.291 · Cited by 931
Wong, T., David, C., & Zhu, W. (1997) · Journal of Geophysical Research: Solid Earth · doi:10.1029/96jb03281 · Cited by 897
How permeable are clays and shales?
Neuzil, C. E. (1994) · Water Resources Research · doi:10.1029/93wr02930 · Cited by 601
Diagenesis of Gulf Coast Clayey Sediments and Its Possible Relation to Petroleum Migration
(2), J. F. B. (1969) · AAPG Bulletin · doi:10.1306/5d25c595-16c1-11d7-8645000102c1865d · Cited by 584
Revil, A., & Cathles, L. M. (1999) · Water Resources Research · doi:10.1029/98wr02700 · Cited by 470
Geological Aspects of Abnormal Reservoir Pressures in Gulf Coast Louisiana
(2), G. D. (1953) · AAPG Bulletin · doi:10.1306/5ceadc6b-16bb-11d7-8645000102c1865d · Cited by 442
(2), D. W. H. (1987) · AAPG Bulletin · doi:10.1306/9488787f-1704-11d7-8645000102c1865d · Cited by 437
Cited by
Hydrogeology and Mechanics of Subduction Zone Forearcs: Fluid Flow and Pore Pressure
Saffer, D. M., & Tobin, H. J. (2011) · Annual Review of Earth and Planetary Sciences · doi:10.1146/annurev-earth-040610-133408 · Cited by 554
A permeability–porosity relationship for mudstones
Yang, Y., & Aplin, A. C. (2010) · Marine and Petroleum Geology · doi:10.1016/j.marpetgeo.2009.07.001 · Cited by 312
Permeability and petrophysical properties of 30 natural mudstones
Yang, Y., & Aplin, A. C. (2007) · Journal of Geophysical Research: Solid Earth · doi:10.1029/2005jb004243 · Cited by 303
Gas transport and storage capacity in shale gas reservoirs – A review. Part A: Transport processes
Gensterblum, Y., Ghanizadeh, A., Cuss, R. J., Amann-Hildenbrand, A., Krooss, B. M., Clarkson, C. R., Harrington, J. F., & Zoback, M. D. (2015) · Journal of Unconventional Oil and Gas Resources · doi:10.1016/j.juogr.2015.08.001 · Cited by 265
The Nanoscale Basis of CO2 Trapping for Geologic Storage
Bourg, I. C., Beckingham, L. E., & DePaolo, D. J. (2015) · Environmental Science & Technology · doi:10.1021/acs.est.5b03003 · Cited by 163
Metadata
- Authors
- Kwon, O., Kronenberg, A. K., Gangi, A. F., Johnson, B., & Herbert, B. E.
- Venue
- Journal of Geophysical Research: Solid Earth
- Publisher
- American Geophysical Union (AGU)
- Published
- 2004-10
- Volume
- 109
- Issue
- B10
- ISSN
- 0148-0227 (ISSN-L)
- OpenAlex
- W2127477904
- Cited by
- 253
- References
- 36
- FWCI
- 3.93
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Permeability of illite‐bearing shale: 1. Anisotropy and effects of clay content and loading. https://app.cochat.ai/papers/10.1029/2004jb003052
- The paper
- Kwon, O., Kronenberg, A. K., Gangi, A. F., Johnson, B., & Herbert, B. E. (2004). Permeability of illite‐bearing shale: 1. Anisotropy and effects of clay content and loading. Journal of Geophysical Research: Solid Earth. https://doi.org/10.1029/2004jb003052
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.