The DOI matches its Crossref record; 20 of the 20 references it cites were found in a registry or an index.
Permeability and petrophysical properties of 30 natural mudstones
Open accessAbstract
We present permeability and other petrophysical data (including pore size distribution, porosity, particle size distribution, grain density, specific surface area, total carbon content, organic carbon content, and sulphur content) for 30 deeply buried mudstones. Permeabilities were measured at different effective consolidation stresses ranging from 2.5 to 60 MPa with a 30,000 mg L−1 NaCl solution. Samples represent a wide spectrum of mudstone types with clay size particle contents ranging from 13 to 66%. Porosities range from 6 to 27%; pore size data show that porosity loss is driven primarily by collapse of the largest pores. Our results confirm and considerably extend previously reported results indicating the influence of clay content on pore size distributions and the way they evolve as a result of compaction. Vertical permeabilities, measured using the transient pulse decay technique, range from 2.4 × 10−22 m 2 to 1.6 × 10−19 m 2. Horizontal permeabilities range from 3.9 × 10−21 m 2 to 9.5 × 10−19 m 2, overlapping with but generally higher than vertical permeabilities. In general, permeability decreases logarithmically with porosity. The relationship between permeability and porosity is strongly influenced by clay content, especially at higher porosities. Ratios of horizontal to vertical permeability measured on four samples range from 1.7 to 11.8, implying the influence of both particle alignment and sedimentological heterogeneity. We have used the data to calibrate two permeability models. For the Kozeny‐Carman model, values of 200 and 1000 for the product of shape and tortuosity factors provide the best fit for the vertical and horizontal permeabilities, respectively. The calibrated Yang‐Aplin model predicts the permeability of almost all the samples to within a factor of ±3 over a 4 orders of magnitude range of permeability.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
The Physics of Flow Through Porous Media
SCHEIDEGGER, A. E. (1958) · Soil Science · doi:10.1097/00010694-195812000-00015 · Cited by 2,596
On the compressibility and shear strength of natural clays
Burland, J. B. (1990) · Géotechnique · doi:10.1680/geot.1990.40.3.329 · Cited by 1,736
(2), E. D. P. (1992) · AAPG Bulletin · doi:10.1306/bdff87a4-1718-11d7-8645000102c1865d · Cited by 711
How permeable are clays and shales?
Neuzil, C. E. (1994) · Water Resources Research · doi:10.1029/93wr02930 · Cited by 601
Mechanisms Controlling the Permeability of Clays
Mesri, G., & Olson, R. E. (1971) · Clays and Clay Minerals · doi:10.1346/ccmn.1971.0190303 · Cited by 534
The consolidation of clays by gravitational compaction
SKEMPTON, A. W. (1969) · Quarterly Journal of the Geological Society of London · doi:10.1144/gsjgs.125.1.0373 · Cited by 459
Dugan, B., & Flemings, P. B. (2000) · Science · doi:10.1126/science.289.5477.288 · Cited by 337
Experimental characterisation of the hydrocarbon sealing efficiency of cap rocks
Schlömer, S., & Krooss, B. M. (1997) · Marine and Petroleum Geology · doi:10.1016/s0264-8172(97)00022-6 · Cited by 254
Permeability of illite‐bearing shale: 1. Anisotropy and effects of clay content and loading
Kwon, O., Kronenberg, A. K., Gangi, A. F., Johnson, B., & Herbert, B. E. (2004) · Journal of Geophysical Research: Solid Earth · doi:10.1029/2004jb003052 · Cited by 253
Aplin, A. C., Matenaar, I. F., McCarty, D. K., & van der Pluijm, B. A. (2006) · Clays and Clay Minerals · doi:10.1346/ccmn.2006.0540411 · Cited by 243
Self-citationCosgrove1, J. W. (2001) · AAPG Bulletin · doi:10.1306/8626c997-173b-11d7-8645000102c1865d · Cited by 240
Gas breakthrough experiments on pelitic rocks: comparative study with N2, CO2 and CH4
Hildenbrand, A., Schlömer, S., Krooss, B. M., & Littke, R. (2004) · Geofluids · doi:10.1111/j.1468-8123.2004.00073.x · Cited by 233
Permeability and fluid flow in natural mudstones
Dewhurst, D. N., Yang, Y., & Aplin, A. C. (1999) · Geological Society, London, Special Publications · doi:10.1144/gsl.sp.1999.158.01.03 · Cited by 168
Self-citationDeterminants of Clay and Shale Microfabric Signatures: Processes and Mechanisms
Bennett, R. H., O’Brien, N. R., & Hulbert, M. H. (1991) · Frontiers in Sedimentary Geology · doi:10.1007/978-1-4612-4428-8_2 · Cited by 158
Dewhurst, D. N., Aplin, A. C., & Sarda, J. (1999) · Journal of Geophysical Research Atmospheres · doi:10.1029/1999jb900276 · Cited by 134
Self-citationPetrophysical characteristics of shales from the Scotian Shelf
Katsube, T. J., Mudford, B. S., & Best, M. E. (1991) · Geophysics · doi:10.1190/1.1442980 · Cited by 129
Definition and practical application of mudstone porosity–effective stress relationships
Yang, Y., & Aplin, A. C. (2004) · Petroleum Geoscience · doi:10.1144/1354-079302-567 · Cited by 126
Self-citationHo, N.-C., Peacor, D. R., & van der Pluijm, B. A. (1999) · Clays and Clay Minerals · doi:10.1346/ccmn.1999.0470412 · Cited by 116
Curtis, C. D., Lipshie, S. R., Oertel, G., & Pearson, M. J. (1980) · Sedimentology · doi:10.1111/j.1365-3091.1980.tb01183.x · Cited by 73
MICRO‐FABRICS OF SHALES AND THEIR REARRANGEMENT BY COMPACTION
Heling, D. (1970) · Sedimentology · doi:10.1111/j.1365-3091.1970.tb02188.x · Cited by 48
Cited by
Laboratory characterisation of shale properties
Josh, M., Esteban, L., Delle Piane, C., Sarout, J., Dewhurst, D. N., & Clennell, M. B. (2012) · Journal of Petroleum Science and Engineering · doi:10.1016/j.petrol.2012.01.023 · Cited by 604
Impact of Shale Properties on Pore Structure and Storage Characteristics
Bustin, R. M., Bustin, A. M. M., Cui, X., Ross, D. J. K., & Pathi, V. S. M. (2008) · SPE Shale Gas Production Conference · doi:10.2118/119892-ms · Cited by 514
Davies, R. J., Almond, S., Ward, R. S., Jackson, R. B., Adams, C., Worrall, F., Herringshaw, L. G., Gluyas, J. G., & Whitehead, M. A. (2014) · Marine and Petroleum Geology · doi:10.1016/j.marpetgeo.2014.03.001 · Cited by 476
Frictional and hydrologic properties of clay‐rich fault gouge
Ikari, M. J., Saffer, D. M., & Marone, C. (2009) · Journal of Geophysical Research: Solid Earth · doi:10.1029/2008jb006089 · Cited by 474
Predicting the saturated hydraulic conductivity of soils: a review
Chapuis, R. P. (2012) · Bulletin of Engineering Geology and the Environment · doi:10.1007/s10064-012-0418-7 · Cited by 381
Metadata
- Authors
- Yang, Y., & Aplin, A. C.
- Venue
- Journal of Geophysical Research: Solid Earth
- Publisher
- American Geophysical Union (AGU)
- Published
- 2007-03
- Volume
- 112
- Issue
- B3
- ISSN
- 0148-0227 (ISSN-L)
- OpenAlex
- W2080246391
- Cited by
- 303
- References
- 20
- FWCI
- 13.03
- Type
- journal article
- Language
- en
- Open access
- bronze
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.