CoChat

Predicting postfire sediment yields at the hillslope scale: Testing RUSLE and Disturbed WEPP

Larsen, Isaac J., MacDonald, Lee H. · 2007 · Water Resources Research
Cited by 119

The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.

Abstract

High‐severity wildfires can increase hillslope‐scale sediment yields by several orders of magnitude. Accurate predictions of postfire sediment yields are needed to guide management decisions and assess the potential impact of soil loss on site productivity and downstream aquatic resources. The Revised Universal Soil Loss Equation (RUSLE) and Disturbed WEPP are the most commonly used models to predict postfire sediment yields at the hillslope scale, but neither model has been extensively tested against field data. The objectives of this paper are to (1) compare predicted sediment yields from RUSLE and Disturbed WEPP against 252 plot years of data from nine fires in the Colorado Front Range; and (2) suggest how each model might be improved. Predicted and measured sediment yields were poorly correlated for RUSLE (R 2 = 0.16) and only slightly better correlated for Disturbed WEPP (R 2 = 0.25). Both models tended to over‐predict sediment yields when the measured values were less than 1 Mg ha−1 yr−1 and to under‐predict higher sediment yields. Model accuracy was not improved by increasing the soil erodibility (K) factor in RUSLE and was only slightly improved by slowing the vegetative recovery sequence in Disturbed WEPP. Both models much more accurately predicted the mean sediment yields for hillslopes grouped by fire and severity (R 2 = 0.54 to 0.66) than for individual plots. The performance of RUSLE could be improved by incorporating an erosivity threshold and a nonlinear relationship between rainfall erosivity and sediment yields. The performance of WEPP could be improved by reducing the effective hydraulic conductivity in sites that have recently burned at high severity. The results suggest that neither model can fully capture the complexity of the different controlling factors and the resultant plot‐scale variability in sediment yields.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1029/2006wr005560

Cites

6 of 6 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Cited by

See all 119

Metadata

Authors
Larsen, I. J., & MacDonald, L. H.
Venue
Water Resources Research
Published
2007-11
Volume
43
Issue
11
ISSN
  • 0043-1397 (ISSN-L)
  • 1944-7973
OpenAlex
W2096229910
Cited by
119
References
6
FWCI
5.92
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.