Study of plate deformation and stress in subduction processes using two-dimensional numerical models
Open accessThe DOI matches its Crossref record; 47 of the 47 references it cites were found in a registry or an index.
Abstract
Two‐dimensional finite element modeling is used to model subduction of an oceanic lithospheric plate beneath continental lithosphere. The subduction process is initiated along a preexisting inclined fault and continues until reaching 400 km of total convergence. The lithosphere is assumed to be underlain by an in viscid asthenosphere. Different rheological laws have been considered for the lithosphere, including elasticity and elastoplasticity. The modeling shows that both the stress system in the plates and the surface topography are strongly dependent on two main parameters: the density contrast between lithosphere and asthenosphere (Δρ = ρ L ‐ ρ A ) and the coefficient of friction along the subduction plane. Varying these two parameters allows explanation of the main characteristics of real subduction zones and results in two major regimes manifested by extension or compression in the arc‐back arc system. Extension and back arc rifting corresponds to a positive density contrast and a low coefficient of friction, while negative Δρ values and/or high friction leads to a compressional regime. The coexistence of trench arc compression and back arc tension is only possible for a coefficient of friction lower than 0.1. The results of the numerical experiments agree with those of experimental modeling conducted under similar physical assumptions.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Thermo-mechanical numerical models of convergent margin systems show that stable, one-sided subduction requires a discrete low-strength zone existing between two strong plates (Hassani et al., 1997;Sobolev and Babeyko, 2005;Tagawa et al., 2007), quantitatively defined as an effective coefficient of friction at the plate interface of < 0.1.”
From Secular change and the onset of plate tectonics on Earth (2020) · cites this paper as Hassani et al., 1997
Citations
Cites
Zienkiewicz, O. C. (1989) · Cited by 14,802
Byerlee, J. (1978) · pure and applied geophysics · doi:10.1007/bf00876528 · Cited by 4,029
Geodynamics applications of continuum physics to geological problems
Turcotte, D. L., & Schubert, G. (1982) · Andalas University Repository (Andalas University) · Cited by 1,921
Experimental Rock Deformation — The Brittle Field
(2005) · Springer eBooks · doi:10.1007/b137431 · Cited by 1,660
Geodynamics: Applications of Continuum Physics to Geological Problems
England, P. (1983) · Eos, Transactions American Geophysical Union · doi:10.1029/eo064i011p00106-01 · Cited by 1,605
Back‐arc opening and the mode of subduction
Uyeda, S., & Kanamori, H. (1979) · Journal of Geophysical Research: Solid Earth · doi:10.1029/jb084ib03p01049 · Cited by 1,286
Computational Methods for Transient Analysis
Belytschko, T., Hughes, T. J. R., & Burgers, P. (1985) · Journal of Applied Mechanics · doi:10.1115/1.3169187 · Cited by 1,181
Origin and development of marginal basins in the western Pacific
Karig, D. E. (1971) · Journal of Geophysical Research · doi:10.1029/jb076i011p02542 · Cited by 1,035
Mechanics of fold‐and‐thrust belts and accretionary wedges: Cohesive Coulomb Theory
Dahlen, F. A., Suppe, J., & Davis, D. (1984) · Journal of Geophysical Research: Solid Earth · doi:10.1029/jb089ib12p10087 · Cited by 770
Doglioni, C. (1991) · Terra Nova · doi:10.1111/j.1365-3121.1991.tb00172.x · Cited by 697
Experimental Rock Deformation — The Brittle Field
Paterson, M. S. (1978) · Minerals and Rocks · doi:10.1007/978-3-662-11720-0 · Cited by 541
Molnar, P., & Atwater, T. (1978) · Earth and Planetary Science Letters · doi:10.1016/0012-821x(78)90187-5 · Cited by 469
Depth of seismic coupling along subduction zones
Tichelaar, B. W., & Ruff, L. J. (1993) · Journal of Geophysical Research: Solid Earth · doi:10.1029/92jb02045 · Cited by 458
Constitutive laws for engineering materials, with emphasis on geologic materials
Desai, C. S., & Siriwardane, H. J. (1984) · Infoscience (Ecole Polytechnique Fédérale de Lausanne) · Cited by 387
Lallemand, S. E., Schnürle, P., & Malavieille, J. (1994) · Journal of Geophysical Research: Solid Earth · doi:10.1029/94jb00124 · Cited by 326
On the mechanism of seismic decoupling and back arc spreading at subduction zones
Scholz, C. H., & Campos, J. (1995) · Journal of Geophysical Research: Solid Earth · doi:10.1029/95jb01869 · Cited by 303
Mécanique des milieux continus
Germain, P. (1962) · Masson eBooks · Cited by 296
Tectonic stresses in the lithosphere: Constraints provided by the experimental deformation of rocks
Kirby, S. H. (1980) · Journal of Geophysical Research: Solid Earth · doi:10.1029/jb085ib11p06353 · Cited by 260
Numerical methods in geomechanics
(1984) · Mathematics and Computers in Simulation · doi:10.1016/0378-4754(84)90099-5 · Cited by 225
A microcomputer program for modelling large-strain plasticity problems
Cundall, P. A., & M. Board (1988) · Cited by 220
Stress gradient in arc–back arc regions and plate subduction
Nakamura, K., & Uyeda, S. (1980) · Journal of Geophysical Research: Solid Earth · doi:10.1029/jb085ib11p06419 · Cited by 219
Case for very low coupling stress on the Cascadia Ssubduction Fault
Wang, K., Mulder, T., Rogers, G. C., & Hyndman, R. D. (1995) · Journal of Geophysical Research: Solid Earth · doi:10.1029/95jb00516 · Cited by 219
Constraints on yield strength in the oceanic lithosphere derived from observations of flexure
McNutt, M. K., & Menard, H. W. (1982) · Geophysical Journal International · doi:10.1111/j.1365-246x.1982.tb05994.x · Cited by 202
Numerical integration of rate constitutive equations in finite deformation analysis
Pinsky, P. M., Ortiz, M., & Pister, K. S. (1983) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/0045-7825(83)90087-7 · Cited by 162
Controls on trench topography from dynamic models of subducted slabs
Zhong, S., & Gurnis, M. (1994) · Journal of Geophysical Research: Solid Earth · doi:10.1029/94jb00809 · Cited by 157
Poliakov, A. N. B., Cundall, P. A., Podladchikov, Y., & Lyakhovsky, V. (1993) · Springer eBooks · doi:10.1007/978-94-015-8206-3_12 · Cited by 156
Subduction of the lithosphere and back arc dynamics: Insights from physical modeling
Shemenda, A. I. (1993) · Journal of Geophysical Research Atmospheres · doi:10.1029/93jb01094 · Cited by 154
Narrow subducting slabs and the origin of backarc basins
Dvorkin, J., Nur, A. M., Mavko, G., & Ben‐Avraham, Z. (1993) · Tectonophysics · doi:10.1016/0040-1951(93)90087-z · Cited by 146
Numerical studies of back-arc convection and the formation of marginal basins
Toksöz, M. N., & Hsui, A. T. (1978) · Tectonophysics · doi:10.1016/0040-1951(78)90134-8 · Cited by 145
Delamination and asymmetric lithospheric thickening in the development of the Tyrrhenian Rift
Channell, J. E. T., & Mareschal, J. C. (1989) · Geological Society London Special Publications · doi:10.1144/gsl.sp.1989.045.01.16 · Cited by 129
Flexure of the continental lithosphere with multilayered rheology
Burov, E. B., & Diament, M. (1992) · Geophysical Journal International · doi:10.1111/j.1365-246x.1992.tb00107.x · Cited by 128
Stress and temperature in subduction shear zones: Tonga and Mariana
Bird, P. (1978) · Geophysical Journal International · doi:10.1111/j.1365-246x.1978.tb04280.x · Cited by 121
Factors controlling the style of continental rifting: insights from numerical modelling
Bassi, G. (1991) · Earth and Planetary Science Letters · doi:10.1016/0012-821x(91)90183-i · Cited by 101
Some consequences of the subduction of young slabs
England, P. C., & Wortel, R. (1980) · Earth and Planetary Science Letters · doi:10.1016/0012-821x(80)90028-x · Cited by 100
Geological evidence for a global tectonic polarity
Doglioni, C. (1993) · Journal of the Geological Society · doi:10.1144/gsjgs.150.5.0991 · Cited by 83
Stresses and plate boundary forces associated with subduction plate margins
Whittaker, A., Bott, M. H. P., & Waghorn, G. D. (1992) · Journal of Geophysical Research: Solid Earth · doi:10.1029/91jb00148 · Cited by 75
Plate boundary forces at subduction zones and trench-arc compression
Bott, M. H. P., Waghorn, G. D., & Whittaker, A. (1989) · Tectonophysics · doi:10.1016/0040-1951(89)90099-1 · Cited by 71
Inferences on sediment strength and fault friction from structures at the Aleutian Trench
Davis, D. M., & von Huene, R. (1987) · Geology · doi:10.1130/0091-7613(1987)15<517:iossaf>2.0.co;2 · Cited by 71
Subduction: Insights from Physical Modeling
Shemenda, A. I. (1994) · Medical Entomology and Zoology · Cited by 63
Otsuki, K. (1989) · Tectonophysics · doi:10.1016/0040-1951(89)90171-6 · Cited by 55
The physico-chemical behaviour of the descending lithosphere
Oxburgh, E. R., & Turcotte, D. L. (1976) · Tectonophysics · doi:10.1016/0040-1951(76)90088-3 · Cited by 52
Finite element study of uplift and strain across Vancouver Island
Wang, K., Dragert, H., & Melosh, H. J. (1994) · Canadian Journal of Earth Sciences · doi:10.1139/e94-134 · Cited by 41
Comte, D., & Suárez, G. (1995) · Geophysical Journal International · doi:10.1111/j.1365-246x.1995.tb07005.x · Cited by 40
Channell, J. E. T. (1989) · Medical Entomology and Zoology · Cited by 27
Modélisation numérique de la déformation des systèmes géologiques
Hassani, R. (1994) · Cited by 23
Self-citationThe role of subduction on the horizontal motions in the Tyrrhenian Basin: A numerical model
Giunchi, C., Gasperini, P., Sabadini, R., & D'Agostino, G. (1994) · Geophysical Research Letters · doi:10.1029/94gl00394 · Cited by 15
The style of the Tyrrhenian subduction
Marotta, A. M., & Sabadini, R. (1995) · Geophysical Research Letters · doi:10.1029/95gl00635 · Cited by 14
Research works printed but not linked: 2
- Jean M., 1988, Implementation of unilateral contact and dry friction in computer codes dealing with large deformation problems, J. Mec. Theor. Appl., 7, 145
- Underwood P., 1983, Computational Methods for Transient Analysis, 245
Cited by
Lithosphere tearing at STEP faults: response to edges of subduction zones
Govers, R., & Wortel, M. J. R. (2005) · Earth and Planetary Science Letters · doi:10.1016/j.epsl.2005.03.022 · Cited by 654
“Perpendicular asthenospheric Maxwell BCs have a characteristic decay time that is much larger than the Maxwell time of the asthenosphere; effectively, lateral asthenosphere BCs simulate the compressible asthenosphere beyond the model domain in this case (cf. [ 62 ]).”
BackgroundMOUNTAIN BUILDING, EROSION, AND THE SEISMIC CYCLE IN THE NEPAL HIMALAYA
Avouac, J.-P. (2003) · Advances in Geophysics · doi:10.1016/s0065-2687(03)46001-9 · Cited by 426
“D finite element code (Hassani et al., 1997) initially designed to account for the mechanical layering of the crust.”
BackgroundMethodInfluentialOncken, O., Hindle, D., Kley, J., Elger, K., Victor, P., & Schemmann, K. (2006) · Frontiers in Earth Sciences · doi:10.1007/978-3-540-48684-8_1 · Cited by 349
“…variations in slab pull force, slab anchoring, mantle viscosity, mantle flow patterns, slab length (distance to a slab window that enables the flow of mantle from below to above the subducting plate, as required by rollback), and the strength of the plate interface (see also Hassani et al., 1997).”
BackgroundModeling mountain building and the seismic cycle in the Himalaya of Nepal
Cattin, R., & Avouac, J. P. (2000) · Journal of Geophysical Research: Solid Earth · doi:10.1029/2000jb900032 · Cited by 363
Secular change and the onset of plate tectonics on Earth
Palin, R. M., Santosh, M., Cao, W., Li, S.-S., Hernández-Uribe, D., & Parsons, A. (2020) · Earth-Science Reviews · doi:10.1016/j.earscirev.2020.103172 · Cited by 355
“If subduction could initiate on the early Earth, either locally or globally, what petrophysical and/or geodynamic conditions are required for it to be sustainable? Thermo-mechanical numerical models of convergent margin systems show that stable, one-sided subduction requires a discrete low-strength zone existing betwe…”
Background
Metadata
- Authors
- Hassani, R., Jongmans, D., & Chéry, J.
- Venue
- Journal of Geophysical Research: Solid Earth
- Publisher
- American Geophysical Union (AGU)
- Published
- 1997-08-10
- Volume
- 102
- Issue
- B8
- Pages
- 17951-17965
- ISSN
- 0148-0227 (ISSN-L)
- OpenAlex
- W2058318380
- Cited by
- 196
- References
- 47
- Citations by year
- 2026: 3 · 2025: 3 · 2024: 7 · 2023: 6 · 2022: 11 · 2021: 7 · 2020: 11 · 2019: 3 · 2018: 7 · 2017: 6 · 2016: 11 · 2015: 6 · 2014: 12 · 2013: 5 · 2012: 11
- FWCI
- 3.28
- Type
- journal article
- Language
- en
- Open access
- bronze
- doi.org
- Locations
- Journal of Geophysical Research Atmospheres (publishedVersion)
- Topics
- Physical Sciences › Earth and Planetary Sciences › Geophysics › earthquake and tectonic studies
- Physical Sciences › Earth and Planetary Sciences › Geology › Geological and Geophysical Studies
- Physical Sciences › Earth and Planetary Sciences › Geophysics › Geological and Geophysical Studies Worldwide
- Keywords
- subduction, plate deformation, lithospheric stress, back-arc extension, subduction initiation, surface topography
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.