Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat
Cited by 814

The DOI matches its Crossref record; 41 of the 41 references it cites were found in a registry or an index.

Rheology of synthetic olivine aggregates: Influence of grain size and water

Karato, Shun‐Ichiro, Paterson, Mervyn S., FitzGerald, John D. · 1986 · Journal of Geophysical Research: Solid Earth

Abstract

The influence of grain size and water content on the high‐temperature plasticity of olivine aggregates was studied, using a gas‐medium high‐pressure deformation apparatus. The specimens used were hot‐pressed, dense olivine aggregates with controlled grain size ranging from a few to 70 μm, with or without added water. Mechanical tests were made at 1573 K and 300 MPa confining pressure and at strain rates of 10−3 to 10−6 s−1. The results reveal two distinct mechanisms of deformation, depending on stress level and grain size. At relatively high stress and large grain size, the strain rate is proportional to about the cube power of the stress and is nearly independent of grain size. In this regime, microstructural observations gave evidence of intragranular deformation involving dislocation motion. At low stress and small grain size, the strain rate depends almost linearly on stress and decreases markedly with increase in grain size. In the latter regime, little evidence was found for intragranular deformation. These observations suggest that the deformation mechanism in the grain size insensitive regime is dislocation creep, while that in the grain size sensitive regime is diffusion creep. In both regimes, water was found to enhance the creep rate. The absence of grain size sensitivity in the dislocation creep regime and comparison with single‐crystal data indicate that the water weakening effect is mainly an intragranular process. However, the existence also of a water weakening effect in the diffusion creep regime indicates that water also enhances diffusion. The extrapolation of the present results to coarser grain sizes indicates that the transition from dislocation to diffusion creep occurs at 0.1–1 MPa for 10‐mm grain size. Therefore it is suggested that this transition may occur in the upper mantle and that, in both regimes, the presence of trace amounts of water will result in significantly lower creep strength than under strictly “dry” conditions.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1029/jb091ib08p08151

Cites

41 of 41 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 41 references

Cited by

Metadata

Authors
Karato, S., Paterson, M. S., & FitzGerald, J. D.
Venue
Journal of Geophysical Research: Solid Earth
Published
1986-07-10
Volume
91
Issue
B8
Pages
8151-8176
ISSN
0148-0227 (ISSN-L)
OpenAlex
W2103711815
Cited by
814
References
41
FWCI
6.78
Type
journal article
Language
en
Open access
closed

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.