The DOI matches its Crossref record; 65 of the 65 references it cites were found in a registry or an index.
Thin-film metal oxides in organic semiconductor devices: their electronic structures, work functions and interfaces
Open accessAbstract
Thin-film metal oxides are among the key materials used in organic semiconductor devices. As there are no intrinsic charge carriers in a typical organic semiconductor, all charges in the device must be injected from electrode/organic interfaces, whose energetic structure consequentially dictates the performance of devices. The energy barrier at the interface depends critically on the work function of the electrode. For this reason, various types of thin-film metal oxides can be used as a buffer layer to modify the electrode work function. This paper provides a review on recent progress in metal oxide/organic interface energetics, oxide valence structure and work function, as well as the impact of defects and interfacial reactions on oxide work functions. This review provides a rational guide to process engineers in selecting the best suitable electrode/oxide structures for a targeted applications. Organic semiconductors offer an attractive alternative to the traditional, silicon-based components of electronic devices. Cheaper to produce and more sustainable, they can also introduce different attributes, such as flexibility, to these devices. However, as organic materials do not typically possess intrinsic charge carriers — electrons or holes — all charges in the device must originate from the electrode and pass through the electrode-organic material interface, a process hindered by an energy barrier. Mark Greiner and Zheng-Hong Lu review recent achievements in a versatile class of buffer layer — thin films of transition metal oxides — that can be positioned between the two materials to reduce the energy barrier that limits charge injection. The researchers discuss how to select the most suitable metal oxide for a specific purpose, and then tune the thin film's properties by adjusting the thickness of the metal oxide layer, the oxidation state of its cations and the concentration of its defects. Over the last decade, metal oxides have proven to be important materials for organic electronics. Oxides are often used as charge-injection and charge-selective interlayers to engineer the electrical resistance at electrode/organic interfaces in organic devices. An oxide’s behavior as an interlayer depends strongly on the oxide’s electronic properties—such as its band structure and work function. The numerous degrees of freedom in an oxide’s electronic properties allow these characteristics to be easily modified. The present review outlines the use of metal oxides in organic electronics, and discusses the factors that affect the oxide’s properties that are relevant to oxide/organic interfaces.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Imada, M., Fujimori, A., & Tokura, Y. (1998) · Reviews of Modern Physics · doi:10.1103/revmodphys.70.1039 · Cited by 7,599
Electron correlations in narrow energy bands
Hubbard, J. (1963) · Proceedings of the Royal Society of London. Series A. Mathematical and Physical Sciences · doi:10.1098/rspa.1963.0204 · Cited by 6,699
Enhanced power-conversion efficiency in polymer solar cells using an inverted device structure
He, Z., Zhong, C., Su, S., Xu, M., Wu, H., & Cao, Y. (2012) · Nature Photonics · doi:10.1038/nphoton.2012.190 · Cited by 3,764
Efficient Tandem Polymer Solar Cells Fabricated by All-Solution Processing
Kim, J. Y., Lee, K., Coates, N. E., Moses, D., Nguyen, T.-Q., Dante, M., & Heeger, A. J. (2007) · Science · doi:10.1126/science.1141711 · Cited by 3,270
Ishii, H., Sugiyama, K., Ito, E., & Seki, K. (1999) · Advanced Materials · doi:10.1002/(sici)1521-4095(199906)11:8<605::aid-adma605>3.0.co;2-q · Cited by 3,188
Band gaps and electronic structure of transition-metal compounds
Zaanen, J., Sawatzky, G. A., & Allen, J. W. (1985) · Physical Review Letters · doi:10.1103/physrevlett.55.418 · Cited by 3,064
2.5% efficient organic plastic solar cells
Shaheen, S. E., Brabec, C. J., Sariciftci, N. S., Padinger, F., Fromherz, T., & Hummelen, J. C. (2001) · Applied Physics Letters · doi:10.1063/1.1345834 · Cited by 2,613
The surface science of metal oxides
(1995) · Materials Characterization · doi:10.1016/1044-5803(95)80013-1 · Cited by 2,372
The interaction of water with solid surfaces: fundamental aspects revisited
Henderson, M. (2002) · Surface Science Reports · doi:10.1016/s0167-5729(01)00020-6 · Cited by 2,299
A Universal Method to Produce Low–Work Function Electrodes for Organic Electronics
Zhou, Y., Fuentes-Hernandez, C., Shim, J., Meyer, J., Giordano, A. J., Li, H., Winget, P., Papadopoulos, T., Cheun, H., Kim, J., et al. (2012) · Science · doi:10.1126/science.1218829 · Cited by 2,140
Cited by
Recent Developments in p‐Type Oxide Semiconductor Materials and Devices
Wang, Z., Nayak, P. K., Caraveo‐Frescas, J. A., & Alshareef, H. N. (2016) · Advanced Materials · doi:10.1002/adma.201503080 · Cited by 779
Influence of iron doping on tetravalent nickel content in catalytic oxygen evolving films
Li, N., Bediako, D. K., Hadt, R. G., Hayes, D., Kempa, T. J., von Cube, F., Bell, D. C., Chen, L. X., & Nocera, D. G. (2017) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1620787114 · Cited by 700
Lüssem, B., Keum, C.-M., Kasemann, D., Naab, B., Bao, Z., & Leo, K. (2016) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00329 · Cited by 627
Limitations of the Tauc Plot Method
Klein, J., Kampermann, L., Mockenhaupt, B., Behrens, M., Strunk, J., & Bacher, G. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202304523 · Cited by 617
Layered memristive and memcapacitive switches for printable electronics
Bessonov, A. A., Kirikova, M. N., Petukhov, D. I., Allen, M., Ryhänen, T., & Bailey, M. J. A. (2015) · Nature Materials · doi:10.1038/nmat4135 · Cited by 535
Electronic defects in metal oxide photocatalysts
Pastor, E., Sachs, M., Selim, S., Durrant, J. R., Bakulin, A. A., & Walsh, A. (2022) · Nature Reviews Materials · doi:10.1038/s41578-022-00433-0 · Cited by 534
Transparent Electrodes for Efficient Optoelectronics
Morales‐Masis, M., De Wolf, S., Woods‐Robinson, R., Ager, J. W., & Ballif, C. (2017) · Advanced Electronic Materials · doi:10.1002/aelm.201600529 · Cited by 462
Chen, H., Zhang, W., Li, M., He, G., & Guo, X. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00532 · Cited by 392
Fermi Level Pinning Dependent 2D Semiconductor Devices: Challenges and Prospects
Liu, X., Choi, M. S., Hwang, E., Yoo, W. J., & Sun, J. (2022) · Advanced Materials · doi:10.1002/adma.202108425 · Cited by 388
Organic semiconductor density of states controls the energy level alignment at electrode interfaces
Oehzelt, M., Koch, N., & Heimel, G. (2014) · Nature Communications · doi:10.1038/ncomms5174 · Cited by 387
Two-Dimensional Transition Metal Oxide and Chalcogenide-Based Photocatalysts
Haque, F., Daeneke, T., Kalantar-zadeh, K., & Ou, J. Z. (2018) · Nano-Micro Letters · doi:10.1007/s40820-017-0176-y · Cited by 368
Contact Resistance in Organic Field‐Effect Transistors: Conquering the Barrier
Waldrip, M., Jurchescu, O. D., Gundlach, D. J., & Bittle, E. G. (2020) · Advanced Functional Materials · doi:10.1002/adfm.201904576 · Cited by 333
The 2016 oxide electronic materials and oxide interfaces roadmap
Lorenz, M., Ramachandra Rao, M. S., Venkatesan, T., Fortunato, E., Barquinha, P., Branquinho, R., Salgueiro, D., Martins, R., Carlos, E., Liu, A., et al. (2016) · Journal of Physics D: Applied Physics · doi:10.1088/0022-3727/49/43/433001 · Cited by 314
Najafi, L., Taheri, B., Martín-García, B., Bellani, S., Di Girolamo, D., Agresti, A., Oropesa-Nuñez, R., Pescetelli, S., Vesce, L., Calabrò, E., et al. (2018) · ACS Nano · doi:10.1021/acsnano.8b05514 · Cited by 264
Metadata
- Authors
- Greiner, M. T., & Lu, Z.-H.
- Venue
- NPG Asia Materials
- Published
- 2013-07
- Volume
- 5
- Issue
- 7
- Pages
- e55-e55
- ISSN
- 1884-4049 (ISSN-L)
- 1884-4057
- OpenAlex
- W1999353473
- Cited by
- 444
- References
- 65
- FWCI
- 17.77
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.