The DOI matches its Crossref record; 148 of the 148 references it cites were found in a registry or an index.
Ultrafast laser processing of materials: from science to industry
Open accessAbstract
Processing of materials by ultrashort laser pulses has evolved significantly over the last decade and is starting to reveal its scientific, technological and industrial potential. In ultrafast laser manufacturing, optical energy of tightly focused femtosecond or picosecond laser pulses can be delivered to precisely defined positions in the bulk of materials via two-/multi-photon excitation on a timescale much faster than thermal energy exchange between photoexcited electrons and lattice ions. Control of photo-ionization and thermal processes with the highest precision, inducing local photomodification in sub-100-nm-sized regions has been achieved. State-of-the-art ultrashort laser processing techniques exploit high 0.1–1 μm spatial resolution and almost unrestricted three-dimensional structuring capability. Adjustable pulse duration, spatiotemporal chirp, phase front tilt and polarization allow control of photomodification via uniquely wide parameter space. Mature opto-electrical/mechanical technologies have enabled laser processing speeds approaching meters-per-second, leading to a fast lab-to-fab transfer. The key aspects and latest achievements are reviewed with an emphasis on the fundamental relation between spatial resolution and total fabrication throughput. Emerging biomedical applications implementing micrometer feature precision over centimeter-scale scaffolds and photonic wire bonding in telecommunications are highlighted.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Photonic Crystals: Molding the Flow of Light
Joannopoulos, J. D., Johnson, S. G., Winn, J. N., & Meade, R. D. (1995) · Cited by 7,965
Durnin, J., Miceli, J. J., & Eberly, J. H. (1987) · Physical Review Letters · doi:10.1103/physrevlett.58.1499 · Cited by 3,667
Femtosecond laser micromachining in transparent materials
Gattass, R. R., & Mazur, E. (2008) · Nature Photonics · doi:10.1038/nphoton.2008.47 · Cited by 3,247
The Tipping Point: How Little Things Can Make a Big Difference
Meadows-Klue, D. (2004) · Interactive Marketing · doi:10.1057/palgrave.im.4340262 · Cited by 3,032
Finer features for functional microdevices
Kawata, S., Sun, H.-B., Tanaka, T., & Takada, K. (2001) · Nature · doi:10.1038/35089130 · Cited by 2,871
Gold Helix Photonic Metamaterial as Broadband Circular Polarizer
Gansel, J. K., Thiel, M., Rill, M. S., Decker, M., Bade, K., Saile, V., von Freymann, G., Linden, S., & Wegener, M. (2009) · Science · doi:10.1126/science.1177031 · Cited by 2,694
Writing waveguides in glass with a femtosecond laser
Davis, K. M., Miura, K., Sugimoto, N., & Hirao, K. (1996) · Optics Letters · doi:10.1364/ol.21.001729 · Cited by 2,622
Continuous liquid interface production of 3D objects
Tumbleston, J. R., Shirvanyants, D., Ermoshkin, N., Janusziewicz, R., Johnson, A. R., Kelly, D., Chen, K., Pinschmidt, R., Rolland, J. P., Ermoshkin, A., et al. (2015) · Science · doi:10.1126/science.aaa2397 · Cited by 2,278
Three-dimensional microfabrication with two-photon-absorbed photopolymerization
Maruo, S., Nakamura, O., & Kawata, S. (1997) · Optics Letters · doi:10.1364/ol.22.000132 · Cited by 1,952
Ultrafast lasers—reliable tools for advanced materials processing
Sugioka, K., & Cheng, Y. (2014) · Light: Science & Applications · doi:10.1038/lsa.2014.30 · Cited by 1,545
Research works printed but not linked: 34
- Butkus S, Gaizauskas E, Paipulas D, Viburys Z, Kaskelyte D et al. Rapid microfabrication of transparent materials using filamented femtosecond laser pulses. Appl Phys A 2014; 114: 81–90. · doi:10.1007/s00339-013-8108-2
- Matsumoto H, Unrath M, Zhang HB, Hainsey B . Laser direct ablation for patterning printed wiring boards using ultra-fast lasers and high speed beam delivery architectures. J Laser Micro Nanoeng 2013; 8: 315–320. · doi:10.2961/jlmn.2013.03.0022
- Shank CV, Yen R, Hirlimann C . Time-resolved reflectivity measurements of femtosecond-optical-pulse-induced phase transitions in silicon. Phys Rev Lett 1983; 50: 454–457. · doi:10.1103/physrevlett.50.454
- Zukauskas A, Bataviciute G, Sciuka M, Balevicius Z, Melninkaitis A et al. Effect of the photoinitiator presence and exposure conditions on laser-induced damage threshold of ORMOSIL (SZ2080). Opt Mat 2015; 39: 224–231. · doi:10.1016/j.optmat.2014.11.031
- Li Y, Qi FJ, Yang H, Gong QH, Dong XZ et al. Nonuniform shrinkage and stretching of polymerized nanostructures fabricated by two-photon photopolymerization. Nanotechnology 2008; 19: 055303. · doi:10.1088/0957-4484/19/05/055303
- Tielen V, Bellouard Y . Three-dimensional glass monolithic micro-flexure fabricated by femtosecond laser exposure and chemical etching. Micromachines 2014; 5: 697–710. · doi:10.3390/mi5030697
- Zukauskas A, Melissinaki V, Kaskelyte D, Farsari M, Malinauskas M . Improvement of the fabrication accuracy of fiber tip microoptical components via mode field expansion. J Laser Micro Nanoeng 2014; 9: 68–72. · doi:10.2961/jlmn.2014.01.0014
- Xu JJ, Yao WG, Tian ZN, Wang L, Guan KM et al. High curvature concave–convex microlens. IEEE Photon Technol Lett 2015; 27: 2465–2468. · doi:10.1109/lpt.2015.2470195
- Tian ZN, Yao WG, Xu JJ, Yu YH, Chen QD et al. Focal varying microlens array. Opt Lett 2015; 40: 4222–4225. · doi:10.1364/ol.40.004222
- Jin P, Gao YL, Liu TT, Li XJ, Tan JB . Resist shaping for replication of micro-optical elements with continuous relief in fused silica. Opt Lett 2010; 35: 1169–1171. · doi:10.1364/ol.35.001169
- Gao YL, Lin J, Jin P, Tan JB, Davies G et al. Stop grating for perfect replication of micro Fresnel lens by thermal imprinting. J Micromech Microeng 2012; 22: 065018. · doi:10.1088/0960-1317/22/6/065018
- Mizeikis V, Purlys V, Buividas R, Juodkazis S . Realization of structural color by direct laser write technique in photoresist. J Laser Micro Nanoeng 2014; 9: 42–45. · doi:10.2961/jlmn.2014.01.0009
- Malinauskas M, Rekstyte S, Jonavicius T, Mizeikis V, Gamaly E et al. Femtosecond pulsed light polarization induced peculiarities in direct laser writing 3D nanolithography. Proc. CLEO 2015; CM1: 2.
- Gamaly EG, Rapp L, Roppo V, Juodkazis S, Rode AV . Generation of high energy density by fs-laser induced confined microexplosion. New J Phys 2013; 15: 025018. · doi:10.1088/1367-2630/15/2/025018
- Gamaly EG, Vailionis A, Mizeikis V, Yang W, Rode AV et al. Warm dense matter at the bench-top: Fs-laser induced confined microexplosion. High Energ Dens Phys 2012; 8: 13–17. · doi:10.1016/j.hedp.2011.10.003
- Juodkazis S, Nishimura K, Misawa H, Ebisui T, Waki R et al. Control over the crystalline state of sapphire. Adv Mater 2006; 18: 1361–1364. · doi:10.1002/adma.200501837
- Vailionis A, Gamaly EG, Mizeikis V, Yang WG, Rode AV et al. Evidence of super-dense aluminium synthesized by ultra-fast micro-explosion. Nat Commun 2011; 2: 445. · doi:10.1038/ncomms1449
- Juodkazis S, Misawa H, Gamaly EG, Luther-Davis B, Hallo L et al. Is the nano-explosion really microscopic? J Non-Crystall Solids 2009; 355: 1160–1162. · doi:10.1016/j.jnoncrysol.2009.02.013
- Kudrius T, Slekys G, Juodkazis S . Surface-texturing of sapphire by femtosecond laser pulses for photonic applications. J Phys D: Appl Phys 2010; 43: 145501. · doi:10.1088/0022-3727/43/14/145501
- Juodkazis S, Nishi Y, Misawa H . Femtosecond laser-assisted formation of channels in sapphire using KOH solution. RRL-Phys Stat Sol 2008; 2: 275–277. · doi:10.1002/pssr.200802203
- Juodkazis S, Nishimura K, Misawa H . Three-dimensional laser structuring of materials at tight focusing. Chin Opt Lett 2007; 5: S198–S200.
- Hatanaka K, Ida T, Ono H, Matsushima SI, Fukumura H et al. Chirp effect in hard X-ray generation from liquid target when irradiated by femtosecond pulses. Opt Express 2008; 16: 12650–12657. · doi:10.1364/oe.16.012650
- Sano T, Iwasaki S, Ozeki Y, Itoh K, Hirose A . Femtosecond laser direct joining of copper with polyethylene terephthalate. Mater Trans 2013; 54: 926–930. · doi:10.2320/matertrans.md201229
- Jovanovic N, Spaleniak I, Gross S, Ireland M, Lawrence JS et al. Integrated photonic building blocks for next-generation astronomical instrumentation I: the multimode waveguide. Opt Express 2012; 20: 17029–17043. · doi:10.1364/oe.20.017029
- Spaleniak I, Jovanovic N, Gross S, Ireland MJ, Lawrence JS et al. Integrated photonic building blocks for next-generation astronomical instrumentation II: the multimode to single mode transition. Opt Express 2013; 21: 27197–27208. · doi:10.1364/oe.21.027197
- Christensen CM . The Innovator’s Dilemma: When New Technologies Cause Great Firms to Fail. Boston, MA: Harvard Business School Press; 1997.
- Clayton AHA . Cell surface receptors in the 21st century. AIMS Biophys 2014; 1: 51–52. · doi:10.3934/biophy.2014.1.51
- Piqué A, Kim H . Laser-induced forward transfer of functional materials: advances and future directions. J Laser Micro Nanoeng 2014; 9: 192–197. · doi:10.2961/jlmn.2014.03.0002
- Danieliene E, Gabryte E, Danielius R, Vengris M, Vaiceliunaite A et al. Corneal stromal ablation with femtosecond ultraviolet pulses in rabbits. J Cataract Refract Surg 2012; 39: 258–267. · doi:10.1016/j.jcrs.2012.09.022
- Waller EH, von Freymann G . Multi foci with diffraction limited resolution. Opt Express 2013; 21: 21708–21713. · doi:10.1364/oe.21.021708
- Gedvilas M, Miksys J, Raciukaitis G . Flexible periodical micro- and nano-structuring of a stainless steel surface using dual-wavelength double-pulse picosecond laser irradiation. RSC Adv 2015; 5: 75075–75080. · doi:10.1039/c5ra14210e
- Cumming BP, Jesacher A, Booth MJ, Wilson T, Gu M . Adaptive aberration compensation for three-dimensional micro-fabrication of photonic crystals in lithium niobate. Opt Express 2011; 19: 9419–9425. · doi:10.1364/oe.19.009419
- Rogel-Salazar J, Jiménez-Romero HA, Chávez-Cerda S . Full characterization of Airy beams under physical principles. Phys Rev A 2014; 89: 023807. · doi:10.1103/physreva.89.023807
- Marcinkevicius A, Juodkazis S, Matsuo S, Mizeikis V, Misawa H . Application of Bessel beams for microfabrication of dielectrics by femtosecond laser. Jpn J Appl Phys 2001; 40: L1197–L1199. · doi:10.1143/jjap.40.l1197
Cited by
Jiang, L., Wang, A.-D., Li, B., Cui, T.-H., & Lu, Y.-F. (2017) · Light: Science & Applications · doi:10.1038/lsa.2017.134 · Cited by 513
Electrospun Fibrous Scaffolds for Tissue Engineering: Viewpoints on Architecture and Fabrication
Jun, I., Han, H.-S., Edwards, J., & Jeon, H. (2018) · International Journal of Molecular Sciences · doi:10.3390/ijms19030745 · Cited by 467
Wang, H., Zhang, W., Ladika, D., Yu, H., Gailevičius, D., Wang, H., Pan, C., Nair, P. N. S., Ke, Y., Mori, T., et al. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202214211 · Cited by 401
Self-citationExperimental demonstration of a three-dimensional lithium niobate nonlinear photonic crystal
Wei, D., Wang, C., Wang, H., Hu, X., Wei, D., Fang, X., Zhang, Y., Wu, D., Hu, Y., Li, J., et al. (2018) · Nature Photonics · doi:10.1038/s41566-018-0240-2 · Cited by 356
Nanoparticles Engineering by Pulsed Laser Ablation in Liquids: Concepts and Applications
Fazio, E., Gökce, B., De Giacomo, A., Meneghetti, M., Compagnini, G., Tommasini, M., Waag, F., Lucotti, A., Zanchi, C. G., Ossi, P. M., et al. (2020) · Nanomaterials · doi:10.3390/nano10112317 · Cited by 346
“There are many literature papers on laser interaction with hard, soft and smart materials, targeting future applications in the fields of energy production (nano-energy) and biomedicine [8], as well as recent progress in the understanding of the fundamental mechanisms involved in laser processing [9].”
BackgroundAdaptive optics in laser processing
Salter, P. S., & Booth, M. J. (2019) · Light: Science & Applications · doi:10.1038/s41377-019-0215-1 · Cited by 321
3D Laser Micro‐ and Nanoprinting: Challenges for Chemistry
Barner‐Kowollik, C., Bastmeyer, M., Blasco, E., Delaittre, G., Müller, P., Richter, B., & Wegener, M. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201704695 · Cited by 280
Hybrid multi-chip assembly of optical communication engines by in situ 3D nano-lithography
Blaicher, M., Billah, M. R., Kemal, J., Hoose, T., Marin-Palomo, P., Hofmann, A., Kutuvantavida, Y., Kieninger, C., Dietrich, P.-I., Lauermann, M., et al. (2020) · Light: Science & Applications · doi:10.1038/s41377-020-0272-5 · Cited by 176
Ultrafast Laser Additive Manufacturing: A Review
Saunders, J., Elbestawi, M., & Fang, Q. (2023) · Journal of Manufacturing and Materials Processing · doi:10.3390/jmmp7030089 · Cited by 35
Metadata
- Authors
- Malinauskas, M., Žukauskas, A., Hasegawa, S., Hayasaki, Y., Mizeikis, V., Buividas, R., & Juodkazis, S.
- Venue
- Light: Science & Applications
- Published
- 2016-03-14
- Volume
- 5
- Issue
- 8
- Pages
- e16133-e16133
- ISSN
- 2047-7538 (ISSN-L)
- OpenAlex
- W2514605621
- Cited by
- 1,364
- References
- 148
- FWCI
- 97.58
- Type
- journal article
- Language
- en
- Open access
- gold
- Licence
- creativecommons.org/licenses/by/4.0 (tdm)
- creativecommons.org/licenses/by/4.0 (vor)
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.