Machine-learning-assisted materials discovery using failed experiments
The DOI matches its Crossref record; 38 of the 38 references it cites were found in a registry or an index.
Abstract
Inorganic-organic hybrid materials such as organically templated metal oxides, metal-organic frameworks (MOFs) and organohalide perovskites have been studied for decades, and hydrothermal and (non-aqueous) solvothermal syntheses have produced thousands of new materials that collectively contain nearly all the metals in the periodic table. Nevertheless, the formation of these compounds is not fully understood, and development of new compounds relies primarily on exploratory syntheses. Simulation- and data-driven approaches (promoted by efforts such as the Materials Genome Initiative) provide an alternative to experimental trial-and-error. Three major strategies are: simulation-based predictions of physical properties (for example, charge mobility, photovoltaic properties, gas adsorption capacity or lithium-ion intercalation) to identify promising target candidates for synthetic efforts; determination of the structure-property relationship from large bodies of experimental data, enabled by integration with high-throughput synthesis and measurement tools; and clustering on the basis of similar crystallographic structure (for example, zeolite structure classification or gas adsorption properties). Here we demonstrate an alternative approach that uses machine-learning algorithms trained on reaction data to predict reaction outcomes for the crystallization of templated vanadium selenites. We used information on 'dark' reactions--failed or unsuccessful hydrothermal syntheses--collected from archived laboratory notebooks from our laboratory, and added physicochemical property descriptions to the raw notebook information using cheminformatics techniques. We used the resulting data to train a machine-learning model to predict reaction success. When carrying out hydrothermal synthesis experiments using previously untested, commercially available organic building blocks, our machine-learning model outperformed traditional human strategies, and successfully predicted conditions for new organically templated inorganic product formation with a success rate of 89 per cent. Inverting the machine-learning model reveals new hypotheses regarding the conditions for successful product formation.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“For example, in experimental data sets extracted from the literature (14,15,19), there can be positive bias for reporting only successful experiments (16, 107, 108), leading to challenges in classification tasks (17).”
From Machine Learning for the Discovery, Design, and Engineering of Materials. (2022) · cites this paper as [108]
In the citing paper
“ML has had recent success in predicting specific chemical, material, and optical properties without the need for expensive experimentation or brute-force simulation [105,299,490,653], including in aerosols [465,500].”
From Tackling climate change with machine learning (2023) · cites this paper as [653]
Citations
Cites
Cortes, C., & Vapnik, V. (1995) · Machine Learning · doi:10.1007/bf00994018 · Cited by 59,421
Cortes, C., & Vapnik, V. (1995) · Machine-mediated learning · doi:10.1023/a:1022627411411 · Cited by 48,445
LIBSVM: A library for support vector machines
Chang, C.-C., & Lin, C.-J. (2011) · ACM Transactions on Intelligent Systems and Technology · doi:10.1145/1961189.1961199 · Cited by 40,918 · cited 1×
“The SVM was implemented in WEKA 3.7 32,33 ; this implementation included a built-in data-normalization step.”
MethodInfluentialThe Elements of Statistical Learning
Hastie, T., Friedman, J., & Tibshirani, R. (2001) · Springer Series in Statistics · doi:10.1007/978-0-387-21606-5 · Cited by 24,162
The WEKA data mining software: an update
Hall, M., Frank, E., Holmes, G., Pfahringer, B., Reutemann, P., & Witten, I. H. (2009) · ACM SIGKDD Explorations Newsletter · doi:10.1145/1656274.1656278 · Cited by 17,750 · cited 2×
“All data were relabelled with the predicted outcomes of the SVM model and a C4.5 decision tree (implemented in WEKA 3.7) 32 was used to model those predicted outcomes 39 .”
MethodInfluentialThe Cambridge Structural Database: a quarter of a million crystal structures and rising
Allen, F. H. (2002) · Acta Crystallographica Section B Structural Science · doi:10.1107/s0108768102003890 · Cited by 9,898 · cited 2×
“Organically templated metal oxides using these diamines are essentially unknown, as indicated by their near absence from the Cambridge Structural Database 26 (see Methods).”
BackgroundText categorization with Support Vector Machines: Learning with many relevant features
Joachims, T. (1998) · Lecture Notes in Computer Science · doi:10.1007/bfb0026683 · Cited by 7,999
Introduction to Metal–Organic Frameworks
Zhou, H.-C., Long, J. R., & Yaghi, O. M. (2012) · Chemical Reviews · doi:10.1021/cr300014x · Cited by 7,720 · cited 1×
“Inorganic–organic hybrid materials 1–3 such as organically templated metal oxides 1 , metal–organic frameworks (MOFs) 2 and organohalide perovskites 4 have been studied for decades, and hydrothermal and (non-aqueous) solvothermal syntheses have produced thousands of new materials that collectively…”
BackgroundMetal-halide perovskites for photovoltaic and light-emitting devices
Stranks, S. D., & Snaith, H. J. (2015) · Nature Nanotechnology · doi:10.1038/nnano.2015.90 · Cited by 3,392 · cited 1×
“Inorganic–organic hybrid materials 1–3 such as organically templated metal oxides 1 , metal–organic frameworks (MOFs) 2 and organohalide perovskites 4 have been studied for decades, and hydrothermal and (non-aqueous) solvothermal syntheses have produced thousands of new materials that collectively…”
BackgroundOpen-Framework Inorganic Materials
Cheetham, A. K., Férey, G., & Loiseau, T. (1999) · Angewandte Chemie International Edition · doi:10.1002/(sici)1521-3773(19991115)38:22<3268::aid-anie3268>3.0.co;2-u · Cited by 2,426 · cited 1×
“…templated metal oxides 1 , metal–organic frameworks (MOFs) 2 and organohalide perovskites 4 have been studied for decades, and hydrothermal and (non-aqueous) solvothermal syntheses have produced thousands of new materials that collectively contain nearly all the metals in the periodic table 5–9 .”
Background
Cited by
Items 301–400 of 1,006
Schrier, J., Norquist, A. J., Buonassisi, T., & Brgoch, J. (2023) · Journal of the American Chemical Society · doi:10.1021/jacs.3c04783 · Cited by 117
Self-citationSuh, C., Fare, C., Warren, J. A., & Pyzer‐Knapp, E. O. (2020) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-082019-105100 · Cited by 113
“As Norquist and colleagues (69) pointed out, failed experiments are a great source of information for the next set of successful experiments.”
BackgroundNippa, D. F., Atz, K., Hohler, R., Müller, A. T., Marx, A., Bartelmus, C., Wuitschik, G., Marzuoli, I., Jost, V., Wolfard, J., et al. (2023) · Nature Chemistry · doi:10.1038/s41557-023-01360-5 · Cited by 110
“[19–21] In combination with FAIR (Findability, Accessibility, Interoperability, Reusability) [22] documentation, which generates high-quality data sets on successful and failed reactions [23, 24], HTE provides a foundation to unlock LSF for drug discovery by enabling advanced data analysis and machine learning.”
MethodNavigating phase diagram complexity to guide robotic inorganic materials synthesis
Chen, J., Cross, S. R., Miara, L. J., Cho, J., Wang, Y. E., & Sun, W. Q. (2024) · Nature Synthesis · doi:10.1038/s44160-024-00502-y · Cited by 116
“These counter examples provide valuable ‘failed synthesis’ results 49 to quantify bounds where our precursor selection principles offer less certainty of success, and can serve as soft cutoff energies for future algorithms for solid-state precursor prediction—although we note that many reactions…”
Ruan, J., Xu, W., Yang, T., Yu, J., Yang, S., Luan, J., Omori, T., Wang, C., Kainuma, R., Ishida, K., et al. (2020) · Acta Materialia · doi:10.1016/j.actamat.2020.01.004 · Cited by 101
Wu, X., Zhou, Q., Li, M., & Hu, X. (2022) · Journal of Hazardous Materials · doi:10.1016/j.jhazmat.2022.129487 · Cited by 103
Lin, J., Liu, Z., Guo, Y., Wang, S., Zhang, T., Xue, X., Li, R., Feng, S., Wang, L., Liu, J., et al. (2023) · Nano Today · doi:10.1016/j.nantod.2023.101802 · Cited by 103
Leveraging machine learning in porous media
Delpisheh, M., Ebrahimpour, B., Fattahi, A., Siavashi, M., Mir, H., Mashhadimoslem, H., Abdol, M. A., Ghorbani, M., Shokri, J., Niblett, D., et al. (2024) · Journal of Materials Chemistry A · doi:10.1039/d4ta00251b · Cited by 107
Making the collective knowledge of chemistry open and machine actionable
Jablonka, K. M., Patiny, L., & Smit, B. (2022) · Nature Chemistry · doi:10.1038/s41557-022-00910-7 · Cited by 85
“However, for this to work we need to report data in a format that can be used in machine learning, and also report ‘failed’ experiments 15,16 .”
BackgroundMachine learning integrated photocatalysis: progress and challenges
Ge, L., Ke, Y., & Li, X. (2023) · Chemical Communications · doi:10.1039/d3cc00989k · Cited by 99
Artificial intelligence and scientific discovery: a model of prioritized search
Agrawal, A. K., McHale, J., & Oettl, A. (2024) · Research Policy · doi:10.1016/j.respol.2024.104989 · Cited by 124
Dossi, N., Toniolo, R., Terzi, F., Grazioli, C., Svigelj, R., Gobbi, F., & Bontempelli, G. (2006) · Electroanalysis · doi:10.1002/(issn)1521-4109 · Cited by 98
Oliynyk, A. O., Adutwum, L. A., Rudyk, B. W., Pisavadia, H., Lotfi, S., Hlukhyy, V., Harynuk, J. J., Mar, A., & Brgoch, J. (2017) · Journal of the American Chemical Society · doi:10.1021/jacs.7b08460 · Cited by 95
Nanoinformatics, and the big challenges for the science of small things
Barnard, A. S., Motevalli, B., Parker, A. J., Fischer, J. M. T. A., Feigl, C. A., & Opletal, G. (2019) · Nanoscale · doi:10.1039/c9nr05912a · Cited by 104
Processing parameter correlations in material extrusion additive manufacturing
Braconnier, D. J., Jensen, R. E., & Peterson, A. M. (2019) · Additive manufacturing · doi:10.1016/j.addma.2019.100924 · Cited by 97
A general and transferable deep learning framework for predicting phase formation in materials
Feng, S., Fu, H., Zhou, H., Wu, Y., Lü, Z., & Dong, H. (2021) · npj Computational Materials · doi:10.1038/s41524-020-00488-z · Cited by 101
The amorphous state as a frontier in computational materials design
Liu, Y., Madanchi, A., Anker, A. S., Simine, L., & Deringer, V. L. (2024) · Nature Reviews Materials · doi:10.1038/s41578-024-00754-2 · Cited by 120
“A recent study classified experiments as successful or ‘failed’, and the formation of an amorphous phase was considered to be one of those failure categories 164 .”
Guo, Z., & Lin, B. (2021) · Solar Energy · doi:10.1016/j.solener.2021.09.030 · Cited by 95
Machine learning prediction of elastic properties and glass-forming ability of bulk metallic glasses
Xiong, J., Zhang, T., & Shi, S. (2019) · MRS Communications · doi:10.1557/mrc.2019.44 · Cited by 101
The Rise of Neural Networks for Materials and Chemical Dynamics
Kulichenko, M., Smith, J. S., Nebgen, B. T., Li, Y. W., Fedik, N. S., Boldyrev, A. I., Lubbers, N., Barros, K. M., & Tretiak, S. (2021) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.1c01357 · Cited by 108
Two-dimensional organic–inorganic superlattice-like heterostructures for energy storage applications
Xiong, P., Wu, Y., Liu, Y., Ma, R., Sasaki, T., Wang, X., & Zhu, J. (2020) · Energy & Environmental Science · doi:10.1039/d0ee03206a · Cited by 94
Automated pipeline for superalloy data by text mining
Wang, W., Jiang, X. F., Tian, S., Liu, P., Dang, D., Su, Y., Lookman, T., & Xie, J. (2022) · npj Computational Materials · doi:10.1038/s41524-021-00687-2 · Cited by 105
Emerging role of machine learning in light-matter interaction
Zhou, J., Huang, B., Yan, Z., & Bünzli, J. G. (2019) · Light Science & Applications · doi:10.1038/s41377-019-0192-4 · Cited by 93
Machine Learning Protocol for Surface-Enhanced Raman Spectroscopy
Hu, W., Ye, S., Zhang, Y., Li, T., Zhang, G., Luo, Y., Mukamel, S., & Jiang, J. (2019) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.9b02517 · Cited by 92
Davlatshoevich, N. D., & Hojamberdiev, M. (2025) · Computational Condensed Matter · doi:10.1016/j.cocom.2025.e01139 · Cited by 101
Wang, Z., Kononova, O., Cruse, K., He, T., Huo, H., Fei, Y., Zeng, Y., Sun, Y., Cai, Z., Sun, W., et al. (2022) · Scientific Data · doi:10.1038/s41597-022-01317-2 · Cited by 83
“This introduces significant anthropogenic bias toward “positive” data with little “negative” content in the dataset, thus limiting the tasks for future machine-learning applications 69,70 .”
BackgroundMa, C., Zhang, Z., Luce, B., Pusateri, S., Xie, B., Rafiei, M. H., & Hu, N. (2020) · npj Computational Materials · doi:10.1038/s41524-020-0309-6 · Cited by 97
Yang, R., McCandler, C. A., Andriuc, O., Siron, M., Woods‐Robinson, R., Horton, M. K., & Persson, K. A. (2022) · ACS Nano · doi:10.1021/acsnano.2c08411 · Cited by 95
Zheng, T., Hu, X., He, F., Wu, Q., Han, B., Chen, D., Li, J., Wang, Z., Wang, J., Kai, J., et al. (2020) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2020.07.009 · Cited by 92
Jia, H., Qiao, G., & Han, P. (2022) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2022.104725 · Cited by 95
System of sequences in multivariate reticular structures
Canossa, S., Ji, Z., Gropp, C., Rong, Z., Ploetz, E., Wuttke, S., & Yaghi, O. M. (2022) · Nature Reviews Materials · doi:10.1038/s41578-022-00482-5 · Cited by 92
Robust data-driven approach for predicting the configurational energy of high entropy alloys
Zhang, J., Liu, X., Bi, S., Yin, J., Zhang, G., & Eisenbach, M. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.108247 · Cited by 94
“Some examples of successful applications include discovering complex materials behavior[35, 36], accurate prediction of phase transitions and prediction[37, 38, 39], accelerated material design and prediction of material properties[40, 41, 42], modeling of various physical quantities, for instance,…”
BackgroundDirect Prediction of Phonon Density of States With Euclidean Neural Networks
Chen, Z., Andrejevic, N., Smidt, T., Ding, Z., Xu, Q., Chi, Y., Nguyen, Q. T., Alatas, A., Kong, J., & Li, M. (2021) · Advanced Science · doi:10.1002/advs.202004214 · Cited by 111
“[3] P.”
Adaptive Optimization of Chemical Reactions with Minimal Experimental Information
Reker, D., Hoyt, E. A., Bernardes, G. J. L., & Rodrigues, T. (2020) · Cell Reports Physical Science · doi:10.1016/j.xcrp.2020.100247 · Cited by 82
“24 For example, reaction feasibility can be predicted by clas-sifiers, 25 and substrate scoping (i.e., determining which building blocks react under certain fixed conditions) is predictable by leveraging brute-force reaction screening data.”
BackgroundMachine Learning Roadmap for Perovskite Photovoltaics
Srivastava, M., Howard, J. M., Gong, T., Rebello Sousa Dias, M., & Leite, M. S. (2021) · The Journal of Physical Chemistry Letters · doi:10.1021/acs.jpclett.1c01961 · Cited by 85
Converting Nanotoxicity Data to Information Using Artificial Intelligence and Simulation
Yan, X., Yue, T., Winkler, D. A., Yin, Y., Zhu, H., Jiang, G., & Yan, B. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00070 · Cited by 100
Schleinitz, J., Langevin, M., Smail, Y., Wehnert, B., Grimaud, L., & Vuilleumier, R. (2022) · Journal of the American Chemical Society · doi:10.1021/jacs.2c05302 · Cited by 88
Duan, C., Janet, J. P., Liu, F., Nandy, A., & Kulik, H. J. (2019) · Journal of Chemical Theory and Computation · doi:10.1021/acs.jctc.9b00057 · Cited by 87
He, J., Yu, C., Hou, Y., Su, X., Li, J., Liu, C., Xue, D., Cao, J., Su, Y., Qiao, L. J., et al. (2022) · Nano Energy · doi:10.1016/j.nanoen.2022.107218 · Cited by 87
Similarity of Precursors in Solid-State Synthesis as Text-Mined from Scientific Literature
He, T., Sun, W., Huo, H., Kononova, O., Rong, Z., Tshitoyan, V., Botari, T., & Ceder, G. (2020) · Chemistry of Materials · doi:10.1021/acs.chemmater.0c02553 · Cited by 85
Yang, F., Li, Z., Wang, Q., Jiang, B., Yan, B., Zhang, P., Xu, W., Dong, C., & Liaw, P. K. (2020) · npj Computational Materials · doi:10.1038/s41524-020-00372-w · Cited by 96
Machine-Learning-Aided Self-Powered Assistive Physical Therapy Devices
Xiao, X., Fang, Y., Xiao, X., Xu, J. H., & Chen, J. (2021) · ACS Nano · doi:10.1021/acsnano.1c10676 · Cited by 92
Mamatha, G. M., Dixit, P., Krishna, R. H., & Kumar, S. G. (2024) · Hybrid Advances · doi:10.1016/j.hybadv.2024.100200 · Cited by 99
Machine learning in energy storage material discovery and performance prediction
Huang, G., Huang, F., & Dong, W. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.152294 · Cited by 98
Mosupi, K., Masukume, M., Weng, G., Musyoka, N. M., & Langmi, H. W. (2025) · Coordination Chemistry Reviews · doi:10.1016/j.ccr.2025.216467 · Cited by 89
Machine Learning for Perovskites' Reap-Rest-Recovery Cycle
Howard, J. M., Tennyson, E. M., Neves, B. R. A., & Leite, M. S. (2019) · Joule · doi:10.1016/j.joule.2018.11.010 · Cited by 85
Dananjaya, V., Hansika, N., Marimuthu, S., Chevali, V. S., Mishra, Y. K., Grace, A. N., Salim, N. V., & Abeykoon, C. (2025) · Progress in Materials Science · doi:10.1016/j.pmatsci.2025.101433 · Cited by 90
Chemputation and the Standardization of Chemical Informatics
Hammer, A. J. S., Leonov, A. I., Bell, N. L., & Cronin, L. (2021) · JACS Au · doi:10.1021/jacsau.1c00303 · Cited by 88
Mobile energy storage technologies for boosting carbon neutrality
Zhang, C., Yang, Y., Liu, X., Mao, M., Li, K., Li, Q., Zhang, G., & Wang, C. (2023) · The Innovation · doi:10.1016/j.xinn.2023.100518 · Cited by 116
“…to build ma-terial-performance prediction models and then to assess key properties of new materials has shown its merit in various applications 296,297 and is expected to accelerate the process of material innovation, shorten the discovery-develop-ment-production-application cycle, and reduce the…”
BackgroundBatool, M., Sanumi, O. J., & Janković, J. (2024) · Energy and AI · doi:10.1016/j.egyai.2024.100424 · Cited by 88
Zhuang, X., Antonov, S., Li, W., Lu, S., Li, L., & Feng, Q. C. (2022) · Acta Materialia · doi:10.1016/j.actamat.2022.118525 · Cited by 83
Teichert, G. H., & Garikipati, K. (2018) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2018.10.025 · Cited by 83
“These have included the search for compounds predicted by theory [1], screening for new materials [2], identifying stable compounds [3], accelerated prediction of material properties [4], the combination of data mining and quantum mechanics to predict crystal structures [5], and many others.”
BackgroundWang, Y., Xie, T., Tang, Q., Wang, M., Ying, T., Zhu, H., & Zeng, X. (2022) · Journal of Magnesium and Alloys · doi:10.1016/j.jma.2021.12.007 · Cited by 83
“built ML model with chemical information contained in historical reactions and accurately predicted if the reaction can proceed [37].”
BackgroundMachine learning to optimize nanocomposite materials for electromagnetic interference shielding
Shi, M., Feng, C., Li, J., & Guo, S. (2022) · Composites Science and Technology · doi:10.1016/j.compscitech.2022.109414 · Cited by 82
Closed-loop optimization of nanoparticle synthesis enabled by robotics and machine learning
Park, J., Kim, Y. M., Hong, S., Han, B., Nam, K. T., & Jung, Y. (2023) · Matter · doi:10.1016/j.matt.2023.01.018 · Cited by 82
Error-Controlled Exploration of Chemical Reaction Networks with Gaussian Processes
Simm, G. N., & Reiher, M. (2018) · Journal of Chemical Theory and Computation · doi:10.1021/acs.jctc.8b00504 · Cited by 81
Deep Learning Accelerated Gold Nanocluster Synthesis
Li, J., Chen, T., Lim, K., Chen, L., Khan, S. A., Xie, J., & Wang, X. (2019) · Advanced Intelligent Systems · doi:10.1002/aisy.201900029 · Cited by 88
Qin, J., Liu, Z., Ma, M., & Li, Y. (2021) · Journal of Materiomics · doi:10.1016/j.jmat.2021.02.012 · Cited by 88
Dörr, M., Hielscher, M. M., Proppe, J., & Waldvogel, S. R. (2021) · ChemElectroChem · doi:10.1002/celc.202100318 · Cited by 85
Into the Unknown: How Computation Can Help Explore Uncharted Material Space
Mroz, A. M., Posligua, V., Tarzia, A., Wolpert, E. H., & Jelfs, K. E. (2022) · Journal of the American Chemical Society · doi:10.1021/jacs.2c06833 · Cited by 92
Enabling Intelligent Metasurfaces for Semi-known Input
Lin, P., Qian, C., Zhang, J., Chen, J., Zhu, X., Wang, Z., Huangfu, J., & Chen, H. (2023) · Electromagnetic waves · doi:10.2528/pier23090201 · Cited by 80
“Across various physical scenes, great efforts have been made in improving the design accuracy and reducing data dependency by using novel network structures [23–27].”
BackgroundComputational and Machine Learning Methods for CO 2 Capture Using Metal–Organic Frameworks
Mashhadimoslem, H., Abdol, M. A., Karimi, P., Zanganeh, K. E., Shafeen, A., Elkamel, A., & Kamkar, M. (2024) · ACS Nano · doi:10.1021/acsnano.3c13001 · Cited by 87
Lanthanide ion-doped upconversion nanoparticles for low-energy super-resolution applications
Lamon, S., Yu, H., Zhang, Q., & Gu, M. (2024) · Light Science & Applications · doi:10.1038/s41377-024-01547-6 · Cited by 90
“Lantha-nide ion-doped UCNPs with tailored properties may advance with the use of new smart tools and methods such as ML algorithms 270 – 272 , resulting in the development of more effective and ef fi cient lanthanide ion-doped UCNPs for use in low-energy super-resolution applications in the life…”
MethodZhai, X., Chen, M., & Lu, W. (2018) · Computational Materials Science · doi:10.1016/j.commatsci.2018.04.031 · Cited by 79
Bai, L., Zhang, Y., Zhang, Y., Zhang, Y., Li, X., Si, H., Li, X. F., Si, H., Zhang, Y., & Huang, H. (2018) · Nano Energy · doi:10.1016/j.nanoen.2018.09.028 · Cited by 79
“diction, some new materials, especially superconductors [3], lithium batteries [4], semiconductors [5] and so forth, have been predicted in virtue of computers or machine-learning tools [6].”
BackgroundWu, D., Zhang, D., Liu, S., Jin, Z., Chowwanonthapunya, T., Gao, J. T., & Li, X. (2020) · Chemical Engineering Journal · doi:10.1016/j.cej.2020.125878 · Cited by 79
Omar, Ö. H., del Cueto, M., Nematiaram, T., & Troisi, A. (2021) · Journal of Materials Chemistry C · doi:10.1039/d1tc03256a · Cited by 87
Mining Insights on Metal–Organic Framework Synthesis from Scientific Literature Texts
Park, H., Kang, Y., Choe, W., & Kim, J. (2022) · Journal of Chemical Information and Modeling · doi:10.1021/acs.jcim.1c01297 · Cited by 89
Methods, progresses, and opportunities of materials informatics
Li, C., & Zheng, K. (2023) · InfoMat · doi:10.1002/inf2.12425 · Cited by 83
Digital twins in process engineering: An overview on computational and numerical methods
Peterson, L., Gosea, I. V., Benner, P., & Sundmacher, K. (2024) · Computers & Chemical Engineering · doi:10.1016/j.compchemeng.2024.108917 · Cited by 86
Designing Algorithms To Aid Discovery by Chemical Robots
Henson, A. B., Gromski, P. S., & Cronin, L. (2018) · ACS Central Science · doi:10.1021/acscentsci.8b00176 · Cited by 78
“A recent example of this approach is to use a large database of experimental results along with digital features of the chemicals involved to predict possible reactions; 94 this work is also noteworthy for using data about negative results as well as positive results.”
MethodPendleton, I. M., Cattabriga, G., Li, Z., Najeeb, M. A., Friedler, S. A., Norquist, A. J., Chan, E. M., & Schrier, J. (2019) · MRS Communications · doi:10.1557/mrc.2019.72 · Cited by 73
Self-citationMLMD: a programming-free AI platform to predict and design materials
Ma, J., Cao, B., Dong, S., Tian, Y., Wang, M., Xiong, J., & Sun, S. (2024) · npj Computational Materials · doi:10.1038/s41524-024-01243-4 · Cited by 84
“Raccuglia et al. utilized successful and unsuccessful historical reactions to train their ML model, discovering critical factors that affect chemical reactions and synthesizing new organic compounds based on this trained model 24 .”
The mastery of details in the workflow of materials machine learning
Ma, Y., Xu, P., Li, M., Ji, X., Zhao, W., & Lu, W. (2024) · npj Computational Materials · doi:10.1038/s41524-024-01331-5 · Cited by 89
“ML, developed upon data, has the capacity to extract valuable insights from existing data, including even unsuccessful experimental samples 3 .”
A curious formulation robot enables the discovery of a novel protocell behavior
Grizou, J., Points, L. J., Sharma, A., & Cronin, L. (2020) · Science Advances · doi:10.1126/sciadv.aay4237 · Cited by 77
Saeki, A., & Kranthiraja, K. (2019) · Japanese Journal of Applied Physics · doi:10.7567/1347-4065/ab4f39 · Cited by 81
Harada, M., Takeda, H., Suzuki, S., Nakano, K., Tanibata, N., Nakayama, M., Karasuyama, M., & Takeuchi, I. (2020) · Journal of Materials Chemistry A · doi:10.1039/d0ta04441e · Cited by 77
Digital Transformation in Materials Science: A Paradigm Change in Material's Development
Kimmig, J., Zechel, S., & Schubert, U. S. (2021) · Advanced Materials · doi:10.1002/adma.202004940 · Cited by 81
The value of negative results in data-driven catalysis research
Taniike, T., & TAKAHASHI, K. G. (2023) · Nature Catalysis · doi:10.1038/s41929-023-00920-9 · Cited by 77
Simulation and design of energy materials accelerated by machine learning
Wang, H., Ji, Y., & Li, Y. (2020) · WIREs Computational Molecular Science · doi:10.1002/wcms.1421 · Cited by 74
“Even with failed experimental data, ML can extract valuable information from it.(8) Herein, the main goal of this review is to discuss the successful applications of ML in structure discovery, performance prediction and stability assessment, establishment of structure–property relationship for energy materials.”
MethodLiu, P., Wen, Y., Huang, L., Zhu, X., Wu, R., Ai, S., Xue, T., & Ge, Y. (2021) · Journal of Electroanalytical Chemistry · doi:10.1016/j.jelechem.2021.115684 · Cited by 80
Applied Machine Learning for Developing Next‐Generation Functional Materials
Dinic, F., Singh, K., Dong, T., Rezazadeh, M., Wang, Z., Khosrozadeh, A., Yuan, T., & Voznyy, O. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202104195 · Cited by 82
Versatile Redox-Active Organic Materials for Rechargeable Energy Storage
Kwon, G., Ko, Y., Kim, Y., Kim, K., & Kang, K. (2021) · Accounts of Chemical Research · doi:10.1021/acs.accounts.1c00590 · Cited by 76
Wang, Z., Gu, Y., Zheng, L., Hou, J., Zheng, H., Sun, S., & Wang, L. (2021) · Advanced Materials · doi:10.1002/adma.202106776 · Cited by 80
Rapid discovery of stable materials by coordinate-free coarse graining
Goodall, R. E. A., Parackal, A. S., Faber, F. A., Armiento, R., & Lee, A. A. (2022) · Science Advances · doi:10.1126/sciadv.abn4117 · Cited by 90
Wang, H., Kang, X., & Han, B. (2025) · Chemical Society Reviews · doi:10.1039/d5cs00780a · Cited by 81
Ding, F., Ge, Q., Jiang, D., Fu, J., & Hao, M. (2017) · PLoS ONE · doi:10.1371/journal.pone.0179057 · Cited by 83
Wu, X., Xiang, S., Su, J., & Cai, W. (2019) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.8b11793 · Cited by 77
Feature engineering of material structure for AI-based materials knowledge systems
Kalidindi, S. R. (2020) · Journal of Applied Physics · doi:10.1063/5.0011258 · Cited by 78
Self-Driving Laboratories for Development of New Functional Materials and Optimizing Known Reactions
Soldatov, M. A., Butova, V. V., Pashkov, D. M., Butakova, M. A., Medvedev, P. V., Chernov, A. V., & Soldatov, A. V. (2021) · Nanomaterials · doi:10.3390/nano11030619 · Cited by 80
“Another interesting example was a materials design using machine learning on the data from failed experiments [62].”
MethodHu, J., Stefanov, S., Song, Y., Omee, S. S., Louis, S.-Y., Siriwardane, E. M. D., Zhao, Y., & Wei, L. (2022) · npj Computational Materials · doi:10.1038/s41524-022-00750-6 · Cited by 84
“Machine learning (ML) models and algorithms are increasingly applied in materials science for a wide variety of tasks ranging from materials characterization, property prediction, and to structure/composition generation design as reviewed in 1 – 11 .”
Dahl, J. C., Wang, X., Huang, X., Chan, E. M., & Alivisatos, A. P. (2020) · Journal of the American Chemical Society · doi:10.1021/jacs.0c04997 · Cited by 75
High-throughput experiments facilitate materials innovation: A review
Liu, Y., Hu, Z., Suo, Z., Hu, L., Feng, L., Gong, X., Liu, Y., & Zhang, J. (2019) · Science China Technological Sciences · doi:10.1007/s11431-018-9369-9 · Cited by 74
Liu, Y., Wu, J., Yang, G., Zhao, T., & Shi, S. (2019) · Science Bulletin · doi:10.1016/j.scib.2019.06.026 · Cited by 71
“Support vector machine (SVM), which was proposed by Cortes and Vapnik [56] in 1995, is a statistical learning approach based on the structural risk minimization principle and has been widely applied in materials machine learning [57].”
BackgroundMachine Learning Driven Synthesis of Few-Layered WTe2 with Geometrical Control
Xu, M., Tang, B., Lu, Y., Zhu, C., Lu, Q., Zhu, C., Zheng, L., Zhang, J., Han, N., Fang, W., et al. (2021) · Journal of the American Chemical Society · doi:10.1021/jacs.1c06786 · Cited by 76
Thermal management materials for energy-efficient and sustainable future buildings
Qin, Z., Li, M., Flohn, J., & Hu, Y. (2021) · Chemical Communications · doi:10.1039/d1cc05486d · Cited by 73
Recent progress in the machine learning-assisted rational design of alloys
Fu, H., Zhang, H., Wang, C., Yong, W., & Xie, J. (2022) · International Journal of Minerals Metallurgy and Materials · doi:10.1007/s12613-022-2458-8 · Cited by 75
“tion to smoothly facilitate machine learning modeling [18].”
BackgroundJha, S., Yen, M., Salinas, Y. S., Palmer, E., Villafuerte, J. A., & Liang, H. Y. (2023) · Journal of Materials Chemistry A · doi:10.1039/d2ta07148g · Cited by 74
Exploring Optimal Water Splitting Bifunctional Alloy Catalyst by Pareto Active Learning
Kim, M., Kim, Y., Ha, M. Y., Shin, E., Kwak, S. J., Park, M., Kim, I., Jung, W., Lee, W. B., Kim, Y., et al. (2023) · Advanced Materials · doi:10.1002/adma.202211497 · Cited by 73
Hoffmann, J., Bar‐Sinai, Y., Lee, L. M., Andrejevic, J., Mishra, D., Rubinstein, S. M., & Rycroft, C. H. (2019) · Science Advances · doi:10.1126/sciadv.aau6792 · Cited by 72
“This serendipitous aspect of discovery has been of immense importance to the sciences and is difficult to include in automated data exploration methods, which is an area of ongoing research [35–37].”
Metadata
- Authors
- Raccuglia, P., Elbert, K. C., Adler, P. D. F., Falk, C., Wenny, M. B., Mollo, A., Zeller, M., Friedler, S. A., Schrier, J., & Norquist, A. J.
- Affiliations
- Haverford College (US)
- Corresponding author
- Friedler, Sorelle A.
- Schrier, Joshua
- Norquist, Alexander J.
- ORCID
- Venue
- Nature
- Published
- 2016-05-04
- Volume
- 533
- Issue
- 7601
- Pages
- 73-76
- ISSN
- 0028-0836 (ISSN-L)
- 1476-4687
- OpenAlex
- W2347129741
- Cited by
- 1,727
- References
- 37
- Citations by year
- 2026: 215 · 2025: 225 · 2024: 214 · 2023: 169 · 2022: 201 · 2021: 206 · 2020: 190 · 2019: 148 · 2018: 95 · 2017: 51 · 2016: 13
- FWCI
- 45.53
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.springer.com/tdm (tdm)
- www.springer.com/tdm (vor)
- Locations
- Nature (publishedVersion)
- PubMed (publishedVersion)
- RePEc: Research Papers in Economics (submittedVersion)
- Topics
- Physical Sciences › Materials Science › Materials Chemistry › Machine Learning in Materials Science
- Life Sciences › Pharmacology, Toxicology and Pharmaceutics › Drug Discovery › Computational Drug Discovery Methods
- Social Sciences › Arts and Humanities › History and Philosophy of Science › History and advancements in chemistry
- Keywords
- dark reaction, chemical reaction prediction, machine learning, hydrothermal synthesis, laboratory notebooks, cheminformatics, organic-inorganic hybrid materials, materials discovery, crystal structure prediction, synthetic route design, Materials Genome Initiative
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.