Machine-learning-assisted materials discovery using failed experiments
The DOI matches its Crossref record; 38 of the 38 references it cites were found in a registry or an index.
Abstract
Inorganic-organic hybrid materials such as organically templated metal oxides, metal-organic frameworks (MOFs) and organohalide perovskites have been studied for decades, and hydrothermal and (non-aqueous) solvothermal syntheses have produced thousands of new materials that collectively contain nearly all the metals in the periodic table. Nevertheless, the formation of these compounds is not fully understood, and development of new compounds relies primarily on exploratory syntheses. Simulation- and data-driven approaches (promoted by efforts such as the Materials Genome Initiative) provide an alternative to experimental trial-and-error. Three major strategies are: simulation-based predictions of physical properties (for example, charge mobility, photovoltaic properties, gas adsorption capacity or lithium-ion intercalation) to identify promising target candidates for synthetic efforts; determination of the structure-property relationship from large bodies of experimental data, enabled by integration with high-throughput synthesis and measurement tools; and clustering on the basis of similar crystallographic structure (for example, zeolite structure classification or gas adsorption properties). Here we demonstrate an alternative approach that uses machine-learning algorithms trained on reaction data to predict reaction outcomes for the crystallization of templated vanadium selenites. We used information on 'dark' reactions--failed or unsuccessful hydrothermal syntheses--collected from archived laboratory notebooks from our laboratory, and added physicochemical property descriptions to the raw notebook information using cheminformatics techniques. We used the resulting data to train a machine-learning model to predict reaction success. When carrying out hydrothermal synthesis experiments using previously untested, commercially available organic building blocks, our machine-learning model outperformed traditional human strategies, and successfully predicted conditions for new organically templated inorganic product formation with a success rate of 89 per cent. Inverting the machine-learning model reveals new hypotheses regarding the conditions for successful product formation.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“For example, in experimental data sets extracted from the literature (14,15,19), there can be positive bias for reporting only successful experiments (16, 107, 108), leading to challenges in classification tasks (17).”
From Machine Learning for the Discovery, Design, and Engineering of Materials. (2022) · cites this paper as [108]
In the citing paper
“ML has had recent success in predicting specific chemical, material, and optical properties without the need for expensive experimentation or brute-force simulation [105,299,490,653], including in aerosols [465,500].”
From Tackling climate change with machine learning (2023) · cites this paper as [653]
Citations
Cites
Cortes, C., & Vapnik, V. (1995) · Machine Learning · doi:10.1007/bf00994018 · Cited by 59,421
Cortes, C., & Vapnik, V. (1995) · Machine-mediated learning · doi:10.1023/a:1022627411411 · Cited by 48,445
LIBSVM: A library for support vector machines
Chang, C.-C., & Lin, C.-J. (2011) · ACM Transactions on Intelligent Systems and Technology · doi:10.1145/1961189.1961199 · Cited by 40,918 · cited 1×
“The SVM was implemented in WEKA 3.7 32,33 ; this implementation included a built-in data-normalization step.”
MethodInfluentialThe Elements of Statistical Learning
Hastie, T., Friedman, J., & Tibshirani, R. (2001) · Springer Series in Statistics · doi:10.1007/978-0-387-21606-5 · Cited by 24,162
The WEKA data mining software: an update
Hall, M., Frank, E., Holmes, G., Pfahringer, B., Reutemann, P., & Witten, I. H. (2009) · ACM SIGKDD Explorations Newsletter · doi:10.1145/1656274.1656278 · Cited by 17,750 · cited 2×
“All data were relabelled with the predicted outcomes of the SVM model and a C4.5 decision tree (implemented in WEKA 3.7) 32 was used to model those predicted outcomes 39 .”
MethodInfluentialThe Cambridge Structural Database: a quarter of a million crystal structures and rising
Allen, F. H. (2002) · Acta Crystallographica Section B Structural Science · doi:10.1107/s0108768102003890 · Cited by 9,898 · cited 2×
“Organically templated metal oxides using these diamines are essentially unknown, as indicated by their near absence from the Cambridge Structural Database 26 (see Methods).”
BackgroundText categorization with Support Vector Machines: Learning with many relevant features
Joachims, T. (1998) · Lecture Notes in Computer Science · doi:10.1007/bfb0026683 · Cited by 7,999
Introduction to Metal–Organic Frameworks
Zhou, H.-C., Long, J. R., & Yaghi, O. M. (2012) · Chemical Reviews · doi:10.1021/cr300014x · Cited by 7,720 · cited 1×
“Inorganic–organic hybrid materials 1–3 such as organically templated metal oxides 1 , metal–organic frameworks (MOFs) 2 and organohalide perovskites 4 have been studied for decades, and hydrothermal and (non-aqueous) solvothermal syntheses have produced thousands of new materials that collectively…”
BackgroundMetal-halide perovskites for photovoltaic and light-emitting devices
Stranks, S. D., & Snaith, H. J. (2015) · Nature Nanotechnology · doi:10.1038/nnano.2015.90 · Cited by 3,392 · cited 1×
“Inorganic–organic hybrid materials 1–3 such as organically templated metal oxides 1 , metal–organic frameworks (MOFs) 2 and organohalide perovskites 4 have been studied for decades, and hydrothermal and (non-aqueous) solvothermal syntheses have produced thousands of new materials that collectively…”
BackgroundOpen-Framework Inorganic Materials
Cheetham, A. K., Férey, G., & Loiseau, T. (1999) · Angewandte Chemie International Edition · doi:10.1002/(sici)1521-3773(19991115)38:22<3268::aid-anie3268>3.0.co;2-u · Cited by 2,426 · cited 1×
“…templated metal oxides 1 , metal–organic frameworks (MOFs) 2 and organohalide perovskites 4 have been studied for decades, and hydrothermal and (non-aqueous) solvothermal syntheses have produced thousands of new materials that collectively contain nearly all the metals in the periodic table 5–9 .”
Background
Cited by
Machine learning for molecular and materials science
Butler, K. T., Davies, D. W., Cartwright, H., Isayev, O., & Walsh, A. (2018) · Nature · doi:10.1038/s41586-018-0337-2 · Cited by 4,968
“Another study trained a model to predict the reaction conditions for new organically templated inorganic product formation with a success rate of 89%.(45)”
BackgroundData-driven prediction of battery cycle life before capacity degradation
Severson, K. A., Attia, P. M., Jin, N., Perkins, N., Jiang, B., Yang, Z., Chen, M. H., Aykol, M., Herring, P. K., Fraggedakis, D., et al. (2019) · Nature Energy · doi:10.1038/s41560-019-0356-8 · Cited by 3,228
Automatic Chemical Design Using a Data-Driven Continuous Representation of Molecules
Gómez-Bombarelli, R., Wei, J. N., Duvenaud, D., Hernández-Lobato, J. M., Sánchez-Lengeling, B., Sheberla, D., Aguilera-Iparraguirre, J., Hirzel, T. D., Adams, R. P., & Aspuru-Guzik, A. (2018) · ACS Central Science · doi:10.1021/acscentsci.7b00572 · Cited by 3,106
“Figures 13-15 ) Bayesian optimization of logP Having shown the ability of a VAE to generate a continuous, reversible encoding of molecular structures, we proceeded to test its potential to discover new molecules with desired properties.”
BackgroundRecent advances and applications of machine learning in solid-state materials science
Schmidt, J., Marques, M. R. G., Botti, S., & Marques, M. A. L. (2019) · npj Computational Materials · doi:10.1038/s41524-019-0221-0 · Cited by 2,607
Inverse molecular design using machine learning: Generative models for matter engineering
Sanchez-Lengeling, B., & Aspuru-Guzik, A. (2018) · Science · doi:10.1126/science.aat2663 · Cited by 2,050
Automatic Chemical Design Using a Data-Driven Continuous Representation of Molecules.
Gómez‐Bombarelli, R., Wei, J. N., Duvenaud, D., Hernández-Lobato, J. M., Sánchez-Lengeling, B., Sheberla, D., Aguilera‐Iparraguirre, J., Hirzel, T. D., Adams, R. P., & Aspuru‐Guzik, A. (2018) · Cambridge University Engineering Department Publications Database · doi:10.17863/cam.34134 · Cited by 1,703
Integrating Scientific Knowledge with Machine Learning for Engineering and Environmental Systems
Willard, J., Jia, X., Xu, S., Steinbach, M., & Kumar, V. (2023) · ACM Computing Surveys · doi:10.1145/3514228 · Cited by 878
“There is also increasing interest in the inverse design of materials using ML, where desired target properties of materials are used as input to the model to identify atomic or microscale structures that exhibit such properties [156, 172, 222, 243].”
BackgroundMaterials discovery and design using machine learning
Liu, Y., Zhao, T., Ju, W., & Shi, S. (2017) · Journal of Materiomics · doi:10.1016/j.jmat.2017.08.002 · Cited by 1,276
Stassen, I., Burtch, N., Talin, A., Falcaro, P., Allendorf, M., & Ameloot, R. (2017) · Chemical Society Reviews · doi:10.1039/c7cs00122c · Cited by 1,210
Machine learning in materials science
Wei, J., Chu, X., Sun, X., Xu, K., Deng, H., Chen, J., Wei, Z., & Lei, M. (2019) · InfoMat · doi:10.1002/inf2.12028 · Cited by 1,069
Predicting reaction performance in C–N cross-coupling using machine learning
Ahneman, D. T., Estrada, J. G., Lin, S., Dreher, S. D., & Doyle, A. G. (2018) · Science · doi:10.1126/science.aar5169 · Cited by 1,058
Self-referencing embedded strings (SELFIES): A 100% robust molecular string representation
Krenn, M., Häse, F., Nigam, A., Friederich, P., & Aspuru-Guzik, A. (2020) · Machine Learning: Science and Technology · doi:10.1088/2632-2153/aba947 · Cited by 660
“There, scientists are currently adapting those novel methods for efficiently proposing new molecules with superior properties [5–10].”
MethodLiu, X., Liu, J., Lin, S., & Zhao, X. (2020) · Materials Today · doi:10.1016/j.mattod.2019.12.026 · Cited by 1,023
Machine Learning: New Ideas and Tools in Environmental Science and Engineering
Zhong, S., Zhang, K., Bagheri, M., Burken, J. G., Gu, A., Li, B., Ma, X., Marrone, B. L., Ren, Z. J., Schrier, J., et al. (2021) · Environmental Science & Technology · doi:10.1021/acs.est.1c01339 · Cited by 945
Self-citationMachine learning assisted design of high entropy alloys with desired property
Wen, C., Zhang, Y., Wang, C., Xue, D., Bai, Y., Antonov, S., Dai, L., Lookman, T., & Su, Y. (2019) · Acta Materialia · doi:10.1016/j.actamat.2019.03.010 · Cited by 936
Li, M., Wang, C., Chen, Z., Xu, K., & Lu, J. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00531 · Cited by 944
Mechanical properties and deformation mechanisms of gradient nanostructured metals and alloys
Li, X., Lu, L., Li, J., Zhang, X., & Gao, H. (2020) · Nature Reviews Materials · doi:10.1038/s41578-020-0212-2 · Cited by 846
Combining Machine Learning and Computational Chemistry for Predictive Insights Into Chemical Systems
Keith, J. A., Vassilev-Galindo, V., Cheng, B., Chmiela, S., Gastegger, M., Müller, K.-R., & Tkatchenko, A. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00107 · Cited by 849
A strategy to apply machine learning to small datasets in materials science
Zhang, Y., & Ling, C. (2018) · npj Computational Materials · doi:10.1038/s41524-018-0081-z · Cited by 776
Less is more: Sampling chemical space with active learning
Smith, J. S., Nebgen, B., Lubbers, N., Isayev, O., & Roitberg, A. E. (2018) · The Journal of Chemical Physics · doi:10.1063/1.5023802 · Cited by 811
Accelerating the discovery of materials for clean energy in the era of smart automation
Tabor, D. P., Roch, L. M., Saikin, S. K., Kreisbeck, C., Sheberla, D., Montoya, J. H., Dwaraknath, S., Aykol, M., Ortiz, C., Tribukait, H., et al. (2018) · Nature Reviews Materials · doi:10.1038/s41578-018-0005-z · Cited by 776
Deep learning for computational chemistry
Goh, G. B., Hodas, N. O., & Vishnu, A. (2017) · Journal of Computational Chemistry · doi:10.1002/jcc.24764 · Cited by 809
Controlling an organic synthesis robot with machine learning to search for new reactivity
Granda, J. M., Donina, L., Dragone, V., Long, D.-L., & Cronin, L. (2018) · Nature · doi:10.1038/s41586-018-0307-8 · Cited by 740
Feng, Q.-K., Zhong, S.-L., Pei, J.-Y., Zhao, Y., Zhang, D.-L., Liu, D.-F., Zhang, Y.-X., & Dang, Z.-M. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00793 · Cited by 744
Yang, L., Qian, S., Wang, X., Cui, X., Chen, B., & Xing, H. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00756c · Cited by 746
Artificial intelligence and machine learning in design of mechanical materials
Guo, K., Yang, Z., Yu, C.-H., & Buehler, M. J. (2021) · Materials Horizons · doi:10.1039/d0mh01451f · Cited by 735
Self-Driving Laboratories for Chemistry and Materials Science
Tom, G., Schmid, S. P., Baird, S. G., Cao, Y., Darvish, K., Hao, H., Lo, S., Pablo-García, S., Rajaonson, E. M., Skreta, M., et al. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.4c00055 · Cited by 707
Machine Learning in Computer-Aided Synthesis Planning
Coley, C. W., Green, W. H., & Jensen, K. F. (2018) · Accounts of Chemical Research · doi:10.1021/acs.accounts.8b00087 · Cited by 704
Smith, J. S., Nebgen, B. T., Zubatyuk, R., Lubbers, N., Devereux, C., Barros, K., Tretiak, S., Isayev, O., & Roitberg, A. E. (2019) · Nature Communications · doi:10.1038/s41467-019-10827-4 · Cited by 664
Prediction of higher-selectivity catalysts by computer-driven workflow and machine learning
Zahrt, A. F., Henle, J. J., Rose, B. T., Wang, Y., Darrow, W. T., & Denmark, S. E. (2019) · Science · doi:10.1126/science.aau5631 · Cited by 683
“Computer-assisted synthetic planning (5, 6), the prediction of organic reaction outcomes (7, 8), assisted medicinal chemistry discovery (9, 10), catalyst design (11, 12), the use of continuous molecular representations for automatic generation of new chemical structures (13), materials discovery (14), the enhancement…”
Deep learning for molecular design—a review of the state of the art
Elton, D. C., Boukouvalas, Z., Fuge, M. D., & Chung, P. W. (2019) · Molecular Systems Design & Engineering · doi:10.1039/c9me00039a · Cited by 683
Self-referencing embedded strings (SELFIES): A 100% robust molecular string representation
Krenn, M., Häse, F., Nigam, A., Friederich, P., & Aspuru‐Guzik, A. (2020) · Repository KITopen (Karlsruhe Institute of Technology) · doi:10.5445/ir/1000128111 · Cited by 618
Machine Learning for Catalysis Informatics: Recent Applications and Prospects
Toyao, T., Maeno, Z., Takakusagi, S., Kamachi, T., Takigawa, I., & Shimizu, K.-I. (2020) · ACS Catalysis · doi:10.1021/acscatal.9b04186 · Cited by 617
Emerging applications of zeolites in catalysis, separation and host–guest assembly
Li, Y., & Yu, J. (2021) · Nature Reviews Materials · doi:10.1038/s41578-021-00347-3 · Cited by 585
Bessa, M. A., Bostanabad, R., Liu, Z., Hu, A., Apley, D. W., Brinson, C., Chen, W., & Liu, W. K. (2017) · Computer Methods in Applied Mechanics and Engineering · doi:10.1016/j.cma.2017.03.037 · Cited by 573
“On the one hand, material scientists have focused on accelerating materials design by probing large datasets obtained from first principle calculations [86–88] or even from failed experiments [89].”
BackgroundNew frontiers for the materials genome initiative
de Pablo, J. J., Jackson, N. E., Webb, M. A., Chen, L.-Q., Moore, J. E., Morgan, D., Jacobs, R., Pollock, T., Schlom, D. G., Toberer, E. S., et al. (2019) · npj Computational Materials · doi:10.1038/s41524-019-0173-4 · Cited by 562
“However, null results are critical to understanding material properties, 115 yet they are infrequently disseminated.”
Machine Learning for Electrocatalyst and Photocatalyst Design and Discovery
Mai, H., Le, T. C., Chen, D., Winkler, D. A., & Caruso, R. A. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.2c00061 · Cited by 552
Deep-learning-enabled self-adaptive microwave cloak without human intervention
Qian, C., Zheng, B., Shen, Y., Jing, L., Li, E., Shen, L., & Chen, H. (2020) · Nature Photonics · doi:10.1038/s41566-020-0604-2 · Cited by 585
Nanoparticle synthesis assisted by machine learning
Tao, H., Wu, T., Aldeghi, M., Wu, T. C., Aspuru-Guzik, A., & Kumacheva, E. (2021) · Nature Reviews Materials · doi:10.1038/s41578-021-00337-5 · Cited by 545
“Linear regression and tree based models are generally better interpretable than the other models discussed, and, thus, a more suitable choice if gaining scientific insight is the primary interest 45,46 .”
BackgroundExplainable machine learning in materials science
Zhong, X., Gallagher, B., Liu, S., Kailkhura, B., Hiszpanski, A., & Han, T. Y.-J. (2022) · npj Computational Materials · doi:10.1038/s41524-022-00884-7 · Cited by 501
“Some XAI techniques are also being applied in materials ML studies 20 – 22 but XAI as a comprehensive fi eld remains unfamiliar to the mainstream materials science community.”
MethodElemNet: Deep Learning the Chemistry of Materials From Only Elemental Composition
Jha, D., Ward, L., Paul, A., Liao, W.-K., Choudhary, A., Wolverton, C., & Agrawal, A. (2018) · Scientific Reports · doi:10.1038/s41598-018-35934-y · Cited by 510
Naser, M. Z., & Alavi, A. H. (2023) · Architecture, Structures and Construction · doi:10.1007/s44150-021-00015-8 · Cited by 464
Opportunities and Challenges for Machine Learning in Materials Science
Morgan, D., & Jacobs, R. (2020) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070218-010015 · Cited by 549
Best practices in machine learning for chemistry
Artrith, N., Butler, K. T., Coudert, F.-X., Han, S., Isayev, O., Jain, A., & Walsh, A. (2021) · Nature Chemistry · doi:10.1038/s41557-021-00716-z · Cited by 505
Machine learning for perovskite materials design and discovery
Tao, Q., Xu, P., Li, M., & Lu, W. (2021) · npj Computational Materials · doi:10.1038/s41524-021-00495-8 · Cited by 542
Ren, F., Ward, L., Williams, T., Laws, K. J., Wolverton, C., Hattrick-Simpers, J., & Mehta, A. (2018) · Science Advances · doi:10.1126/sciadv.aaq1566 · Cited by 524
“However, there is a problem in training an ML model solely on previous MG experiments; the MG literature tends to report successful materials, but examples of unsuccessful materials are particularly valuable in improving ML models ( 17 ).”
Artificial Intelligence Applied to Battery Research: Hype or Reality?
Lombardo, T., Duquesnoy, M., El-Bouysidy, H., Årén, F., Gallo-Bueno, A., Jørgensen, P. B., Bhowmik, A., Demortière, A., Ayerbe, E., Alcaide, F., et al. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00108 · Cited by 503
Metrology for the next generation of semiconductor devices
Orji, N. G., Badaroglu, M., Barnes, B. M., Beitia, C., Bunday, B. D., Celano, U., Kline, R. J., Neisser, M., Obeng, Y., & Vladar, A. E. (2018) · Nature Electronics · doi:10.1038/s41928-018-0150-9 · Cited by 501
Inverse design in search of materials with target functionalities
Zunger, A. (2018) · Nature Reviews Chemistry · doi:10.1038/s41570-018-0121 · Cited by 513
All-optical neural network with nonlinear activation functions
Zuo, Y., Li, B., Zhao, Y., Jiang, Y., Chen, Y.-C., Chen, P., Jo, G.-B., Liu, J., & Du, S. (2019) · Optica · doi:10.1364/optica.6.001132 · Cited by 474
“ANNs also show great potential in scientific researches [3–6], especially in discovering new materials [7], classifying phases of matter [8, 9], representing variational wave functions [10], accelerating Monte Carlo simulations [11, 12], etc.”
BackgroundMaterials Synthesis Insights from Scientific Literature via Text Extraction and Machine Learning
Kim, E., Huang, K., Saunders, A., McCallum, A., Ceder, G., & Olivetti, E. (2017) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b03500 · Cited by 473
Zhang, Y., Wen, C., Wang, C., Antonov, S., Xue, D., Bai, Y., & Su, Y. (2020) · Acta Materialia · doi:10.1016/j.actamat.2019.11.067 · Cited by 461
Artificial intelligence in drug discovery: recent advances and future perspectives
Jiménez-Luna, J., Grisoni, F., Weskamp, N., & Schneider, G. (2021) · Expert Opinion on Drug Discovery · doi:10.1080/17460441.2021.1909567 · Cited by 464
“The current chemical reaction databases are heavily skewed toward productive reaction data [176].”
BackgroundOptimizing Chemical Reactions with Deep Reinforcement Learning
Zhou, Z., Li, X., & Zare, R. N. (2017) · ACS Central Science · doi:10.1021/acscentsci.7b00492 · Cited by 437
Self-assembly as a key player for materials nanoarchitectonics
Ariga, K., Nishikawa, M., Mori, T., Takeya, J., Shrestha, L. K., & Hill, J. P. (2019) · Science and Technology of Advanced Materials · doi:10.1080/14686996.2018.1553108 · Cited by 445
Autonomous experimentation systems for materials development: A community perspective
Stach, E., DeCost, B., Kusne, A. G., Hattrick-Simpers, J., Brown, K. A., Reyes, K. G., Schrier, J., Billinge, S., Buonassisi, T., Foster, I., et al. (2021) · Matter · doi:10.1016/j.matt.2021.06.036 · Cited by 398
Self-citationChen, X., Hou, T., Persson, K. A., & Zhang, Q. (2019) · Materials Today · doi:10.1016/j.mattod.2018.04.007 · Cited by 446
The Role of Machine Learning in the Understanding and Design of Materials
Moosavi, S. M., Jablonka, K. M., & Smit, B. (2020) · Journal of the American Chemical Society · doi:10.1021/jacs.0c09105 · Cited by 433
Sendek, A. D., Yang, Q., Cubuk, E. D., Duerloo, K.-A. N., Cui, Y., & Reed, E. J. (2017) · Energy & Environmental Science · doi:10.1039/c6ee02697d · Cited by 448
Accelerated data-driven materials science with the Materials Project
Horton, M. K., Huck, P., Yang, R. X., Munro, J. M., Dwaraknath, S., Ganose, A. M., Kingsbury, R. S., Wen, M., Shen, J. X., Mathis, T. S., et al. (2025) · Nature Materials · doi:10.1038/s41563-025-02272-0 · Cited by 300
“It is important to note, however, that the published literature rarely documents failures and ‘dark reactions’, whose inclusion is crucial in any data-driven methodology 93 .”
Machine learning for high-entropy alloys: Progress, challenges and opportunities
Liu, X., Zhang, J., & Pei, Z. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.101018 · Cited by 397
“The negative results are also valuable for quality-critical data balance, as exemplified by a study on inorganic-organic hybrid materials [212].”
BackgroundInverse design of nanoporous crystalline reticular materials with deep generative models
Yao, Z., Sánchez-Lengeling, B., Bobbitt, N. S., Bucior, B. J., Kumar, S. G. H., Collins, S. P., Burns, T., Woo, T. K., Farha, O. K., Snurr, R. Q., et al. (2021) · Nature Machine Intelligence · doi:10.1038/s42256-020-00271-1 · Cited by 400
Next-Generation Experimentation with Self-Driving Laboratories
Häse, F., Roch, L. M., & Aspuru-Guzik, A. (2019) · Trends in Chemistry · doi:10.1016/j.trechm.2019.02.007 · Cited by 426
Accelerated Discovery of Large Electrostrains in BaTiO3‐Based Piezoelectrics Using Active Learning
Yuan, R., Liu, Z., Balachandran, P. V., Xue, D., Zhou, Y., Ding, X., Sun, J., Xue, D., & Lookman, T. (2018) · Advanced Materials · doi:10.1002/adma.201702884 · Cited by 395
Machine-Learning-Assisted Accurate Band Gap Predictions of Functionalized MXene
Rajan, A. C., Mishra, A., Satsangi, S., Vaish, R., Mizuseki, H., Lee, K.-R., & Singh, A. K. (2018) · Chemistry of Materials · doi:10.1021/acs.chemmater.8b00686 · Cited by 396
Machine learning: Accelerating materials development for energy storage and conversion
Chen, A., Zhang, X., & Zhou, Z. (2020) · InfoMat · doi:10.1002/inf2.12094 · Cited by 370
“With the progress of MGI, several databases have been built but more published data were not embodied by databases and even more “failed data” that can be used to train ML models were not reported.(205) In future, researchers could report the data in a computer readable form to further share data.”
MethodJacobsson, T. J., Hultqvist, A., García-Fernández, A., Anand, A., Al-Ashouri, A., Hagfeldt, A., Crovetto, A., Abate, A., Ricciardulli, A. G., Vijayan, A., et al. (2021) · Nature Energy · doi:10.1038/s41560-021-00941-3 · Cited by 372
Autonomous Discovery in the Chemical Sciences Part I: Progress
Coley, C. W., Eyke, N. S., & Jensen, K. F. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.201909987 · Cited by 317
Novel Heterogeneous Catalysts for CO2 Hydrogenation to Liquid Fuels
Gao, P., Zhang, L., Li, S., Zhou, Z., & Sun, Y. (2020) · ACS Central Science · doi:10.1021/acscentsci.0c00976 · Cited by 361
Crystal Structure Prediction via Deep Learning
Ryan, K., Lengyel, J., & Shatruk, M. (2018) · Journal of the American Chemical Society · doi:10.1021/jacs.8b03913 · Cited by 355
Nandy, A., Duan, C., Taylor, M. G., Liu, F., Steeves, A. H., & Kulik, H. J. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00347 · Cited by 358
Frey, N. C., Wang, J., Vega Bellido, G. I., Anasori, B., Gogotsi, Y., & Shenoy, V. B. (2019) · ACS Nano · doi:10.1021/acsnano.8b08014 · Cited by 346
Jha, D., Choudhary, K., Tavazza, F., Liao, W.-K., Choudhary, A., Campbell, C., & Agrawal, A. (2019) · Nature Communications · doi:10.1038/s41467-019-13297-w · Cited by 339
Machine Learning in Chemical Engineering: Strengths, Weaknesses, Opportunities, and Threats
Dobbelaere, M. R., Plehiers, P. P., Van de Vijver, R., Stevens, C. V., & Van Geem, K. M. (2021) · Engineering · doi:10.1016/j.eng.2021.03.019 · Cited by 323
Dimiduk, D. M., Holm, E. A., & Niezgoda, S. R. (2018) · Integrating Materials and Manufacturing Innovation · doi:10.1007/s40192-018-0117-8 · Cited by 347
Sun, W., Zheng, Y., Yang, K., Zhang, Q., Shah, A. A., Wu, Z., Sun, Y., Feng, L., Chen, D., Xiao, Z., et al. (2019) · Science Advances · doi:10.1126/sciadv.aay4275 · Cited by 344
Material structure-property linkages using three-dimensional convolutional neural networks
Cecen, A., Dai, H., Yabansu, Y. C., Kalidindi, S. R., & Song, L. (2018) · Acta Materialia · doi:10.1016/j.actamat.2017.11.053 · Cited by 336
Tackling climate change with machine learning
Rolnick, D., Donti, P. L., Kaack, L. H., Kochanski, K., Lacoste, A., Sankaran, K., Ross, A. S., Milojevic-Dupont, N., Jaques, N., Waldman-Brown, A., et al. (2023) · ACM Computing Surveys · doi:10.1145/3485128 · Cited by 336
The 2019 materials by design roadmap
Alberi, K., Nardelli, M. B., Zakutayev, A., Mitas, L., Curtarolo, S., Jain, A., Fornari, M., Marzari, N., Takeuchi, I., Green, M. L., et al. (2019) · Journal of Physics D: Applied Physics · doi:10.1088/1361-6463/aad926 · Cited by 322
Nanostructural metallic materials: Structures and mechanical properties
Sun, L. G., Wu, G., Wang, Q., & Lu, J. (2020) · Materials Today · doi:10.1016/j.mattod.2020.04.005 · Cited by 326
Intelligent nanophotonics: merging photonics and artificial intelligence at the nanoscale
Yao, K., Unni, R., & Zheng, Y. (2019) · Nanophotonics · doi:10.1515/nanoph-2018-0183 · Cited by 302
“Recently, owing to its extraordinary capability in finding solutions from an enormous parameter space, researchers have started using deep learning in drug discovery [19], materials design [16, 18, 128], microscopy and spectroscopy [129–134], and other physics-related domains [135–137].”
BackgroundCao, B., Adutwum, L. A., Oliynyk, A. O., Luber, E. J., Olsen, B. C., Mar, A., & Buriak, J. M. (2018) · ACS Nano · doi:10.1021/acsnano.8b04726 · Cited by 316
Synthetic organic chemistry driven by artificial intelligence
de Almeida, A. F., Moreira, R., & Rodrigues, T. (2019) · Nature Reviews Chemistry · doi:10.1038/s41570-019-0124-0 · Cited by 303
Machine learning-driven new material discovery
Cai, J., Chu, X., Xu, K., Li, H., & Wei, J. (2020) · Nanoscale Advances · doi:10.1039/d0na00388c · Cited by 296
Artificial Intelligence in Chemistry: Current Trends and Future Directions
Baum, Z. J., Yu, X., Ayala, P. Y., Zhao, Y., Watkins, S. P., & Zhou, Q. (2021) · Journal of Chemical Information and Modeling · doi:10.1021/acs.jcim.1c00619 · Cited by 286
Zhang, H., Fu, H., He, X., Wang, C., Jiang, L., Chen, L.-Q., & Xie, J. (2020) · Acta Materialia · doi:10.1016/j.actamat.2020.09.068 · Cited by 310
Zhu, L.-T., Chen, X.-Z., Ouyang, B., Yan, W.-C., Lei, H., Chen, Z., & Luo, Z.-H. (2022) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.2c01036 · Cited by 294
The reformation of catalyst: From a trial-and-error synthesis to rational design
Wang, L., Wu, J., Wang, S., Liu, H., Wang, Y., & Wang, D. (2024) · Nano Research · doi:10.1007/s12274-023-6037-8 · Cited by 300
Machine learning for renewable energy materials
Gu, G. H., Noh, J., Kim, I., & Jung, Y. (2019) · Journal of Materials Chemistry A · doi:10.1039/c9ta02356a · Cited by 311
Text-mined dataset of inorganic materials synthesis recipes
Kononova, O., Huo, H., He, T., Rong, Z., Botari, T., Sun, W., Tshitoyan, V., & Ceder, G. (2019) · Scientific Data · doi:10.1038/s41597-019-0224-1 · Cited by 259
Smith, J. S., Zubatyuk, R., Nebgen, B., Lubbers, N., Barros, K., Roitberg, A. E., Isayev, O., & Tretiak, S. (2020) · Scientific Data · doi:10.1038/s41597-020-0473-z · Cited by 280
“For example, ML has been applied for the prediction of chemical reactions based on experimental data, but models can be biased due to the lack of available data where reactions fail 12 .”
MethodA Structure-Based Platform for Predicting Chemical Reactivity
Sandfort, F., Strieth-Kalthoff, F., Kühnemund, M., Beecks, C., & Glorius, F. (2020) · Chem · doi:10.1016/j.chempr.2020.02.017 · Cited by 288
Integrating Physics-Based Modeling with Machine Learning: A Survey
Willard, J., Jia, X., Xu, S., Steinbach, M. S., & Kumar, V. (2020) · Cited by 435
Machine learning in materials science: From explainable predictions to autonomous design
Pilania, G. (2021) · Computational Materials Science · doi:10.1016/j.commatsci.2021.110360 · Cited by 281
Machine learning the ropes: principles, applications and directions in synthetic chemistry
Strieth-Kalthoff, F., Sandfort, F., Segler, M. H. S., & Glorius, F. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00786e · Cited by 279
Prediction of chemical reaction yields using deep learning
Schwaller, P., Vaucher, A. C., Laino, T., & Reymond, J.-L. (2021) · Machine Learning: Science and Technology · doi:10.1088/2632-2153/abc81d · Cited by 291
A Machine Learning Approach to Zeolite Synthesis Enabled by Automatic Literature Data Extraction
Jensen, Z., Kim, E., Kwon, S., Gani, T. Z. H., Román-Leshkov, Y., Moliner, M., Corma, A., & Olivetti, E. (2019) · ACS Central Science · doi:10.1021/acscentsci.9b00193 · Cited by 282
Balachandran, P. V., Kowalski, B., Sehirlioglu, A., & Lookman, T. (2018) · Nature Communications · doi:10.1038/s41467-018-03821-9 · Cited by 277
“We fi nd that our SVC rbf classi fi ers performed with an average accuracy of 77.5 ± 6.4%, which is reasonable and not uncommon in the literature 12,15,54 , if dealing with heterogeneous experimental datasets such as the one constructed in this work.”
BackgroundMethodInfluentialAuditing black-box models for indirect influence
Adler, P., Falk, C., Friedler, S. A., Nix, T., Rybeck, G., Scheidegger, C., Smith, B., & Venkatasubramanian, S. (2018) · Knowledge and Information Systems · doi:10.1007/s10115-017-1116-3 · Cited by 280
“The top ranked decision tree features additionally include the averagemolecular polarizability for the organic components, whichwas previously hypothesized as important to synthesis of templated vanadium selenites explored via this data set [24].”
BackgroundResultInfluentialSelf-citationUncovering the eutectics design by machine learning in the Al–Co–Cr–Fe–Ni high entropy system
Wu, Q., Wang, Z., Hu, X., Zheng, T., Yang, Z., He, F., Li, J., & Wang, J. (2020) · Acta Materialia · doi:10.1016/j.actamat.2019.10.043 · Cited by 275
Metadata
- Authors
- Raccuglia, P., Elbert, K. C., Adler, P. D. F., Falk, C., Wenny, M. B., Mollo, A., Zeller, M., Friedler, S. A., Schrier, J., & Norquist, A. J.
- Affiliations
- Haverford College (US)
- Corresponding author
- Friedler, Sorelle A.
- Schrier, Joshua
- Norquist, Alexander J.
- ORCID
- Venue
- Nature
- Published
- 2016-05-04
- Volume
- 533
- Issue
- 7601
- Pages
- 73-76
- ISSN
- 0028-0836 (ISSN-L)
- 1476-4687
- OpenAlex
- W2347129741
- Cited by
- 1,727
- References
- 37
- Citations by year
- 2026: 215 · 2025: 225 · 2024: 214 · 2023: 169 · 2022: 201 · 2021: 206 · 2020: 190 · 2019: 148 · 2018: 95 · 2017: 51 · 2016: 13
- FWCI
- 45.53
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.springer.com/tdm (tdm)
- www.springer.com/tdm (vor)
- Locations
- Nature (publishedVersion)
- PubMed (publishedVersion)
- RePEc: Research Papers in Economics (submittedVersion)
- Topics
- Physical Sciences › Materials Science › Materials Chemistry › Machine Learning in Materials Science
- Life Sciences › Pharmacology, Toxicology and Pharmaceutics › Drug Discovery › Computational Drug Discovery Methods
- Social Sciences › Arts and Humanities › History and Philosophy of Science › History and advancements in chemistry
- Keywords
- dark reaction, chemical reaction prediction, machine learning, hydrothermal synthesis, laboratory notebooks, cheminformatics, organic-inorganic hybrid materials, materials discovery, crystal structure prediction, synthetic route design, Materials Genome Initiative
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.