Machine-learning-assisted materials discovery using failed experiments
The DOI matches its Crossref record; 38 of the 38 references it cites were found in a registry or an index.
Abstract
Inorganic-organic hybrid materials such as organically templated metal oxides, metal-organic frameworks (MOFs) and organohalide perovskites have been studied for decades, and hydrothermal and (non-aqueous) solvothermal syntheses have produced thousands of new materials that collectively contain nearly all the metals in the periodic table. Nevertheless, the formation of these compounds is not fully understood, and development of new compounds relies primarily on exploratory syntheses. Simulation- and data-driven approaches (promoted by efforts such as the Materials Genome Initiative) provide an alternative to experimental trial-and-error. Three major strategies are: simulation-based predictions of physical properties (for example, charge mobility, photovoltaic properties, gas adsorption capacity or lithium-ion intercalation) to identify promising target candidates for synthetic efforts; determination of the structure-property relationship from large bodies of experimental data, enabled by integration with high-throughput synthesis and measurement tools; and clustering on the basis of similar crystallographic structure (for example, zeolite structure classification or gas adsorption properties). Here we demonstrate an alternative approach that uses machine-learning algorithms trained on reaction data to predict reaction outcomes for the crystallization of templated vanadium selenites. We used information on 'dark' reactions--failed or unsuccessful hydrothermal syntheses--collected from archived laboratory notebooks from our laboratory, and added physicochemical property descriptions to the raw notebook information using cheminformatics techniques. We used the resulting data to train a machine-learning model to predict reaction success. When carrying out hydrothermal synthesis experiments using previously untested, commercially available organic building blocks, our machine-learning model outperformed traditional human strategies, and successfully predicted conditions for new organically templated inorganic product formation with a success rate of 89 per cent. Inverting the machine-learning model reveals new hypotheses regarding the conditions for successful product formation.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“For example, in experimental data sets extracted from the literature (14,15,19), there can be positive bias for reporting only successful experiments (16, 107, 108), leading to challenges in classification tasks (17).”
From Machine Learning for the Discovery, Design, and Engineering of Materials. (2022) · cites this paper as [108]
In the citing paper
“ML has had recent success in predicting specific chemical, material, and optical properties without the need for expensive experimentation or brute-force simulation [105,299,490,653], including in aerosols [465,500].”
From Tackling climate change with machine learning (2023) · cites this paper as [653]
Citations
Cites
Cortes, C., & Vapnik, V. (1995) · Machine Learning · doi:10.1007/bf00994018 · Cited by 59,421
Cortes, C., & Vapnik, V. (1995) · Machine-mediated learning · doi:10.1023/a:1022627411411 · Cited by 48,445
LIBSVM: A library for support vector machines
Chang, C.-C., & Lin, C.-J. (2011) · ACM Transactions on Intelligent Systems and Technology · doi:10.1145/1961189.1961199 · Cited by 40,918 · cited 1×
“The SVM was implemented in WEKA 3.7 32,33 ; this implementation included a built-in data-normalization step.”
MethodInfluentialThe Elements of Statistical Learning
Hastie, T., Friedman, J., & Tibshirani, R. (2001) · Springer Series in Statistics · doi:10.1007/978-0-387-21606-5 · Cited by 24,162
The WEKA data mining software: an update
Hall, M., Frank, E., Holmes, G., Pfahringer, B., Reutemann, P., & Witten, I. H. (2009) · ACM SIGKDD Explorations Newsletter · doi:10.1145/1656274.1656278 · Cited by 17,750 · cited 2×
“All data were relabelled with the predicted outcomes of the SVM model and a C4.5 decision tree (implemented in WEKA 3.7) 32 was used to model those predicted outcomes 39 .”
MethodInfluentialThe Cambridge Structural Database: a quarter of a million crystal structures and rising
Allen, F. H. (2002) · Acta Crystallographica Section B Structural Science · doi:10.1107/s0108768102003890 · Cited by 9,898 · cited 2×
“Organically templated metal oxides using these diamines are essentially unknown, as indicated by their near absence from the Cambridge Structural Database 26 (see Methods).”
BackgroundText categorization with Support Vector Machines: Learning with many relevant features
Joachims, T. (1998) · Lecture Notes in Computer Science · doi:10.1007/bfb0026683 · Cited by 7,999
Introduction to Metal–Organic Frameworks
Zhou, H.-C., Long, J. R., & Yaghi, O. M. (2012) · Chemical Reviews · doi:10.1021/cr300014x · Cited by 7,720 · cited 1×
“Inorganic–organic hybrid materials 1–3 such as organically templated metal oxides 1 , metal–organic frameworks (MOFs) 2 and organohalide perovskites 4 have been studied for decades, and hydrothermal and (non-aqueous) solvothermal syntheses have produced thousands of new materials that collectively…”
BackgroundMetal-halide perovskites for photovoltaic and light-emitting devices
Stranks, S. D., & Snaith, H. J. (2015) · Nature Nanotechnology · doi:10.1038/nnano.2015.90 · Cited by 3,392 · cited 1×
“Inorganic–organic hybrid materials 1–3 such as organically templated metal oxides 1 , metal–organic frameworks (MOFs) 2 and organohalide perovskites 4 have been studied for decades, and hydrothermal and (non-aqueous) solvothermal syntheses have produced thousands of new materials that collectively…”
BackgroundOpen-Framework Inorganic Materials
Cheetham, A. K., Férey, G., & Loiseau, T. (1999) · Angewandte Chemie International Edition · doi:10.1002/(sici)1521-3773(19991115)38:22<3268::aid-anie3268>3.0.co;2-u · Cited by 2,426 · cited 1×
“…templated metal oxides 1 , metal–organic frameworks (MOFs) 2 and organohalide perovskites 4 have been studied for decades, and hydrothermal and (non-aqueous) solvothermal syntheses have produced thousands of new materials that collectively contain nearly all the metals in the periodic table 5–9 .”
Background
Cited by
Items 201–300 of 1,006
Skoraczyński, G., Dittwald, P., Miasojedow, B., Szymkuć, S., Gajewska, E. P., Grzybowski, B. A., & Gambin, A. (2017) · Scientific Reports · doi:10.1038/s41598-017-02303-0 · Cited by 153
“…encouraging examples of using ML to predict biological activities of small molecules 10–12 , solubilities 13 , crystal structures 14 , properties of organic photovoltaics 15 and, recently, compositions of reaction mixtures and/ or reaction conditions leading to templated vanadium selenites 16 .”
Backgroundg-C 3 N 4 -based photoelectrodes for photoelectrochemical water splitting: a review
Zou, X., Sun, Z., & Hu, Y. H. (2020) · Journal of Materials Chemistry A · doi:10.1039/d0ta07345h · Cited by 159
Zhao, J., Feng, X., Wang, J., Lian, Y., Ouyang, M., & Burke, A. F. (2023) · Applied Energy · doi:10.1016/j.apenergy.2023.121949 · Cited by 152
Semi-supervised machine-learning classification of materials synthesis procedures
Huo, H., Rong, Z., Kononova, O., Sun, W., Botari, T., He, T., Tshitoyan, V., & Ceder, G. (2019) · npj Computational Materials · doi:10.1038/s41524-019-0204-1 · Cited by 151
Beker, W., Gajewska, E. P., Badowski, T., & Grzybowski, B. A. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201806920 · Cited by 151
Feng, W., Chai, Y., Forth, J., Ashby, P. D., Russell, T. P., & Helms, B. A. (2019) · Nature Communications · doi:10.1038/s41467-019-09042-y · Cited by 151
Inorganic Materials Synthesis Planning with Literature-Trained Neural Networks
Kim, E., Jensen, Z., van Grootel, A., Huang, K., Staib, M., Mysore, S., Chang, H.-S., Strubell, E., McCallum, A., Jegelka, S., et al. (2020) · Journal of Chemical Information and Modeling · doi:10.1021/acs.jcim.9b00995 · Cited by 142
Stoll, A., & Benner, P. (2021) · GAMM-Mitteilungen · doi:10.1002/gamm.202100003 · Cited by 165
“Examples for successful applications of ML techniques in materials science are, for example, to represent inorganic materials [61, 134, 135], predict fundamental properties [29, 79, 100], create atomic potentials [80], identify functional candidates [81, 89, 94], analyze complex reaction networks [157], or guide exper…”
BackgroundTeaching solid mechanics to artificial intelligence—a fast solver for heterogeneous materials
Mianroodi, J. R., Siboni, N. H., & Raabe, D. (2021) · npj Computational Materials · doi:10.1038/s41524-021-00571-z · Cited by 172
Tu, Z., Stuyver, T., & Coley, C. W. (2022) · Chemical Science · doi:10.1039/d2sc05089g · Cited by 174
Hu, J., Duan, C., Nan, C., & Chen, L. (2017) · npj Computational Materials · doi:10.1038/s41524-017-0020-4 · Cited by 156
Nobel Turing Challenge: creating the engine for scientific discovery
Kitano, H. (2021) · npj Systems Biology and Applications · doi:10.1038/s41540-021-00189-3 · Cited by 149
Artificial intelligence-enabled smart mechanical metamaterials: advent and future trends
Jiao, P., & Alavi, A. H. (2020) · International Materials Reviews · doi:10.1080/09506608.2020.1815394 · Cited by 156
Jiang, L., Fu, H., Zhang, H., & Xie, J. (2021) · Acta Materialia · doi:10.1016/j.actamat.2022.117868 · Cited by 148
Chemical reaction networks and opportunities for machine learning
Wen, M., Spotte‐Smith, E. W. C., Blau, S. M., McDermott, M. J., Krishnapriyan, A. S., & Persson, K. A. (2023) · Nature Computational Science · doi:10.1038/s43588-022-00369-z · Cited by 175
“…literature 120 but also to accumulate sufficient reaction data to develop more comprehensive experimental CRNs, including those which contain ‘negative’ reaction data from failed experiments, which has been shown to greatly enhance the performance of ML models predicting reaction outcomes 121 .”
BackgroundIsozaki, A., Harmon, J., Zhou, Y., Li, S., Nakagawa, Y., Hayashi, M., Mikami, H., Lei, C., & Goda, K. (2020) · Lab on a Chip · doi:10.1039/d0lc00521e · Cited by 159
Machine learning accelerates the materials discovery
Fang, J., Xie, M., He, X., Zhang, J., Hu, J., Chen, Y., Yang, Y., & Jin, Q. (2022) · Materials Today Communications · doi:10.1016/j.mtcomm.2022.104900 · Cited by 180
tmQM Dataset─Quantum Geometries and Properties of 86k Transition Metal Complexes
Balcells, D., & Skjelstad, B. B. (2020) · Journal of Chemical Information and Modeling · doi:10.1021/acs.jcim.0c01041 · Cited by 143
Discovery of Intermetallic Compounds from Traditional to Machine-Learning Approaches
Oliynyk, A. O., & Mar, A. (2018) · Accounts of Chemical Research · doi:10.1021/acs.accounts.7b00490 · Cited by 145
Synthesis strategies and design principles for nanosized and hierarchical zeolites
Mallette, A. J., Seo, S., & Rimer, J. D. (2022) · Nature Synthesis · doi:10.1038/s44160-022-00091-8 · Cited by 150
A predicting model for properties of steel using the industrial big data based on machine learning
Guo, S., Yu, J., Liu, X., Wang, C., & Jiang, Q. (2019) · Computational Materials Science · doi:10.1016/j.commatsci.2018.12.056 · Cited by 136
Unified Deep Learning Model for Multitask Reaction Predictions with Explanation
Lu, J., & Zhang, Y. (2022) · Journal of Chemical Information and Modeling · doi:10.1021/acs.jcim.1c01467 · Cited by 129
Artificial Intelligence-Powered Materials Science
Bai, X., & Zhang, X. (2025) · Nano-Micro Letters · doi:10.1007/s40820-024-01634-8 · Cited by 171
“Conventional preparation methods are often laborious and time-consuming, necessitating the exploration of approaches that require fewer experiments and raw materials while achieving biomaterials with desirable properties [88–95].”
Chemical crystallography by serial femtosecond X-ray diffraction
Schriber⧓, E. A., Paley⧓, D. W., Bolotovsky, R., Rosenberg, D. J., Sierra, R. G., Aquila, A., Mendez, D. A., Poitevin, F., Blaschke, J., Bhowmick, A., et al. (2022) · Nature · doi:10.1038/s41586-021-04218-3 · Cited by 140
“Synthetic powder patterns from XFEL shots We use the following approach to construct the powder pattern for unit-cell determination: (1) The DIALS spot-finder is used to harvest Bragg spots from the full dataset.”
High Throughput Methods in the Synthesis, Characterization, and Optimization of Porous Materials
Clayson, I. G., Hewitt, D., Hutereau, M., Pope, T., & Slater, B. (2020) · Advanced Materials · doi:10.1002/adma.202002780 · Cited by 143
Li, X., Zhang, S., Xu, L., & Hong, X. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.202000959 · Cited by 149
Machine learning for halide perovskite materials
Zhang, L., He, M., & Shao, S. (2020) · Nano Energy · doi:10.1016/j.nanoen.2020.105380 · Cited by 130
Zhang, L., Chen, H., Tao, X., Cai, H., Liu, J., Ouyang, Y., Peng, Q., & Du, Y. (2020) · Materials & Design · doi:10.1016/j.matdes.2020.108835 · Cited by 136
“In the past few years, machine learning (ML), one of the data processing methods, has been used to design new materials and predict various performances of materials [34 – 40].”
MethodCombinatorial synthesis for AI-driven materials discovery
Gregoire, J. M., Zhou, L., & Haber, J. A. (2023) · Nature Synthesis · doi:10.1038/s44160-023-00251-4 · Cited by 146
Enabling Catalyst Discovery through Machine Learning and High-Throughput Experimentation
Williams, T., McCullough, K., & Lauterbach, J. A. (2020) · Chemistry of Materials · doi:10.1021/acs.chemmater.9b03043 · Cited by 133
Singh, S., Pareek, M., Changotra, A., Banerjee, S., Bhaskararao, B., Balamurugan, P., & Sunoj, R. B. (2020) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1916392117 · Cited by 143
“In view of the inherent black-box – like aspects in ML, a DT-based analysis (53, 54) was performed on all 368 reactions to examine whether we could derive better chemical insights.”
MethodLiu, P., Huang, H., Antonov, S., Wen, C., Xue, D., Chen, H., Li, L., Feng, Q. C., Omori, T., & Su, Y. (2020) · npj Computational Materials · doi:10.1038/s41524-020-0334-5 · Cited by 134
Machine Learning for Sustainable Energy Systems
Donti, P. L., & Kolter, J. Z. (2021) · Annual Review of Environment and Resources · doi:10.1146/annurev-environ-020220-061831 · Cited by 109
Data augmentation in microscopic images for material data mining
Ma, B., Wei, X., Liu, C., Ban, X., Huang, H., Wang, H. H., Xue, W., Wu, S., Gao, M., Shen, Q., et al. (2020) · npj Computational Materials · doi:10.1038/s41524-020-00392-6 · Cited by 146
Scientific AI in materials science: a path to a sustainable and scalable paradigm
DeCost, B., Hattrick-Simpers, J. R., Trautt, Z., Kusne, A. G., Campo, E. M., & Green, M. (2020) · Machine Learning Science and Technology · doi:10.1088/2632-2153/ab9a20 · Cited by 153
“Great opportunities exist to boost the interpretability of AI models by providing output in the form of either a human interpretable series of selection criteria (e.g. a simple decision tree/process flow diagram) [48], a set of physically meaningful equations, or a textual explanation.”
BackgroundToward Excellence of Electrocatalyst Design by Emerging Descriptor‐Oriented Machine Learning
Liu, J., Luo, W., Wang, L., Zhang, J., Fu, X., & Luo, J. (2022) · Advanced Functional Materials · doi:10.1002/adfm.202110748 · Cited by 127
Bandgap prediction by deep learning in configurationally hybridized graphene and boron nitride
Dong, Y., Wu, C., Zhang, C., Liu, Y., Cheng, J., & Lin, J. (2019) · npj Computational Materials · doi:10.1038/s41524-019-0165-4 · Cited by 136
Muraoka, K., Sada, Y., Miyazaki, D., Chaikittisilp, W., & Okubo, T. (2019) · Nature Communications · doi:10.1038/s41467-019-12394-0 · Cited by 123
AI for Nanomaterials Development in Clean Energy and Carbon Capture, Utilization and Storage (CCUS)
Chen, H., Zheng, Y., Li, J., Li, L., & Wang, X. (2023) · ACS Nano · doi:10.1021/acsnano.3c01062 · Cited by 144
Gas separation by adsorption: technological drivers and opportunities for improvement
Pullumbi, P., Brandani, F., & Brandani, S. (2019) · Current Opinion in Chemical Engineering · doi:10.1016/j.coche.2019.04.008 · Cited by 137
Toward autonomous laboratories: Convergence of artificial intelligence and experimental automation
Xie, Y., Sattari, K., Zhang, C., & Lin, J. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2022.101043 · Cited by 143
Hydration-induced reversible deformation of biological materials
Quan, H., Kisailus, D., & Meyers, M. A. (2020) · Nature Reviews Materials · doi:10.1038/s41578-020-00251-2 · Cited by 131
Progress toward Solid State Synthesis by Design
Chamorro, J. R., & McQueen, T. M. (2018) · Accounts of Chemical Research · doi:10.1021/acs.accounts.8b00382 · Cited by 126
Machine Learning Assisted Synthesis of Metal–Organic Nanocapsules
Xie, Y., Zhang, C., Hu, X., Zhang, C., Kelley, S. P., Atwood, J. L., & Lin, J. (2019) · Journal of the American Chemical Society · doi:10.1021/jacs.9b11569 · Cited by 133
Cost, performance prediction and optimization of a vanadium flow battery by machine-learning
Li, T., Xing, F., Liu, T., Sun, J., Shi, D., Zhang, H., & Li, X. (2020) · Energy & Environmental Science · doi:10.1039/d0ee02543g · Cited by 128
Can artificial intelligence create the next wonder material?
Nosengo, N. (2016) · Nature · doi:10.1038/533022a · Cited by 126
Human versus Robots in the Discovery and Crystallization of Gigantic Polyoxometalates
Duros, V., Grizou, J., Xuan, W., Hosni, Z., Long, D., Miras, H. N., & Cronin, L. (2017) · Angewandte Chemie International Edition · doi:10.1002/anie.201705721 · Cited by 124
Machine Learning for Transition-Metal-Based Hydrogen Generation Electrocatalysts
Wang, M., & Zhu, H. (2021) · ACS Catalysis · doi:10.1021/acscatal.1c00178 · Cited by 122
From Platform to Knowledge Graph: Evolution of Laboratory Automation
Bai, J., Cao, L., Mosbach, S., Akroyd, J., Lapkin, A. A., & Kraft, M. (2022) · JACS Au · doi:10.1021/jacsau.1c00438 · Cited by 141
“However, only ‘good’ experiment results are published and stored in these databases, limiting the opportunity of learning from ‘bad’ examples [117].”
Application of machine learning for advanced material prediction and design
Chan, C. H., Sun, M., & Huang, B. (2022) · EcoMat · doi:10.1002/eom2.12194 · Cited by 123
Jiang, Y., Yang, Z., Guo, J., Li, H., Liu, Y., Guo, Y., Li, M., & Pu, X. (2021) · Nature Communications · doi:10.1038/s41467-021-26226-7 · Cited by 126
Bhowmik, A., Castelli, I. E., García-Lastra, J. M., Jørgensen, P. B., Winther, O., & Vegge, T. (2019) · Energy storage materials · doi:10.1016/j.ensm.2019.06.011 · Cited by 129
Automated Experimentation Powers Data Science in Chemistry
Shi, Y. J., Prieto, P. L., Zepel, T., Grunert, S., & Hein, J. E. (2021) · Accounts of Chemical Research · doi:10.1021/acs.accounts.0c00736 · Cited by 131
Wang, H., Gao, S. L., Wang, B., Ma, Y., Guo, Z., Zhang, K., Yang, Y., Yue, X., Hou, J., Huang, H. J., et al. (2024) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2024.01.086 · Cited by 131
Automation and machine learning augmented by large language models in a catalysis study
Su, Y., Wang, X., Ye, Y., Xie, Y., Xu, Y., Jiang, Y., & Wang, C. (2024) · Chemical Science · doi:10.1039/d3sc07012c · Cited by 107
“The eld of catalyst design and discovery is undergoing a profound transformation, facilitated by the convergence of arti cial intelligence (AI) 1 – 3 and automation systems, 4 – 6 as well as utilization of large data.”
BackgroundLLM-Prop: predicting the properties of crystalline materials using large language models
Rubungo, A. N., Arnold, C. B., Rand, B. P., & Dieng, A. B. (2025) · npj Computational Materials · doi:10.1038/s41524-025-01536-2 · Cited by 144
Data mining-aided materials discovery and optimization
Lu, W., Xiao, R., Yang, J., Li, H., & Zhang, W. (2017) · Journal of Materiomics · doi:10.1016/j.jmat.2017.08.003 · Cited by 134
Machine learning on neutron and x-ray scattering and spectroscopies
Chen, Z., Andrejevic, N., Drucker, N. C., Nguyen, T., Xian, R. P., Smidt, T., Wang, Y., Ernstorfer, R., Tennant, D. M., Chan, M. K. Y., et al. (2021) · Chemical Physics Reviews · doi:10.1063/5.0049111 · Cited by 133
Cheng, L., Welborn, M., Christensen, A. S., & Miller, T. F. (2019) · The Journal of Chemical Physics · doi:10.1063/1.5088393 · Cited by 113
Merging data curation and machine learning to improve nanomedicines
Chen, C., Yaari, Z. A., Apfelbaum, E., Grodzinski, P. A., Shamay, Y., & Heller, D. A. (2022) · Advanced Drug Delivery Reviews · doi:10.1016/j.addr.2022.114172 · Cited by 124
Machine learning for battery research
Wei, Z. X., He, Q., & Zhao, Y. (2022) · Journal of Power Sources · doi:10.1016/j.jpowsour.2022.232125 · Cited by 122
Uncovering structure-property relationships of materials by subgroup discovery
Goldsmith, B. R., Boley, M., Vreeken, J., Scheffler, M., & Ghiringhelli, L. M. (2017) · New Journal of Physics · doi:10.1088/1367-2630/aa57c2 · Cited by 120
Bobbitt, N. S., & Snurr, R. Q. (2019) · Molecular Simulation · doi:10.1080/08927022.2019.1597271 · Cited by 121
Lu, S., Zhou, Q., Ma, L., Guo, Y., & Wang, J. (2019) · Small Methods · doi:10.1002/smtd.201900360 · Cited by 116
Can machine learning find extraordinary materials?
Kauwe, S. K., Graser, J., Murdock, R., & Sparks, T. D. (2019) · Computational Materials Science · doi:10.1016/j.commatsci.2019.109498 · Cited by 121
Filming movies of attosecond charge migration in single molecules with high harmonic spectroscopy
He, L., Sun, S., Lan, P., He, Y., Wang, B., Wang, P. P., Zhu, X., Li, L., Cao, W., Lu, P., et al. (2022) · Nature Communications · doi:10.1038/s41467-022-32313-0 · Cited by 124
Advances in machine learning- and artificial intelligence-assisted material design of steels
Pan, G., Wang, F., Shang, C., Wu, H., Wu, G., Gao, J., Wang, S., Gao, Z., Zhou, X., & Mao, X. (2023) · International Journal of Minerals Metallurgy and Materials · doi:10.1007/s12613-022-2595-0 · Cited by 123
Ouyang, Y., Zhang, Z., Li, D., Chen, J., & Zhang, G. (2019) · Annalen der Physik · doi:10.1002/andp.201800437 · Cited by 117
Machine learning material properties from the periodic table using convolutional neural networks
Zheng, X., Zheng, P., & Zhang, R.-Z. (2018) · Chemical Science · doi:10.1039/c8sc02648c · Cited by 115
Machine learning enables polymer cloud-point engineering via inverse design
Kumar, J., Li, Q., Tang, K. Y., Buonassisi, T., Gonzalez-Oyarce, A. L., & Ye, J. (2019) · npj Computational Materials · doi:10.1038/s41524-019-0209-9 · Cited by 116
Data-Driven Innovation: What Is It?
Luo, J. (2022) · IEEE Transactions on Engineering Management · doi:10.1109/tem.2022.3145231 · Cited by 143
“They can also mine and make use of those passively generated digital footprint data in their proprietary innovation activities, such as the records of prior failed experiments [33] or submissions or entries to their open innovation contests [34].”
BackgroundCan machine learning predict drug nanocrystals?
He, Y., Ye, Z., Liu, X., Wei, Z., Qiu, F., Li, H., Zheng, Y., & Ouyang, D. (2020) · Journal of Controlled Release · doi:10.1016/j.jconrel.2020.03.043 · Cited by 115
Machine learning in energy storage materials
Shen, Z., Liu, H., Shen, Y., Hu, J., Chen, L., & Nan, C. (2022) · Interdisciplinary materials · doi:10.1002/idm2.12020 · Cited by 146
“[92,93,170] Recently, to find better energy storage density of Pb ‐ free BaTiO 3 ‐ based dielectrics at low electric fields as few experiments as possible, an ML ‐ based approach was proposed to search optimal compounds.”
BackgroundAdvances of machine learning in materials science: Ideas and techniques
Chong, S. S., Ng, Y. S., Wang, H., & Zheng, J. (2023) · Frontiers of Physics · doi:10.1007/s11467-023-1325-z · Cited by 126
“[236], [293], [294], [251], [295], [296]”
Designing and understanding light-harvesting devices with machine learning
Häse, F., Roch, L. M., Friederich, P., & Aspuru‐Guzik, A. (2020) · Nature Communications · doi:10.1038/s41467-020-17995-8 · Cited by 119
Lu, Z., Chen, X., Lin, D.-Y., Lin, D., Wu, Y., Zhang, Y., Wang, H., Jiang, S., Li, H., Wang, X., et al. (2020) · npj Computational Materials · doi:10.1038/s41524-020-00460-x · Cited by 113
Nandy, A., Duan, C., & Kulik, H. J. (2021) · Current Opinion in Chemical Engineering · doi:10.1016/j.coche.2021.100778 · Cited by 118
Barrera, M. D. B., Martínez, F. F., & Lantada, A. D. (2021) · Materials · doi:10.3390/ma14185278 · Cited by 114
Li, J., An, X., Liang, J., Zhou, Y., & Sun, X. (2022) · Journal of Material Science and Technology · doi:10.1016/j.jmst.2021.10.041 · Cited by 111
Deep learning-based heterogeneous strategy for customizing responses of lattice structures
Yu, G., Xiao, L., & Song, W. (2022) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2022.107531 · Cited by 114
Accelerating the prediction of stable materials with machine learning
Griesemer, S. D., Xia, Y., & Wolverton, C. M. (2023) · Nature Computational Science · doi:10.1038/s43588-023-00536-w · Cited by 123
Yu, Y., Tan, X., Ning, S., & Wu, Y. (2019) · ACS Energy Letters · doi:10.1021/acsenergylett.8b02451 · Cited by 112
Predicting the hydrogen release ability of LiBH 4 -based mixtures by ensemble machine learning
Ding, Z., Chen, Z., Ma, T., Lu, C., Ma, W., & Shaw, L. L. (2019) · Energy storage materials · doi:10.1016/j.ensm.2019.12.010 · Cited by 113
“…potential in molecule and material modelling, such as searching for superior lithium ion conducting solids [20], predicting atomic-scale properties [21], rational computation-guided co-design [22], high-throughput synthesis [23], and addressing challenges in molecular and materials research [24].”
A review on recent applications of machine learning in mechanical properties of composites
Liang, Y., Wei, X., Peng, Y., Wang, X., & Niu, X. (2024) · Polymer Composites · doi:10.1002/pc.29082 · Cited by 120
Machine learning applications in nanomaterials: Recent advances and future perspectives
Yang, L., Wang, H., Leng, D., Fang, S., Yang, Y., & Du, Y. (2024) · Chemical Engineering Journal · doi:10.1016/j.cej.2024.156687 · Cited by 155
Luo, J., Fu, K., Yu, D., Hristovski, K. D., Westerhoff, P. K., & Crittenden, J. C. (2021) · ACS ES&T Engineering · doi:10.1021/acsestengg.0c00174 · Cited by 110
Li, Y., Lu, Y., Huo, X., Wei, D., Meng, J., Dong, J., Qiao, B., Zhao, S., Xu, Z., & Song, D. (2021) · RSC Advances · doi:10.1039/d1ra03117a · Cited by 108
Artificial intelligence design algorithm for nanocomposites optimized for shear crack resistance
Yu, C., Qin, Z., & Buehler, M. J. (2019) · Nano Futures · doi:10.1088/2399-1984/ab36f0 · Cited by 116
Wu, L., Guo, T., & Li, T. (2021) · iScience · doi:10.1016/j.isci.2021.102398 · Cited by 111
“…in disordered solids (Cubuk et al., 2015), modeling and designing composite materials (Chen and Gu, 2019; Gu et al., 2018a, 2018b), discovering inorganic-organic hybrid materials (Raccuglia et al., 2016), and predicting the new stable structure of quaternary Heusler compounds (Kim et al., 2018).”
BackgroundMaterials design by evolutionary optimization of functional groups in metal-organic frameworks
Collins, S. P., Daff, T. D., Piotrkowski, S. S., & Woo, T. K. (2016) · Science Advances · doi:10.1126/sciadv.1600954 · Cited by 107
Multiphase Microfluidics: Fundamentals, Fabrication, and Functions
Geng, Y., Ling, S., Huang, J., & Xu, J. (2020) · Small · doi:10.1002/smll.201906357 · Cited by 108
Artificial intelligence for breast cancer screening: Opportunity or hype?
Houssami, N., Lee, C. I., Buist, D. S. M., & Tao, D. (2017) · The Breast · doi:10.1016/j.breast.2017.09.003 · Cited by 106
“For example, Raccuglia et al. [16] used the processed unsuccessful hydrothermal synthesis as negative examples to train support vector machines (a supervised learning model).”
MethodZiatdinov, M. A., Dyck, O., Li, X., Sumpter, B. G., Jesse, S., Vasudevan, R. K., & Kalinin, S. V. (2019) · Science Advances · doi:10.1126/sciadv.aaw8989 · Cited by 110
The Rise of Catalyst Informatics: Towards Catalyst Genomics
TAKAHASHI, K. G., Takahashi, L., Miyazato, I., Fujima, J., Tanaka, Y., Uno, T., Satoh, H., Ohno, K., Nishida, M., Hirai, K., et al. (2018) · ChemCatChem · doi:10.1002/cctc.201801956 · Cited by 115
Yuan, R., Tian, Y., Xue, D., Xue, D., Zhou, Y., Ding, X., Sun, J. F., & Lookman, T. (2019) · Advanced Science · doi:10.1002/advs.201901395 · Cited by 114
Ternary Catalysis: A Stepping Stone toward Multicatalysis
Sancheti, S. P., Urvashi, U., Shah, M. P., & Patil, N. T. (2020) · ACS Catalysis · doi:10.1021/acscatal.9b04000 · Cited by 107
Chen, C., Tanaka, K., Kotera, M., & Funatsu, K. (2020) · Journal of Cheminformatics · doi:10.1186/s13321-020-0417-9 · Cited by 115
“Descriptor selection Many studies have noted to achieve model interpretation in many research fields in QSAR/QSPR using interpretable descriptors [34, 35].”
Background(2019) · DSpace@MIT (Massachusetts Institute of Technology) · Cited by 106
Machine learning for predicting thermodynamic properties of pure fluids and their mixtures
Liu, Y., Hong, W., & Cao, B. (2019) · Energy · doi:10.1016/j.energy.2019.116091 · Cited by 111
Accelerated discovery of single-phase refractory high entropy alloys assisted by machine learning
Yan, Y., Lü, D., & Wang, K. (2021) · Computational Materials Science · doi:10.1016/j.commatsci.2021.110723 · Cited by 104
Metadata
- Authors
- Raccuglia, P., Elbert, K. C., Adler, P. D. F., Falk, C., Wenny, M. B., Mollo, A., Zeller, M., Friedler, S. A., Schrier, J., & Norquist, A. J.
- Affiliations
- Haverford College (US)
- Corresponding author
- Friedler, Sorelle A.
- Schrier, Joshua
- Norquist, Alexander J.
- ORCID
- Venue
- Nature
- Published
- 2016-05-04
- Volume
- 533
- Issue
- 7601
- Pages
- 73-76
- ISSN
- 0028-0836 (ISSN-L)
- 1476-4687
- OpenAlex
- W2347129741
- Cited by
- 1,727
- References
- 37
- Citations by year
- 2026: 215 · 2025: 225 · 2024: 214 · 2023: 169 · 2022: 201 · 2021: 206 · 2020: 190 · 2019: 148 · 2018: 95 · 2017: 51 · 2016: 13
- FWCI
- 45.53
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.springer.com/tdm (tdm)
- www.springer.com/tdm (vor)
- Locations
- Nature (publishedVersion)
- PubMed (publishedVersion)
- RePEc: Research Papers in Economics (submittedVersion)
- Topics
- Physical Sciences › Materials Science › Materials Chemistry › Machine Learning in Materials Science
- Life Sciences › Pharmacology, Toxicology and Pharmaceutics › Drug Discovery › Computational Drug Discovery Methods
- Social Sciences › Arts and Humanities › History and Philosophy of Science › History and advancements in chemistry
- Keywords
- dark reaction, chemical reaction prediction, machine learning, hydrothermal synthesis, laboratory notebooks, cheminformatics, organic-inorganic hybrid materials, materials discovery, crystal structure prediction, synthetic route design, Materials Genome Initiative
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.