The DOI matches its Crossref record; 31 of the 31 references it cites were found in a registry or an index.
An integrated design and fabrication strategy for entirely soft, autonomous robots
Open accessAbstract
Soft robots possess many attributes that are difficult, if not impossible, to achieve with conventional robots composed of rigid materials. Yet, despite recent advances, soft robots must still be tethered to hard robotic control systems and power sources. New strategies for creating completely soft robots, including soft analogues of these crucial components, are needed to realize their full potential. Here we report the untethered operation of a robot composed solely of soft materials. The robot is controlled with microfluidic logic that autonomously regulates fluid flow and, hence, catalytic decomposition of an on-board monopropellant fuel supply. Gas generated from the fuel decomposition inflates fluidic networks downstream of the reaction sites, resulting in actuation. The body and microfluidic logic of the robot are fabricated using moulding and soft lithography, respectively, and the pneumatic actuator networks, on-board fuel reservoirs and catalytic reaction chambers needed for movement are patterned within the body via a multi-material, embedded 3D printing technique. The fluidic and elastomeric architectures required for function span several orders of magnitude from the microscale to the macroscale. Our integrated design and rapid fabrication approach enables the programmable assembly of multiple materials within this architecture, laying the foundation for completely soft, autonomous robots.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Design, fabrication and control of soft robots
Rus, D., & Tolley, M. T. (2015) · Nature · doi:10.1038/nature14543 · Cited by 5,825
Shepherd, R. F., Ilievski, F., Choi, W., Morin, S. A., Stokes, A. A., Mazzeo, A. D., Chen, X., Wang, M., & Whitesides, G. M. (2011) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1116564108 · Cited by 2,111
Self-citation3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs
Kolesky, D. B., Truby, R. L., Gladman, A. S., Busbee, T. A., Homan, K. A., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201305506 · Cited by 2,102
Self-citationEmbedded 3D Printing of Strain Sensors within Highly Stretchable Elastomers
Muth, J. T., Vogt, D. M., Truby, R. L., Mengüç, Y., Kolesky, D. B., Wood, R. J., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201400334 · Cited by 1,611
Self-citationPneumatic Networks for Soft Robotics that Actuate Rapidly
Mosadegh, B., Polygerinos, P., Keplinger, C., Wennstedt, S., Shepherd, R. F., Gupta, U., Shim, J., Bertoldi, K., Walsh, C. J., & Whitesides, G. M. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201303288 · Cited by 1,607
Self-citationUniversal robotic gripper based on the jamming of granular material
Brown, E., Rodenberg, N., Amend, J., Mozeika, A., Steltz, E., Zakin, M. R., Lipson, H., & Jaeger, H. M. (2010) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1003250107 · Cited by 1,603
Barnes, H. A. (1997) · Journal of Non-Newtonian Fluid Mechanics · doi:10.1016/s0377-0257(97)00004-9 · Cited by 1,535
Softening of Rubber by Deformation
Mullins, L. (1969) · Rubber Chemistry and Technology · doi:10.5254/1.3539210 · Cited by 1,232
A Resilient, Untethered Soft Robot
Tolley, M. T., Shepherd, R. F., Mosadegh, B., Galloway, K. C., Wehner, M., Karpelson, M., Wood, R. J., & Whitesides, G. M. (2014) · Soft Robotics · doi:10.1089/soro.2014.0008 · Cited by 1,089
Self-citationA 3D-printed, functionally graded soft robot powered by combustion
Bartlett, N. W., Tolley, M. T., Overvelde, J. T. B., Weaver, J. C., Mosadegh, B., Bertoldi, K., Whitesides, G. M., & Wood, R. J. (2015) · Science · doi:10.1126/science.aab0129 · Cited by 1,052
Self-citationAutonomous Soft Robotic Fish Capable of Escape Maneuvers Using Fluidic Elastomer Actuators
Marchese, A. D., Onal, C. D., & Rus, D. (2014) · Soft Robotics · doi:10.1089/soro.2013.0009 · Cited by 928
Omnidirectional Printing of 3D Microvascular Networks
Wu, W., DeConinck, A., & Lewis, J. A. (2011) · Advanced Materials · doi:10.1002/adma.201004625 · Cited by 819
Self-citationGoQBot: a caterpillar-inspired soft-bodied rolling robot
Lin, H.-T., Leisk, G. G., & Trimmer, B. (2011) · Bioinspiration & Biomimetics · doi:10.1088/1748-3182/6/2/026007 · Cited by 690
Multi-functional dielectric elastomer artificial muscles for soft and smart machines
Anderson, I. A., Gisby, T. A., McKay, T. G., O’Brien, B. M., & Calius, E. P. (2012) · Journal of Applied Physics · doi:10.1063/1.4740023 · Cited by 619
Prakash, M., & Gershenfeld, N. (2007) · Science · doi:10.1126/science.1136907 · Cited by 511
Biomimetic Hydrogel‐Based Actuating Systems
Ionov, L. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201203692 · Cited by 469
Reversible patterning and actuation of hydrogels by electrically assisted ionoprinting
Palleau, E., Morales, D., Dickey, M. D., & Velev, O. D. (2013) · Nature Communications · doi:10.1038/ncomms3257 · Cited by 445
Using Explosions to Power a Soft Robot
Shepherd, R. F., Stokes, A. A., Freake, J., Barber, J., Snyder, P. W., Mazzeo, A. D., Cademartiri, L., Morin, S. A., & Whitesides, G. M. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201209540 · Cited by 332
Self-citationMosadegh, B., Kuo, C.-H., Tung, Y.-C., Torisawa, Y.-S., Bersano-Begey, T., Tavana, H., & Takayama, S. (2010) · Nature Physics · doi:10.1038/nphys1637 · Cited by 286
Self-citationPneumatic Energy Sources for Autonomous and Wearable Soft Robotics
Wehner, M., Tolley, M. T., Mengüç, Y., Park, Y.-L., Mozeika, A., Ding, Y., Onal, C., Shepherd, R. F., Whitesides, G. M., & Wood, R. J. (2014) · Soft Robotics · doi:10.1089/soro.2014.0018 · Cited by 284
Self-citation3D printing antagonistic systems of artificial muscle using projection stereolithography
Peele, B. N., Wallin, T. J., Zhao, H., & Shepherd, R. F. (2015) · Bioinspiration & Biomimetics · doi:10.1088/1748-3190/10/5/055003 · Cited by 265
Permeation-driven flow in poly(dimethylsiloxane) microfluidic devices.
Randall, G. C., & Doyle, P. S. (2005) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0503287102 · Cited by 220
Soft Machines That are Resistant to Puncture and That Self Seal
Shepherd, R. F., Stokes, A. A., Nunes, R. M. D., & Whitesides, G. M. (2013) · Advanced Materials · doi:10.1002/adma.201303175 · Cited by 196
Self-citationSoft Mobile Robots with On-Board Chemical Pressure Generation
Onal, C. D., Chen, X., Whitesides, G. M., & Rus, D. (2017) · Springer Tracts in Advanced Robotics · doi:10.1007/978-3-319-29363-9_30 · Cited by 171
Self-citationStatic control logic for microfluidic devices using pressure-gain valves
Weaver, J., Melin, J., Stark, D., Quake, S. R., & Horowitz, M. (2010) · Nature Physics · doi:10.1038/nphys1513 · Cited by 142
Whitesides, G. M. (2010) · Lab on a Chip · doi:10.1039/c0lc90101f · Cited by 116
Self-citationElastic materials producing compliant robots
Suzumori, K. (1996) · Robotics and Autonomous Systems · doi:10.1016/0921-8890(95)00078-x · Cited by 110
Deformation in Soft-Matter Robotics: A Categorization and Quantitative Characterization
Wang, L., & Fumiya Iida, A. (2015) · IEEE Robotics & Automation Magazine · doi:10.1109/mra.2015.2448277 · Cited by 89
Microfluidic logic gates and timers
Toepke, M. W., Abhyankar, V. V., & Beebe, D. J. (2007) · Lab on a Chip · doi:10.1039/b708764k · Cited by 73
Mosadegh, B., Tavana, H., Lesher‐Pérez, S. C., & Takayama, S. (2010) · Lab on a Chip · doi:10.1039/c0lc00112k · Cited by 54
Self-citationIntegrated flexible microactuator systems
Suzumori, K., Koga, A., Kondo, F., & 羽田里代子 (1996) · Robotica · doi:10.1017/s0263574700019974 · Cited by 22
Research works printed but not linked: 4
- Gorissen, B., De Volder, M., De Greef, A. & Reynaerts, D. Theoretical and experimental analysis of pneumatic balloon microactuators. Sens. Actuat. A 168, 58–65 (2011) · doi:10.1016/j.sna.2011.03.057
- Jensen, E. C., Grover, W. H. & Mathies, R. A. Micropneumatic digital logic structures for integrated microdevice computation and control. J. Microelectromech. Syst. 16, 1378–1385 (2007) · doi:10.1109/jmems.2007.906080
- Rhee, M. & Burns, M. A. Microfluidic pneumatic logic circuits and digital pneumatic microprocessors for integrated microfluidic systems. Lab Chip 9, 3131–3143 (2009) · doi:10.1039/b904354c
- Groisman, A., Enzelberger, M. & Quake, S. R. Microfluidic memory and control devices. Science 300, 955–958 (2003) · doi:10.1126/science.1083694
Cited by
Small-scale soft-bodied robot with multimodal locomotion
Hu, W., Lum, G. Z., Mastrangeli, M., & Sitti, M. (2018) · Nature · doi:10.1038/nature25443 · Cited by 2,372
Printing ferromagnetic domains for untethered fast-transforming soft materials
Kim, Y., Yuk, H., Zhao, R., Chester, S. A., & Zhao, X. (2018) · Nature · doi:10.1038/s41586-018-0185-0 · Cited by 2,183
Printing soft matter in three dimensions
Truby, R. L., & Lewis, J. A. (2016) · Nature · doi:10.1038/nature21003 · Cited by 1,622
Self-citationSoft robotics: Technologies and systems pushing the boundaries of robot abilities
Laschi, C., Mazzolai, B., & Cianchetti, M. (2016) · Science Robotics · doi:10.1126/scirobotics.aah3690 · Cited by 1,570
Technology Roadmap for Flexible Sensors
Luo, Y., Abidian, M. R., Ahn, J.-H., Akinwande, D., Andrews, A. M., Antonietti, M., Bao, Z., Berggren, M., Berkey, C. A., Bettinger, C. J., et al. (2023) · ACS Nano · doi:10.1021/acsnano.2c12606 · Cited by 1,383
Metadata
- Authors
- Wehner, M., Truby, R. L., Fitzgerald, D. J., Mosadegh, B., Whitesides, G. M., Lewis, J. A., & Wood, R. J.
- Venue
- Nature
- Published
- 2016-08
- Volume
- 536
- Issue
- 7617
- Pages
- 451-455
- ISSN
- 0028-0836 (ISSN-L)
- 1476-4687
- OpenAlex
- W2515930553
- Cited by
- 2,127
- References
- 31
- FWCI
- 82.53
- Type
- journal article
- Language
- en
- Open access
- green
- Licence
- www.springer.com/tdm (tdm)
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.