The DOI matches its Crossref record; 31 of the 31 references it cites were found in a registry or an index.
An integrated design and fabrication strategy for entirely soft, autonomous robots
Open accessAbstract
Soft robots possess many attributes that are difficult, if not impossible, to achieve with conventional robots composed of rigid materials. Yet, despite recent advances, soft robots must still be tethered to hard robotic control systems and power sources. New strategies for creating completely soft robots, including soft analogues of these crucial components, are needed to realize their full potential. Here we report the untethered operation of a robot composed solely of soft materials. The robot is controlled with microfluidic logic that autonomously regulates fluid flow and, hence, catalytic decomposition of an on-board monopropellant fuel supply. Gas generated from the fuel decomposition inflates fluidic networks downstream of the reaction sites, resulting in actuation. The body and microfluidic logic of the robot are fabricated using moulding and soft lithography, respectively, and the pneumatic actuator networks, on-board fuel reservoirs and catalytic reaction chambers needed for movement are patterned within the body via a multi-material, embedded 3D printing technique. The fluidic and elastomeric architectures required for function span several orders of magnitude from the microscale to the macroscale. Our integrated design and rapid fabrication approach enables the programmable assembly of multiple materials within this architecture, laying the foundation for completely soft, autonomous robots.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Design, fabrication and control of soft robots
Rus, D., & Tolley, M. T. (2015) · Nature · doi:10.1038/nature14543 · Cited by 5,825
Shepherd, R. F., Ilievski, F., Choi, W., Morin, S. A., Stokes, A. A., Mazzeo, A. D., Chen, X., Wang, M., & Whitesides, G. M. (2011) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1116564108 · Cited by 2,111
Self-citation3D bioprinting of vascularized, heterogeneous cell-laden tissue constructs
Kolesky, D. B., Truby, R. L., Gladman, A. S., Busbee, T. A., Homan, K. A., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201305506 · Cited by 2,102
Self-citationEmbedded 3D Printing of Strain Sensors within Highly Stretchable Elastomers
Muth, J. T., Vogt, D. M., Truby, R. L., Mengüç, Y., Kolesky, D. B., Wood, R. J., & Lewis, J. A. (2014) · Advanced Materials · doi:10.1002/adma.201400334 · Cited by 1,611
Self-citationPneumatic Networks for Soft Robotics that Actuate Rapidly
Mosadegh, B., Polygerinos, P., Keplinger, C., Wennstedt, S., Shepherd, R. F., Gupta, U., Shim, J., Bertoldi, K., Walsh, C. J., & Whitesides, G. M. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201303288 · Cited by 1,607
Self-citationUniversal robotic gripper based on the jamming of granular material
Brown, E., Rodenberg, N., Amend, J., Mozeika, A., Steltz, E., Zakin, M. R., Lipson, H., & Jaeger, H. M. (2010) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1003250107 · Cited by 1,603
Barnes, H. A. (1997) · Journal of Non-Newtonian Fluid Mechanics · doi:10.1016/s0377-0257(97)00004-9 · Cited by 1,535
Softening of Rubber by Deformation
Mullins, L. (1969) · Rubber Chemistry and Technology · doi:10.5254/1.3539210 · Cited by 1,232
A Resilient, Untethered Soft Robot
Tolley, M. T., Shepherd, R. F., Mosadegh, B., Galloway, K. C., Wehner, M., Karpelson, M., Wood, R. J., & Whitesides, G. M. (2014) · Soft Robotics · doi:10.1089/soro.2014.0008 · Cited by 1,089
Self-citationA 3D-printed, functionally graded soft robot powered by combustion
Bartlett, N. W., Tolley, M. T., Overvelde, J. T. B., Weaver, J. C., Mosadegh, B., Bertoldi, K., Whitesides, G. M., & Wood, R. J. (2015) · Science · doi:10.1126/science.aab0129 · Cited by 1,052
Self-citation
Research works printed but not linked: 4
- Gorissen, B., De Volder, M., De Greef, A. & Reynaerts, D. Theoretical and experimental analysis of pneumatic balloon microactuators. Sens. Actuat. A 168, 58–65 (2011) · doi:10.1016/j.sna.2011.03.057
- Jensen, E. C., Grover, W. H. & Mathies, R. A. Micropneumatic digital logic structures for integrated microdevice computation and control. J. Microelectromech. Syst. 16, 1378–1385 (2007) · doi:10.1109/jmems.2007.906080
- Rhee, M. & Burns, M. A. Microfluidic pneumatic logic circuits and digital pneumatic microprocessors for integrated microfluidic systems. Lab Chip 9, 3131–3143 (2009) · doi:10.1039/b904354c
- Groisman, A., Enzelberger, M. & Quake, S. R. Microfluidic memory and control devices. Science 300, 955–958 (2003) · doi:10.1126/science.1083694
Cited by
Small-scale soft-bodied robot with multimodal locomotion
Hu, W., Lum, G. Z., Mastrangeli, M., & Sitti, M. (2018) · Nature · doi:10.1038/nature25443 · Cited by 2,372
Printing ferromagnetic domains for untethered fast-transforming soft materials
Kim, Y., Yuk, H., Zhao, R., Chester, S. A., & Zhao, X. (2018) · Nature · doi:10.1038/s41586-018-0185-0 · Cited by 2,183
Printing soft matter in three dimensions
Truby, R. L., & Lewis, J. A. (2016) · Nature · doi:10.1038/nature21003 · Cited by 1,622
Self-citationSoft robotics: Technologies and systems pushing the boundaries of robot abilities
Laschi, C., Mazzolai, B., & Cianchetti, M. (2016) · Science Robotics · doi:10.1126/scirobotics.aah3690 · Cited by 1,570
Technology Roadmap for Flexible Sensors
Luo, Y., Abidian, M. R., Ahn, J.-H., Akinwande, D., Andrews, A. M., Antonietti, M., Bao, Z., Berggren, M., Berkey, C. A., Bettinger, C. J., et al. (2023) · ACS Nano · doi:10.1021/acsnano.2c12606 · Cited by 1,383
Fundamentals and applications of 3D printing for novel materials
Lee, J.-Y., An, J., & Chua, C. K. (2017) · Applied Materials Today · doi:10.1016/j.apmt.2017.02.004 · Cited by 1,354
Soft Actuators for Small-Scale Robotics
Hines, L., Petersen, K., Lum, G. Z., & Sitti, M. (2017) · Advanced Materials · doi:10.1002/adma.201603483 · Cited by 1,337
Direct Ink Writing: A 3D Printing Technology for Diverse Materials
Saadi, M. A. S. R., Maguire, A., Pottackal, N. T., Thakur, M. S. H., Ikram, M. M., Hart, A. J., Ajayan, P. M., & Rahman, M. M. (2022) · Advanced Materials · doi:10.1002/adma.202108855 · Cited by 1,335
Self-powered soft robot in the Mariana Trench
Li, G., Chen, X., Zhou, F., Liang, Y., Xiao, Y., Cao, X., Zhang, Z., Zhang, M., Wu, B., Yin, S., et al. (2021) · Nature · doi:10.1038/s41586-020-03153-z · Cited by 1,198
The grand challenges of Science Robotics
Yang, G.-Z., Bellingham, J., Dupont, P. E., Fischer, P., Floridi, L., Full, R., Jacobstein, N., Kumar, V., McNutt, M., Merrifield, R., et al. (2018) · Science Robotics · doi:10.1126/scirobotics.aar7650 · Cited by 1,177
Self-citationAdvances in 4D Printing: Materials and Applications
Kuang, X., Roach, D. J., Wu, J., Hamel, C. M., Ding, Z., Wang, T., Dunn, M. L., & Qi, H. J. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201805290 · Cited by 1,095
Polygerinos, P., Correll, N., Morin, S. A., Mosadegh, B., Onal, C. D., Petersen, K., Cianchetti, M., Tolley, M. T., & Shepherd, R. F. (2017) · Advanced Engineering Materials · doi:10.1002/adem.201700016 · Cited by 1,063
Self-citationVoxelated soft matter via multimaterial multinozzle 3D printing
Skylar-Scott, M. A., Mueller, J., Visser, C. W., & Lewis, J. A. (2019) · Nature · doi:10.1038/s41586-019-1736-8 · Cited by 1,024
Self-citationRich, S. I., Wood, R. J., & Majidi, C. (2018) · Nature Electronics · doi:10.1038/s41928-018-0024-1 · Cited by 1,022
Self-citationBiomanufacturing of organ-specific tissues with high cellular density and embedded vascular channels
Skylar-Scott, M. A., Uzel, S. G. M., Nam, L. L., Ahrens, J. H., Truby, R. L., Damaraju, S., & Lewis, J. A. (2019) · Science Advances · doi:10.1126/sciadv.aaw2459 · Cited by 943
Self-citation3D printing of soft robotic systems
Wallin, T. J., Pikul, J., & Shepherd, R. F. (2018) · Nature Reviews Materials · doi:10.1038/s41578-018-0002-2 · Cited by 942
Highly Stretchable, Elastic, and Ionic Conductive Hydrogel for Artificial Soft Electronics
Zhou, Y., Wan, C., Yang, Y., Yang, H., Wang, S., Dai, Z., Ji, K., Jiang, H., Chen, X., & Long, Y. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201806220 · Cited by 933
Fast-moving soft electronic fish
Li, T., Li, G., Liang, Y., Cheng, T., Dai, J., Yang, X., Liu, B., Zeng, Z., Huang, Z., Luo, Y., et al. (2017) · Science Advances · doi:10.1126/sciadv.1602045 · Cited by 882
Soft actuators for real-world applications
Li, M., Pal, A., Aghakhani, A., Pena-Francesch, A., & Sitti, M. (2021) · Nature Reviews Materials · doi:10.1038/s41578-021-00389-7 · Cited by 880
Magnetic Soft Materials and Robots
Kim, Y., & Zhao, X. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00481 · Cited by 873
3D printing of hydrogels: Rational design strategies and emerging biomedical applications
Li, J., Wu, C., Chu, P. K., & Gelinsky, M. (2020) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100543 · Cited by 862
PDMS with designer functionalities—Properties, modifications strategies, and applications
Wolf, M. P., Salieb-Beugelaar, G. B., & Hunziker, P. (2018) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.06.001 · Cited by 853
Whitesides, G. M. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201800907 · Cited by 850
Self-citationSmart Textile‐Integrated Microelectronic Systems for Wearable Applications
Shi, J., Liu, S., Zhang, L., Yang, B., Shu, L., Yang, Y., Ren, M., Wang, Y., Chen, J., Chen, W., et al. (2020) · Advanced Materials · doi:10.1002/adma.201901958 · Cited by 822
A highly sensitive, self-powered triboelectric auditory sensor for social robotics and hearing aids
Guo, H., Pu, X., Chen, J., Meng, Y., Yeh, M.-H., Liu, G., Tang, Q., Chen, B., Liu, D., Qi, S., et al. (2018) · Science Robotics · doi:10.1126/scirobotics.aat2516 · Cited by 786
3D printing of liquid crystal elastomeric actuators with spatially programed nematic order
Kotikian, A., Truby, R. L., Boley, J. W., White, T. J., & Lewis, J. A. (2018) · Advanced Materials · doi:10.1002/adma.201706164 · Cited by 768
Self-citationToward Perceptive Soft Robots: Progress and Challenges
Wang, H., Totaro, M., & Beccai, L. (2018) · Advanced Science · doi:10.1002/advs.201800541 · Cited by 753
Printable elastic conductors by in situ formation of silver nanoparticles from silver flakes
Matsuhisa, N., Inoue, D., Zalar, P., Jin, H., Matsuba, Y., Itoh, A., Yokota, T., Hashizume, D., & Someya, T. (2017) · Nature Materials · doi:10.1038/nmat4904 · Cited by 750
Fluid-driven origami-inspired artificial muscles
Li, S., Vogt, D. M., Rus, D., & Wood, R. J. (2017) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1713450114 · Cited by 747
Self-citationElectronic skins and machine learning for intelligent soft robots
Shih, B., Shah, D., Li, J., Thuruthel, T. G., Park, Y.-L., Iida, F., Bao, Z., Kramer-Bottiglio, R., & Tolley, M. T. (2020) · Science Robotics · doi:10.1126/scirobotics.aaz9239 · Cited by 715
A Review of 3D Printing Technologies for Soft Polymer Materials
Zhou, L., Fu, J., & He, Y. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202000187 · Cited by 713
Additive manufacturing of structural materials
Liu, G., Zhang, X., Chen, X., He, Y., Cheng, L., Huo, M., Yin, J., Hao, F., Chen, S., Wang, P., et al. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2020.100596 · Cited by 707
A light-driven artificial flytrap
Wani, O. M., Zeng, H., & Priimagi, A. (2017) · Nature Communications · doi:10.1038/ncomms15546 · Cited by 703
Direct 4D Printing Via Active Composite Materials
Ding, Z., Yuan, C., Peng, X., Wang, T., Qi, H. J., & Dunn, M. L. (2017) · Science Advances · doi:10.1126/sciadv.1602890 · Cited by 692
Hybrid 3D Printing of Soft Electronics
Valentine, A. D., Busbee, T. A., Boley, J. W., Raney, J. R., Chortos, A., Kotikian, A., Berrigan, J. D., Durstock, M. F., & Lewis, J. A. (2017) · Advanced Materials · doi:10.1002/adma.201703817 · Cited by 688
Self-citationHighly Stretchable and Tough Hydrogels below Water Freezing Temperature
Morelle, X. P., Illeperuma, W. R., Tian, K., Bai, R., Suo, Z., & Vlassak, J. J. (2018) · Advanced Materials · doi:10.1002/adma.201801541 · Cited by 647
Design, fabrication and control of origami robots
Rus, D., & Tolley, M. T. (2018) · Nature Reviews Materials · doi:10.1038/s41578-018-0009-8 · Cited by 641
Functional Fibers and Fabrics for Soft Robotics, Wearables, and Human–Robot Interface
Xiong, J., Chen, J., & Lee, P. S. (2021) · Advanced Materials · doi:10.1002/adma.202002640 · Cited by 627
Soft Manipulators and Grippers: A Review
Hughes, J., Culha, U., Giardina, F., Guenther, F., Rosendo, A., & Iida, F. (2016) · Frontiers in Robotics and AI · doi:10.3389/frobt.2016.00069 · Cited by 619
Volumetric Bioprinting of Complex Living‐Tissue Constructs within Seconds
Bernal, P. N., Delrot, P., Loterie, D., Li, Y., Malda, J., Moser, C., & Levato, R. (2019) · Advanced Materials · doi:10.1002/adma.201904209 · Cited by 604
Soft Somatosensitive Actuators via Embedded 3D Printing
Truby, R. L., Wehner, M., Grosskopf, A. K., Vogt, D. M., Uzel, S. G. M., Wood, R. J., & Lewis, J. A. (2018) · Advanced Materials · doi:10.1002/adma.201706383 · Cited by 586
Self-citationBistable and Multistable Actuators for Soft Robots: Structures, Materials, and Functionalities
Chi, Y., Li, Y., Zhao, Y., Hong, Y., Tang, Y., & Yin, J. (2022) · Advanced Materials · doi:10.1002/adma.202110384 · Cited by 584
Materials and structural designs of stretchable conductors
Matsuhisa, N., Chen, X., Bao, Z., & Someya, T. (2019) · Chemical Society Reviews · doi:10.1039/c8cs00814k · Cited by 566
3D printing of polymer composites: Materials, processes, and applications
Park, S., Shou, W., Makatura, L., Matusik, W., & Fu, K. (. (2022) · Matter · doi:10.1016/j.matt.2021.10.018 · Cited by 562
Kellaris, N., Gopaluni Venkata, V., Smith, G. M., Mitchell, S. K., & Keplinger, C. (2018) · Science Robotics · doi:10.1126/scirobotics.aar3276 · Cited by 554
Ji, X., Liu, X., Cacucciolo, V., Imboden, M., Civet, Y., El Haitami, A., Cantin, S., Perriard, Y., & Shea, H. (2019) · Science Robotics · doi:10.1126/scirobotics.aaz6451 · Cited by 545
A soft, bistable valve for autonomous control of soft actuators
Rothemund, P., Ainla, A., Belding, L., Preston, D. J., Kurihara, S., Suo, Z., & Whitesides, G. M. (2018) · Science Robotics · doi:10.1126/scirobotics.aar7986 · Cited by 543
Self-citationSoft Robotics in Minimally Invasive Surgery
Runciman, M., Darzi, A., & Mylonas, G. P. (2019) · Soft Robotics · doi:10.1089/soro.2018.0136 · Cited by 540
Yang, Y., Song, X., Li, X., Chen, Z., Zhou, C., Zhou, Q., & Chen, Y. (2018) · Advanced Materials · doi:10.1002/adma.201706539 · Cited by 538
Polymeric composites for powder-based additive manufacturing: Materials and applications
Yuan, S., Shen, F., Chua, C. K., & Zhou, K. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.11.001 · Cited by 525
Fast‐Response, Stiffness‐Tunable Soft Actuator by Hybrid Multimaterial 3D Printing
Zhang, Y., Zhang, N., Hingorani, H., Ding, N., Wang, D., Yuan, C., Zhang, B., Gu, G., & Ge, Q. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201806698 · Cited by 513
Jin, B., Song, H., Jiang, R., Song, J., Zhao, Q., & Xie, T. (2018) · Science Advances · doi:10.1126/sciadv.aao3865 · Cited by 497
Untethered soft robotic matter with passive control of shape morphing and propulsion
Kotikian, A., McMahan, C., Davidson, E. C., Muhammad, J. M., Weeks, R. D., Daraio, C., & Lewis, J. A. (2019) · Science Robotics · doi:10.1126/scirobotics.aax7044 · Cited by 476
Self-citationInstant tough bonding of hydrogels for soft machines and electronics
Wirthl, D., Pichler, R., Drack, M., Kettlguber, G., Moser, R., Gerstmayr, R., Hartmann, F., Bradt, E., Kaltseis, R., Siket, C. M., et al. (2017) · Science Advances · doi:10.1126/sciadv.1700053 · Cited by 471
Elastic Inflatable Actuators for Soft Robotic Applications
Gorissen, B., Reynaerts, D., Konishi, S., Yoshida, K., Kim, J., & De Volder, M. (2017) · Advanced Materials · doi:10.1002/adma.201604977 · Cited by 462
Recyclable 3D printing of vitrimer epoxy
Shi, Q., Yu, K., Kuang, X., Mu, X., Dunn, C. K., Dunn, M. L., Wang, T., & Jerry Qi, H. (2017) · Materials Horizons · doi:10.1039/c7mh00043j · Cited by 460
Li, N., Wang, Q., Shen, C., Wei, Z., Yu, H., Zhao, J., Lu, X., Wang, G., He, C., Xie, L., et al. (2020) · Nature Electronics · doi:10.1038/s41928-020-00475-8 · Cited by 452
Stretchable pumps for soft machines
Cacucciolo, V., Shintake, J., Kuwajima, Y., Maeda, S., Floreano, D., & Shea, H. (2019) · Nature · doi:10.1038/s41586-019-1479-6 · Cited by 447
Soft Ultrathin Electronics Innervated Adaptive Fully Soft Robots
Wang, C., Sim, K., Chen, J., Kim, H., Rao, Z., Li, Y., Chen, W., Song, J., Verduzco, R., & Yu, C. (2018) · Advanced Materials · doi:10.1002/adma.201706695 · Cited by 436
Smart Materials for Microrobots
Soto, F., Karshalev, E., Zhang, F., Esteban Fernandez de Avila, B., Nourhani, A., & Wang, J. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00999 · Cited by 433
Electronics-free pneumatic circuits for controlling soft-legged robots
Drotman, D., Jadhav, S., Sharp, D., Chan, C., & Tolley, M. T. (2021) · Science Robotics · doi:10.1126/scirobotics.aay2627 · Cited by 430
3D printing for soft robotics – a review
Gul, J. Z., Sajid, M., Rehman, M. M., Siddiqui, G. U., Shah, I., Kim, K.-H., Lee, J.-W., & Choi, K. H. (2018) · Science and Technology of Advanced Materials · doi:10.1080/14686996.2018.1431862 · Cited by 428
Harnessing bistability for directional propulsion of soft, untethered robots
Chen, T., Bilal, O. R., Shea, K., & Daraio, C. (2018) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1800386115 · Cited by 427
Comparing Microfluidic Performance of Three-Dimensional (3D) Printing Platforms
Macdonald, N. P., Cabot, J. M., Smejkal, P., Guijt, R. M., Paull, B., & Breadmore, M. C. (2017) · Analytical Chemistry · doi:10.1021/acs.analchem.7b00136 · Cited by 425
Shape-shifting structured lattices via multimaterial 4D printing
Boley, J. W., van Rees, W. M., Lissandrello, C., Horenstein, M. N., Truby, R. L., Kotikian, A., Lewis, J. A., & Mahadevan, L. (2019) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1908806116 · Cited by 420
Self-citationXavier, M. S., Tawk, C. D., Zolfagharian, A., Pinskier, J., Howard, D., Young, T., Lai, J., Harrison, S. M., Yong, Y. K., Bodaghi, M., et al. (2022) · IEEE Access · doi:10.1109/access.2022.3179589 · Cited by 418
Design of compliant mechanisms using continuum topology optimization: A review
Zhu, B., Zhang, X., Zhang, H., Liang, J., Zang, H., Li, H., & Wang, R. (2020) · Mechanism and Machine Theory · doi:10.1016/j.mechmachtheory.2019.103622 · Cited by 417
Bioinspired Polymer Systems with Stimuli-Responsive Mechanical Properties
Montero de Espinosa, L., Meesorn, W., Moatsou, D., & Weder, C. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.7b00168 · Cited by 415
Digital light processing 3D printing of conductive complex structures
Mu, Q., Wang, L., Dunn, C. K., Kuang, X., Duan, F., Zhang, Z., Qi, H. J., & Wang, T. (2017) · Additive Manufacturing · doi:10.1016/j.addma.2017.08.011 · Cited by 411
Extrusion 3D Printing of Polymeric Materials with Advanced Properties
Jiang, Z., Diggle, B., Tan, M. L., Viktorova, J., Bennett, C. W., & Connal, L. A. (2020) · Advanced Science · doi:10.1002/advs.202001379 · Cited by 408
Bio-inspired soft robotics: Material selection, actuation, and design
Coyle, S., Majidi, C., LeDuc, P., & Hsia, K. J. (2018) · Extreme Mechanics Letters · doi:10.1016/j.eml.2018.05.003 · Cited by 400
Reprocessable thermosets for sustainable three-dimensional printing
Zhang, B., Kowsari, K., Serjouei, A., Dunn, M. L., & Ge, Q. (2018) · Nature Communications · doi:10.1038/s41467-018-04292-8 · Cited by 398
Molecularly-engineered, 4D-printed liquid crystal elastomer actuators
Saed, M. O., Ambulo, C. P., Kim, H., De, R., Raval, V., Searles, K., Siddiqui, D. A., Cue, J. M. O., Stefan, M. C., Shankar, M. R., et al. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201806412 · Cited by 383
A New 3D Printing Strategy by Harnessing Deformation, Instability, and Fracture of Viscoelastic Inks
Yuk, H., & Zhao, X. (2018) · Advanced Materials · doi:10.1002/adma.201704028 · Cited by 381
Additive manufacturing of medical instruments: A state-of-the-art review
Culmone, C., Smit, G., & Breedveld, P. (2019) · Additive Manufacturing · doi:10.1016/j.addma.2019.03.015 · Cited by 371
Cao, X., Xiong, Y., Sun, J., Zhu, X., Sun, Q., & Wang, Z. L. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202102983 · Cited by 360
Soft‐Matter Engineering for Soft Robotics
Majidi, C. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201800477 · Cited by 358
Zhu, C., Chortos, A., Wang, Y., Pfattner, R., Lei, T., Hinckley, A. C., Pochorovski, I., Yan, X., To, J. W.-F., Oh, J. Y., et al. (2018) · Nature Electronics · doi:10.1038/s41928-018-0041-0 · Cited by 356
3D-printing and advanced manufacturing for electronics
Espera, A. H., Dizon, J. R. C., Chen, Q., & Advincula, R. C. (2019) · Progress in Additive Manufacturing · doi:10.1007/s40964-019-00077-7 · Cited by 356
3D Printing Materials for Soft Robotics
Sachyani Keneth, E., Kamyshny, A., Totaro, M., Beccai, L., & Magdassi, S. (2021) · Advanced Materials · doi:10.1002/adma.202003387 · Cited by 356
Review of Flexible Temperature Sensing Networks for Wearable Physiological Monitoring
Li, Q., Zhang, L., Tao, X., & Ding, X. (2017) · Advanced Healthcare Materials · doi:10.1002/adhm.201601371 · Cited by 354
Dong, Y., Wang, L., Xia, N., Yang, Z., Zhang, C., Pan, C., Jin, D., Zhang, J., Majidi, C., & Zhang, L. (2022) · Science Advances · doi:10.1126/sciadv.abn8932 · Cited by 348
Lai, Y., Deng, J., Liu, R., Hsiao, Y., Zhang, S. L., Peng, W., Wu, H., Wang, X., & Wang, Z. L. (2018) · Advanced Materials · doi:10.1002/adma.201801114 · Cited by 347
3D printing technologies: techniques, materials, and post-processing
Karakurt, I., & Lin, L. (2020) · Current Opinion in Chemical Engineering · doi:10.1016/j.coche.2020.04.001 · Cited by 346
Multimaterial actinic spatial control 3D and 4D printing
Schwartz, J. J., & Boydston, A. J. (2019) · Nature Communications · doi:10.1038/s41467-019-08639-7 · Cited by 343
Recent Developments for Flexible Pressure Sensors: A Review
Xu, F., Li, X., Shi, Y., Li, L., Wang, W., He, L., & Liu, R. (2018) · Micromachines · doi:10.3390/mi9110580 · Cited by 341
Liu, T., Liu, M., Dou, S., Sun, J., Cong, Z., Jiang, C., Du, C., Pu, X., Hu, W., & Wang, Z. L. (2018) · ACS Nano · doi:10.1021/acsnano.8b00108 · Cited by 338
McCracken, J. M., Donovan, B. R., & White, T. J. (2020) · Advanced Materials · doi:10.1002/adma.201906564 · Cited by 333
Polymer Design for 3D Printing Elastomers: Recent Advances in Structure, Properties, and Printing
Herzberger, J., Sirrine, J. M., Williams, C. B., & Long, T. E. (2019) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2019.101144 · Cited by 329
Direct ink writing advances in multi-material structures for a sustainable future
Rocha, V. G., Saiz, E., Tirichenko, I. S., & García-Tuñón, E. (2020) · Journal of Materials Chemistry A · doi:10.1039/d0ta04181e · Cited by 327
Han, Z., Wang, P., Lu, Y., Jia, Z., Qu, S., & Yang, W. (2022) · Science Advances · doi:10.1126/sciadv.abl5066 · Cited by 322
Particle robotics based on statistical mechanics of loosely coupled components
Li, S., Batra, R., Brown, D., Chang, H.-D., Ranganathan, N., Hoberman, C., Rus, D., & Lipson, H. (2019) · Nature · doi:10.1038/s41586-019-1022-9 · Cited by 320
Liquid crystal elastomers: an introduction and review of emerging technologies
Ula, S. W., Traugutt, N. A., Volpe, R. H., Patel, R. R., Yu, K., & Yakacki, C. M. (2018) · Liquid Crystals Reviews · doi:10.1080/21680396.2018.1530155 · Cited by 316
Finite Element Modeling of Soft Fluidic Actuators: Overview and Recent Developments
Xavier, M. S., Fleming, A. J., & Yong, Y. K. (2021) · Advanced Intelligent Systems · doi:10.1002/aisy.202000187 · Cited by 313
Digital logic for soft devices
Preston, D. J., Rothemund, P., Jiang, H. J., Nemitz, M. P., Rawson, J., Suo, Z., & Whitesides, G. M. (2019) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1820672116 · Cited by 312
Self-citationPrintable Smart Materials and Devices: Strategies and Applications
Su, M., & Song, Y. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00303 · Cited by 312
Physical intelligence as a new paradigm
Sitti, M. (2021) · Extreme Mechanics Letters · doi:10.1016/j.eml.2021.101340 · Cited by 311
Fundamentals of soft robot locomotion
Calisti, M., Picardi, G., & Laschi, C. (2017) · Journal of The Royal Society Interface · doi:10.1098/rsif.2017.0101 · Cited by 309
A biorobotic adhesive disc for underwater hitchhiking inspired by the remora suckerfish
Wang, Y., Yang, X., Chen, Y., Wainwright, D. K., Kenaley, C. P., Gong, Z., Liu, Z., Liu, H., Guan, J., Wang, T., et al. (2017) · Science Robotics · doi:10.1126/scirobotics.aan8072 · Cited by 308
Self-citationInnervated, Self‐Sensing Liquid Crystal Elastomer Actuators with Closed Loop Control
Kotikian, A., Morales, J. M., Lu, A., Mueller, J., Davidson, Z. S., Boley, J. W., & Lewis, J. A. (2021) · Advanced Materials · doi:10.1002/adma.202101814 · Cited by 305
Self-citation
Metadata
- Authors
- Wehner, M., Truby, R. L., Fitzgerald, D. J., Mosadegh, B., Whitesides, G. M., Lewis, J. A., & Wood, R. J.
- Venue
- Nature
- Published
- 2016-08
- Volume
- 536
- Issue
- 7617
- Pages
- 451-455
- ISSN
- 0028-0836 (ISSN-L)
- 1476-4687
- OpenAlex
- W2515930553
- Cited by
- 2,127
- References
- 31
- FWCI
- 82.53
- Type
- journal article
- Language
- en
- Open access
- green
- Licence
- www.springer.com/tdm (tdm)
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.