Processing bulk natural wood into a high-performance structural material
The DOI matches its Crossref record; 30 of the 30 references it cites were found in a registry or an index.
Abstract
Synthetic structural materials with exceptional mechanical performance suffer from either large weight and adverse environmental impact (for example, steels and alloys) or complex manufacturing processes and thus high cost (for example, polymer-based and biomimetic composites). Natural wood is a low-cost and abundant material and has been used for millennia as a structural material for building and furniture construction. However, the mechanical performance of natural wood (its strength and toughness) is unsatisfactory for many advanced engineering structures and applications. Pre-treatment with steam, heat, ammonia or cold rolling followed by densification has led to the enhanced mechanical performance of natural wood. However, the existing methods result in incomplete densification and lack dimensional stability, particularly in response to humid environments, and wood treated in these ways can expand and weaken. Here we report a simple and effective strategy to transform bulk natural wood directly into a high-performance structural material with a more than tenfold increase in strength, toughness and ballistic resistance and with greater dimensional stability. Our two-step process involves the partial removal of lignin and hemicellulose from the natural wood via a boiling process in an aqueous mixture of NaOH and Na 2 SO 3 followed by hot-pressing, leading to the total collapse of cell walls and the complete densification of the natural wood with highly aligned cellulose n…
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“new wood-based products such as cross-laminated timber and acetylated wood 87 -which are aimed at new markets-also have potential.”
From The technological and economic prospects for CO2 utilization and removal (2019) · cites this paper as [87]
In the citing paper
“The application of wood nanotechnology for producing bioinspired functional materials, with a particular emphasis on novel nanotechnological approaches for developing new wood-based materials, has been developed for sustainable use in various production systems.276,278,279”
From Technologies and perspectives for achieving carbon neutrality (2021) · cites this paper as [278]
Citations
Cites
The conflicts between strength and toughness
Ritchie, R. O. (2011) · Nature Materials · doi:10.1038/nmat3115 · Cited by 3,989
High tensile ductility in a nanostructured metal
Wang, Y., Chen, M., Zhou, F., & Ma, E. (2002) · Nature · doi:10.1038/nature01133 · Cited by 2,945
Recent developments in advanced aircraft aluminium alloys
Dursun, T., & Soutis, C. (2014) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2013.12.002 · Cited by 2,807
Nature’s hierarchical materials
Fratzl, P., & Weinkamer, R. (2007) · Progress in Materials Science · doi:10.1016/j.pmatsci.2007.06.001 · Cited by 2,800
A review on the tensile properties of natural fiber reinforced polymer composites
Ku, H., Wang, H., Pattarachaiyakoop, N., & Trada, M. (2011) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2011.01.010 · Cited by 2,280
Materials become insensitive to flaws at nanoscale: Lessons from nature
Gao, H., Ji, B., Jäger, I. L., Arzt, E., & Fratzl, P. (2003) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0631609100 · Cited by 1,922
Ultrastrong and Stiff Layered Polymer Nanocomposites
Podsiadlo, P., Kaushik, A. K., Arruda, E. M., Waas, A. M., Shim, B. S., Xu, J., Nandivada, H., Pumplin, B. G., Lahann, J., Ramamoorthy, A., et al. (2007) · Science · doi:10.1126/science.1143176 · Cited by 1,630
Structural Biological Materials: Critical Mechanics-Materials Connections
Meyers, M. A., McKittrick, J., & Chen, P.-Y. (2013) · Science · doi:10.1126/science.1220854 · Cited by 1,171
Brittle intermetallic compound makes ultrastrong low-density steel with large ductility
Kim, S.-H., Kim, H., & Kim, N. J. (2015) · Nature · doi:10.1038/nature14144 · Cited by 830
Microstructures and Mechanical Properties of High‐Strength Fe‐Mn‐Al‐C Light‐Weight TRIPLEX Steels
Frommeyer, G., & Brüx, U. (2006) · steel research international · doi:10.1002/srin.200606440 · Cited by 660
Zhu, Y. T., & Liao, X. (2004) · Nature Materials · doi:10.1038/nmat1141 · Cited by 548
Layered nanocomposites inspired by the structure and mechanical properties of nacre
Wang, J., Cheng, Q., & Tang, Z. (2012) · Chem. Soc. Rev. · doi:10.1039/c1cs15106a · Cited by 539
Anomalous scaling law of strength and toughness of cellulose nanopaper
Zhu, H., Zhu, S., Jia, Z., Parvinian, S., Li, Y., Vaaland, O., Hu, L., & Li, T. (2015) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1502870112 · Cited by 424
Self-citationLi, Y., & Shimizu, H. (2009) · European Polymer Journal · doi:10.1016/j.eurpolymj.2008.12.010 · Cited by 270
Self-citationDensification of wood veneers by compression combined with heat and steam
Fang, C.-H., Mariotti, N., Cloutier, A., Koubaa, A., & Blanchet, P. (2012) · European Journal of Wood and Wood Products · doi:10.1007/s00107-011-0524-4 · Cited by 222
Wood and Cellulosic Chemistry, Revised, and Expanded
Hon, D. N. S., & Shiraishi, N. (2000) · CRC Press eBooks · doi:10.1201/9781482269741 · Cited by 222
Combined Densification and Thermo-Hydro-Mechanical Processing of Wood
Navi, P., & Heger, F. (2004) · MRS Bulletin · doi:10.1557/mrs2004.100 · Cited by 191
The water vapour sorption properties of thermally modified and densified wood
Hill, C. A. S., Ramsay, J., Keating, B., Laine, K., Rautkari, L., Hughes, M., & Constant, B. (2012) · Journal of Materials Science · doi:10.1007/s10853-011-6154-8 · Cited by 167
Wood densification and thermal modification: hardness, set-recovery and micromorphology
Laine, K., Segerholm, K., Wålinder, M. E. P., Rautkari, L., & Hughes, M. (2016) · Wood Science and Technology · doi:10.1007/s00226-016-0835-z · Cited by 158
Properties of plywood manufactured from compressed veneer as building material
Bekhta, P., Hızıroǧlu, S., & Shepelyuk, O. (2008) · Materials & Design (1980-2015) · doi:10.1016/j.matdes.2008.07.001 · Cited by 139
Interactive effect of surface densification and post-heat-treatment on aspen wood
Gong, M., Lamason, C., & Li, L. (2009) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2009.09.013 · Cited by 121
Kim, K. H., & Jo, W. H. (2008) · Carbon · doi:10.1016/j.carbon.2008.12.043 · Cited by 101
Militzer, M. (2002) · Science · doi:10.1126/science.1078210 · Cited by 86
Kutnar, A., & Kamke, F. A. (2010) · Wood Science and Technology · doi:10.1007/s00226-010-0380-0 · Cited by 72
The effect of cooling rate on the cyclic deformation of β-annealed Ti–6Al–4V
Gil, F. J., Manero, J. M., Ginebra, M., & Planell, J. A. (2003) · Materials Science and Engineering A · doi:10.1016/s0921-5093(02)00784-0 · Cited by 70
Pařil, P., Brabec, M., Maňák, O., Rousek, R., Rademacher, P., Čermák, P., & Dejmal, A. (2014) · European Journal of Wood and Wood Products · doi:10.1007/s00107-014-0814-8 · Cited by 66
Laine, K., Belt, T., Rautkari, L., Ramsay, J., Hill, C. A. S., & Hughes, M. (2013) · Journal of Materials Science · doi:10.1007/s10853-013-7671-4 · Cited by 57
Structure and Properties Relationships of Densified Wood
Kultikova, E. V. (1999) · VTechWorks (Virginia Tech) · Cited by 53
Mechanical properties of laminated modified wood
Erickson, E. C. O. (1965) · Madison, Wis. : U.S. Dept. of Agriculture, Forest Service, Forest Products Laboratory eBooks · Cited by 12
Improving wood strength and stiffness through viscoelastic thermal compression
O’Connor, J. P. (2007) · Cited by 6
Cited by
The technological and economic prospects for CO2 utilization and removal
Hepburn, C., Adlen, E., Beddington, J., Carter, E. A., Fuss, S., Mac Dowell, N., Minx, J. C., Smith, P., & Williams, C. K. (2019) · Nature · doi:10.1038/s41586-019-1681-6 · Cited by 2,523
Developing fibrillated cellulose as a sustainable technological material
Li, T., Chen, C., Brozena, A. H., Zhu, J. Y., Xu, L., Driemeier, C., Dai, J., Rojas, O. J., Isogai, A., Wågberg, L., et al. (2021) · Nature · doi:10.1038/s41586-020-03167-7 · Cited by 1,674
Self-citationChallenges and Opportunities for Solar Evaporation
Chen, C., Kuang, Y., & Hu, L. (2019) · Joule · doi:10.1016/j.joule.2018.12.023 · Cited by 1,518
Self-citationTechnologies and perspectives for achieving carbon neutrality
Wang, F., Harindintwali, J. D., Yuan, Z., Wang, M., Wang, F., Li, S., Yin, Z., Huang, L., Fu, Y., Li, L., et al. (2021) · The Innovation · doi:10.1016/j.xinn.2021.100180 · Cited by 1,330
“The application of wood nanotechnology for producing bioinspired functional materials, with a particular emphasis on novel nanotechnological approaches for developing new wood-based materials, has been developed for sustainable use in various production systems.(276,278,279) These advances in the development of a circ…”
BackgroundStructure–property–function relationships of natural and engineered wood
Chen, C., Kuang, Y., Zhu, S., Burgert, I., Keplinger, T., Gong, A., Li, T., Berglund, L., Eichhorn, S. J., & Hu, L. (2020) · Nature Reviews Materials · doi:10.1038/s41578-020-0195-z · Cited by 1,295
Self-citation
Metadata
- Authors
- Song, J., Chen, C., Zhu, S., Zhu, M., Dai, J., Ray, U., Li, Y., Kuang, Y., Li, Y., Quispe, N., Yao, Y., Gong, A., Leiste, U. H., Bruck, H. A., Zhu, J. Y., Vellore, A., Li, H., Minus, M. L., Jia, Z., Martini, A., Li, T., & Hu, L.
- Affiliations
- University of Maryland, College Park (US)
- Forest Products Laboratory (US)
- University of California, Merced (US)
- Northeastern University (US)
- Corresponding author
- Li, Teng
- Hu, Liangbing
- ORCID
- Venue
- Nature
- Published
- 2018-02
- Volume
- 554
- Issue
- 7691
- Pages
- 224-228
- ISSN
- 0028-0836 (ISSN-L)
- 1476-4687
- OpenAlex
- W2787189653
- Semantic Scholar
- ebb83681967d065b6b47d483607fc793a03d5a10
- Cited by
- 1,632
- References
- 30
- Citations by year
- 2026: 212 · 2025: 211 · 2024: 253 · 2023: 240 · 2022: 217 · 2021: 156 · 2020: 173 · 2019: 122 · 2018: 48
- FWCI
- 99.90
- Type
- journal article
- Language
- en
- Open access
- closed
- Licence
- www.springer.com/tdm (tdm)
- Locations
- Nature (publishedVersion)
- PubMed (publishedVersion)
- RePEc: Research Papers in Economics (submittedVersion)
- Funders
- China Scholarship Council
- Topics
- Physical Sciences › Engineering › Building and Construction › Wood Treatment and Properties
- Physical Sciences › Chemical Engineering › Process Chemistry and Technology › Lignin and Wood Chemistry
- Physical Sciences › Materials Science › Polymers and Plastics › Natural Fiber Reinforced Composites
- Keywords
- wood densification, lignin removal, hemicellulose removal, hot pressing, cellulose nanofibers, mechanical strength, toughness, ballistic resistance, dimensional stability, wood lignin
- MeSH terms
- Alloys, Cell Wall, Cellulose, Hot Temperature, Lignin, Metals, Molecular Weight, Polysaccharides, Sodium Hydroxide, Sulfites, Tensile Strength, Wood
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.