The DOI matches its Crossref record; 33 of the 33 references it cites were found in a registry or an index.
Gas–solid interfacial modification of oxygen activity in layered oxide cathodes for lithium-ion batteries
Open accessAbstract
Lattice oxygen can play an intriguing role in electrochemical processes, not only maintaining structural stability, but also influencing electron and ion transport properties in high-capacity oxide cathode materials for Li-ion batteries. Here, we report the design of a gas–solid interface reaction to achieve delicate control of oxygen activity through uniformly creating oxygen vacancies without affecting structural integrity of Li-rich layered oxides. Theoretical calculations and experimental characterizations demonstrate that oxygen vacancies provide a favourable ionic diffusion environment in the bulk and significantly suppress gas release from the surface. The target material is achievable in delivering a discharge capacity as high as 301 mAh g−1 with initial Coulombic efficiency of 93.2%. After 100 cycles, a reversible capacity of 300 mAh g−1 still remains without any obvious decay in voltage. This study sheds light on the comprehensive design and control of oxygen activity in transition-metal-oxide systems for next-generation Li-ion batteries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set
Kresse, G., & Furthmüller, J. (1996) · Physical Review B · doi:10.1103/physrevb.54.11169 · Cited by 123,652
From ultrasoft pseudopotentials to the projector augmented-wave method
Kresse, G., & Joubert, D. (1999) · Physical Review B · doi:10.1103/physrevb.59.1758 · Cited by 85,307
Kresse, G., & Furthmüller, J. (1996) · Computational Materials Science · doi:10.1016/0927-0256(96)00008-0 · Cited by 75,638
Kresse, G., & Hafner, J. (1994) · Physical Review B · doi:10.1103/physrevb.49.14251 · Cited by 23,019
EXPGUI, a graphical user interface for GSAS
Toby, B. H. (2001) · Journal of Applied Crystallography · doi:10.1107/s0021889801002242 · Cited by 9,247
Generalized gradient approximation for the exchange-correlation hole of a many-electron system
Perdew, J. P., Burke, K., & Wang, Y. (1996) · Physical Review B · doi:10.1103/physrevb.54.16533 · Cited by 6,861
Electrodes with High Power and High Capacity for Rechargeable Lithium Batteries
Kang, K., Meng, Y. S., Bréger, J., Grey, C. P., & Ceder, G. (2006) · Science · doi:10.1126/science.1122152 · Cited by 2,638
Self-citationFactors Governing Oxygen Reduction in Solid Oxide Fuel Cell Cathodes
Adler, S. B. (2004) · Chemical Reviews · doi:10.1021/cr020724o · Cited by 2,316
Li2MnO3-stabilized LiMO2 (M = Mn, Ni, Co) electrodes for lithium-ion batteries
Thackeray, M. M., Kang, S.-H., Johnson, C. S., Vaughey, J. T., Benedek, R., & Hackney, S. A. (2007) · Journal of Materials Chemistry · doi:10.1039/b702425h · Cited by 2,039
Armstrong, A. R., Holzapfel, M., Novák, P., Johnson, C. S., Kang, S.-H., Thackeray, M. M., & Bruce, P. G. (2006) · Journal of the American Chemical Society · doi:10.1021/ja062027+ · Cited by 1,588
Cited by
Performance and cost of materials for lithium-based rechargeable automotive batteries
Schmuch, R., Wagner, R., Hörpel, G., Placke, T., & Winter, M. (2018) · Nature Energy · doi:10.1038/s41560-018-0107-2 · Cited by 3,233
The development and future of lithium ion batteries
Blomgren, G. E. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0251701jes · Cited by 1,940
Fundamental understanding and practical challenges of anionic redox activity in Li-ion batteries
Assat, G., & Tarascon, J.-M. (2018) · Nature Energy · doi:10.1038/s41560-018-0097-0 · Cited by 1,588
High-voltage positive electrode materials for lithium-ion batteries
Li, W., Song, B., & Manthiram, A. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00875e · Cited by 1,339
Liu, Q., Su, X., Lei, D., Qin, Y., Wen, J., Guo, F., Wu, Y. A., Rong, Y., Kou, R., Xiao, X., et al. (2018) · Nature Energy · doi:10.1038/s41560-018-0180-6 · Cited by 815
Voltage issue of aqueous rechargeable metal-ion batteries
Liu, Z., Huang, Y., Huang, Y., Yang, Q., Li, X., Huang, Z., & Zhi, C. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00131j · Cited by 783
Self-citationSchipper, F., Erickson, E. M., Erk, C., Shin, J.-Y., Chesneau, F. F., & Aurbach, D. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0351701jes · Cited by 762
Gent, W. E., Lim, K., Liang, Y., Li, Q., Barnes, T., Ahn, S.-J., Stone, K. H., McIntire, M., Hong, J., Song, J. H., et al. (2017) · Nature Communications · doi:10.1038/s41467-017-02041-x · Cited by 695
He, W., Guo, W., Wu, H., Lin, L., Liu, Q., Han, X., Xie, Q., Liu, P., Zheng, H., Wang, L., et al. (2021) · Advanced Materials · doi:10.1002/adma.202005937 · Cited by 626
House, R. A., Rees, G. J., Pérez-Osorio, M. A., Marie, J.-J., Boivin, E., Robertson, A. W., Nag, A., Garcia-Fernandez, M., Zhou, K.-J., & Bruce, P. G. (2020) · Nature Energy · doi:10.1038/s41560-020-00697-2 · Cited by 558
Oxygen Release Degradation in Li‐Ion Battery Cathode Materials: Mechanisms and Mitigating Approaches
Sharifi‐Asl, S., Lu, J., Amine, K., & Shahbazian‐Yassar, R. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201900551 · Cited by 532
Injection of oxygen vacancies in the bulk lattice of layered cathodes
Yan, P., Zheng, J., Tang, Z.-K., Devaraj, A., Chen, G., Amine, K., Zhang, J.-G., Liu, L.-M., & Wang, C. (2019) · Nature Nanotechnology · doi:10.1038/s41565-019-0428-8 · Cited by 520
Li‐ and Mn‐Rich Cathode Materials: Challenges to Commercialization
Zheng, J., Myeong, S., Cho, W., Yan, P., Xiao, J., Wang, C., Cho, J., & Zhang, J. (2017) · Advanced Energy Materials · doi:10.1002/aenm.201601284 · Cited by 513
State-of-the-art characterization techniques for advanced lithium-ion batteries
Lu, J., Wu, T., & Amine, K. (2017) · Nature Energy · doi:10.1038/nenergy.2017.11 · Cited by 492
Sodium transition metal oxides: the preferred cathode choice for future sodium-ion batteries?
Liu, Q., Hu, Z., Li, W., Zou, C., Jin, H., Wang, S., Chou, S., & Dou, S.-X. (2021) · Energy & Environmental Science · doi:10.1039/d0ee02997a · Cited by 468
Zuo, W., Luo, M., Liu, X., Wu, J., Liu, H., Li, J., Winter, M., Fu, R., Yang, W., & Yang, Y. (2020) · Energy & Environmental Science · doi:10.1039/d0ee01694b · Cited by 429
Self-citationSinger, A., Zhang, M., Hy, S., Cela, D., Fang, C., Wynn, T. A., Qiu, B., Xia, Y., Liu, Z., Ulvestad, A., et al. (2018) · Nature Energy · doi:10.1038/s41560-018-0184-2 · Cited by 423
Self-citationHigh‐Capacity Cathode Material with High Voltage for Li‐Ion Batteries
Shi, J., Xiao, D., Ge, M., Yu, X., Chu, Y., Huang, X., Zhang, X., Yin, Y., Yang, X., Guo, Y., et al. (2018) · Advanced Materials · doi:10.1002/adma.201705575 · Cited by 415
Shi, Y., Zhang, M., Meng, Y. S., & Chen, Z. (2019) · Advanced Energy Materials · doi:10.1002/aenm.201900454 · Cited by 402
Self-citationToward Green Battery Cells: Perspective on Materials and Technologies
Dühnen, S., Betz, J., Kolek, M., Schmuch, R., Winter, M., & Placke, T. (2020) · Small Methods · doi:10.1002/smtd.202000039 · Cited by 395
Gradient Li-rich oxide cathode particles immunized against oxygen release by a molten salt treatment
Zhu, Z., Yu, D., Yang, Y., Su, C., Huang, Y., Dong, Y., Waluyo, I., Wang, B., Hunt, A., Yao, X., et al. (2019) · Nature Energy · doi:10.1038/s41560-019-0508-x · Cited by 371
Liu, J., Wang, J., Ni, Y., Zhang, K., Cheng, F., & Chen, J. (2021) · Materials Today · doi:10.1016/j.mattod.2020.10.028 · Cited by 349
Self-citationOxygen Release Induced Chemomechanical Breakdown of Layered Cathode Materials
Mu, L., Lin, R., Xu, R., Han, L., Xia, S., Sokaras, D., Steiner, J. D., Weng, T.-C., Nordlund, D., Doeff, M. M., et al. (2018) · Nano Letters · doi:10.1021/acs.nanolett.8b01036 · Cited by 345
Oxygen Loss in Layered Oxide Cathodes for Li-Ion Batteries: Mechanisms, Effects, and Mitigation
Zhang, H., Liu, H., Piper, L. F. J., Whittingham, M. S., & Zhou, G. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00327 · Cited by 338
Self-citationZhao, S., Guo, Z., Yan, K., Wan, S., He, F., Sun, B., & Wang, G. (2021) · Energy Storage Materials · doi:10.1016/j.ensm.2020.11.008 · Cited by 325
Research and development of advanced battery materials in China
Lu, Y., Rong, X., Hu, Y.-S., Chen, L., & Li, H. (2019) · Energy Storage Materials · doi:10.1016/j.ensm.2019.05.019 · Cited by 280
Zhang, M., Kitchaev, D. A., Lebens-Higgins, Z., Vinckeviciute, J., Zuba, M., Reeves, P. J., Grey, C. P., Whittingham, M. S., Piper, L. F. J., Van der Ven, A., et al. (2022) · Nature Reviews Materials · doi:10.1038/s41578-022-00416-1 · Cited by 264
Self-citationThe significance of mitigating crosstalk in lithium-ion batteries: a review
Song, Y., Wang, L., Sheng, L., Ren, D., Liang, H., Li, Y., Wang, A., Zhang, H., Xu, H., & He, X. (2023) · Energy & Environmental Science · doi:10.1039/d3ee00441d · Cited by 255
Metadata
- Authors
- Qiu, B., Zhang, M., Wu, L., Wang, J., Xia, Y., Qian, D., Liu, H., Hy, S., Chen, Y., An, K., Zhu, Y., Liu, Z., & Meng, Y. S.
- Venue
- Nature Communications
- Published
- 2016-07-01
- Volume
- 7
- Issue
- 1
- Pages
- 12108-12108
- ISSN
- 2041-1723 (ISSN-L)
- OpenAlex
- W2466722978
- Cited by
- 734
- References
- 33
- FWCI
- 27.90
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.