The DOI matches its Crossref record; 33 of the 33 references it cites were found in a registry or an index.
Gas–solid interfacial modification of oxygen activity in layered oxide cathodes for lithium-ion batteries
Open accessAbstract
Lattice oxygen can play an intriguing role in electrochemical processes, not only maintaining structural stability, but also influencing electron and ion transport properties in high-capacity oxide cathode materials for Li-ion batteries. Here, we report the design of a gas–solid interface reaction to achieve delicate control of oxygen activity through uniformly creating oxygen vacancies without affecting structural integrity of Li-rich layered oxides. Theoretical calculations and experimental characterizations demonstrate that oxygen vacancies provide a favourable ionic diffusion environment in the bulk and significantly suppress gas release from the surface. The target material is achievable in delivering a discharge capacity as high as 301 mAh g−1 with initial Coulombic efficiency of 93.2%. After 100 cycles, a reversible capacity of 300 mAh g−1 still remains without any obvious decay in voltage. This study sheds light on the comprehensive design and control of oxygen activity in transition-metal-oxide systems for next-generation Li-ion batteries.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Efficient iterative schemes for ab initio total-energy calculations using a plane-wave basis set
Kresse, G., & Furthmüller, J. (1996) · Physical Review B · doi:10.1103/physrevb.54.11169 · Cited by 123,652
From ultrasoft pseudopotentials to the projector augmented-wave method
Kresse, G., & Joubert, D. (1999) · Physical Review B · doi:10.1103/physrevb.59.1758 · Cited by 85,307
Kresse, G., & Furthmüller, J. (1996) · Computational Materials Science · doi:10.1016/0927-0256(96)00008-0 · Cited by 75,638
Kresse, G., & Hafner, J. (1994) · Physical Review B · doi:10.1103/physrevb.49.14251 · Cited by 23,019
EXPGUI, a graphical user interface for GSAS
Toby, B. H. (2001) · Journal of Applied Crystallography · doi:10.1107/s0021889801002242 · Cited by 9,247
Generalized gradient approximation for the exchange-correlation hole of a many-electron system
Perdew, J. P., Burke, K., & Wang, Y. (1996) · Physical Review B · doi:10.1103/physrevb.54.16533 · Cited by 6,861
Electrodes with High Power and High Capacity for Rechargeable Lithium Batteries
Kang, K., Meng, Y. S., Bréger, J., Grey, C. P., & Ceder, G. (2006) · Science · doi:10.1126/science.1122152 · Cited by 2,638
Self-citationFactors Governing Oxygen Reduction in Solid Oxide Fuel Cell Cathodes
Adler, S. B. (2004) · Chemical Reviews · doi:10.1021/cr020724o · Cited by 2,316
Li2MnO3-stabilized LiMO2 (M = Mn, Ni, Co) electrodes for lithium-ion batteries
Thackeray, M. M., Kang, S.-H., Johnson, C. S., Vaughey, J. T., Benedek, R., & Hackney, S. A. (2007) · Journal of Materials Chemistry · doi:10.1039/b702425h · Cited by 2,039
Armstrong, A. R., Holzapfel, M., Novák, P., Johnson, C. S., Kang, S.-H., Thackeray, M. M., & Bruce, P. G. (2006) · Journal of the American Chemical Society · doi:10.1021/ja062027+ · Cited by 1,588
Reversible anionic redox chemistry in high-capacity layered-oxide electrodes
Sathiya, M., Rousse, G., Ramesha, K., Laisa, C. P., Vezin, H., Sougrati, M. T., Doublet, M.-L., Foix, D., Gonbeau, D., Walker, W., et al. (2013) · Nature Materials · doi:10.1038/nmat3699 · Cited by 1,539
Lin, F., Markus, I. M., Nordlund, D., Weng, T.-C., Asta, M. D., Xin, H. L., & Doeff, M. M. (2014) · Nature Communications · doi:10.1038/ncomms4529 · Cited by 1,481
Yabuuchi, N., Yoshii, K., Myung, S.-T., Nakai, I., & Komaba, S. (2011) · Journal of the American Chemical Society · doi:10.1021/ja108588y · Cited by 1,188
Jung, S., Gwon, H., Hong, J., Park, K., Seo, D., Kim, H., Hyun, J., Yang, W., & Kang, K. (2014) · Advanced Energy Materials · doi:10.1002/aenm.201300787 · Cited by 1,124
Lu, Z., & Dahn, J. R. (2002) · Journal of The Electrochemical Society · doi:10.1149/1.1480014 · Cited by 1,016
Lu, Z., MacNeil, D. D., & Dahn, J. R. (2001) · Electrochemical and Solid-State Letters · doi:10.1149/1.1407994 · Cited by 941
Xu, B., Fell, C. R., Chi, M., & Meng, Y. S. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01131f · Cited by 825
Self-citationThe significance of the Li2MnO3 component in ‘composite’ xLi2MnO3·(1−x)LiMn0.5Ni0.5O2 electrodes
Johnson, C. S., Kim, J.-S., Lefief, C., Li, N., Vaughey, J. T., & Thackeray, M. M. (2004) · Electrochemistry Communications · doi:10.1016/j.elecom.2004.08.002 · Cited by 740
Sun, Y., Lee, M., Yoon, C. S., Hassoun, J., Amine, K., & Scrosati, B. (2012) · Advanced Materials · doi:10.1002/adma.201104106 · Cited by 704
Sathiya, M., Ramesha, K., Rousse, G., Foix, D., Gonbeau, D., Prakash, A. S., Doublet, M. L., Hemalatha, K., & Tarascon, J.-M. (2013) · Chemistry of Materials · doi:10.1021/cm400193m · Cited by 405
Reversible Oxygen Participation to the Redox Processes Revealed for Li1.20Mn0.54Co0.13Ni0.13O2
Koga, H., Croguennec, L., Ménétrier, M., Douhil, K., Belin, S., Bourgeois, L., Suard, E., Weill, F., & Delmas, C. (2013) · Journal of The Electrochemical Society · doi:10.1149/2.038306jes · Cited by 376
Hy, S., Liu, H., Zhang, M., Qian, D., Hwang, B.-J., & Meng, Y. S. (2016) · Energy & Environmental Science · doi:10.1039/c5ee03573b · Cited by 347
Self-citationYu, H., Ishikawa, R., So, Y., Shibata, N., Kudo, T., Zhou, H. S., & Ikuhara, Y. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201301236 · Cited by 317
Lithium manganese oxides from Li2MnO3 for rechargeable lithium battery applications
Rossouw, M., & Thackeray, M. (1991) · Materials Research Bulletin · doi:10.1016/0025-5408(91)90186-p · Cited by 277
Kraft, S., Stümpel, J., Becker, P., & Kuetgens, U. (1996) · Review of Scientific Instruments · doi:10.1063/1.1146657 · Cited by 273
Liao, P., & Carter, E. A. (2013) · Chem. Soc. Rev. · doi:10.1039/c2cs35267b · Cited by 246
Wu, Y., & Manthiram, A. (2006) · Electrochemical and Solid-State Letters · doi:10.1149/1.2180528 · Cited by 245
Liu, W., Oh, P., Liu, X., Myeong, S., Cho, W., & Cho, J. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500274 · Cited by 217
Xia, Q., Zhao, X., Xu, M., Ding, Z., Liu, J., Chen, L., Ivey, D. G., & Wei, W. (2015) · Journal of Materials Chemistry A · doi:10.1039/c4ta05848h · Cited by 158
Ambivalent Effect of Oxygen Vacancies on Li2MnO3: A First-Principles Study
Okamoto, Y. (2011) · Journal of The Electrochemical Society · doi:10.1149/2.079202jes · Cited by 114
Qiu, B., Wang, J., Xia, Y., Wei, Z., Han, S., & Liu, Z. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am501293y · Cited by 104
Self-citationZhao, J., Huang, R., Gao, W., Zuo, J., Zhang, X., Misture, S. T., Chen, Y., Lockard, J. V., Zhang, B., Guo, S., et al. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201401937 · Cited by 100
Self-citationVillevieille, C., Lanz, P., Bünzli, C., & Novák, P. (2014) · Journal of Materials Chemistry A · doi:10.1039/c3ta13112b · Cited by 24
Cited by
Performance and cost of materials for lithium-based rechargeable automotive batteries
Schmuch, R., Wagner, R., Hörpel, G., Placke, T., & Winter, M. (2018) · Nature Energy · doi:10.1038/s41560-018-0107-2 · Cited by 3,233
The development and future of lithium ion batteries
Blomgren, G. E. (2017) · Journal of The Electrochemical Society · doi:10.1149/2.0251701jes · Cited by 1,940
Fundamental understanding and practical challenges of anionic redox activity in Li-ion batteries
Assat, G., & Tarascon, J.-M. (2018) · Nature Energy · doi:10.1038/s41560-018-0097-0 · Cited by 1,588
High-voltage positive electrode materials for lithium-ion batteries
Li, W., Song, B., & Manthiram, A. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00875e · Cited by 1,339
Liu, Q., Su, X., Lei, D., Qin, Y., Wen, J., Guo, F., Wu, Y. A., Rong, Y., Kou, R., Xiao, X., et al. (2018) · Nature Energy · doi:10.1038/s41560-018-0180-6 · Cited by 815
Metadata
- Authors
- Qiu, B., Zhang, M., Wu, L., Wang, J., Xia, Y., Qian, D., Liu, H., Hy, S., Chen, Y., An, K., Zhu, Y., Liu, Z., & Meng, Y. S.
- Venue
- Nature Communications
- Published
- 2016-07-01
- Volume
- 7
- Issue
- 1
- Pages
- 12108-12108
- ISSN
- 2041-1723 (ISSN-L)
- OpenAlex
- W2466722978
- Cited by
- 734
- References
- 33
- FWCI
- 27.90
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.