In situ micropillar compression reveals superior strength and ductility but an absence of damage in lamellar bone
Open accessThe DOI matches its Crossref record; 63 of the 63 references it cites were found in a registry or an index.
Abstract
Ageing societies suffer from an increasing incidence of bone fractures. Bone strength depends on the amount of mineral measured by clinical densitometry, but also on the micromechanical properties of the hierarchical organization of bone. Here, we investigate the mechanical response under monotonic and cyclic compression of both single osteonal lamellae and macroscopic samples containing numerous osteons. Micropillar compression tests in a scanning electron microscope, microindentation and macroscopic compression tests were performed on dry ovine bone to identify the elastic modulus, yield stress, plastic deformation, damage accumulation and failure mechanisms. We found that isolated lamellae exhibit a plastic behaviour, with higher yield stress and ductility but no damage. In agreement with a proposed rheological model, these experiments illustrate a transition from a ductile mechanical behaviour of bone at the microscale to a quasi-brittle response driven by the growth of cracks along interfaces or in the vicinity of pores at the macroscale.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The cited source says what the claim attributes to it.
In the citing paper
“However, compression tests on micropillars indicate that both the strength and ductility of cortical tissue are higher at the microscale versus the macroscale (39, 40).”
From Bone Mechanical Properties in Healthy and Diseased States (2018) · cites this paper as [39]
The cited source says what the claim attributes to it.
In the citing paper
“However, compression tests on micropillars indicate that both the strength and ductility of cortical tissue are higher at the microscale versus the macroscale (39, 40).”
From Bone Mechanical Properties in Healthy and Diseased States (2018) · cites this paper as [39]
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
R: A Language and Environment for Statistical Computing
R Core Team (2025) · doi:10.32614/r.manuals · Cited by 352,181
Oliver, W. C., & Pharr, G. M. (1992) · Journal of Materials Research · doi:10.1557/jmr.1992.1564 · Cited by 26,961
An analysis of variance test for normality (complete samples)
SHAPIRO, S. S., & WILK, M. B. (1965) · Biometrika · doi:10.1093/biomet/52.3-4.591 · Cited by 23,480
VI. The phenomena of rupture and flow in solids
Griffith, A. A. (1921) · Philosophical Transactions of the Royal Society of London. Series A, Containing Papers of a Mathematical or Physical Character · doi:10.1098/rsta.1921.0006 · Cited by 11,052
The Stopping and Range of Ions in Matter
Ziegler, J. F., & Biersack, J. P. (1985) · Treatise on Heavy-Ion Science · doi:10.1007/978-1-4615-8103-1_3 · Cited by 3,984
The Stopping and Ranges of Ions in Matter
(1980) · Elsevier eBooks · doi:10.1016/c2013-0-02882-4 · Cited by 2,983
Nature’s hierarchical materials
Fratzl, P., & Weinkamer, R. (2007) · Progress in Materials Science · doi:10.1016/j.pmatsci.2007.06.001 · Cited by 2,800
Mechanical properties and the hierarchical structure of bone
Rho, J.-Y., Kuhn-Spearing, L., & Zioupos, P. (1998) · Medical Engineering & Physics · doi:10.1016/s1350-4533(98)00007-1 · Cited by 2,588
The elastic and ultimate properties of compact bone tissue
Reilly, D. T., & Burstein, A. H. (1975) · Journal of Biomechanics · doi:10.1016/0021-9290(75)90075-5 · Cited by 1,533
(2001) · CRC Press eBooks · doi:10.1201/b14263 · Cited by 1,451
Research works printed but not linked: 1
- Zysset, P. K. A Constitutive Law for Trabecular Bone PhD thesis, Ecole Polytechnique Federale de Lausanne (1994)
Cited by
Bone Mechanical Properties in Healthy and Diseased States
Morgan, E. F., Unnikrisnan, G. U., & Hussein, A. I. (2018) · Annual Review of Biomedical Engineering · doi:10.1146/annurev-bioeng-062117-121139 · Cited by 1,026
“However, compression tests on micropillars indicate that both the strength and ductility of cortical tissue are higher at the microscale versus the macroscale (39, 40).”
Structure and mechanics of interfaces in biological materials
Barthelat, F., Yin, Z., & Buehler, M. J. (2016) · Nature Reviews Materials · doi:10.1038/natrevmats.2016.7 · Cited by 765
Mirzaali, M. J., Schwiedrzik, J. J., Thaiwichai, S., Best, J. P., Michler, J., Zysset, P. K., & Wolfram, U. (2016) · Bone · doi:10.1016/j.bone.2015.11.018 · Cited by 325
“Di-328 rection was a significant factor in the ANOVA (p < 0.05) for all measurements except329 HIT confirming the anisotropy of cortical bone on the ultra-structural level (Franzoso330 and Zysset, 2009; Reisinger et al., 2011; Schwiedrzik et al., 2014; Schwiedrzik and331 Zysset, 2015).”
BackgroundMethodResultInfluentialSelf-citationThe nanocomposite nature of bone drives its strength and damage resistance
Tertuliano, O. A., & Greer, J. R. (2016) · Nature Materials · doi:10.1038/nmat4719 · Cited by 227
Strengthening and toughening mechanisms in graphene-Al nanolaminated composite micro-pillars
Feng, S., Guo, Q., Li, Z., Fan, G., Li, Z., Xiong, D.-B., Su, Y., Tan, Z., Zhang, J., & Zhang, D. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.11.043 · Cited by 205
Roadmap for focused ion beam technologies
Höflich, K., Hobler, G., Allen, F. I., Wirtz, T., Rius, G., McElwee‐White, L., Krasheninnikov, A. V., Schmidt, M., Utke, I., Klingner, N., et al. (2023) · Applied Physics Reviews · doi:10.1063/5.0162597 · Cited by 170
Self-citationLi, M., Gao, H., Liang, J., Gu, S., You, W., Shu, D., Wang, J., & Sun, B. (2018) · Materials Characterization · doi:10.1016/j.matchar.2018.04.007 · Cited by 153
Li, H.-X., Gao, S. J., Tomota, Y., Ii, S., Tsuji, N., & Ohmura, T. (2021) · Acta Materialia · doi:10.1016/j.actamat.2021.116621 · Cited by 150
A robust and reproducible procedure for cross-linking thermoset polymers using molecular simulation
Demir, B., & Walsh, T. R. (2016) · Soft Matter · doi:10.1039/c5sm02788h · Cited by 129
Post-yield and failure properties of cortical bone
Wolfram, U., & Schwiedrzik, J. J. (2016) · BoneKEy Reports · doi:10.1038/bonekey.2016.60 · Cited by 112
Self-citationOn modelling of cutting force and temperature in bone milling
Liao, Z., Axinte, D. A., & Gao, D. (2018) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2018.11.039 · Cited by 110
Grünewald, T. A., Liebi, M., Wittig, N. K., Johannes, A., Sikjær, T., Rejnmark, L., Gao, Z., Rosenthal, M., Guizar‐Sicairos, M., Birkedal, H., et al. (2020) · Science Advances · doi:10.1126/sciadv.aba4171 · Cited by 105
Size effects and shape memory properties in ZrO2 ceramic micro- and nano-pillars
Du, Z., Zeng, X. M., Liu, Q., Lai, A., Amini, S., Miserez, A., Schuh, C. A., & Gan, C. L. (2015) · Scripta Materialia · doi:10.1016/j.scriptamat.2015.01.013 · Cited by 104
The Ultrastructure of Bone and Its Relevance to Mechanical Properties
Schwarcz, H. P., Abueidda, D., & Jasiuk, I. (2017) · Frontiers in Physics · doi:10.3389/fphy.2017.00039 · Cited by 96
Yu, H., & Zhu, Y. (2024) · Chemical Society Reviews · doi:10.1039/d2cs00513a · Cited by 93
Characterization of the mechanical behavior of SU-8 at microscale by viscoelastic analysis
Xu, T., Yoo, J. H., Babu, S., Roy, S., Lee, J., & Lu, H. (2016) · Journal of Micromechanics and Microengineering · doi:10.1088/0960-1317/26/10/105001 · Cited by 91
Stadelmann, M. A., Schenk, D., Maquer, G., Lenherr, C., Buck, F. M., Bosshardt, D. D., Hoppe, S., Theumann, N. H., Alkalay, R. N., & Zysset, P. K. (2020) · Bone · doi:10.1016/j.bone.2020.115598 · Cited by 81
Self-citationTissue-Level Mechanical Properties of Bone Contributing to Fracture Risk
Nyman, J. S., Granke, M., Singleton, R. C., & Pharr, G. M. (2016) · Current Osteoporosis Reports · doi:10.1007/s11914-016-0314-3 · Cited by 81
Hennige, S., Wolfram, U., Wickes, L., Murray, F., Roberts, J. M., Kamenos, N. A., Schofield, S., Groetsch, A., Spiesz, E. M., Aubin‐Tam, M., et al. (2020) · Frontiers in Marine Science · doi:10.3389/fmars.2020.00668 · Cited by 79
Self-citationLuczynski, K. W., Steiger-Thirsfeld, A., Bernardi, J., Eberhardsteiner, J., & Hellmich, C. (2015) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2015.03.001 · Cited by 70
Nanoscale deformation mechanisms and yield properties of hydrated bone extracellular matrix
Schwiedrzik, J. J., Taylor, A. A., Casari, D., Wolfram, U., Zysset, P. K., & Michler, J. (2017) · Acta Biomaterialia · doi:10.1016/j.actbio.2017.07.030 · Cited by 73
Self-citationMachining-induced thermal damage in cortical bone: Necrosis and micro-mechanical integrity
Robles-Linares, J. A., Axinte, D. A., Liao, Z., & Gameros, A. A. (2020) · Materials & Design · doi:10.1016/j.matdes.2020.109215 · Cited by 72
Schwiedrzik, J. J., Gross, T., Bina, M., Pretterklieber, M. L., Zysset, P. K., & Pahr, D. H. (2015) · International Journal for Numerical Methods in Biomedical Engineering · doi:10.1002/cnm.2739 · Cited by 64
Self-citationMorin, C., Vass, V., & Hellmich, C. (2017) · International Journal of Plasticity · doi:10.1016/j.ijplas.2017.01.009 · Cited by 64
Microtensile properties and failure mechanisms of cortical bone at the lamellar level
Casari, D., Michler, J., Zysset, P. K., & Schwiedrzik, J. J. (2020) · Acta Biomaterialia · doi:10.1016/j.actbio.2020.04.030 · Cited by 63
Self-citationHe, Y. H., Xu, W., Zhang, H., & Qu, J. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c01528 · Cited by 62
Bone: An Outstanding Composite Material
Rosa, N., de Moura, M. F. S. F., Olhero, S. M., Simões, R., Magalhães, F. D., Marques, A. T., Ferreira, J. P. S., Reis, A. R., Carvalho, M. R., & Parente, M. (2022) · Applied Sciences · doi:10.3390/app12073381 · Cited by 61
Compositional and mechanical properties of growing cortical bone tissue: a study of the human fibula
Lefèvre, E., Farlay, D., Bala, Y., Subtil, F., Wolfram, U., Rizzo, S., Baron, C., Zysset, P. K., Pithioux, M., & Follet, H. (2019) · Scientific Reports · doi:10.1038/s41598-019-54016-1 · Cited by 56
Self-citationComputational investigation of the effect of water on the nanomechanical behavior of bone
Maghsoudi-Ganjeh, M., Wang, X., & Zeng, X. (2019) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2019.103454 · Cited by 52
Shahrin, R., & Bobko, C. P. (2019) · Cement and Concrete Research · doi:10.1016/j.cemconres.2019.105863 · Cited by 51
Finite Element-Based Mechanical Assessment of Bone Quality on the Basis of In Vivo Images
Pahr, D. H., & Zysset, P. K. (2016) · Current Osteoporosis Reports · doi:10.1007/s11914-016-0335-y · Cited by 50
Self-citationRemache, D., Semaan, M., Rossi, J.-M., Pithioux, M., & Milan, J. (2019) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2019.103426 · Cited by 49
Recent advances in nanomechanical and in situ testing techniques: Towards extreme conditions
Kiener, D., Wurmshuber, M., Alfreider, M., Schaffar, G. J. K., & Maier‐Kiener, V. (2023) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2023.101108 · Cited by 47
Levrero-Florencio, F., Margetts, L., Sales, E., Xie, S., Manda, K., & Pankaj, P. (2016) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2016.04.008 · Cited by 46
“The tensorial notation used in this study largely follows the notation used by Schwiedrzik et al. (2013).”
InfluentialBlanchard, R., Morin, C., Malandrino, A., Vella, A., Sant, Z., & Hellmich, C. (2015) · International Journal for Numerical Methods in Biomedical Engineering · doi:10.1002/cnm.2760 · Cited by 44
Thermal drift in room temperature nanoindentation experiments: Measurement and correction
Verma, S., Sarkar, P., & Pant, P. (2021) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/s43578-021-00386-0 · Cited by 44
Kochetkova, T., Peruzzi, C., Braun, O., Overbeck, J., Maurya, A. K., Neels, A., Calame, M., Michler, J., Zysset, P. K., & Schwiedrzik, J. J. (2020) · Acta Biomaterialia · doi:10.1016/j.actbio.2020.10.034 · Cited by 41
Self-citationGroetsch, A., Gourrier, A., Schwiedrzik, J. J., Sztucki, M., Beck, R. J., Shephard, J. D., Michler, J., Zysset, P. K., & Wolfram, U. (2019) · Acta Biomaterialia · doi:10.1016/j.actbio.2019.02.053 · Cited by 40
Self-citationThe bone organ system: form and function
Morgan, E. F., & Gerstenfeld, L. C. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-813073-5.00002-2 · Cited by 38
Fracture toughness of bone at the microscale
Aldegaither, N., Sernicola, G., Mesgarnejad, A., Karma, A., Balint, D. S., Wang, J., Saiz, E., Shefelbine, S. J., Porter, A. E., & Giuliani, F. (2020) · Acta Biomaterialia · doi:10.1016/j.actbio.2020.12.007 · Cited by 37
Casari, D., Pethő, L., Schürch, P., Maeder, X., Philippe, L., Michler, J., Zysset, P. K., & Schwiedrzik, J. J. (2019) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/jmr.2019.183 · Cited by 36
Self-citationSmall-Scale Mechanical Testing
Jayaram, V. (2022) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-080819-123640 · Cited by 36
Characterizing microcrack orientation distribution functions in osteonal bone samples
Wolfram, U., Schwiedrzik, J. J., Mirzaali, M. J., Bürki, A., Varga, P., Olivier, C., Peyrin, F., & Zysset, P. K. (2016) · Journal of Microscopy · doi:10.1111/jmi.12440 · Cited by 36
Self-citationSize Effects on the Mechanical Properties of Nanoporous Graphene Networks
Tang, D., Ren, C., Zhang, L., Tao, Y., Zhang, P., Lv, W. Z., Jia, X., Jiang, X., Zhou, G., Ohmura, T., et al. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201900311 · Cited by 35
Maghsoudi-Ganjeh, M., Lin, L., Wang, X., & Zeng, X. (2018) · Biomechanics and Modeling in Mechanobiology · doi:10.1007/s10237-018-1096-6 · Cited by 34
Anisotropic compressive behaviour of turbostratic graphite in carbon fibre
Wang, J., Salim, N. V., Fox, B. L., & Stanford, N. E. (2017) · Applied Materials Today · doi:10.1016/j.apmt.2017.07.010 · Cited by 33
Al-Qudsy, L. H., Hu, Y., Xu, H., & Yang, P. (2023) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.2c01377 · Cited by 33
A new insight into ductile fracture of ultrafine-grained Al-Mg alloys
Yu, H., Tieu, A. K., Lü, C., Liu, X., Lıu, M., Godbole, A., Kong, C., & Qin, Q. (2015) · Scientific Reports · doi:10.1038/srep09568 · Cited by 33
Hierarchical Biomechanics: Concepts, Bone as Prominent Example, and Perspectives Beyond
Hellmich, C., Ukaj, N., Smeets, B., Oosterwyck, H. V., Filipović, N., Zelaya-Lainez, L., Kalliauer, J., & Scheiner, S. (2022) · Applied Mechanics Reviews · doi:10.1115/1.4055032 · Cited by 32
Damage tolerance and toughness of elderly human femora
Martelli, S., Giorgi, M., Dall’Ara, E., & Perilli, E. (2021) · Acta Biomaterialia · doi:10.1016/j.actbio.2021.01.011 · Cited by 31
Microscale compressive behavior of hydrated lamellar bone at high strain rates
Peruzzi, C., Ramachandramoorthy, R., Groetsch, A., Casari, D., Grönquist, P., Rüggeberg, M., Michler, J., & Schwiedrzik, J. J. (2021) · Acta Biomaterialia · doi:10.1016/j.actbio.2021.07.005 · Cited by 30
Self-citationKeller, L. M., Schwiedrzik, J. J., Gasser, P., & Michler, J. (2017) · Journal of Geophysical Research Solid Earth · doi:10.1002/2017jb014240 · Cited by 30
Self-citationIn situ Wear Study Reveals Role of Microstructure on Self-Sharpening Mechanism in Sea Urchin Teeth
Espinosa, H. D., Zaheri, A., Nguyen, H. T., Restrepo, D., Daly, M., Frank, M., & McKittrick, J. M. (2019) · Matter · doi:10.1016/j.matt.2019.08.015 · Cited by 30
Dang, C., Olugbade, T. O., Fan, S., Zhang, H., Gao, L., Li, J., & Lü, Y. (2018) · Vacuum · doi:10.1016/j.vacuum.2018.07.048 · Cited by 29
Intrafibrillar mineralization deficiency and osteogenesis imperfecta mouse bone fragility
Maghsoudi-Ganjeh, M., Samuel, J., Ahsan, A. S., Wang, X., & Zeng, X. (2021) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2021.104377 · Cited by 29
Preiß, E. I., Merle, B., Xiao, Y., Gannott, F., Liebig, J. P., Wheeler, J. M., & Göken, M. (2021) · Journal of materials research/Pratt's guide to venture capital sources · doi:10.1557/s43578-020-00045-w · Cited by 29
Falco, P. D., Barbieri, E., Pugno, N. M., & Gupta, H. S. (2016) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.6b00637 · Cited by 28
MicroCT-based finite element models as a tool for virtual testing of cortical bone
Ramezanzadehkoldeh, M., & Skallerud, B. (2017) · Medical Engineering & Physics · doi:10.1016/j.medengphy.2017.04.011 · Cited by 27
Fernández, M. P., Dall’Ara, E., Bodey, A. J., Parwani, R., Barber, A. H., Blunn, G. W., & Tozzi, G. (2019) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.8b01044 · Cited by 27
Serrated chip formation mechanism in orthogonal cutting of cortical bone at small depths of cut
Wang, H., Satake, U., & Enomoto, T. (2023) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2023.118097 · Cited by 26
Splitting fracture in bovine bone using a porosity-based spring network model
Mayya, A., Praveen, P., Banerjee, A., & Rajesh, R. (2016) · Journal of The Royal Society Interface · doi:10.1098/rsif.2016.0809 · Cited by 26
Advances in Multiscale Characterization Techniques of Bone and Biomaterials Interfaces
Binkley, D. M., & Grandfield, K. (2017) · ACS Biomaterials Science & Engineering · doi:10.1021/acsbiomaterials.7b00420 · Cited by 26
Hu, Y., Guo, Q., Zhao, L., Li, Z., Fan, G., Li, Z., Xiong, D., Su, Y., & Zhang, D. (2017) · Scripta Materialia · doi:10.1016/j.scriptamat.2017.12.004 · Cited by 26
Ast, J., Schwiedrzik, J. J., Rohbeck, N., Maeder, X., & Michler, J. (2020) · Materials & Design · doi:10.1016/j.matdes.2020.108765 · Cited by 26
Self-citationIndermaur, M., Casari, D., Kochetkova, T., Peruzzi, C., Zimmermann, E. A., Rauch, F., Willie, B. M., Michler, J., Schwiedrzik, J. J., & Zysset, P. K. (2020) · Journal of Bone and Mineral Research · doi:10.1002/jbmr.4286 · Cited by 26
Self-citationCollins, C. J., Andriotis, O. G., Nedelkovski, V., Frank, M., Katsamenis, O. L., & Thurner, P. J. (2018) · Elsevier eBooks · doi:10.1016/b978-0-12-801238-3.99937-9 · Cited by 26
A new multiscale micromechanical model of vertebral trabecular bones
Haj-Ali, R. M., Massarwa, E., Aboudi, J., Galbusera, F., Wolfram, U., & Wilke, H. (2016) · Biomechanics and Modeling in Mechanobiology · doi:10.1007/s10237-016-0862-6 · Cited by 24
Self-citationRecent advances in the mechanical characterization of shales at nano-to micro-scales: A review
Sobhbidari, F., & Hu, Q. (2021) · Mechanics of Materials · doi:10.1016/j.mechmat.2021.104043 · Cited by 24
Schwiedrzik, J. J., Ramachandramoorthy, R., Edwards, T. E. J., Schürch, P., Casari, D., Duarte, M. J., Mohanty, G., Dehm, G., Maeder, X., Philippe, L., et al. (2022) · Materials & Design · doi:10.1016/j.matdes.2022.110836 · Cited by 24
Self-citationPuttbach, C., Prinz, G. S., & Murray, C. D. (2024) · Cement and Concrete Composites · doi:10.1016/j.cemconcomp.2024.105520 · Cited by 24
Structural orientation dependent sub-lamellar bone mechanics
Jiménez‐Palomar, I., Shipov, A., Shahar, R., & Barber, A. H. (2015) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2015.02.031 · Cited by 24
Reisinger, A., Frank, M., Thurner, P. J., & Pahr, D. H. (2020) · Biomechanics and Modeling in Mechanobiology · doi:10.1007/s10237-020-01329-0 · Cited by 24
Nanofibril-mediated fracture resistance of bone
Tertuliano, O. A., Edwards, B. W., Meza, L. R., Deshpande, V. S., & Greer, J. R. (2021) · Bioinspiration & Biomimetics · doi:10.1088/1748-3190/abdd9d · Cited by 24
Schwiedrzik, J. J., Raghavan, R., Rüggeberg, M., Hansen, S. H., Wehrs, J., Adusumalli, R. B., Zimmermann, T., & Michler, J. (2016) · The Philosophical Magazine A Journal of Theoretical Experimental and Applied Physics · doi:10.1080/14786435.2016.1235292 · Cited by 24
Self-citationIn situ micropillar compression of an anisotropic metal-organic framework single crystal
Zeng, Z., Xiao, Y., Wheeler, J. M., & Tan, J. (2023) · Communications Chemistry · doi:10.1038/s42004-023-00858-w · Cited by 23
Kimmel, D. B., Vennin, S., Desyatova, A. S., Turner, J. A., Akhter, M. P., Lappe, J. M., & Recker, R. R. (2022) · Osteoporosis International · doi:10.1007/s00198-022-06308-y · Cited by 23
Alizadeh, E., Dehestani, M., & Zysset, P. K. (2020) · Biomechanics and Modeling in Mechanobiology · doi:10.1007/s10237-020-01328-1 · Cited by 22
Self-citationMechanical properties of cortical bones related to temperature and orientation of Haversian canals
Ma, Z., Qiang, Z., Zhao, H., Piao, H., & Ren, L. (2020) · Materials Research Express · doi:10.1088/2053-1591/ab6899 · Cited by 21
Carré, A., & Mittal, K. L. (2009) · CRC Press eBooks · doi:10.1201/b12246 · Cited by 21
Small-scale high-cycle fatigue testing by dynamic microcantilever bending
Gabel, S., & Merle, B. (2020) · MRS Communications · doi:10.1557/mrc.2020.31 · Cited by 20
Casari, D., Kochetkova, T., Michler, J., Zysset, P. K., & Schwiedrzik, J. J. (2021) · Acta Biomaterialia · doi:10.1016/j.actbio.2021.06.032 · Cited by 20
Self-citationA strategy to reduce thermal expansion and achieve higher mechanical properties in iron alloys
Lu, H., Zhou, C., Song, Y., Zhang, Y., Wu, Y., Long, F., Yao, Y., Hao, J., Chen, Y., Yu, D., et al. (2025) · Nature Communications · doi:10.1038/s41467-024-55551-w · Cited by 20
Self-citationBiomimetic Intrafibrillar Mineralization of Hierarchically Structured Amyloid‐Like Fibrils
Miao, S., Guo, J. R., Zhang, Y., Liu, P., Chen, X., Han, Q., Wang, Y., Xuan, K., Yang, P., & Tao, F. (2025) · Advanced Materials · doi:10.1002/adma.202416824 · Cited by 20
Fracture behavior of solid electrolyte LATP material based on micro-pillar splitting method
Yan, G., Malzbender, J., Fu, S., Gross, J. P., Yu, S., Eichel, R., & Schwaiger, R. (2021) · Journal of the European Ceramic Society · doi:10.1016/j.jeurceramsoc.2021.04.026 · Cited by 20
Sahu, P., Ali, S. M., Shenoy, K. T., Mohan, S., Ananthanarayanan, A., Sugilal, G., & Kaushik, C. P. (2021) · Physical Chemistry Chemical Physics · doi:10.1039/d1cp00207d · Cited by 19
Multiscale mechanical consequences of ocean acidification for cold-water corals
Wolfram, U., Fernández, M. P., McPhee, S., Smith, E., Beck, R. J., Shephard, J. D., Özel, A., Erskine, C. S., Büscher, J., Titschack, J., et al. (2022) · Scientific Reports · doi:10.1038/s41598-022-11266-w · Cited by 19
Self-citationAlijani, H., & Vaughan, T. J. (2022) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2022.105139 · Cited by 19
Merle, B., & Höppel, H. W. (2017) · Experimental Mechanics · doi:10.1007/s11340-017-0362-3 · Cited by 19
Edwards, T. E. J., Gioacchino, F. D., Goodfellow, A. J., & Clegg, W. J. (2019) · International Journal of Fatigue · doi:10.1016/j.ijfatigue.2019.03.016 · Cited by 19
Structure–mechanics relationships in mineralized tendons
Spiesz, E. M., & Zysset, P. K. (2015) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2015.03.013 · Cited by 18
Self-citationCai, X., Peralta, L. M., Brenner, R., Iori, G., Cassereau, D., Raum, K., Laugier, P., & Grimal, Q. (2020) · Materialia · doi:10.1016/j.mtla.2020.100730 · Cited by 18
Raguin, É., Rechav, K., Brumfeld, V., Shahar, R., & Weiner, S. (2020) · Journal of Structural Biology · doi:10.1016/j.jsb.2020.107530 · Cited by 17
Fernández, M. P., Schwiedrzik, J. J., Bürki, A., Peyrin, F., Michler, J., Zysset, P. K., & Wolfram, U. (2023) · Acta Biomaterialia · doi:10.1016/j.actbio.2023.04.038 · Cited by 17
Self-citationDemir, B., & Walsh, T. R. (2019) · ACS Applied Polymer Materials · doi:10.1021/acsapm.9b00709 · Cited by 17
Design of Shape Memory Ceramics: Principles, Strategies and Perspectives
Zheng, W., Li, L., Zhao, L., & Guo, Q. (2024) · JOM · doi:10.1007/s11837-024-06639-7 · Cited by 16
Schwiedrzik, J. J., & Zysset, P. K. (2014) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2014.12.001 · Cited by 16
Self-citationZysset, P. K., Schwiedrzik, J. J., & Wolfram, U. (2016) · Journal of Biomechanics · doi:10.1016/j.jbiomech.2016.09.045 · Cited by 16
Self-citationNonlinear homogenisation of trabecular bone: Effect of solid phase constitutive model
Levrero-Florencio, F., Manda, K., Margetts, L., & Pankaj, P. (2016) · Proceedings of the Institution of Mechanical Engineers Part H Journal of Engineering in Medicine · doi:10.1177/0954411916676220 · Cited by 16
A theory of biological composites undergoing plastic deformations
An, B., & Sun, W. (2019) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2019.02.008 · Cited by 16
Xi, L., Wen, W., Wu, W., Qu, Z., Tao, R., Karunaratne, A., Liao, B., Li, Y., & Fang, D. (2020) · Composites Part B Engineering · doi:10.1016/j.compositesb.2020.108138 · Cited by 16
Metadata
- Authors
- Schwiedrzik, J., Raghavan, R., Bürki, A., LeNader, V., Wolfram, U., Michler, J., & Zysset, P.
- Affiliations
- University of Bern (CH)
- Max Planck Society (DE)
- Empa (CH)
- Corresponding author
- Schwiedrzik, Jakob
- Venue
- Nature Materials
- Published
- 2014-06-08
- Volume
- 13
- Issue
- 7
- Pages
- 740-747
- ISSN
- 1476-1122 (ISSN-L)
- 1476-4660
- OpenAlex
- W2090553875
- Cited by
- 182
- References
- 63
- Citations by year
- 2026: 8 · 2025: 11 · 2024: 8 · 2023: 20 · 2022: 14 · 2021: 21 · 2020: 25 · 2019: 17 · 2018: 10 · 2017: 14 · 2016: 22 · 2015: 10 · 2014: 1
- FWCI
- 16.22
- Type
- journal article
- Language
- en
- Open access
- green
- www.dora.lib4ri.ch
- Licence
- other-oa
- www.springer.com/tdm (tdm)
- www.springer.com/tdm (vor)
- Locations
- Nature Materials (publishedVersion)
- PubMed (publishedVersion)
- DORA Empa (Swiss Federal Laboratories for Materials Science and Technology (Empa)) (submittedVersion, other-oa)
- Bern Open Repository and Information System (University of Bern) (submittedVersion)
- Max Planck Digital Library (submittedVersion)
- MPG.PuRe (Max Planck Society) (submittedVersion)
- Nature Medicine
- Topics
- Health Sciences › Medicine › Orthopedics and Sports Medicine › Bone health and osteoporosis research
- Physical Sciences › Materials Science › Biomaterials › Calcium Carbonate Crystallization and Inhibition
- Physical Sciences › Engineering › Biomedical Engineering › Bone Tissue Engineering Materials
- Keywords
- lamellar bone, osteons, micropillar compression, bone mechanical properties, yield stress, ductility, damage accumulation, quasi-brittle fracture, cyclic compression, plastic deformation, elastic modulus, fracture mechanism
- MeSH terms
- Animals, Biomechanical Phenomena, Bone and Bones, Microscopy, Electron, Scanning, Sheep, Stress, Mechanical, Compressive Strength
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.