The DOI matches its Crossref record; 44 of the 44 references it cites were found in a registry or an index.
Water-based and biocompatible 2D crystal inks for all-inkjet-printed heterostructures
Open accessAbstract
Exploiting the properties of two-dimensional crystals requires a mass production method able to produce heterostructures of arbitrary complexity on any substrate. Solution processing of graphene allows simple and low-cost techniques such as inkjet printing to be used for device fabrication. However, the available printable formulations are still far from ideal as they are either based on toxic solvents, have low concentration, or require time-consuming and expensive processing. In addition, none is suitable for thin-film heterostructure fabrication due to the re-mixing of different two-dimensional crystals leading to uncontrolled interfaces and poor device performance. Here, we show a general approach to achieve inkjet-printable, water-based, two-dimensional crystal formulations, which also provide optimal film formation for multi-stack fabrication. We show examples of all-inkjet-printed heterostructures, such as large-area arrays of photosensors on plastic and paper and programmable logic memory devices. Finally, in vitro dose-escalation cytotoxicity assays confirm the biocompatibility of the inks, extending their possible use to biomedical applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Geim, A. K., & Novoselov, K. S. (2007) · Nature Materials · doi:10.1038/nmat1849 · Cited by 39,979
Raman Spectrum of Graphene and Graphene Layers
Ferrari, A. C., Meyer, J. C., Scardaci, V., Casiraghi, C., Lazzeri, M., Mauri, F., Piscanec, S., Jiang, D., Novoselov, K. S., Roth, S., et al. (2006) · Physical Review Letters · doi:10.1103/physrevlett.97.187401 · Cited by 15,047
Self-citationGraphene: Status and Prospects
Geim, A. K. (2009) · Science · doi:10.1126/science.1158877 · Cited by 13,942
Two-dimensional atomic crystals
Novoselov, K. S., Jiang, D., Schedin, F., Booth, T. J., Khotkevich, V. V., Morozov, S. V., & Geim, A. K. (2005) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0502848102 · Cited by 11,788
Van der Waals heterostructures
Geim, A. K., & Grigorieva, I. V. (2013) · Nature · doi:10.1038/nature12385 · Cited by 10,875
Novoselov, K. S., Fal′ko, V. I., Colombo, L., Gellert, P. R., Schwab, M. G., & Kim, K. (2012) · Nature · doi:10.1038/nature11458 · Cited by 9,251
Roll-to-roll production of 30-inch graphene films for transparent electrodes
Bae, S., Kim, H., Lee, Y., Xu, X., Park, J.-S., Zheng, Y., Balakrishnan, J., Lei, T., Ri Kim, H., Song, Y. I., et al. (2010) · Nature Nanotechnology · doi:10.1038/nnano.2010.132 · Cited by 8,136
Two-Dimensional Nanosheets Produced by Liquid Exfoliation of Layered Materials
Coleman, J. N., Lotya, M., O’Neill, A., Bergin, S. D., King, P. J., Khan, U., Young, K., Gaucher, A., De, S., Smith, R. J., et al. (2011) · Science · doi:10.1126/science.1194975 · Cited by 7,242
Introduction to Percolation Theory
Stauffer, D., Aharony, A., & Redner, S. (1993) · Physics Today · doi:10.1063/1.2808877 · Cited by 6,666
III. An essay on the cohesion of fluids
Young, T. (1805) · Philosophical Transactions of the Royal Society of London · doi:10.1098/rstl.1805.0005 · Cited by 6,643
Cited by
Emerging Electrochromic Materials and Devices for Future Displays
Gu, C., Jia, A.-B., Zhang, Y.-M., & Zhang, S. X.-A. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c01055 · Cited by 833
Electrically-Transduced Chemical Sensors Based on Two-Dimensional Nanomaterials
Meng, Z., Stolz, R. M., Mendecki, L., & Mirica, K. A. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00311 · Cited by 773
Recent Progress and Future Prospects of 2D‐Based Photodetectors
Huo, N., & Konstantatos, G. (2018) · Advanced Materials · doi:10.1002/adma.201801164 · Cited by 730
Pham, P. V., Bodepudi, S. C., Shehzad, K., Liu, Y., Xu, Y., Yu, B., & Duan, X. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00735 · Cited by 708
Preparation of 2D material dispersions and their applications
Cai, X., Luo, Y., Liu, B., & Cheng, H.-M. (2018) · Chemical Society Reviews · doi:10.1039/c8cs00254a · Cited by 665
Functional inks and printing of two-dimensional materials
Hu, G., Kang, J., Ng, L. W. T., Zhu, X., Howe, R. C. T., Jones, C. G., Hersam, M. C., & Hasan, T. (2018) · Chemical Society Reviews · doi:10.1039/c8cs00084k · Cited by 569
All-printed thin-film transistors from networks of liquid-exfoliated nanosheets
Kelly, A. G., Hallam, T., Backes, C., Harvey, A., Esmaeily, A. S., Godwin, I., Coelho, J., Nicolosi, V., Lauth, J., Kulkarni, A., et al. (2017) · Science · doi:10.1126/science.aal4062 · Cited by 501
Production and processing of graphene and related materials
Backes, C., Abdelkader, A. M., Alonso, C., Andrieux-Ledier, A., Arenal, R., Azpeitia, J., Balakrishnan, N., Banszerus, L., Barjon, J., Bartali, R., et al. (2020) · 2D Materials · doi:10.1088/2053-1583/ab1e0a · Cited by 501
Self-citationHuang, Q., & Zhu, Y. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201800546 · Cited by 482
MXene Printing and Patterned Coating for Device Applications
Zhang, Y., Wang, Y., Jiang, Q., El‐Demellawi, J. K., Kim, H., & Alshareef, H. N. (2020) · Advanced Materials · doi:10.1002/adma.201908486 · Cited by 449
Carey, T., Cacovich, S., Divitini, G., Ren, J., Mansouri, A., Kim, J. M., Wang, C., Ducati, C., Sordan, R., & Torrisi, F. (2017) · Nature Communications · doi:10.1038/s41467-017-01210-2 · Cited by 433
Quantum engineering of transistors based on 2D materials heterostructures
Iannaccone, G., Bonaccorso, F., Colombo, L., & Fiori, G. (2018) · Nature Nanotechnology · doi:10.1038/s41565-018-0082-6 · Cited by 416
Self-citationAbdolhosseinzadeh, S., Schneider, R., Verma, A., Heier, J., Nüesch, F., & Zhang, C. (. (2020) · Advanced Materials · doi:10.1002/adma.202000716 · Cited by 406
Black phosphorus ink formulation for inkjet printing of optoelectronics and photonics
Hu, G., Albrow-Owen, T., Jin, X., Ali, A., Hu, Y., Howe, R. C. T., Shehzad, K., Yang, Z., Zhu, X., Woodward, R. I., et al. (2017) · Nature Communications · doi:10.1038/s41467-017-00358-1 · Cited by 400
Bolotsky, A., Butler, D., Dong, C., Gerace, K., Glavin, N. R., Muratore, C., Robinson, J. A., & Ebrahimi, A. (2019) · ACS Nano · doi:10.1021/acsnano.9b03632 · Cited by 381
Dai, J., Ogbeide, O., Macadam, N., Sun, Q., Yu, W., Li, Y., Su, B.-L., Hasan, T., Huang, X., & Huang, W. (2020) · Chemical Society Reviews · doi:10.1039/c9cs00459a · Cited by 378
Excellent oxidation resistive MXene aqueous ink for micro-supercapacitor application
Wu, C.-W., Unnikrishnan, B., Chen, I.-W. P., Harroun, S. G., Chang, H.-T., & Huang, C.-C. (2020) · Energy Storage Materials · doi:10.1016/j.ensm.2019.09.026 · Cited by 364
2D Materials in Flexible Electronics: Recent Advances and Future Prospectives
Katiyar, A. K., Hoang, A. T., Xu, D., Hong, J., Kim, B. J., Ji, S., & Ahn, J.-H. (2024) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00302 · Cited by 363
Screen-Printing of a Highly Conductive Graphene Ink for Flexible Printed Electronics
He, P., Cao, J., Ding, H., Liu, C., Neilson, J., Li, Z., Kinloch, I. A., & Derby, B. (2019) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.9b04589 · Cited by 340
Luo, Z.-D., Xia, X., Yang, M.-M., Wilson, N. R., Gruverman, A., & Alexe, M. (2020) · ACS Nano · doi:10.1021/acsnano.9b07687 · Cited by 332
Design and advanced manufacturing of electromagnetic interference shielding materials
Liu, J., Yu, M.-Y., Yu, Z.-Z., & Nicolosi, V. (2023) · Materials Today · doi:10.1016/j.mattod.2023.03.022 · Cited by 332
Nonvolatile Memories Based on Graphene and Related 2D Materials
Bertolazzi, S., Bondavalli, P., Roche, S., San, T., Choi, S., Colombo, L., Bonaccorso, F., & Samorì, P. (2019) · Advanced Materials · doi:10.1002/adma.201806663 · Cited by 318
From two-dimensional materials to their heterostructures: An electrochemist's perspective
Velický, M., & Toth, P. S. (2017) · Applied Materials Today · doi:10.1016/j.apmt.2017.05.003 · Cited by 295
Huang, H., Feng, W., & Chen, Y. (2021) · Chemical Society Reviews · doi:10.1039/d0cs01138j · Cited by 285
Room-temperature high-precision printing of flexible wireless electronics based on MXene inks
Shao, Y., Wei, L., Wu, X., Jiang, C., Yao, Y., Peng, B., Chen, H., Huangfu, J., Ying, Y., Zhang, C. J., et al. (2022) · Nature Communications · doi:10.1038/s41467-022-30648-2 · Cited by 284
Guo, H., Hu, Z., Liu, Z., & Tian, J. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202007810 · Cited by 279
Synaptic devices based neuromorphic computing applications in artificial intelligence
Sun, B., Guo, T., Zhou, G., Ranjan, S., Jiao, Y., Wei, L., Zhou, Y. N., & Wu, Y. A. (2021) · Materials Today Physics · doi:10.1016/j.mtphys.2021.100393 · Cited by 275
Bertolazzi, S., Gobbi, M., Zhao, Y., Backes, C., & Samorì, P. (2018) · Chemical Society Reviews · doi:10.1039/c8cs00169c · Cited by 269
Shen, X., Zheng, Q., & Kim, J.-K. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100708 · Cited by 264
Li, H., & Liang, J. (2020) · Advanced Materials · doi:10.1002/adma.201805864 · Cited by 263
Direct synthesis of metastable phases of 2D transition metal dichalcogenides
Sokolikova, M. S., & Mattevi, C. (2020) · Chemical Society Reviews · doi:10.1039/d0cs00143k · Cited by 261
Metadata
- Authors
- McManus, D., Vranic, S., Withers, F., Sanchez-Romaguera, V., Macucci, M., Yang, H., Sorrentino, R., Parvez, K., Son, S.-K., Iannaccone, G., Kostarelos, K., Fiori, G., & Casiraghi, C.
- Venue
- Nature Nanotechnology
- Published
- 2017-01-30
- Volume
- 12
- Issue
- 4
- Pages
- 343-350
- ISSN
- 1748-3387 (ISSN-L)
- 1748-3395
- OpenAlex
- W2582156391
- Cited by
- 577
- References
- 44
- FWCI
- 26.52
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.