CoChat
Sign Up
Cited by 1462D Materials and ApplicationsSemiconductor Lasers and Optical DevicesPhotonic and Optical Devices

The DOI matches its Crossref record; 41 of the 42 references it cites were found in a registry or an index.

Room-temperature 2D semiconductor activated vertical-cavity surface-emitting lasers

Open access
Shang, Jingzhi, Cong, Chunxiao, Wang, Zilong, Peimyoo, Namphung, Wu, Lishu, Zou, Chenji, Chen, Yu, Chin, Xin Yu, Wang, Jianpu, Soci, Cesare, Huang, Wei, Yu, Ting·2017·Nature Communications
DOI 10.1038/s41467-017-00743-wPMC PMC5599555
Open this paper in CoChat — free accountOpen PDF

Abstract

Abstract Two-dimensional (2D) semiconductors are opening a new platform for revitalizing widely spread optoelectronic applications. The realisation of room-temperature vertical 2D lasing from monolayer semiconductors is fundamentally interesting and highly desired for appealing on-chip laser applications such as optical interconnects and supercomputing. Here, we present room-temperature low-threshold lasing from 2D semiconductor activated vertical-cavity surface-emitting lasers (VCSELs) under continuous-wave pumping. 2D lasing is achieved from a 2D semiconductor. Structurally, dielectric oxides were used to construct the half-wavelength-thick cavity and distributed Bragg reflectors, in favour of single-mode operation and ultralow optical loss; in the cavity centre, the direct-bandgap monolayer WS2was embedded as the gain medium, compatible with the planar VCSEL configuration and the monolithic integration technology. This work demonstrates 2D semiconductor activated VCSELs with desirable emission characteristics, which represents a major step towards practical optoelectronic applications of 2D semiconductor lasers.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1038/s41467-017-00743-w

Cites

41 of 41 references verified0 citation errors · 0 not checkable

Statistics

Figures

Fig. 1 Structure of a 2D semiconductor embedded microcavity and its reflection. a Schematic of a 2D semiconductor embedded microcavity on the SiO2/Si substrate consisting of 12.5 pairs of bottom TiO2/SiO2 distributed Bragg reflectors (DBRs), half-wavelength-thick SiO2 cavity with embedded monolayer WS2 and 8.5 pairs of top DBRs. b Representative scanning electron microscope image of the cross-section. The inset shows the zoom-in image. Scale bars in b and its inset represent 500 nm. c, d Reflection spectra of monolayer WS2 embedded microcavity (in blue) and the blank microcavity region (in black) in the spectral range from 500 to 800 nm, respectively; The insets show the enlarged spectra together with the Lorentzian fits (in red) in the cavity-mode regions, respectively
Fig. 1 Structure of a 2D semiconductor embedded microcavity and its reflection. a Schematic of a 2D semiconductor embedded microcavity on the SiO2/Si substrate consisting of 12.5 pairs of bottom TiO2/SiO2 distributed Bragg reflectors (DBRs), half-wavelength-thick SiO2 cavity with embedded monolayer WS2 and 8.5 pairs of top DBRs. b Representative scanning electron microscope image of the cross-section. The inset shows the zoom-in image. Scale bars in b and its inset represent 500 nm. c, d Reflection spectra of monolayer WS2 embedded microcavity (in blue) and the blank microcavity region (in black) in the spectral range from 500 to 800 nm, respectively; The insets show the enlarged spectra together with the Lorentzian fits (in red) in the cavity-mode regions, respectivelyCC BY · PubMed Central
Fig. 2 Room-temperature single-mode vertical lasing. a Optical image of an isolated monolayer WS2 on the half cavity marked by the red dashed circle and b spatially resolved photoluminescence (PL) intensity mapping of the complete microcavity sample (integrated in the spectral range from 635.5 to 637.5 nm). The scale bars represent 2 µm. c The PL spectrum collected at the sample centre and at the excitation power of 100 nW. d PL spectra collected at the sample centre under varied excitation powers < 10 nW. The grey dashed lines are Lorentzian fits to the data. e–g PL output intensity, width and position as functions of excitation power, respectively. Error bars are extracted from Lorentzian fits. In e, three regions with different slopes are labelled as spontaneous emission (SE, blue), superlinear amplification (SLA, yellow) and lasing (green), respectively, where the dashed black line indicates the threshold region. The extracted slopes of SE, SLA and lasing are about 0.6, 1.6 and 1.0, respectively. With the increasing excitation power, the spectral width narrows f, while the position remains stable g
Fig. 2 Room-temperature single-mode vertical lasing. a Optical image of an isolated monolayer WS2 on the half cavity marked by the red dashed circle and b spatially resolved photoluminescence (PL) intensity mapping of the complete microcavity sample (integrated in the spectral range from 635.5 to 637.5 nm). The scale bars represent 2 µm. c The PL spectrum collected at the sample centre and at the excitation power of 100 nW. d PL spectra collected at the sample centre under varied excitation powers < 10 nW. The grey dashed lines are Lorentzian fits to the data. e–g PL output intensity, width and position as functions of excitation power, respectively. Error bars are extracted from Lorentzian fits. In e, three regions with different slopes are labelled as spontaneous emission (SE, blue), superlinear amplification (SLA, yellow) and lasing (green), respectively, where the dashed black line indicates the threshold region. The extracted slopes of SE, SLA and lasing are about 0.6, 1.6 and 1.0, respectively. With the increasing excitation power, the spectral width narrows f, while the position remains stable gCC BY · PubMed Central
Fig. 3 Confocal photoluminescence scanning along Z-direction. a Normalised photoluminescence spectra collected at the cavity centre (black), surface (red) and 5.1 µm (i.e., the distance above the cavity centre, blue), respectively. The used excitation power is 100 nW. The inset shows the emission schematic. b Comparison of normalised integrated intensities of the lasing emission (LE) and the leaked spontaneous emission band (LSE) at various Z-positions. Error bars are extracted from single and double Lorentzian fits to the confocal spectra. c The lasing intensity ratio to the detected total light output as a function of Z-position. The defined Z-direction is perpendicular to the sample surface. I LE and I LSE represent the integrated intensities of LE and LSE, respectively
Fig. 3 Confocal photoluminescence scanning along Z-direction. a Normalised photoluminescence spectra collected at the cavity centre (black), surface (red) and 5.1 µm (i.e., the distance above the cavity centre, blue), respectively. The used excitation power is 100 nW. The inset shows the emission schematic. b Comparison of normalised integrated intensities of the lasing emission (LE) and the leaked spontaneous emission band (LSE) at various Z-positions. Error bars are extracted from single and double Lorentzian fits to the confocal spectra. c The lasing intensity ratio to the detected total light output as a function of Z-position. The defined Z-direction is perpendicular to the sample surface. I LE and I LSE represent the integrated intensities of LE and LSE, respectivelyCC BY · PubMed Central
Fig. 4 2D lasing from monolayer WS2 flakes. a Optical image of three 1L-WS2 flakes on the half cavity and b spatially resolved PL intensity image of the complete microcavity samples. The PL intensity is integrated from 600 to 645 nm. Line profile analysis was carried out along the marked lines. L and R indicate left and right sides, respectively. The scale bars represent 3 µm. c The series of PL spectra taken along four marked lines with a step size of 500 nm. The colour traces from bottom to top correspond to the spectra taken from left to right of each scanning line in b. The dominant lasing modes are highlighted in cyan. d Statistics of positions and widths of narrow emission bands in 67 spectra sampling from three flakes
Fig. 4 2D lasing from monolayer WS2 flakes. a Optical image of three 1L-WS2 flakes on the half cavity and b spatially resolved PL intensity image of the complete microcavity samples. The PL intensity is integrated from 600 to 645 nm. Line profile analysis was carried out along the marked lines. L and R indicate left and right sides, respectively. The scale bars represent 3 µm. c The series of PL spectra taken along four marked lines with a step size of 500 nm. The colour traces from bottom to top correspond to the spectra taken from left to right of each scanning line in b. The dominant lasing modes are highlighted in cyan. d Statistics of positions and widths of narrow emission bands in 67 spectra sampling from three flakesCC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 42 references

Cited by

Sorted by citations

Related

See all

Metadata

Authors
Shang, J., Cong, C., Wang, Z., Peimyoo, N., Wu, L., Zou, C., Chen, Y., Chin, X. Y., Wang, J., Soci, C., Huang, W., & Yu, T.
Affiliations
  • Nanjing Tech University (CN)
  • Fudan University (CN)
  • Nanyang Technological University (SG)
Corresponding author
  • Huang, Wei
  • Yu, Ting
ORCID
Venue
Nature Communications
Publisher
Springer Science and Business Media LLC
Published
2017-09-14
Volume
8
Issue
1
Pages
543-543
ISSN
2041-1723 (ISSN-L)
DOI
10.1038/s41467-017-00743-w
PMC
PMC5599555
OpenAlex
W2754035931
Cited by
145
References
42
Citations by year
2026: 6 · 2025: 12 · 2024: 18 · 2023: 15 · 2022: 17 · 2021: 18 · 2020: 21 · 2019: 21 · 2018: 17
FWCI
6.81
Type
journal article
Language
en
Open access
Licence
Locations
  • Nature Communications (publishedVersion, cc-by)
  • Europe PMC (PubMed Central) (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • RePEc: Research Papers in Economics (submittedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
  • DR-NTU (Nanyang Technological University) (submittedVersion, cc-by)
Funders
  • Natural Science Foundation of Shanghai (16ZR1402500, BM2012010)
  • Synergetic Innovation Center for Organic Electronics and Information Displays (61136003)
  • National Natural Science Foundation of China (51173081, 2015CB932200, BM2012010, YX03001, IRT1148, 61136003)
  • Ministry of Education of the People's Republic of China (2015CB932200, YX03001, IRT1148)
  • Government of Jiangsu Province (BM2012010, YX03001)
  • Ministry of Education, India
  • Natural Science Foundation of Jiangsu Province (61136003, BM2012010, YX03001)
  • Priority Academic Program Development of Jiangsu Higher Education Institutions (YX03001, IRT1148)
Topics
  • Physical Sciences › Materials Science › Materials Chemistry › 2D Materials and Applications
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Semiconductor Lasers and Optical Devices
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Photonic and Optical Devices
Keywords
vertical-cavity surface-emitting lasers, two-dimensional semiconductors, monolayer WS2, room-temperature lasing, low-threshold lasing, distributed Bragg reflector, continuous-wave pumping, single-mode operation, monolithic integration

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review