Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat

The DOI matches its Crossref record; 54 of the 54 references it cites were found in a registry or an index; 21 of the 33 sources its claims cite were checked for support.

Direct observation of valley-polarized topological edge states in designer surface plasmon crystals

Open access
Wu, Xiaoxiao, Meng, Yan, Tian, Jingxuan, Huang, Yingzhou, Xiang, Hong, Han, Dezhuan, Wen, Weijia · 2017 · Nature Communications

Abstract

The extensive research of two-dimensional layered materials has revealed that valleys, as energy extrema in momentum space, could offer a new degree of freedom for carrying information. Based on this concept, researchers have predicted valley-Hall topological insulators that could support valley-polarized edge states at non-trivial domain walls. Recently, several kinds of photonic and sonic crystals have been proposed as classical counterparts of valley-Hall topological insulators. However, direct experimental observation of valley-polarized edge states in photonic crystals has remained difficult until now. Here, we demonstrate a designer surface plasmon crystal comprising metallic patterns deposited on a dielectric substrate, which can become a valley-Hall photonic topological insulator by exploiting the mirror-symmetry-breaking mechanism. Topological edge states with valley-dependent transport are directly visualized in the microwave regime. The observed edge states are confirmed to be fully valley-polarized through spatial Fourier transforms. Topological protection of the edge states at sharp corners is also experimentally demonstrated.

Overview

CoChat Summary

## TL;DR

The paper experimentally demonstrates valley-polarized topological edge states in a designer surface plasmon crystal operating in the microwave regime. By breaking mirror symmetry, the authors create a valley-Hall photonic topological insulator and directly visualize valley-dependent transport, including robust propagation through sharp corners.

## Key findings

  • In the unperturbed triangular-lattice DSP crystal, the first and second bands touch at the K and K′ valleys at the Dirac frequency of 2π × 7.61 GHz; breaking ΓK-mirror symmetry by setting ΔR = ±0.5 mm opens a full bandgap.
  • The effective Hamiltonian fit gives v_D = 5.42 × 10^7 m s−1 and Δ_p = ±60.68 m−1 for patterns A and B, and the valley Chern numbers of the first band are ±1/2.
  • In the beam-splitter experiment, transports involving opposite valleys are heavily suppressed; within the bandgap, the sum of measured amplitude ratios for same-valley transport is at least 14 dB larger than those involving opposite valleys.
  • The measured bandgap of the fabricated sample is 7.28–8.42 GHz, compared with the simulated 7.05–8.12 GHz, a shift of about 3.7% toward higher frequency.

## Methods

  • The study uses a triangular-lattice designer surface plasmon crystal on an F4B dielectric substrate (relative permittivity 2.65, thickness 1 mm) with a 35 μm copper layer; mirror-symmetry breaking is introduced by changing the radii R1 and R2.
  • The authors analyze the system with an effective k·p Hamiltonian, compute Berry curvature and valley Chern numbers, and perform full-wave FEM simulations in COMSOL.
  • Experiments use two monopole antennas, a vector network analyzer, and near-field scans of the Ez component; field maps are recorded 1 mm above the metallic surface with 1 × 1 mm² resolution.

## Limitations

  • The paper states that the data supporting the figures and findings are available from the corresponding authors upon request; no public dataset is stated.
  • The text makes evident that the work is demonstrated in the microwave regime on a specific DSP geometry, so direct experimental evidence is limited to that platform and frequency range (text-evident).
  • The paper notes a 3.7% fabrication-induced frequency shift between measured and simulated bandgaps, indicating sensitivity to fabrication errors (text-evident).

Model-written summary. Check it against the paper before relying on it.

Integrity signals

Registry

Crossref · 10.1038/s41467-017-01515-2

Cites

54 of 54 references verified0 citation errors · 0 not checkable

Statistics

Nothing to recompute.

Figures

Fig. 1 Conceptual illustration of the DSP crystal and frequency split of circularly polarized valley states. a Schematic illustration of the triangular-lattice designer surface plasmon (DSP) crystal consisting of metallic patterns (yellow) on a dielectric F4B substrate (gray). b Top-view Wigner–Seitz unit cell of the lattice. The metallic pattern consists of an inner circle with radius r = 1 mm and six radial fans with sector angle 30°, three of them marked by red outlines having radius R 1, the other three marked by blue outlines having radius R 2. c First Brillouin zone (FBZ) of the triangular lattice. d Calculated band structure of the DSP crystal along the special directions of the FBZ with R 1 = R 2 = 5.55 mm. The blue dashed lines represent the dispersion of EM wave in air (light line) and only the guided part of the band structure is shown. The inset enlarges the area enclosed by the green rectangle around K/K′ valley, showing the gapless Dirac cone. e Simulated field maps of E z component on the xy plane 1 mm above the surface, showing the two degenerate states at the K valley with energy flux represented by blue arrows. The circulating energy flux of the states is either left-hand circularly polarized (LCP) or right-hand circularly polarized (RCP). The color indicates the amplitude of E z component. f Calculated eigenfrequencies of the LCP and RCP states at the K valley when the parameter ΔR = R 1 − R 2 varies while the mean radius R¯ = (R 1 + R 2)/2 = 5.55 mm is kept constant. The inversion of frequency order of the LCP and RCP states indicates a topological phase transition when ΔR crosses zero. The evolution of the unit cell is indicated in the inset, where pattern A corresponds to ΔR = −0.5 mm, the unperturbed pattern corresponds to ΔR = 0, and pattern B corresponds to ΔR = 0.5 mm. The difference between R 1 and R 2 are exaggerated for a clearer visualization
Fig. 1 Conceptual illustration of the DSP crystal and frequency split of circularly polarized valley states. a Schematic illustration of the triangular-lattice designer surface plasmon (DSP) crystal consisting of metallic patterns (yellow) on a dielectric F4B substrate (gray). b Top-view Wigner–Seitz unit cell of the lattice. The metallic pattern consists of an inner circle with radius r = 1 mm and six radial fans with sector angle 30°, three of them marked by red outlines having radius R 1, the other three marked by blue outlines having radius R 2. c First Brillouin zone (FBZ) of the triangular lattice. d Calculated band structure of the DSP crystal along the special directions of the FBZ with R 1 = R 2 = 5.55 mm. The blue dashed lines represent the dispersion of EM wave in air (light line) and only the guided part of the band structure is shown. The inset enlarges the area enclosed by the green rectangle around K/K′ valley, showing the gapless Dirac cone. e Simulated field maps of E z component on the xy plane 1 mm above the surface, showing the two degenerate states at the K valley with energy flux represented by blue arrows. The circulating energy flux of the states is either left-hand circularly polarized (LCP) or right-hand circularly polarized (RCP). The color indicates the amplitude of E z component. f Calculated eigenfrequencies of the LCP and RCP states at the K valley when the parameter ΔR = R 1 − R 2 varies while the mean radius R¯ = (R 1 + R 2)/2 = 5.55 mm is kept constant. The inversion of frequency order of the LCP and RCP states indicates a topological phase transition when ΔR crosses zero. The evolution of the unit cell is indicated in the inset, where pattern A corresponds to ΔR = −0.5 mm, the unperturbed pattern corresponds to ΔR = 0, and pattern B corresponds to ΔR = 0.5 mm. The difference between R 1 and R 2 are exaggerated for a clearer visualizationCC BY · PubMed Central
Fig. 2 Band structure of the DSP crystal with breaking of ΓK-mirror symmetry and topological property of its first band. a Calculated band structure of the DSP crystal along the special directions of the FBZ when ΔR = ±0.5 mm (pattern A or B). Blue dashed lines represent the light line and only the guided part of the band structure is shown. The light yellow shaded region represents the full bandgap. b Berry curvature of the first band for pattern A along the line ky=2π∕(√3a) in the reciprocal space from numerical calculations (open circles) and effective Hamiltonian model near the K (blue solid line) or K′ (red solid line) valley. c Berry curvature for pattern A around a K′ valley as a function of δk for different polar angles θ (open symbols). The red solid line represents the isotropic result from the effective Hamiltonian model. The inset shows the definition of δk and θ in the reciprocal space. d Valley Chern numbers summarized for pattern A and pattern B
Fig. 2 Band structure of the DSP crystal with breaking of ΓK-mirror symmetry and topological property of its first band. a Calculated band structure of the DSP crystal along the special directions of the FBZ when ΔR = ±0.5 mm (pattern A or B). Blue dashed lines represent the light line and only the guided part of the band structure is shown. The light yellow shaded region represents the full bandgap. b Berry curvature of the first band for pattern A along the line ky=2π∕(√3a) in the reciprocal space from numerical calculations (open circles) and effective Hamiltonian model near the K (blue solid line) or K′ (red solid line) valley. c Berry curvature for pattern A around a K′ valley as a function of δk for different polar angles θ (open symbols). The red solid line represents the isotropic result from the effective Hamiltonian model. The inset shows the definition of δk and θ in the reciprocal space. d Valley Chern numbers summarized for pattern A and pattern BCC BY · PubMed Central
Fig. 3 Edge states at domain walls between two valley-Hall PTIs. a Sketch of an AB-type domain wall, in which pattern A is replicated at the upper domain and pattern B is replicated at the lower domain, respectively. The domain wall is marked by the red solid lines. b Calculated band structure of an AB-type (solid line) domain wall and a BA-type (dashed line) domain wall. The shaded regions represent the projection of the bulk bands. The red lines indicate positive group velocity (forward) and the blue lines indicate negative group velocity (backward). c Simulated field maps of E z component on the xy plane 1 mm above the surface, showing the edge states of AB-type domain wall and BA-type domain wall at the K′ valley, respectively. The color indicates the amplitude of E z component. The blue arrows represent the energy flux. The scale bar is 12 mm. d The averaged |E z| (averaged along the x direction in a unit cell) of the edge states shown in c. The black dash-dotted line represents the corresponding result calculated from the effective Hamiltonian model
Fig. 3 Edge states at domain walls between two valley-Hall PTIs. a Sketch of an AB-type domain wall, in which pattern A is replicated at the upper domain and pattern B is replicated at the lower domain, respectively. The domain wall is marked by the red solid lines. b Calculated band structure of an AB-type (solid line) domain wall and a BA-type (dashed line) domain wall. The shaded regions represent the projection of the bulk bands. The red lines indicate positive group velocity (forward) and the blue lines indicate negative group velocity (backward). c Simulated field maps of E z component on the xy plane 1 mm above the surface, showing the edge states of AB-type domain wall and BA-type domain wall at the K′ valley, respectively. The color indicates the amplitude of E z component. The blue arrows represent the energy flux. The scale bar is 12 mm. d The averaged |E z| (averaged along the x direction in a unit cell) of the edge states shown in c. The black dash-dotted line represents the corresponding result calculated from the effective Hamiltonian modelCC BY · PubMed Central
Fig. 4 Topological transport of valley-polarized edge states. a Schematic diagram of the beam splitter used for selective excitation of valley-polarized edge states. The beam splitter comprises two domains of patterns A and two domains of patterns B. The black dashed lines and solid lines represent AB-type domain walls and BA-type domain walls, respectively. The red and blue arrows represent edges states near K and K′ valleys, respectively. b Photograph of the experiment setup. Two monopole antennas are used in experiments (see Methods section). DSPs are excited by one of the antennas and E z component of the transmitted wave is measured by the other one. Inset shows a top-view photograph of the fabricated beam splitter. c, d Measured E z amplitude ratio t ij (outgoing terminal i, incident terminal j) when the source is placed at terminal 1 (c) or terminal 2 (d). The unshaded region corresponds to the bandgap obtained from experimental measurement
Fig. 4 Topological transport of valley-polarized edge states. a Schematic diagram of the beam splitter used for selective excitation of valley-polarized edge states. The beam splitter comprises two domains of patterns A and two domains of patterns B. The black dashed lines and solid lines represent AB-type domain walls and BA-type domain walls, respectively. The red and blue arrows represent edges states near K and K′ valleys, respectively. b Photograph of the experiment setup. Two monopole antennas are used in experiments (see Methods section). DSPs are excited by one of the antennas and E z component of the transmitted wave is measured by the other one. Inset shows a top-view photograph of the fabricated beam splitter. c, d Measured E z amplitude ratio t ij (outgoing terminal i, incident terminal j) when the source is placed at terminal 1 (c) or terminal 2 (d). The unshaded region corresponds to the bandgap obtained from experimental measurementCC BY · PubMed Central
Fig. 5 Near-field maps of valley-polarized edge states and corresponding spatial Fourier spectra. a, b Simulated field maps of E z component at 7.50 GHz on the xy plane 1 mm above the metallic surface. The source denoted by the blue star is placed at terminal 1 in a and terminal 2 in b. Gray arrows denote the direction of the valley-polarized edge states. Green dashed rectangles denote the regions of the area 205 × 220 mm2 scanned in experiments. The scale bar is 60 mm. c, d Measured field maps of E z component at 7.50 GHz in the region of the sample denoted by green dashed rectangles in a and b, respectively. The blue dashed rectangles denote the interior regions where we perform Fourier transforms. The scale bar is 40 mm. e, f Spatial Fourier spectra of the scanned E z component. The green solid hexagons represent the FBZs and the yellow dashed circles represent the 7.50-GHz isofrequency contours of the light cone. The color indicates the amplitude of E z component in field maps and the amplitude of spatial Fourier transforms in spatial Fourier spectra, respectively
Fig. 5 Near-field maps of valley-polarized edge states and corresponding spatial Fourier spectra. a, b Simulated field maps of E z component at 7.50 GHz on the xy plane 1 mm above the metallic surface. The source denoted by the blue star is placed at terminal 1 in a and terminal 2 in b. Gray arrows denote the direction of the valley-polarized edge states. Green dashed rectangles denote the regions of the area 205 × 220 mm2 scanned in experiments. The scale bar is 60 mm. c, d Measured field maps of E z component at 7.50 GHz in the region of the sample denoted by green dashed rectangles in a and b, respectively. The blue dashed rectangles denote the interior regions where we perform Fourier transforms. The scale bar is 40 mm. e, f Spatial Fourier spectra of the scanned E z component. The green solid hexagons represent the FBZs and the yellow dashed circles represent the 7.50-GHz isofrequency contours of the light cone. The color indicates the amplitude of E z component in field maps and the amplitude of spatial Fourier transforms in spatial Fourier spectra, respectivelyCC BY · PubMed Central
Fig. 6 Topological protection of the edge state in a Z-shaped waveguide. a Schematic diagram of a Z-shaped topological waveguide formed between patterns A and patterns B. The corner angle α = 60°. b Simulated field map of E z component at 7.50 GHz. The green dashed rectangle denotes the region of the area 208 × 220 mm2 scanned in experiments. The color indicates the amplitude of E z component. The scale bar is 60 mm. c Measured field map of E z component at 7.50 GHz. The color indicates the amplitude of E z component. The scale bar is 40 mm
Fig. 6 Topological protection of the edge state in a Z-shaped waveguide. a Schematic diagram of a Z-shaped topological waveguide formed between patterns A and patterns B. The corner angle α = 60°. b Simulated field map of E z component at 7.50 GHz. The green dashed rectangle denotes the region of the area 208 × 220 mm2 scanned in experiments. The color indicates the amplitude of E z component. The scale bar is 60 mm. c Measured field map of E z component at 7.50 GHz. The color indicates the amplitude of E z component. The scale bar is 40 mmCC BY · PubMed Central

Verification

Claims the paper makes

14 Valid · 1 Not valid · 4 Not checked · 30 Own results and interpretations

14 more claims · 3 with their cited sources checked

Create a free account to see all 49 claims and to verify the 4 references still open.

See all claims — free account
  • It may state two separate claims as one. 27
  • Probably not a substantial claim. 4
  • The quote only partly states this claim. 1

Create a free account to see these claims.

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Citations

Cites

Show all 52 references

Cited by

See all 449

Metadata

Authors
Wu, X., Meng, Y., Tian, J., Huang, Y., Xiang, H., Han, D., & Wen, W.
Affiliations
  • Chongqing University (CN)
  • University of Hong Kong (HK)
Corresponding author
  • Han, Dezhuan
  • Wen, Weijia
Venue
Nature Communications
Published
2017-11-03
Volume
8
Issue
1
Pages
1304-1304
ISSN
2041-1723 (ISSN-L)
OpenAlex
W2600702133
Cited by
449
References
52
Citations by year
2026: 35 · 2025: 61 · 2024: 73 · 2023: 55 · 2022: 58 · 2021: 50 · 2020: 39 · 2019: 43 · 2018: 33 · 2017: 2
FWCI
15.69
Type
journal article
Language
en
Open access
Licence
Locations
  • Nature Communications (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • arXiv (Cornell University) (submittedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
  • Rare & Special e-Zone (The Hong Kong University of Science and Technology) (submittedVersion)
  • arXiv (Cornell University)
Funders
  • National Natural Science Foundation of China (91630205, 11574037)
  • Special Fund for Agro-scientific Research in the Public Interest (201303045)
Topics
  • Physical Sciences › Physics and Astronomy › Condensed Matter Physics › Topological Materials and Phenomena
  • Physical Sciences › Physics and Astronomy › Atomic and Molecular Physics, and Optics › Plasmonic and Surface Plasmon Research
  • Physical Sciences › Physics and Astronomy › Acoustics and Ultrasonics › Acoustic Wave Phenomena Research
Keywords
photonic topological insulators, valley-dependent transport, mirror symmetry breaking, microwave photonics, topological protection, domain walls

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

The claim verdicts this report counts are experimental: their accuracy is not yet measured.

A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).

A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).

Cited sources are checked with a language model’s help (gpt-6-sol).

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Direct observation of valley-polarized topological edge states in designer surface plasmon crystals. https://app.cochat.ai/papers/10.1038/s41467-017-01515-2
The paper
Wu, X., Meng, Y., Tian, J., Huang, Y., Xiang, H., Han, D., & Wen, W. (2017). Direct observation of valley-polarized topological edge states in designer surface plasmon crystals. Nature Communications. https://doi.org/10.1038/s41467-017-01515-2

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.