Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat
Cited by 223

The DOI matches its Crossref record; 6 of the 6 references it cites were found in a registry or an index.

Highly efficient oxygen evolution reaction via facile bubble transport realized by three-dimensionally stack-printed catalysts

Open access
Kim, Ye Ji, Lim, Ahyoun, Kim, Jong Min, Lim, Donghoon, Chae, Keun Hwa, Cho, Eugene N., Han, Hyeuk Jin, Jeon, Ki Ung, Kim, Moohyun, Lee, Gun Ho, Lee, Gyu Rac, Ahn, Hyun S., Park, Hyun S., Kim, Hyoungsoo, Kim, Jin Young, Jung, Yeon Sik · 2020 · Nature Communications

Abstract

Despite highly promising characteristics of three-dimensionally (3D) nanostructured catalysts for the oxygen evolution reaction (OER) in polymer electrolyte membrane water electrolyzers (PEMWEs), universal design rules for maximizing their performance have not been explored. Here we show that woodpile (WP)-structured Ir, consisting of 3D-printed, highly-ordered Ir nanowire building blocks, improve OER mass activity markedly. The WP structure secures the electrochemically active surface area (ECSA) through enhanced utilization efficiency of the extended surface area of 3D WP catalysts. Moreover, systematic control of the 3D geometry combined with theoretical calculations and various electrochemical analyses reveals that facile transport of evolved O 2 gas bubbles is an important contributor to the improved ECSA-specific activity. The 3D nanostructuring-based improvement of ECSA and ECSA-specific activity enables our well-controlled geometry to afford a 30-fold higher mass activity of the OER catalyst when used in a single-cell PEMWE than conventional nanoparticle-based catalysts.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1038/s41467-020-18686-0

Cites

6 of 6 references verified0 citation errors · 0 not checkable

Statistics

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 6 references

Research works printed but not linked: 40

  1. Pivovar, B. Catalysts for fuel cell transportation and hydrogen related uses. Nat. Catal. 2, 562 (2019). · DOI
  2. Detz, R., Reek, J. N. & Van Der Zwaan, B. The future of solar fuels: when could they become competitive? Energy Environ. Sci. 11, 1653–1669 (2018). · DOI · Paper page
  3. Carmo, M., Fritz, D. L., Mergel, J. & Stolten, D. A comprehensive review on PEM water electrolysis. Int. J. Hydrog. Energy 38, 4901–4934 (2013). · DOI · Paper page
  4. Lettenmeier, P. et al. Nanosized IrOx–Ir catalyst with relevant activity for anodes of proton exchange membrane electrolysis produced by a cost‐effective procedure. Angew. Chem. 128, 752–756 (2016). · DOI
  5. Seitz, L. C. et al. A highly active and stable IrOx/SrIrO3 catalyst for the oxygen evolution reaction. Science 353, 1011–1014 (2016). · DOI · Paper page
  6. Feng, Q. et al. A review of proton exchange membrane water electrolysis on degradation mechanisms and mitigation strategies. J. Power Sources 366, 33–55 (2017). · DOI · Paper page
  7. Choe, S. et al. Electrodeposited IrO2/Ti electrodes as durable and cost-effective anodes in high-temperature polymer-membrane-electrolyte water electrolyzers. Appl. Catal. B-Environ. 226, 289–294 (2018). · DOI
  8. Siracusano, S., Baglio, V., Van Dijk, N., Merlo, L. & Aricò, A. S. Enhanced performance and durability of low catalyst loading PEM water electrolyser based on a short-side chain perfluorosulfonic ionomer. Appl. Energy 192, 477–489 (2017). · DOI · Paper page
  9. Kim, Y.-T. et al. Balancing activity, stability and conductivity of nanoporous core-shell iridium/iridium oxide oxygen evolution catalysts. Nat. Commun. 8, 1449 (2017). · DOI · Paper page
  10. Pi, Y., Zhang, N., Guo, S., Guo, J. & Huang, X. Ultrathin laminar Ir superstructure as highly efficient oxygen evolution electrocatalyst in broad pH range. Nano lett. 16, 4424–4430 (2016). · DOI · Paper page
  11. Reier, T. et al. Molecular insight in structure and activity of highly efficient, low-Ir Ir–Ni oxide catalysts for electrochemical water splitting (OER). J. Am. Chem. Soc. 137, 13031–13040 (2015). · DOI · Paper page
  12. Kim, O.-H. et al. Ordered macroporous platinum electrode and enhanced mass transfer in fuel cells using inverse opal structure. Nat. Commun. 4, 2473 (2013). · DOI · Paper page
  13. Müller, A. The chemistry of nanomaterials: synthesis, properties and applications in 2 volumes. Vol. 2 (Wiley-VCH, 2004).
  14. Bernicke, M. et al. Iridium oxide coatings with templated porosity as highly active oxygen evolution catalysts: structure-activity relationships. ChemSusChem 8, 1908–1915 (2015). · DOI
  15. Alia, S. M., Shulda, S., Ngo, C., Pylypenko, S. & Pivovar, B. S. Iridium-based nanowires as highly active, oxygen evolution reaction electrocatalysts. ACS Catal. 8, 2111–2120 (2018). · DOI · Paper page
  16. Bessarabov, D., Wang, H., Li, H. & Zhao, N. PEM electrolysis for hydrogen production: principles and applications. (CRC press, 2016). · DOI
  17. Tang, C., Wang, H.-F. & Zhang, Q. Multiscale principles to boost reactivity in gas-involving energy electrocatalysis. Acc. Chem. Res. 51, 881–889 (2018). · DOI · Paper page
  18. Agmon, N. The grotthuss mechanism. Chem. Phys. Lett. 244, 456–462 (1995). · DOI · Paper page
  19. Jeong, J. W. et al. High-resolution nanotransfer printing applicable to diverse surfaces via interface-targeted adhesion switching. Nat. Comm. 5, 5387 (2014). · DOI · Paper page
  20. Pfeifer, V. et al. The electronic structure of iridium and its oxides. Surf. Interface Anal. 48, 261–273 (2016). · DOI · Paper page
  21. Smith, R. D. L., Sporinova, B., Fagan, R. D., Trudel, S. & Berlinguette, C. P. Facile photochemical preparation of amorphous iridium oxide films for water oxidation catalysis. Chem. Mater. 26, 1654–1659 (2014). · DOI · Paper page
  22. Minguzzi, A. et al. Easy accommodation of different oxidation states in iridium oxide nanoparticles with different hydration degree as water oxidation electrocatalysts. ACS Catal. 5, 5104–5115 (2015). · DOI
  23. Choy, J.-H., Kim, D.-K., Demazeau, G. & Jung, D.-Y. LIII-edge XANES study on unusually high valent iridium in a perovskite lattice. J. Phys. Chem. 98, 6258–6262 (1994). · doi:10.1021/j100076a005
  24. Abbott, D. F. et al. Iridium oxide for the oxygen evolution reaction: correlation between particle size, morphology, and the surface hydroxo layer from operando XAS. Chem. Mater. 28, 6591–6604 (2016). · DOI · Paper page
  25. Li, T. et al. Atomic-scale insights into surface species of electrocatalysts in three dimensions. Nat. Catal. 1, 300 (2018). · DOI · Paper page
  26. Grimaud, A. et al. Activation of surface oxygen sites on an iridium-based model catalyst for the oxygen evolution reaction. Nat. Energy 2, 16189 (2017). · DOI · Paper page
  27. Rincón, R. A. et al. Using cavity microelectrodes for electrochemical noise studies of oxygen-evolving catalysts. ChemSusChem 8, 560–566 (2015). · doi:10.1002/cssc.201402855
  28. Soleimani, M., Hill, R. J. & van de Ven, T. G. M. Capillary Force between Flexible Filaments. Langmuir 31, 8328–8334 (2015). · doi:10.1021/acs.langmuir.5b01351
  29. Aziz, H. & Tafreshi, H. V. Competing forces on a liquid bridge between parallel and orthogonal dissimilar fibers. Soft Matt 15, 6967–6977 (2019). · doi:10.1039/c9sm00489k
  30. Park, C. H. et al. Nanocrack-regulated self-humidifying membranes. Nature 532, 480 (2016). · DOI · Paper page
  31. Alia, S. M. et al. Activity and durability of iridium nanoparticles in the oxygen evolution reaction. J. Electrochem. Soc. 163, F3105–F3112 (2016). · DOI · Paper page
  32. Badwal, S., Giddey, S. & Ciacchi, F. Hydrogen and oxygen generation with polymer electrolyte membrane (PEM)-based electrolytic technology. Ionics 12, 7–14 (2006). · DOI
  33. Millet, P. et al. PEM water electrolyzers: from electrocatalysis to stack development. Int. J. Hydrog. Energy 35, 5043–5052 (2010). · DOI · Paper page
  34. Park, S. et al. Degradation of the ionic pathway in a PEM fuel cell cathode. J. Phys. Chem. C. 115, 22633–22639 (2011). · DOI
  35. Zeng, Y. et al. A cost-effective nanoporous ultrathin film electrode based on nanoporous gold/IrO2 composite for proton exchange membrane water electrolysis. J. Power Sources 342, 947–955 (2017). · DOI
  36. Geiger, S. et al. The stability number as a metric for electrocatalyst stability benchmarking. Nat. Catal. 1, 508 (2018). · DOI · Paper page
  37. Jovanovič, P. et al. Electrochemical dissolution of iridium and iridium oxide particles in acidic media: transmission electron microscopy, electrochemical flow cell coupled to inductively coupled plasma mass spectrometry, and X-ray absorption spectroscopy study. J. Am. Chem. Soc. 139, 12837–12846 (2017). · DOI · Paper page
  38. Danilovic, N. et al. Activity–stability trends for the oxygen evolution reaction on monometallic oxides in acidic environments. J. Phys. Chem. Lett. 5, 2474–2478 (2014). · DOI · Paper page
  39. Oh, H.-S., Nong, H. N., Reier, T., Gliech, M. & Strasser, P. Oxide-supported Ir nanodendrites with high activity and durability for the oxygen evolution reaction in acid PEM water electrolyzers. Chem. Sci. 6, 3321–3328 (2015). · DOI · Paper page
  40. Fujigaya, T. et al. A highly efficient and durable carbon nanotube-based anode electrocatalyst for water electrolyzers. J. Mater. Chem. A 5, 10584–10590 (2017). · doi:10.1039/c7ta01318c

Cited by

See all 223

Metadata

Authors
Kim, Y. J., Lim, A., Kim, J. M., Lim, D., Chae, K. H., Cho, E. N., Han, H. J., Jeon, K. U., Kim, M., Lee, G. H., Lee, G. R., Ahn, H. S., Park, H. S., Kim, H., Kim, J. Y., & Jung, Y. S.
Venue
Nature Communications
Published
2020-10-01
Volume
11
Issue
1
Pages
4921-4921
ISSN
2041-1723 (ISSN-L)
OpenAlex
W3089918156
Cited by
223
References
6
FWCI
4.29
Type
journal article
Language
en
Open access
gold
Licence
Funders
National Research Foundation of Korea (2013M3A6B1078874, 2019M3E6A1064736)

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Highly efficient oxygen evolution reaction via facile bubble transport realized by three-dimensionally stack-printed catalysts. https://app.cochat.ai/papers/10.1038/s41467-020-18686-0
The paper
Kim, Y. J., Lim, A., Kim, J. M., Lim, D., Chae, K. H., Cho, E. N., Han, H. J., Jeon, K. U., Kim, M., Lee, G. H., Lee, G. R., Ahn, H. S., Park, H. S., Kim, H., Kim, J. Y., & Jung, Y. S. (2020). Highly efficient oxygen evolution reaction via facile bubble transport realized by three-dimensionally stack-printed catalysts. Nature Communications. https://doi.org/10.1038/s41467-020-18686-0

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.