Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat

The DOI matches its Crossref record; 46 of the 46 references it cites were found in a registry or an index.

Triboelectric nanogenerator sensors for soft robotics aiming at digital twin applications

Open access

Abstract

Designing efficient sensors for soft robotics aiming at human machine interaction remains a challenge. Here, we report a smart soft-robotic gripper system based on triboelectric nanogenerator sensors to capture the continuous motion and tactile information for soft gripper. With the special distributed electrodes, the tactile sensor can perceive the contact position and area of external stimuli. The gear-based length sensor with a stretchable strip allows the continuous detection of elongation via the sequential contact of each tooth. The triboelectric sensory information collected during the operation of soft gripper is further trained by support vector machine algorithm to identify diverse objects with an accuracy of 98.1%. Demonstration of digital twin applications, which show the object identification and duplicate robotic manipulation in virtual environment according to the real-time operation of the soft-robotic gripper system, is successfully created for virtual assembly lines and unmanned warehouse applications.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1038/s41467-020-19059-3

Cites

46 of 46 references verified0 citation errors · 0 not checkable

Statistics

Figures

Fig. 1 Construction drawing of the low-cost triboelectric nanogenerator (TENG) for soft gripper and its digital twin applications. a The as-fabricated TENG sensors and their basic structures. (i) The length TENG (L-TENG) sensor and (ii) the tactile TENG (T-TENG) sensor. b The soft gripper integrated with TENG sensors. c The intelligent sensory data processing strategies. E1 to E4, and EL represent the electrodes in the T-TENG sensor. d The digital twin applications based on artificial intelligence of things (AIoT) sensory system.
Fig. 1 Construction drawing of the low-cost triboelectric nanogenerator (TENG) for soft gripper and its digital twin applications. a The as-fabricated TENG sensors and their basic structures. (i) The length TENG (L-TENG) sensor and (ii) the tactile TENG (T-TENG) sensor. b The soft gripper integrated with TENG sensors. c The intelligent sensory data processing strategies. E1 to E4, and EL represent the electrodes in the T-TENG sensor. d The digital twin applications based on artificial intelligence of things (AIoT) sensory system.CC BY · PubMed Central
Fig. 2 Working mechanism and characterization of the tactile TENG (T-TENG) sensor. a Operation mechanism of the T-TENG sensor used for various functions including (i) contact position detection, (ii) sliding detection, and (iii) contact mode recognition. b Schematic diagram of the distribution of the electrodes. The short electrodes are marked as E1 to E4 and the long electrode is marked as EL. c Output signals of E1 to E4 by tapping different positions across the T-TENG sensor patch in point-contact mode. d Voltage ratio analysis of the result in c, where Vi means the voltage of the ith electrode. Sliding test at the speed of e 40 and f 65 mm·s−1. g Output signals of EL when tapped with different contact areas.
Fig. 2 Working mechanism and characterization of the tactile TENG (T-TENG) sensor. a Operation mechanism of the T-TENG sensor used for various functions including (i) contact position detection, (ii) sliding detection, and (iii) contact mode recognition. b Schematic diagram of the distribution of the electrodes. The short electrodes are marked as E1 to E4 and the long electrode is marked as EL. c Output signals of E1 to E4 by tapping different positions across the T-TENG sensor patch in point-contact mode. d Voltage ratio analysis of the result in c, where Vi means the voltage of the ith electrode. Sliding test at the speed of e 40 and f 65 mm·s−1. g Output signals of EL when tapped with different contact areas.CC BY · PubMed Central
Fig. 3 Working mechanism of the length TENG (L-TENG) sensor and the real-time verification in HMIs. a Working mechanism of L-TENG sensor. b Stretching output of the L-TENG sensor at various speeds. c The photograph of the HMIs with L-TENG sensor and tactile TENG (T-TENG) sensor integrated on a nitrile glove. d The real-time signals when the robotic hand is controlled to bend to 30° and return to its original position. e The real-time signals of controlling the robotic finger to bend to different angles in one-step mode and step-by-step mode. f The photographs of the actual hand gestures and their corresponding robotic hand motions. (i) The nitrile glove with sensors. (ii–v) The robotic hand deforms to 30° and returns to 0°. (vi, vii) The robotic hand with 60°, 90° bending.
Fig. 3 Working mechanism of the length TENG (L-TENG) sensor and the real-time verification in HMIs. a Working mechanism of L-TENG sensor. b Stretching output of the L-TENG sensor at various speeds. c The photograph of the HMIs with L-TENG sensor and tactile TENG (T-TENG) sensor integrated on a nitrile glove. d The real-time signals when the robotic hand is controlled to bend to 30° and return to its original position. e The real-time signals of controlling the robotic finger to bend to different angles in one-step mode and step-by-step mode. f The photographs of the actual hand gestures and their corresponding robotic hand motions. (i) The nitrile glove with sensors. (ii–v) The robotic hand deforms to 30° and returns to 0°. (vi, vii) The robotic hand with 60°, 90° bending.CC BY · PubMed Central
Fig. 4 Verification of the soft actuator integrated with TENG sensors and the results of machine learning training. a The operation mechanism of the soft actuator. b The configuration of the device during the characterization of length TENG (L-TENG) sensor. c The output peak numbers from L-TENG sensor versus the bending degrees of the soft actuator with increasing air pressure. d The diagrams of the gripper griping various objects with different contact positions to test T-TENG sensor. (i–iii) Gripping orange in different positions, (iv) gripping egg, (v–vii) gripping apple in different positions, and (viii) gripping turnip. e The output signals of tactile TENG (T-TENG) sensor for gripping an apple in various contact positions. f The output of long electrode (EL) when gripping various objects with different curvatures. g The configuration of the gripper and sensors. h 3D plots of the robotic sensor outputs responding to different objects (apple, cube, long can (L-Can), orange, short can (S-Can), and tape). i The confusion map for machine learning outcome.
Fig. 4 Verification of the soft actuator integrated with TENG sensors and the results of machine learning training. a The operation mechanism of the soft actuator. b The configuration of the device during the characterization of length TENG (L-TENG) sensor. c The output peak numbers from L-TENG sensor versus the bending degrees of the soft actuator with increasing air pressure. d The diagrams of the gripper griping various objects with different contact positions to test T-TENG sensor. (i–iii) Gripping orange in different positions, (iv) gripping egg, (v–vii) gripping apple in different positions, and (viii) gripping turnip. e The output signals of tactile TENG (T-TENG) sensor for gripping an apple in various contact positions. f The output of long electrode (EL) when gripping various objects with different curvatures. g The configuration of the gripper and sensors. h 3D plots of the robotic sensor outputs responding to different objects (apple, cube, long can (L-Can), orange, short can (S-Can), and tape). i The confusion map for machine learning outcome.CC BY · PubMed Central
Fig. 5 Enhanced object recognition system via machine learning technology. a The channel arrangement of integrated sensors for collecting data. b The 16 objects to be gripped and recognized. c 3D plots of the robotic sensor outputs corresponding to different objects. d The confusion map for machine learning outcome of 16 objects with 15 channels. The comparison of confusion maps for machine learning outcomes of sphere objects with e all of 15 channels on both the length TENG (L-TENG) and tactile TENG (T-TENG) sensors, f pure L-TENG sensors (3 channels), and g pure T-TENG sensors (12 channels).
Fig. 5 Enhanced object recognition system via machine learning technology. a The channel arrangement of integrated sensors for collecting data. b The 16 objects to be gripped and recognized. c 3D plots of the robotic sensor outputs corresponding to different objects. d The confusion map for machine learning outcome of 16 objects with 15 channels. The comparison of confusion maps for machine learning outcomes of sphere objects with e all of 15 channels on both the length TENG (L-TENG) and tactile TENG (T-TENG) sensors, f pure L-TENG sensors (3 channels), and g pure T-TENG sensors (12 channels).CC BY · PubMed Central
Fig. 6 The length TENG (L-TENG) and tactile TENG (T-TENG) sensors integrated digital twin unmanned warehouse system with machine learning (ML) technology. a The process flows from sensory information collection to ML training and real-time prediction in digital twin system, e.g., digital twin assembly line. The principal component analysis (PCA) is implemented to extract the data feature for ML training based on support vector machine (SVM). b Real-time gripped object prediction system. c The system interface integrated with object recognition and its digital twin warehouse application.
Fig. 6 The length TENG (L-TENG) and tactile TENG (T-TENG) sensors integrated digital twin unmanned warehouse system with machine learning (ML) technology. a The process flows from sensory information collection to ML training and real-time prediction in digital twin system, e.g., digital twin assembly line. The principal component analysis (PCA) is implemented to extract the data feature for ML training based on support vector machine (SVM). b Real-time gripped object prediction system. c The system interface integrated with object recognition and its digital twin warehouse application.CC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

1 retracted

Show all 46 references

Cited by

See all 695

Metadata

Authors
Jin, T., Sun, Z., Li, L., Zhang, Q., Zhu, M., Zhang, Z., Yuan, G., Chen, T., Tian, Y., Hou, X., & Lee, C.
Affiliations
  • Shanghai University (CN)
  • National University of Singapore (SG)
  • Soochow University (CN)
  • Harbin Institute of Technology (CN)
Corresponding author
  • Tian, Yingzhong
  • Hou, Xuyan
  • Lee, Chengkuo
Venue
Nature Communications
Published
2020-10-23
Volume
11
Issue
1
Pages
5381-5381
ISSN
2041-1723 (ISSN-L)
OpenAlex
W3094212051
Cited by
695
References
46
Citations by year
2026: 87 · 2025: 120 · 2024: 139 · 2023: 141 · 2022: 132 · 2021: 73 · 2020: 3
FWCI
27.39
Type
journal article
Language
en
Open access
Licence
Locations
  • Nature Communications (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • National University of Singapore (submittedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
Funders
  • National University of Singapore (R263501012133, 2017‐01)
  • National Natural Science Foundation of China (51705098, 61673287, 201701, and 51705098, 61973207, 2019YFB2004800)
  • National Key Research and Development Program of China (2019YFB1310901, 2019YFB2004800)
Topics
  • Physical Sciences › Engineering › Biomedical Engineering › Advanced Sensor and Energy Harvesting Materials
  • Physical Sciences › Engineering › Biomedical Engineering › Soft Robotics and Applications
  • Physical Sciences › Engineering › Control and Systems Engineering › Robot Manipulation and Learning
Keywords
triboelectric nanogenerator, soft robotics, soft gripper, tactile sensing, digital twin, object recognition, support vector machine, stretchable electrodes, human-robot interaction

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Triboelectric nanogenerator sensors for soft robotics aiming at digital twin applications. https://app.cochat.ai/papers/10.1038/s41467-020-19059-3
The paper
Jin, T., Sun, Z., Li, L., Zhang, Q., Zhu, M., Zhang, Z., Yuan, G., Chen, T., Tian, Y., Hou, X., & Lee, C. (2020). Triboelectric nanogenerator sensors for soft robotics aiming at digital twin applications. Nature Communications. https://doi.org/10.1038/s41467-020-19059-3

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.