The DOI matches its Crossref record; 22 of the 22 references it cites were found in a registry or an index.
Designing tailored combinations of structural units in polymer dielectrics for high-temperature capacitive energy storage
Open accessAbstract
Many mainstream dielectric energy storage technologies in the emergent applications, such as renewable energy, electrified transportations and advanced propulsion systems, are usually required to operate under harsh-temperature conditions. However, excellent capacitive performance and thermal stability tend to be mutually exclusive in the current polymer dielectric materials and applications. Here, we report a strategy to tailor structural units for the design of high-temperature polymer dielectrics. A library of polyimide-derived polymers from diverse combinations of structural units are predicted, and 12 representative polymers are synthesized for direct experimental investigation. This study provides important insights into decisive structural factors necessary to achieve robust and stable dielectrics with high energy storage capabilities at elevated temperature. We also find that the high-temperature insulation performance would experience diminishing marginal utility as the bandgap increases beyond a critical point, which is strongly correlated to the dihedral angle between neighboring planes of conjugation in these polymers. By experimentally testing the optimized and predicted structures, an increased energy storage at temperatures up to 250 °C is observed. We discuss the possibility for this strategy to be generally applied to other polymer dielectrics to achieve further performance enhancement.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Ab‐initio simulations of materials using VASP: Density‐functional theory and beyond
Hafner, J. (2008) · Journal of Computational Chemistry · doi:10.1002/jcc.21057 · Cited by 5,192
Flexible high-temperature dielectric materials from polymer nanocomposites
Li, Q., Chen, L., Gadinski, M. R., Zhang, S., Zhang, G., Li, H. U., Iagodkine, E., Haque, A., Chen, L.-Q., Jackson, T. N., et al. (2015) · Nature · doi:10.1038/nature14647 · Cited by 2,133
Self-citationA Review on Conduction Mechanisms in Dielectric Films
Chiu, F.-C. (2014) · Advances in Materials Science and Engineering · doi:10.1155/2014/578168 · Cited by 1,574
High-Temperature Dielectric Materials for Electrical Energy Storage
Li, Q., Yao, F.-Z., Liu, Y., Zhang, G., Wang, H., & Wang, Q. (2018) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070317-124435 · Cited by 881
Self-citationDielectric polymers for high-temperature capacitive energy storage
Li, H., Zhou, Y., Liu, Y., Li, L., Liu, Y., & Wang, Q. (2021) · Chemical Society Reviews · doi:10.1039/d0cs00765j · Cited by 713
Yuan, C., Zhou, Y., Zhu, Y., Liang, J., Wang, S., Peng, S., Li, Y., Cheng, S., Yang, M., Hu, J., et al. (2020) · Nature Communications · doi:10.1038/s41467-020-17760-x · Cited by 690
Self-citationState of the art of high temperature power electronics
Buttay, C., Planson, D., Allard, B., Bergogne, D., Bevilacqua, P., Joubert, C., Lazar, M., Martin, C., Morel, H., Tournier, D., et al. (2011) · Materials Science and Engineering: B · doi:10.1016/j.mseb.2010.10.003 · Cited by 432
Accurate defect levels obtained from the HSE06 range-separated hybrid functional
Deák, P., Aradi, B., Frauenheim, T., Janzén, E., & Gali, A. (2010) · Physical Review B · doi:10.1103/physrevb.81.153203 · Cited by 409
Polymer Capacitor Dielectrics for High Temperature Applications
Ho, J. S., & Greenbaum, S. G. (2018) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.8b07705 · Cited by 404
Materials simulations using VASP—a quantum perspective to materials science
Hafner, J. (2007) · Computer Physics Communications · doi:10.1016/j.cpc.2007.02.045 · Cited by 400
Cited by
Polymer nanocomposite dielectrics for capacitive energy storage
Yang, M., Guo, M., Xu, E., Ren, W., Wang, D., Li, S., Zhang, S., Nan, C.-W., & Shen, Y. (2024) · Nature Nanotechnology · doi:10.1038/s41565-023-01541-w · Cited by 423
Self-citation
Metadata
- Authors
- Wang, R., Zhu, Y., Fu, J., Yang, M., Ran, Z., Li, J., Li, M., Hu, J., He, J., & Li, Q.
- Venue
- Nature Communications
- Published
- 2023-04-26
- Volume
- 14
- Issue
- 1
- Pages
- 2406-2406
- ISSN
- 2041-1723 (ISSN-L)
- OpenAlex
- W4367048700
- Cited by
- 278
- References
- 22
- FWCI
- 20.39
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Designing tailored combinations of structural units in polymer dielectrics for high-temperature capacitive energy storage. https://app.cochat.ai/papers/10.1038/s41467-023-38145-w
- The paper
- Wang, R., Zhu, Y., Fu, J., Yang, M., Ran, Z., Li, J., Li, M., Hu, J., He, J., & Li, Q. (2023). Designing tailored combinations of structural units in polymer dielectrics for high-temperature capacitive energy storage. Nature Communications. https://doi.org/10.1038/s41467-023-38145-w
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.