CoChat

Reconfigurable continuously-coupled 3D photonic circuit for Boson Sampling experiments

Open access

The DOI matches its Crossref record; 79 of the 79 references it cites were found in a registry or an index.

Abstract

Boson Sampling is a computational paradigm representing one of the most viable and pursued approaches to demonstrate the regime of quantum advantage. Recent results have shown significant technological leaps in single-photon generation and detection, leading to progressively larger instances of Boson Sampling experiments in different photonic systems. However, a crucial requirement for a fully-fledged platform solving this problem is the capability of implementing large-scale interferometers, that must simultaneously exhibit low losses, high degree of reconfigurability and the realization of arbitrary transformations. In this work, we move a step forward in this direction by demonstrating the adoption of a compact and reconfigurable 3D-integrated platform for photonic Boson Sampling. We perform 3- and 4-photon experiments by using such platform, showing the possibility of programming the circuit to implement a large number of unitary transformations. These results show that such compact and highly-reconfigurable layout can be scaled up to experiments with larger number of photons and modes, and can provide a viable direction for hybrid computing with photonic processors.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1038/s41534-022-00568-6

Cites

79 of 79 references verified0 citation errors · 0 not checkable

Statistics

Figures

Fig. 1 Boson Sampling in a 3D continuous-coupling integrated device. a Boson Sampling (BS) and the most recent variants, ( b ) Scattershot Boson Sampling (SBS) and ( c ) Gaussian Boson Sampling GBS). The corresponding computational problems require sampling from the output distribution using different input quantum states of light, such as Fock states in BS, two-mode squeezed vacuum states in SBS and singlemode squeezed vacuum states in GBS. The common element among the schemes is the optical random circuit, described by the unitary evolution U . d The most widely adopted decomposition of the operator U is via a network of beamsplitters, with splitting ratios Sij , and phaseshifts ϕ i (left); an alternative implementation exploits continuous-coupling by evanescent waves among waveguides (right) depending on the coupling coef fi cients cij and the propagation constants ki , where both may vary along the direction z . e Overview of the recon fi gurable 3D integrated photonic chip, realized through the femtosecond laser writing technique. The device is composed by 32 optical-modes arranged in a triangular lattice, as showed in the inset reporting the transverse section of the sample. In red we have highlighted the input modes employed in the 3- and 4-photon experiment. The transformation U is controlled by the 16 resistors fabricated on top of the glass sample. The second inset shows the top view of the electrical circuits that controls the currents I i applied to the resistors.
Fig. 1 Boson Sampling in a 3D continuous-coupling integrated device. a Boson Sampling (BS) and the most recent variants, ( b ) Scattershot Boson Sampling (SBS) and ( c ) Gaussian Boson Sampling GBS). The corresponding computational problems require sampling from the output distribution using different input quantum states of light, such as Fock states in BS, two-mode squeezed vacuum states in SBS and singlemode squeezed vacuum states in GBS. The common element among the schemes is the optical random circuit, described by the unitary evolution U . d The most widely adopted decomposition of the operator U is via a network of beamsplitters, with splitting ratios Sij , and phaseshifts ϕ i (left); an alternative implementation exploits continuous-coupling by evanescent waves among waveguides (right) depending on the coupling coef fi cients cij and the propagation constants ki , where both may vary along the direction z . e Overview of the recon fi gurable 3D integrated photonic chip, realized through the femtosecond laser writing technique. The device is composed by 32 optical-modes arranged in a triangular lattice, as showed in the inset reporting the transverse section of the sample. In red we have highlighted the input modes employed in the 3- and 4-photon experiment. The transformation U is controlled by the 16 resistors fabricated on top of the glass sample. The second inset shows the top view of the electrical circuits that controls the currents I i applied to the resistors.CC-BY · From the PDF
Fig. 2 Scheme of the experimental apparatus. a A parametric down-conversion process in a Beta-Barium Borate crystal generates one- and two-pair photon states. Generation in the single-pair regime is employed for the unitary reconstruction procedures, while 3- and 4-photon states are employed for experiments in the Boson Sampling framework. Photons are prepared in their polarization and temporal degrees of freedom before coupling in the input single-mode fi ber array. After evolution, photons are fi nally detected via a set of 32 single-photon avalanche photodiodes connected to a 32-channel time-to-digital converter for the reconstruction of the coincidence pattern. b Schematic of the in- and out-coupling of the single photons with the 3D photonic circuit: one- and two-dimensional fi ber arrays connect to the fan-in and fan-out sections of the circuit. Legend: BBO beta-barium borate crystal, BPF band-pass fi lter, HWP half-wave plate, PBS polarizing beamsplitter, PC polarization controller, DL delay line, PS power supply, TDC time-to-digital converter, 1D-/2D-FA one-/two-dimensional fi ber array, FI fan-in, FO fan-out, CCWL continuously-coupled waveguide lattice, RS resistors.
Fig. 2 Scheme of the experimental apparatus. a A parametric down-conversion process in a Beta-Barium Borate crystal generates one- and two-pair photon states. Generation in the single-pair regime is employed for the unitary reconstruction procedures, while 3- and 4-photon states are employed for experiments in the Boson Sampling framework. Photons are prepared in their polarization and temporal degrees of freedom before coupling in the input single-mode fi ber array. After evolution, photons are fi nally detected via a set of 32 single-photon avalanche photodiodes connected to a 32-channel time-to-digital converter for the reconstruction of the coincidence pattern. b Schematic of the in- and out-coupling of the single photons with the 3D photonic circuit: one- and two-dimensional fi ber arrays connect to the fan-in and fan-out sections of the circuit. Legend: BBO beta-barium borate crystal, BPF band-pass fi lter, HWP half-wave plate, PBS polarizing beamsplitter, PC polarization controller, DL delay line, PS power supply, TDC time-to-digital converter, 1D-/2D-FA one-/two-dimensional fi ber array, FI fan-in, FO fan-out, CCWL continuously-coupled waveguide lattice, RS resistors.CC-BY · From the PDF
Fig. 3 Experimental reconstruction of the [3 × 32] sub-matrices and comparison with the Haar-random matrices. a Experimental reconstruction of the squared moduli ρ 2 ij (red) and phases θ ij (blue) for three input ports of the recon fi gurable photonic chip, highlighted by the labels in the fi gure. The chip is set on a random con fi guration of currents. Each input port represents a row of the unitary transformation applied to the input state. b , c Comparison of the phases and the squared moduli frequency distribution respectively, between 15 experimentally reconstructed sub-matrices (blue) and 15 [3 × 32] sub-matrices sampled from the Haar-random unitaries (red). d Distribution of the similarity between the squared moduli of two columns of different sub-matrices. We repeated the measurement for ~200 different con fi gurations of the currents in the chip. In red it is shown the theoretical similarity distribution obtained by sampling columns distributed according to the Haar measure. The overlap between the two histograms is the 62.4% of the total area.
Fig. 3 Experimental reconstruction of the [3 × 32] sub-matrices and comparison with the Haar-random matrices. a Experimental reconstruction of the squared moduli ρ 2 ij (red) and phases θ ij (blue) for three input ports of the recon fi gurable photonic chip, highlighted by the labels in the fi gure. The chip is set on a random con fi guration of currents. Each input port represents a row of the unitary transformation applied to the input state. b , c Comparison of the phases and the squared moduli frequency distribution respectively, between 15 experimentally reconstructed sub-matrices (blue) and 15 [3 × 32] sub-matrices sampled from the Haar-random unitaries (red). d Distribution of the similarity between the squared moduli of two columns of different sub-matrices. We repeated the measurement for ~200 different con fi gurations of the currents in the chip. In red it is shown the theoretical similarity distribution obtained by sampling columns distributed according to the Haar measure. The overlap between the two histograms is the 62.4% of the total area.CC-BY · From the PDF
Fig. 4 Boson Sampling data. Validation of the 3-photon (blue points in ( a ) and 4-photon (blue points in ( b ) Boson Sampling experiments against the uniform sampler hypothesis (green point in a , b ). c , d Validation against the distinguishable photons sampler of 3- and 4-photon events. The test is applied using the same reconstructed sub-matrix in ( a ) and ( b ). The distinguishable samples (red points) were collected by adjusting the relative time delay between the input photons. e Histograms of simulated 3-photon slopes for counter W (normalized to the slopes of distinguishable particles data) in the case of validation against the uniform sampler using a random extracted U transformation, i.e. U matrices that do not match the actual operation implemented in the circuit. The obtained slopes of the 10 different 3-photon BS experiments are highlighted by the arrows (and by the corresponding stars). The experimental points were validated with the reconstructed sub-matrix retrieved from the two-photon reconstruction. All the experimental slopes values are in the positive range and far from the histograms average, thus showing the correct validation of the performed experiment. In ( f ), we performed the same analysis for the validation against the distinguishable photons hypothesis.
Fig. 4 Boson Sampling data. Validation of the 3-photon (blue points in ( a ) and 4-photon (blue points in ( b ) Boson Sampling experiments against the uniform sampler hypothesis (green point in a , b ). c , d Validation against the distinguishable photons sampler of 3- and 4-photon events. The test is applied using the same reconstructed sub-matrix in ( a ) and ( b ). The distinguishable samples (red points) were collected by adjusting the relative time delay between the input photons. e Histograms of simulated 3-photon slopes for counter W (normalized to the slopes of distinguishable particles data) in the case of validation against the uniform sampler using a random extracted U transformation, i.e. U matrices that do not match the actual operation implemented in the circuit. The obtained slopes of the 10 different 3-photon BS experiments are highlighted by the arrows (and by the corresponding stars). The experimental points were validated with the reconstructed sub-matrix retrieved from the two-photon reconstruction. All the experimental slopes values are in the positive range and far from the histograms average, thus showing the correct validation of the performed experiment. In ( f ), we performed the same analysis for the validation against the distinguishable photons hypothesis.CC-BY · From the PDF

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 79 references

Cited by

See all 51

Metadata

Authors
Hoch, F., Piacentini, S., Giordani, T., Tian, Z.-N., Iuliano, M., Esposito, C., Camillini, A., Carvacho, G., Ceccarelli, F., Spagnolo, N., Crespi, A., Sciarrino, F., & Osellame, R.
Affiliations
  • Sapienza University of Rome (IT)
  • Istituto di Fotonica e Nanotecnologie (IT)
  • Jilin University (CN)
Corresponding author
  • Sciarrino, Fabio
  • Osellame, Roberto
Venue
npj Quantum Information
Published
2022-05-12
Volume
8
Issue
1
ISSN
2056-6387 (ISSN-L)
OpenAlex
W4280631776
Cited by
51
References
79
Citations by year
2026: 7 · 2025: 8 · 2024: 16 · 2023: 12 · 2022: 8
FWCI
3.62
Type
journal article
Language
en
Open access
Licence
Locations
  • npj Quantum Information (publishedVersion, cc-by)
  • arXiv (Cornell University) (submittedVersion)
  • Virtual Community of Pathological Anatomy (University of Castilla La Mancha) (submittedVersion, cc-by)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
  • IRIS Research product catalog (Sapienza University of Rome) (submittedVersion, cc-by)
  • arXiv (Cornell University)
Funders
  • EC | Horizon 2020 Framework Programme (899544, 742745)
  • Ministero dell'Istruzione, dell'Università e della Ricerca (2017SRNBRK)
Topics
  • Physical Sciences › Computer Science › Artificial Intelligence › Quantum Computing Algorithms and Architecture
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Photonic and Optical Devices
  • Physical Sciences › Physics and Astronomy › Atomic and Molecular Physics, and Optics › Quantum Information and Cryptography
Keywords
boson sampling, reconfigurable photonic circuits, quantum advantage, photonic processors, hybrid quantum computing, multiphoton interference

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Reconfigurable continuously-coupled 3D photonic circuit for Boson Sampling experiments. https://app.cochat.ai/papers/10.1038/s41534-022-00568-6
The paper
Hoch, F., Piacentini, S., Giordani, T., Tian, Z.-N., Iuliano, M., Esposito, C., Camillini, A., Carvacho, G., Ceccarelli, F., Spagnolo, N., Crespi, A., Sciarrino, F., & Osellame, R. (2022). Reconfigurable continuously-coupled 3D photonic circuit for Boson Sampling experiments. npj Quantum Information. https://doi.org/10.1038/s41534-022-00568-6

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.