The DOI matches its Crossref record; 54 of the 58 references it cites were found in a registry or an index.
Morphable 3D mesostructures and microelectronic devices by multistable buckling mechanics
Open accessAbstract
Three-dimensional (3D) structures capable of reversible transformations in their geometrical layouts have important applications across a broad range of areas. Most morphable 3D systems rely on concepts inspired by origami/kirigami or techniques of 3D printing with responsive materials. The development of schemes that can simultaneously apply across a wide range of size scales and with classes of advanced materials found in state-of-the-art microsystem technologies remains challenging. Here, we introduce a set of concepts for morphable 3D mesostructures in diverse materials and fully formed planar devices spanning length scales from micrometres to millimetres. The approaches rely on elastomer platforms deformed in different time sequences to elastically alter the 3D geometries of supported mesostructures via nonlinear mechanical buckling. Over 20 examples have been experimentally and theoretically investigated, including mesostructures that can be reshaped between different geometries as well as those that can morph into three or more distinct states. An adaptive radiofrequency circuit and a concealable electromagnetic device provide examples of functionally reconfigurable microelectronic devices.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Notably, 3D flexible electronics maintain conductivity while gaining an extra dimension and thus more sophisticated functions that 2D electronics do not offer (Figure 3E and 3F).[70–72]”
From Flexible Electronics and Devices as Human–Machine Interfaces for Medical Robotics (2022) · cites this paper as [70]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027
The development and application of optogenetics
Fenno, L., Yizhar, O., & Deisseroth, K. (2011) · Annual Review of Neuroscience · doi:10.1146/annurev-neuro-061010-113817 · Cited by 1,822
Transfer printing by kinetic control of adhesion to an elastomeric stamp
Meitl, M. A., Zhu, Z., Kumar, V., Lee, K. J., Feng, X., Huang, Y. Y., Adesida, I., Nuzzo, R. G., & Rogers, J. A. (2005) · Nature Materials · doi:10.1038/nmat1532 · Cited by 1,553
Self-citationInjectable, Cellular-Scale Optoelectronics with Applications for Wireless Optogenetics
Kim, T.-I., McCall, J. G., Jung, Y. H., Huang, X., Siuda, E. R., Li, Y., Song, J., Song, Y. M., Pao, H. A., Kim, R.-H., et al. (2013) · Science · doi:10.1126/science.1232437 · Cited by 1,174
Self-citationGeometry of Miura-folded metamaterials
Schenk, M., & Guest, S. D. (2013) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1217998110 · Cited by 1,032
Using origami design principles to fold reprogrammable mechanical metamaterials
Silverberg, J. L., Evans, A. A., McLeod, L., Hayward, R. C., Hull, T., Santangelo, C. D., & Cohen, I. (2014) · Science · doi:10.1126/science.1252876 · Cited by 1,011
Multistable Architected Materials for Trapping Elastic Strain Energy
Shan, S., Kang, S. H., Raney, J. R., Wang, P., Fang, L., Candido, F., Lewis, J. A., & Bertoldi, K. (2015) · Advanced Materials · doi:10.1002/adma.201501708 · Cited by 1,005
A method for building self-folding machines
Felton, S. M., Tolley, M. T., Demaine, E. D., Rus, D. L., & Wood, R. J. (2014) · Science · doi:10.1126/science.1252610 · Cited by 980
Xu, S. H., Yan, Z., Jang, K., Huang, W., Fu, H., Kim, J., Wei, Z., Flavin, M. T., McCracken, J. M., Wang, R., et al. (2015) · Science · doi:10.1126/science.1260960 · Cited by 934
Self-citationDesigning Responsive Buckled Surfaces by Halftone Gel Lithography
Kim, J., Hanna, J. A., Byun, M., Santangelo, C. D., & Hayward, R. C. (2012) · Science · doi:10.1126/science.1215309 · Cited by 873
Cited by
Sorted by citations
Printing ferromagnetic domains for untethered fast-transforming soft materials
Kim, Y., Yuk, H., Zhao, R. R., Chester, S. A., & Zhao, X. (2018) · Nature · doi:10.1038/s41586-018-0185-0 · Cited by 2,231
Advances in 4D Printing: Materials and Applications
Kuang, X., Roach, D. J., Wu, J., Hamel, C. M., Ding, Z., Wang, T., Dunn, M. L., & Qi, H. J. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201805290 · Cited by 1,095
Magnetic Soft Materials and Robots
Kim, Y., & Zhao, X. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00481 · Cited by 920
Magnetic Shape Memory Polymers with Integrated Multifunctional Shape Manipulation
Ze, Q., Kuang, X., Wu, S., Wong, J., Montgomery, S. M., Zhang, R., Kovitz, J. M., Yang, F., Qi, H. J., & Zhao, R. R. (2019) · Advanced Materials · doi:10.1002/adma.201906657 · Cited by 743
Mechanical design and multifunctional applications of chiral mechanical metamaterials: A review
Wu, W., Hu, W., Qian, G., Liao, H., Xu, X., & Berto, F. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.107950 · Cited by 746
Stretchable Electronics Based on PDMS Substrates
Qi, D., Zhang, K., Tian, G., Jiang, B., & Huang, Y. (2020) · Advanced Materials · doi:10.1002/adma.202003155 · Cited by 672
Self-citationFlexible Electronics and Devices as Human–Machine Interfaces for Medical Robotics
Heng, W., Solomon, S., & Gao, W. (2022) · Advanced Materials · doi:10.1002/adma.202107902 · Cited by 609
Choi, S., Han, S. I., Kim, D., Hyeon, T., & Kim, D. (2018) · Chemical Society Reviews · doi:10.1039/c8cs00706c · Cited by 598
3D Graphene Materials: From Understanding to Design and Synthesis Control
Sun, Z., Fang, S., & Hu, Y. H. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.0c00083 · Cited by 551
Nanomagnetic encoding of shape-morphing micromachines
Cui, J., Huang, T., Luo, Z., Testa, P., Gu, H., Chen, X., Nelson, B. J., & Heyderman, L. J. (2019) · Nature · doi:10.1038/s41586-019-1713-2 · Cited by 477
Han, M., Wang, H., Yang, Y., Liang, C., Bai, W., Yan, Z., Li, H., Xue, Y., Wang, X., Akar, B., et al. (2019) · Nature Electronics · doi:10.1038/s41928-018-0189-7 · Cited by 472
Self-citationOrganic crystalline materials in flexible electronics
Wang, Y., Sun, L., Wang, C., Yang, F., Ren, X., Zhang, X., Dong, H., & Hu, W. (2018) · Chemical Society Reviews · doi:10.1039/c8cs00406d · Cited by 442
Mechanically‐Guided Structural Designs in Stretchable Inorganic Electronics
Xue, Z., Song, H., Rogers, J. A., Zhang, Y., & Huang, Y. Y. (2019) · Advanced Materials · doi:10.1002/adma.201902254 · Cited by 319
Self-citationResponsive materials architected in space and time
Xia, X., Spadaccini, C. M., & Greer, J. R. (2022) · Nature Reviews Materials · doi:10.1038/s41578-022-00450-z · Cited by 317
Spinning-enabled wireless amphibious origami millirobot
Ze, Q., Wu, S., Dai, J., Leanza, S., Ikeda, G., Yang, P. C.-M., Iaccarino, G., & Zhao, R. R. (2022) · Nature Communications · doi:10.1038/s41467-022-30802-w · Cited by 286
Guided transition waves in multistable mechanical metamaterials
Jin, L., Khajehtourian, R., Mueller, J., Rafsanjani, A., Tournat, V., Bertoldi, K., & Kochmann, D. M. (2020) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1913228117 · Cited by 279
Compliant and stretchable thermoelectric coils for energy harvesting in miniature flexible devices
Nan, K., Kang, S. D., Li, K., Yu, K. J., Zhu, F., Wang, J., Dunn, A. C., Zhou, C., Xie, Z., Agne, M. T., et al. (2018) · Science Advances · doi:10.1126/sciadv.aau5849 · Cited by 283
Self-citationMechanical metamaterials based on origami and kirigami
Zhai, Z., Wu, L., & Jiang, H. (2021) · Applied Physics Reviews · doi:10.1063/5.0051088 · Cited by 278
Mechanoresponsive Polymerized Liquid Metal Networks
Thrasher, C. J., Farrell, Z. J., Morris, N. J., Willey, C. L., & Tabor, C. E. (2019) · Advanced Materials · doi:10.1002/adma.201903864 · Cited by 258
Electrochemically reconfigurable architected materials
Xia, X., Afshar, A., Yang, H., Portela, C. M., Kochmann, D. M., Leo, C. V. D., & Greer, J. R. (2019) · Nature · doi:10.1038/s41586-019-1538-z · Cited by 250
Programmable gear-based mechanical metamaterials
Fang, X., Wen, J., Li, C., Yu, D., Zhang, H., & Gumbsch, P. (2022) · Nature Materials · doi:10.1038/s41563-022-01269-3 · Cited by 253
Assembly and applications of 3D conformal electronics on curvilinear surfaces
Huang, Y., Wu, H., Xiao, L., Duan, Y., Zhu, H. J., Bian, J., Ye, D., & Yin, Z. (2019) · Materials Horizons · doi:10.1039/c8mh01450g · Cited by 235
Self-citationExploiting Mechanical Instabilities in Soft Robotics: Control, Sensing, and Actuation
Pal, A., Restrepo, V., Goswami, D., & Martínez, R. V. (2021) · Advanced Materials · doi:10.1002/adma.202006939 · Cited by 234
Recent Progress in Active Mechanical Metamaterials and Construction Principles
Qi, J., Chen, Z., Jiang, P., Hu, W., Wang, Y., Zhao, Z., Cao, X., Zhang, S., Tao, R., Li, Y., et al. (2021) · Advanced Science · doi:10.1002/advs.202102662 · Cited by 233
Self-citationLaser reprogramming magnetic anisotropy in soft composites for reconfigurable 3D shaping
Deng, H., Sattari, K., Xie, Y., Liao, P., Yan, Z., & Lin, J. (2020) · Nature Communications · doi:10.1038/s41467-020-20229-6 · Cited by 224
Self-citationLeveraging of MEMS Technologies for Optical Metamaterials Applications
Ren, Z., Chang, Y., Ma, Y., Shih, K., Dong, B., & Lee, C. (2019) · Advanced Optical Materials · doi:10.1002/adom.201900653 · Cited by 208
Deployable mechanical metamaterials with multistep programmable transformation
Meng, Z., Liu, M., Yan, H., Genin, G. M., & Chen, C. (2022) · Science Advances · doi:10.1126/sciadv.abn5460 · Cited by 187
Ling, Y., Pang, W., Li, X., Goswami, S., Xu, Z., Stroman, D., Liu, Y., Fei, Q., Xu, Y., Zhao, G., et al. (2020) · Advanced Materials · doi:10.1002/adma.201908475 · Cited by 182
Self-citationActive Materials for Functional Origami
Leanza, S., Wu, S., Sun, X., Qi, H. J., & Zhao, R. R. (2023) · Advanced Materials · doi:10.1002/adma.202302066 · Cited by 171
Mechanically-Guided 3D Assembly for Architected Flexible Electronics
Bo, R., Xu, S., Yang, Y., & Zhang, Y. (2023) · Chemical Reviews · doi:10.1021/acs.chemrev.3c00335 · Cited by 180
Self-citationMulti-stable mechanical metamaterials by elastic buckling instability
Yang, H., & Ma, L. (2018) · Journal of Materials Science · doi:10.1007/s10853-018-3065-y · Cited by 172
Laser Transfer, Printing, and Assembly Techniques for Flexible Electronics
Bian, J., Zhou, L., Wan, X., Zhu, C., Yang, B., & Huang, Y. (2019) · Advanced Electronic Materials · doi:10.1002/aelm.201800900 · Cited by 167
Self-citationYang, B., Kong, J., & Fang, X. (2022) · Nature Communications · doi:10.1038/s41467-022-31740-3 · Cited by 163
Four-dimensional micro-building blocks
Huang, T., Huang, H., Jin, D., Chen, Q., Huang, J., Zhang, L., & Duan, H. (2020) · Science Advances · doi:10.1126/sciadv.aav8219 · Cited by 155
Flexible and Stretchable Electrochemical Sensors for Biological Monitoring
Zhao, Y., Jin, K., Li, J., Sheng, K., Huang, W., & Liu, Y. (2023) · Advanced Materials · doi:10.1002/adma.202305917 · Cited by 154
Self-citationTan, T., Yan, Z., Zou, H., Ma, K., Liu, F., Zhao, L., Peng, Z., & Zhang, W. (2019) · Applied Energy · doi:10.1016/j.apenergy.2019.113717 · Cited by 154
Self-citationLiquid-induced topological transformations of cellular microstructures
Li, S., Deng, B., Grinthal, A., Schneider‐Yamamura, A., Kang, J., Martens, R. S., Zhang, C., Li, J., Yu, S., Bertoldi, K., et al. (2021) · Nature · doi:10.1038/s41586-021-03404-7 · Cited by 150
Liu, H., Tian, H., Li, X., Chen, X., Zhang, K., Shi, H., Wang, C., & Shao, J. (2022) · Science Advances · doi:10.1126/sciadv.abn5722 · Cited by 152
Self-citationWang, X. S., Guo, X., Ye, J., Zheng, N., Kohli, P., Choi, D., Zhang, Y., Xie, Z., Zhang, Q., Luan, H., et al. (2018) · Advanced Materials · doi:10.1002/adma.201805615 · Cited by 148
Self-citationZhang, H., Wu, J. J., Fang, D., & Zhang, Y. (2021) · Science Advances · doi:10.1126/sciadv.abf1966 · Cited by 143
Self-citationLantean, S., Barrera, G., Pirri, C. F., Tiberto, P. M., Sangermano, M., Roppolo, I., & Rizza, G. (2019) · Advanced Materials Technologies · doi:10.1002/admt.201900505 · Cited by 143
Micro/Nanoscale 3D Assembly by Rolling, Folding, Curving, and Buckling Approaches
Cheng, X., & Zhang, Y. (2019) · Advanced Materials · doi:10.1002/adma.201901895 · Cited by 141
Self-citationSubmillimeter-scale multimaterial terrestrial robots
Han, M., Guo, X., Chen, X., Liang, C., Zhao, H., Zhang, Q., Bai, W., Zhang, F., Wei, H., Wu, C., et al. (2022) · Science Robotics · doi:10.1126/scirobotics.abn0602 · Cited by 140
Self-citationHarnessing plasticity in sequential metamaterials for ideal shock absorption
Liu, W., Janbaz, S., Dykstra, D., Ennis, B., & Coulais, C. (2024) · Nature · doi:10.1038/s41586-024-08037-0 · Cited by 139
Kirigami‐Design‐Enabled Hydrogel Multimorphs with Application as a Multistate Switch
Hao, X. P., Xu, Z., Li, C., Hong, W., Zheng, Q., & Wu, Z. L. (2020) · Advanced Materials · doi:10.1002/adma.202000781 · Cited by 138
ZADPOOR, A. A. (2019) · Biomaterials Science · doi:10.1039/c9bm01247h · Cited by 144
Programmable Hierarchical Kirigami
An, N., Domel, A. G., Zhou, J., Rafsanjani, A., & Bertoldi, K. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201906711 · Cited by 136
A Generic Soft Encapsulation Strategy for Stretchable Electronics
Li, K., Cheng, X., Zhu, F., Li, L., Xie, Z., Luan, H., Wang, Z., Ji, Z., Wang, H., Liu, F., et al. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201806630 · Cited by 135
Self-citationLuo, H., Wang, C., Linghu, C., Yu, K., Wang, C., & Song, J. (2019) · National Science Review · doi:10.1093/nsr/nwz109 · Cited by 133
Xu, R., Chen, C., Sun, J., He, Y., Li, X., Lu, M., & Chen, Y. (2023) · International Journal of Extreme Manufacturing · doi:10.1088/2631-7990/acf96a · Cited by 142
Self-citation3D Self‐Assembled Microelectronic Devices: Concepts, Materials, Applications
Karnaushenko, D., Kang, T. H., Bandari, V. K., Zhu, F., & Schmidt, O. G. (2019) · Advanced Materials · doi:10.1002/adma.201902994 · Cited by 127
Assembly of complex 3D structures and electronics on curved surfaces
Xue, Z., Jin, T., Xu, S., Bai, K., He, Q., Zhang, F., Cheng, X., Ji, Z., Pang, W., Shen, Z., et al. (2022) · Science Advances · doi:10.1126/sciadv.abm6922 · Cited by 126
Self-citationShape-morphing architected sheets with non-periodic cut patterns
Celli, P., McMahan, C., Ramirez, B., Bauhofer, A. A., Naify, C. J., Hofmann, D. C., Audoly, B., & Daraio, C. (2018) · Soft Matter · doi:10.1039/c8sm02082e · Cited by 117
Soft Materials and Devices Enabling Sensorimotor Functions in Soft Robots
Su, J., He, K., Li, Y., Tu, J., & Chen, X. (2025) · Chemical Reviews · doi:10.1021/acs.chemrev.4c00906 · Cited by 121
High-throughput fabrication of soft magneto-origami machines
Yi, S., Wang, L., Chen, Z., Wang, J., Song, X., Liu, P., Zhang, Y., Luo, Q., Peng, L., Wu, Z., et al. (2022) · Nature Communications · doi:10.1038/s41467-022-31900-5 · Cited by 119
Self-citationBuckling and twisting of advanced materials into morphable 3D mesostructures
Zhao, H., Li, K., Han, M., Zhu, F., Vázquez‐Guardado, A., Guo, P., Xie, Z., Park, Y., Chen, L., Wang, X. S., et al. (2019) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1901193116 · Cited by 112
Self-citationKirigami-inspired stents for sustained local delivery of therapeutics
Babaee, S., Shi, Y., Abbasalizadeh, S., Tamang, S. M., Hess, K., Collins, J. E., Ishida, K., Lopes, A., Williams, M., Albaghdadi, M. S., et al. (2021) · Nature Materials · doi:10.1038/s41563-021-01031-1 · Cited by 110
Soft shape-programmable surfaces by fast electromagnetic actuation of liquid metal networks
Ni, X., Luan, H., Kim, J.-T., Rogge, S. I., Bai, Y., Kwak, J. W., Liu, S., Yang, D. S., Li, S., Li, S., et al. (2022) · Nature Communications · doi:10.1038/s41467-022-31092-y · Cited by 110
Self-citationLiquid‐Crystal‐Elastomer‐Actuated Reconfigurable Microscale Kirigami Metastructures
Zhang, M., Shahsavan, H., Guo, Y., Pena‐Francesch, A., Zhang, Y., & Sitti, M. (2021) · Advanced Materials · doi:10.1002/adma.202008605 · Cited by 109
Self-citationDissecting Biological and Synthetic Soft–Hard Interfaces for Tissue-Like Systems
Fang, Y., Yang, X., Lin, Y., Shi, J., Promiński, A., Clayton, C., Ostroff, E., & Tian, B. (2021) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00365 · Cited by 109
Three-dimensional foldable quantum dot light-emitting diodes
Kim, D. C., Yun, H., Kim, J., Seung, H., Yu, W. S., Koo, J. H., Yang, J., Kim, J. H., Hyeon, T., & Kim, D. (2021) · Nature Electronics · doi:10.1038/s41928-021-00643-4 · Cited by 102
Huang, Y., Cui, Y., Deng, H., Wang, J., Hong, R., Hu, S., Hou, H., Dong, Y., Wang, H., Chen, J., et al. (2022) · Nature Biomedical Engineering · doi:10.1038/s41551-022-00931-0 · Cited by 105
Self-citationOrigami Biosystems: 3D Assembly Methods for Biomedical Applications
Quiñones, V. A. B., Zhu, H. Y., Solovev, A. A., Mei, Y., & Gracias, D. H. (2018) · Advanced Biosystems · doi:10.1002/adbi.201800230 · Cited by 98
Bioinspired elastomer composites with programmed mechanical and electrical anisotropies
Ling, Y., Pang, W., Liu, J., Page, M., Xu, Y., Zhao, G., Stalla, D., Xie, J., Zhang, Y., & Yan, Z. (2022) · Nature Communications · doi:10.1038/s41467-022-28185-z · Cited by 96
Self-citationKirigami-enabled self-folding origami
van Manen, T., Janbaz, S., Ganjian, M., & ZADPOOR, A. A. (2019) · Materials Today · doi:10.1016/j.mattod.2019.08.001 · Cited by 96
Pangolin‐Inspired Stretchable, Microwave‐Invisible Metascale
Wang, C., Lv, Z., Mohan, M. P., Cui, Z., Liu, Z., Jiang, Y., Li, J., Wang, C., Pan, S., Karim, M. F., et al. (2021) · Advanced Materials · doi:10.1002/adma.202102131 · Cited by 92
Recent Advances on Nanofiber Fabrications: Unconventional State-of-the-Art Spinning Techniques
Song, J., Kim, M., & Lee, H. (2020) · Polymers · doi:10.3390/polym12061386 · Cited by 91
Yi, Z., Birla, M., Oldham, K. R., & Filipov, E. T. (2020) · Advanced Functional Materials · doi:10.1002/adfm.202003741 · Cited by 91
High Performance, Tunable Electrically Small Antennas through Mechanically Guided 3D Assembly
Liu, F., Chen, Y., Song, H., Zhang, F., Fan, Z., Liu, Y., Feng, X., Rogers, J. A., Huang, Y. Y., & Zhang, Y. (2018) · Small · doi:10.1002/smll.201804055 · Cited by 87
Self-citationPang, W., Cheng, X., Zhao, H., Guo, X., Ji, Z., Li, G., Liang, Y., Xue, Z., Song, H., Zhang, F., et al. (2019) · National Science Review · doi:10.1093/nsr/nwz164 · Cited by 87
Self-citationChen, S., Wang, H., McCarthy, A. D., Yan, Z., Kim, H. J., Carlson, M. A., Younan Xia, A., & Xie, J. (2019) · Nano Letters · doi:10.1021/acs.nanolett.9b00217 · Cited by 85
Self-citationCation-induced shape programming and morphing in protein-based hydrogels
Khoury, L. R., Slawinski, M., Collison, D. R., & Popa, I. (2020) · Science Advances · doi:10.1126/sciadv.aba6112 · Cited by 84
Li, Y., Yu, H., Yu, K., Guo, X., & Wang, X. S. (2021) · Advanced Functional Materials · doi:10.1002/adfm.202100338 · Cited by 84
Complex 3D microfluidic architectures formed by mechanically guided compressive buckling
Luan, H., Zhang, Q., Liu, T., Wang, X. S., Zhao, S., Wang, H., Yao, S., Xue, Y., Kwak, J. W., Bai, W., et al. (2021) · Science Advances · doi:10.1126/sciadv.abj3686 · Cited by 79
Self-citationUnconstrained 3D Shape Programming with Light‐Induced Stress Gradient
Liu, C., Tan, Y., He, C., Ji, S., & Xu, H. (2021) · Advanced Materials · doi:10.1002/adma.202105194 · Cited by 79
Liu, Y., Wang, X. S., Xu, Y., Xue, Z., Zhang, Y., Ning, X., Cheng, X., Xue, Y., Lu, D., Zhang, Q., et al. (2019) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1907732116 · Cited by 78
Self-citationBioinspired Prosthetic Interfaces
Li, P., Ali, H. P. A., Cheng, W. M., Yang, J., & Tee, B. C. K. (2020) · Advanced Materials Technologies · doi:10.1002/admt.201900856 · Cited by 76
Inflight fiber printing toward array and 3D optoelectronic and sensing architectures
Wang, W., Ouaras, K., Rutz, A. L., Li, X., Gerigk, M., Naegele, T. E., Malliaras, G. G., & Huang, Y. Y. S. (2020) · Science Advances · doi:10.1126/sciadv.aba0931 · Cited by 73
Self-citationBioinspired Actuators Based on Stimuli‐Responsive Polymers
Cui, H., Zhao, Q., Wang, Y., & Du, X. (2019) · Chemistry - An Asian Journal · doi:10.1002/asia.201900292 · Cited by 73
Bai, K., Cheng, X., Xue, Z., Song, H., Sang, L., Zhang, F., Liu, F., Luo, X. D., Huang, W., Huang, Y. Y., et al. (2020) · Science Advances · doi:10.1126/sciadv.abb7417 · Cited by 73
Self-citationWu, Y., Han, Y., Wei, Z., Xie, Y., Yin, J., & Qian, J. W. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202306442 · Cited by 72
Inverse Design Strategies for 3D Surfaces Formed by Mechanically Guided Assembly
Fan, Z., Yang, Y., Zhang, F., Xu, Z., Zhao, H., Wang, T., Song, H., Huang, Y. Y., Rogers, J. A., & Zhang, Y. (2020) · Advanced Materials · doi:10.1002/adma.201908424 · Cited by 69
Self-citationDevelopable mechanisms on developable surfaces
Nelson, T. G., Zimmerman, T. K., Magleby, S. P., Lang, R. J., & Howell, L. L. (2019) · Science Robotics · doi:10.1126/scirobotics.aau5171 · Cited by 69
Remotely Triggered Assembly of 3D Mesostructures Through Shape‐Memory Effects
Park, J. K., Nan, K., Luan, H., Zheng, N., Zhao, S., Zhang, H., Cheng, X., Wang, H., Li, K., Xie, T., et al. (2019) · Advanced Materials · doi:10.1002/adma.201905715 · Cited by 68
Self-citationBiodegradable, three-dimensional colorimetric fliers for environmental monitoring
Yoon, H., Lee, G., Kim, J., Yoo, J., Luan, H., Cheng, S., Kang, S., Huynh, H. L. T., Kim, H.-S., Park, J., et al. (2022) · Science Advances · doi:10.1126/sciadv.ade3201 · Cited by 67
Self-citationEngineering Kirigami Frameworks Toward Real‐World Applications
Jin, L., & Yang, S. M. (2023) · Advanced Materials · doi:10.1002/adma.202308560 · Cited by 67
Li, J., Slesarenko, V., & Rudykh, S. (2018) · Soft Matter · doi:10.1039/c8sm00874d · Cited by 65
Reversible Surface Patterning by Dynamic Crosslink Gradients: Controlling Buckling in 2D
Hou, H., Hu, K., Lin, H., Forth, J., Zhang, W., Russell, T. P., Yin, J., & Jiang, X. (2018) · Advanced Materials · doi:10.1002/adma.201803463 · Cited by 65
Fang, J., Hsu, H.-H., Hsu, R., Peng, C., Lin, Y.-J., Chen, Y.-Y., Chen, S., & Hu, S. (2020) · NPG Asia Materials · doi:10.1038/s41427-020-00244-1 · Cited by 64
Materials and design strategies for stretchable electroluminescent devices
Yoo, J., Li, S., Kim, D., Yang, J., & Choi, M. K. (2022) · Nanoscale Horizons · doi:10.1039/d2nh00158f · Cited by 64
Morphable 3D structure for stretchable display
Lee, Y., Kim, B. J., Hu, L., Hong, J., & Ahn, J. (2022) · Materials Today · doi:10.1016/j.mattod.2022.01.017 · Cited by 60
Rolled‐up Nanotechnology: Materials Issue and Geometry Capability
Xu, C., Wu, X., Huang, G., & Mei, Y. (2018) · Advanced Materials Technologies · doi:10.1002/admt.201800486 · Cited by 61
Stretchable gas sensors for detecting biomarkers from humans and exposed environments
Yi, N., Shen, M., Erdely, D., & Cheng, H. (2020) · TrAC Trends in Analytical Chemistry · doi:10.1016/j.trac.2020.116085 · Cited by 59
Chen, Z., Lin, Y., Zheng, G., Yang, Y., Zhang, Y., Zheng, S., Li, J., Li, J., Ren, L., & Jiang, L. (2020) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.0c15406 · Cited by 60
Self-citationXia, N., Jin, D., Pan, C., Zhang, J., Yang, Z., Su, L., Zhao, J., Wang, L., & Zhang, L. (2022) · Nature Communications · doi:10.1038/s41467-022-35212-6 · Cited by 61
Self-citationDeep learning aided inverse design of the buckling-guided assembly for 3D frame structures
Jin, T., Cheng, X., Xu, S., Lai, Y., & Zhang, Y. (2023) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2023.105398 · Cited by 62
Self-citationMagneto-origami structures: engineering multi-stability and dynamics via magnetic-elastic coupling
Fang, H., Chang, T.-S., & Wang, K. (2019) · Smart Materials and Structures · doi:10.1088/1361-665x/ab524e · Cited by 59
Sensors in heart-on-a-chip: A review on recent progress
Cho, K. W., Lee, W. H., Kim, B., & Kim, D. (2020) · Talanta · doi:10.1016/j.talanta.2020.121269 · Cited by 58
Mechanically Guided Post‐Assembly of 3D Electronic Systems
Kim, B. H., Liu, F., Yu, Y., Jang, H., Xie, Z., Li, K., Lee, J., Jeong, J. Y., Ryu, A., Lee, Y., et al. (2018) · Advanced Functional Materials · doi:10.1002/adfm.201803149 · Cited by 58
Self-citationNanofabrication approaches for functional three-dimensional architectures
Zhao, H., Lee, Y., Han, M., Sharma, B. K., Chen, X., Ahn, J., & Rogers, J. A. (2019) · Nano Today · doi:10.1016/j.nantod.2019.100825 · Cited by 61
Self-citation
Metadata
- Authors
- Fu, H., Nan, K., Bai, W., Huang, W., Bai, K., Lu, L., Zhou, C., Liu, Y., Liu, F., Wang, J., Han, M., Yan, Z., Luan, H., Zhang, Y., Zhang, Y., Zhao, J., Cheng, X., Li, M., Lee, J. W., Liu, Y., Fang, D., Li, X., Huang, Y., Zhang, Y., & Rogers, J. A.
- Affiliations
- Tsinghua University (CN)
- University of Illinois Urbana-Champaign (US)
- Northwestern University (US)
- Peking University (CN)
- University of Missouri (US)
- Pusan National University (KR)
- Beijing Institute of Technology (CN)
- Corresponding author
- Zhang, Yijie
- Zhang, Yutong
- Huang, Yonggang
- Zhang, Yihui
- Rogers, John A.
- ORCID
- Venue
- Nature Materials
- Published
- 2018-01-29
- Volume
- 17
- Issue
- 3
- Pages
- 268-276
- ISSN
- 1476-1122 (ISSN-L)
- 1476-4660
- PMC
- PMC5877475
- OpenAlex
- W2791750990
- Cited by
- 393
- References
- 58
- Citations by year
- 2026: 20 · 2025: 37 · 2024: 44 · 2023: 41 · 2022: 50 · 2021: 52 · 2020: 54 · 2019: 58 · 2018: 37
- FWCI
- 32.07
- Type
- journal article
- Language
- en
- Open access
- green
- www.ncbi.nlm.nih.gov
- Locations
- Nature Materials (publishedVersion)
- PubMed (publishedVersion)
- Europe PMC (PubMed Central) (acceptedVersion)
- PubMed Central (acceptedVersion)
- eScholarship (California Digital Library) (submittedVersion)
- Funders
- U.S. Department of Energy (DEFG0207ER46471)
- National Institute of Biomedical Imaging and Bioengineering (R01EB019337)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Advanced Materials and Mechanics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced MEMS and NEMS Technologies
- Physical Sciences › Engineering › Mechanical Engineering › Modular Robots and Swarm Intelligence
- Keywords
- mesostructure, microelectronic devices, reconfigurable circuits, elastomer deformation
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
