The DOI matches its Crossref record; 54 of the 58 references it cites were found in a registry or an index.
Morphable 3D mesostructures and microelectronic devices by multistable buckling mechanics
Open accessAbstract
Three-dimensional (3D) structures capable of reversible transformations in their geometrical layouts have important applications across a broad range of areas. Most morphable 3D systems rely on concepts inspired by origami/kirigami or techniques of 3D printing with responsive materials. The development of schemes that can simultaneously apply across a wide range of size scales and with classes of advanced materials found in state-of-the-art microsystem technologies remains challenging. Here, we introduce a set of concepts for morphable 3D mesostructures in diverse materials and fully formed planar devices spanning length scales from micrometres to millimetres. The approaches rely on elastomer platforms deformed in different time sequences to elastically alter the 3D geometries of supported mesostructures via nonlinear mechanical buckling. Over 20 examples have been experimentally and theoretically investigated, including mesostructures that can be reshaped between different geometries as well as those that can morph into three or more distinct states. An adaptive radiofrequency circuit and a concealable electromagnetic device provide examples of functionally reconfigurable microelectronic devices.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Notably, 3D flexible electronics maintain conductivity while gaining an extra dimension and thus more sophisticated functions that 2D electronics do not offer (Figure 3E and 3F).[70–72]”
From Flexible Electronics and Devices as Human–Machine Interfaces for Medical Robotics (2022) · cites this paper as [70]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027
The development and application of optogenetics
Fenno, L., Yizhar, O., & Deisseroth, K. (2011) · Annual Review of Neuroscience · doi:10.1146/annurev-neuro-061010-113817 · Cited by 1,822
Transfer printing by kinetic control of adhesion to an elastomeric stamp
Meitl, M. A., Zhu, Z., Kumar, V., Lee, K. J., Feng, X., Huang, Y. Y., Adesida, I., Nuzzo, R. G., & Rogers, J. A. (2005) · Nature Materials · doi:10.1038/nmat1532 · Cited by 1,553
Self-citationInjectable, Cellular-Scale Optoelectronics with Applications for Wireless Optogenetics
Kim, T.-I., McCall, J. G., Jung, Y. H., Huang, X., Siuda, E. R., Li, Y., Song, J., Song, Y. M., Pao, H. A., Kim, R.-H., et al. (2013) · Science · doi:10.1126/science.1232437 · Cited by 1,174
Self-citationGeometry of Miura-folded metamaterials
Schenk, M., & Guest, S. D. (2013) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1217998110 · Cited by 1,032
Using origami design principles to fold reprogrammable mechanical metamaterials
Silverberg, J. L., Evans, A. A., McLeod, L., Hayward, R. C., Hull, T., Santangelo, C. D., & Cohen, I. (2014) · Science · doi:10.1126/science.1252876 · Cited by 1,011
Multistable Architected Materials for Trapping Elastic Strain Energy
Shan, S., Kang, S. H., Raney, J. R., Wang, P., Fang, L., Candido, F., Lewis, J. A., & Bertoldi, K. (2015) · Advanced Materials · doi:10.1002/adma.201501708 · Cited by 1,005
A method for building self-folding machines
Felton, S. M., Tolley, M. T., Demaine, E. D., Rus, D. L., & Wood, R. J. (2014) · Science · doi:10.1126/science.1252610 · Cited by 980
Xu, S. H., Yan, Z., Jang, K., Huang, W., Fu, H., Kim, J., Wei, Z., Flavin, M. T., McCracken, J. M., Wang, R., et al. (2015) · Science · doi:10.1126/science.1260960 · Cited by 934
Self-citationDesigning Responsive Buckled Surfaces by Halftone Gel Lithography
Kim, J., Hanna, J. A., Byun, M., Santangelo, C. D., & Hayward, R. C. (2012) · Science · doi:10.1126/science.1215309 · Cited by 873
Active materials by four-dimension printing
Ge, Q., Qi, H. J., & Dunn, M. L. (2013) · Applied Physics Letters · doi:10.1063/1.4819837 · Cited by 785
Ge, Q., Dunn, C. K., Qi, H. J., & Dunn, M. L. (2014) · Smart Materials and Structures · doi:10.1088/0964-1726/23/9/094007 · Cited by 729
Direct 4D Printing Via Active Composite Materials
Ding, Z., Yuan, C., Peng, X., Wang, T., Qi, H. J., & Dunn, M. L. (2017) · Science Advances · doi:10.1126/sciadv.1602890 · Cited by 692
Origami tubes assembled into stiff, yet reconfigurable structures and metamaterials
Filipov, E. T., Tachi, T., & Paulino, G. H. (2015) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1509465112 · Cited by 683
Printing, folding and assembly methods for forming 3D mesostructures in advanced materials
Zhang, Y., Zhang, F., Yan, Z., Ma, Q., Li, X., Huang, Y. Y., & Rogers, J. A. (2017) · Nature Reviews Materials · doi:10.1038/natrevmats.2017.19 · Cited by 619
Self-citationActive printed materials for complex self-evolving deformations
Raviv, D., Zhao, W., McKnelly, C., Papadopoulou, A., Kadambi, A., Shi, B., Hirsch, S., Dikovsky, D., Zyracki, M., Olguin, C., et al. (2014) · Scientific Reports · doi:10.1038/srep07422 · Cited by 568
A mechanically driven form of Kirigami as a route to 3D mesostructures in micro/nanomembranes
Zhang, Y., Yan, Z., Nan, K., Xiao, D., Liu, Y., Luan, H., Fu, H., Wang, X., Yang, Q., Wang, J., et al. (2015) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1515602112 · Cited by 536
Self-citationOrigami structures with a critical transition to bistability arising from hidden degrees of freedom
Silverberg, J. L., Na, J., Evans, A. A., Liu, B., Hull, T. C., Santangelo, C. D., Lang, R. J., Hayward, R. C., & Cohen, I. (2015) · Nature Materials · doi:10.1038/nmat4232 · Cited by 497
Overvelde, J. T. B., de Jong, T., Shevchenko, Y., Becerra, S. A., Whitesides, G. M., Weaver, J. C., Hoberman, C., & Bertoldi, K. (2016) · Nature Communications · doi:10.1038/ncomms10929 · Cited by 496
Programming curvature using origami tessellations
Dudte, L. H., Vouga, E., Tachi, T., & Mahadevan, L. (2016) · Nature Materials · doi:10.1038/nmat4540 · Cited by 486
Na, J., Evans, A. A., Bae, J., Chiappelli, M. C., Santangelo, C. D., Lang, R. J., Hull, T. C., & Hayward, R. C. (2014) · Advanced Materials · doi:10.1002/adma.201403510 · Cited by 453
Kim, S., Wu, J. C., Carlson, J. A., Jin, S. H., Kovalsky, A., Glass, P., Liu, Z., Ahmed, N., Elgan, S. L., Chen, W., et al. (2010) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1005828107 · Cited by 445
Self-citation3D Printed Quantum Dot Light-Emitting Diodes
Kong, Y. L., Tamargo, I. A., Kim, H., Johnson, B. N., Gupta, M. K., Koh, T., Chin, H.-A., Steingart, D. A., Rand, B. P., & McAlpine, M. C. (2014) · Nano Letters · doi:10.1021/nl5033292 · Cited by 442
Tetherless thermobiochemically actuated microgrippers
Leong, T. G., Randall, C. L., Benson, B. R., Bassik, N., Stern, G. M., & Gracias, D. H. (2009) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0807698106 · Cited by 432
Method of Packaging and Deployment of Large Membranes in Space
Miura, K. (1985) · JAXA Repository (JAXA) · Cited by 424
Geometric Mechanics of Periodic Pleated Origami
Wei, Z. Y., Guo, Z. V., Dudte, L. H., Liang, H., & Mahadevan, L. (2013) · Physical Review Letters · doi:10.1103/physrevlett.110.215501 · Cited by 415
Battery-free, stretchable optoelectronic systems for wireless optical characterization of the skin
Kim, J., Salvatore, G. A., Araki, H., Chiarelli, A. M., Xie, Z., Banks, A. R., Sheng, X., Liu, Y., Lee, J. W., Jang, K., et al. (2016) · Science Advances · doi:10.1126/sciadv.1600418 · Cited by 411
Self-citationOrigami based Mechanical Metamaterials
Lv, C. X., Krishnaraju, D., Konjevod, G., Yu, H., & Jiang, H. (2014) · Scientific Reports · doi:10.1038/srep05979 · Cited by 404
Rational design of reconfigurable prismatic architected materials
Overvelde, J. T. B., Weaver, J. C., Hoberman, C., & Bertoldi, K. (2017) · Nature · doi:10.1038/nature20824 · Cited by 373
Sequential self-folding of polymer sheets
Liu, Y., Shaw, B., Dickey, M. D., & Genzer, J. (2017) · Science Advances · doi:10.1126/sciadv.1602417 · Cited by 335
Self-citation“2D or not 2D”: Shape-programming polymer sheets
Liu, Y., Genzer, J., & Dickey, M. D. (2015) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2015.09.001 · Cited by 330
Self-citationOrigami Multistability: From Single Vertices to Metasheets
Waitukaitis, S., Menaut, R., Chen, B. G.-G., & van Hecke, M. (2015) · Physical Review Letters · doi:10.1103/physrevlett.114.055503 · Cited by 326
Rogers, J. A., Huang, Y. Y., Schmidt, O. G., & Gracias, D. H. (2016) · MRS Bulletin · doi:10.1557/mrs.2016.2 · Cited by 290
Self-citationYan, Z., Zhang, F., Wang, J., Liu, F., Guo, X., Nan, K., Lin, Q., Gao, M., Xiao, D., Shi, Y., et al. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201504901 · Cited by 282
Self-citationSelf-folding devices and materials for biomedical applications
Randall, C. L., Gultepe, E., & Gracias, D. H. (2011) · Trends in biotechnology · doi:10.1016/j.tibtech.2011.06.013 · Cited by 269
Kuribayashi‐Shigetomi, K., Onoe, H., & Takeuchi, S. (2012) · PLoS ONE · doi:10.1371/journal.pone.0051085 · Cited by 252
Mechanical assembly of complex, 3D mesostructures from releasable multilayers of advanced materials
Yan, Z., Zhang, F., Liu, F., Han, M., Ou, D., Liu, Y., Lin, Q., Guo, X., Fu, H., Xie, Z., et al. (2016) · Science Advances · doi:10.1126/sciadv.1601014 · Cited by 239
Self-citationReis, P. M. (2015) · Journal of Applied Mechanics · doi:10.1115/1.4031456 · Cited by 215
Smart Actuators and Adhesives for Reconfigurable Matter
Ko, H., & Javey, A. (2017) · Accounts of Chemical Research · doi:10.1021/acs.accounts.6b00612 · Cited by 185
Reconfigurable origami-inspired acoustic waveguides
Babaee, S., Overvelde, J. T. B., Chen, E. R., Tournat, V., & Bertoldi, K. (2016) · Science Advances · doi:10.1126/sciadv.1601019 · Cited by 180
Magnetic Assembly of Soft Robots with Hard Components
Kwok, S. W., Morin, S. A., Mosadegh, B., So, J., Shepherd, R. F., Martínez, R. V., Smith, B. S., Simeone, F. C., Stokes, A. A., & Whitesides, G. M. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201303047 · Cited by 166
Making the Cut: LatticeKirigamiRules
Castle, T., Cho, Y., Gong, X., Jung, E., Sussman, D. M., Yang, S. M., & Kamien, R. D. (2014) · Physical Review Letters · doi:10.1103/physrevlett.113.245502 · Cited by 161
Algorithmic lattice kirigami: A route to pluripotent materials
Sussman, D. M., Cho, Y., Castle, T., Gong, X., Jung, E., Yang, S. M., & Kamien, R. D. (2015) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1506048112 · Cited by 158
Li, X., & Gao, H. (2016) · Nature Materials · doi:10.1038/nmat4591 · Cited by 133
Self-citationOrigami interleaved tube cellular materials
Cheung, K., Tachi, T., Calisch, S., & Miura, K. (2014) · Smart Materials and Structures · doi:10.1088/0964-1726/23/9/094012 · Cited by 131
Self-folding thin-film materials: From nanopolyhedra to graphene origami
Shenoy, V. B., & Gracias, D. H. (2012) · MRS Bulletin · doi:10.1557/mrs.2012.184 · Cited by 122
Origami tubes with reconfigurable polygonal cross-sections
Filipov, E. T., Paulino, G. H., & Tachi, T. (2016) · Proceedings of the Royal Society A Mathematical Physical and Engineering Sciences · doi:10.1098/rspa.2015.0607 · Cited by 119
Transforming architectures inspired by origami
Reis, P. M., Jiménez, F. L., & Marthelot, J. (2015) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1516974112 · Cited by 105
Castle, T., Sussman, D. M., Tanis, M., & Kamien, R. D. (2016) · Science Advances · doi:10.1126/sciadv.1601258 · Cited by 71
Nan, K., Luan, H., Yan, Z., Ning, X., Wang, Y., Wang, A., Wang, J., Han, M., Chang, M., Li, K., et al. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201604281 · Cited by 62
Self-citationDecoupling local mechanics from large-scale structure in modular metamaterials
Yang, N., & Silverberg, J. L. (2017) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1620714114 · Cited by 54
The Institute of Space and Astronautical Science report
宇宙科学研究所 (1981) · Institute of Space and Astronautical Science eBooks · Cited by 44
Silicon Micro-Machines for Fun and Profit
Bishop, D. J., Pardo, F., Bolle, C., Giles, R. C., & Aksyuk, V. (2012) · Journal of Low Temperature Physics · doi:10.1007/s10909-012-0654-z · Cited by 35
Folding creases through bending
Al-Mulla, T., & Buehler, M. J. (2015) · Nature Materials · doi:10.1038/nmat4258 · Cited by 29
Cited by
Sorted by citations
Printing ferromagnetic domains for untethered fast-transforming soft materials
Kim, Y., Yuk, H., Zhao, R. R., Chester, S. A., & Zhao, X. (2018) · Nature · doi:10.1038/s41586-018-0185-0 · Cited by 2,231
Advances in 4D Printing: Materials and Applications
Kuang, X., Roach, D. J., Wu, J., Hamel, C. M., Ding, Z., Wang, T., Dunn, M. L., & Qi, H. J. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201805290 · Cited by 1,095
Magnetic Soft Materials and Robots
Kim, Y., & Zhao, X. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00481 · Cited by 920
Magnetic Shape Memory Polymers with Integrated Multifunctional Shape Manipulation
Ze, Q., Kuang, X., Wu, S., Wong, J., Montgomery, S. M., Zhang, R., Kovitz, J. M., Yang, F., Qi, H. J., & Zhao, R. R. (2019) · Advanced Materials · doi:10.1002/adma.201906657 · Cited by 743
Mechanical design and multifunctional applications of chiral mechanical metamaterials: A review
Wu, W., Hu, W., Qian, G., Liao, H., Xu, X., & Berto, F. (2019) · Materials & Design · doi:10.1016/j.matdes.2019.107950 · Cited by 746
Metadata
- Authors
- Fu, H., Nan, K., Bai, W., Huang, W., Bai, K., Lu, L., Zhou, C., Liu, Y., Liu, F., Wang, J., Han, M., Yan, Z., Luan, H., Zhang, Y., Zhang, Y., Zhao, J., Cheng, X., Li, M., Lee, J. W., Liu, Y., Fang, D., Li, X., Huang, Y., Zhang, Y., & Rogers, J. A.
- Affiliations
- Tsinghua University (CN)
- University of Illinois Urbana-Champaign (US)
- Northwestern University (US)
- Peking University (CN)
- University of Missouri (US)
- Pusan National University (KR)
- Beijing Institute of Technology (CN)
- Corresponding author
- Zhang, Yijie
- Zhang, Yutong
- Huang, Yonggang
- Zhang, Yihui
- Rogers, John A.
- ORCID
- Venue
- Nature Materials
- Published
- 2018-01-29
- Volume
- 17
- Issue
- 3
- Pages
- 268-276
- ISSN
- 1476-1122 (ISSN-L)
- 1476-4660
- PMC
- PMC5877475
- OpenAlex
- W2791750990
- Cited by
- 393
- References
- 58
- Citations by year
- 2026: 20 · 2025: 37 · 2024: 44 · 2023: 41 · 2022: 50 · 2021: 52 · 2020: 54 · 2019: 58 · 2018: 37
- FWCI
- 32.07
- Type
- journal article
- Language
- en
- Open access
- green
- www.ncbi.nlm.nih.gov
- Locations
- Nature Materials (publishedVersion)
- PubMed (publishedVersion)
- Europe PMC (PubMed Central) (acceptedVersion)
- PubMed Central (acceptedVersion)
- eScholarship (California Digital Library) (submittedVersion)
- Funders
- U.S. Department of Energy (DEFG0207ER46471)
- National Institute of Biomedical Imaging and Bioengineering (R01EB019337)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Advanced Materials and Mechanics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced MEMS and NEMS Technologies
- Physical Sciences › Engineering › Mechanical Engineering › Modular Robots and Swarm Intelligence
- Keywords
- mesostructure, microelectronic devices, reconfigurable circuits, elastomer deformation
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
