The DOI matches its Crossref record; 54 of the 58 references it cites were found in a registry or an index.
Morphable 3D mesostructures and microelectronic devices by multistable buckling mechanics
Open accessAbstract
Three-dimensional (3D) structures capable of reversible transformations in their geometrical layouts have important applications across a broad range of areas. Most morphable 3D systems rely on concepts inspired by origami/kirigami or techniques of 3D printing with responsive materials. The development of schemes that can simultaneously apply across a wide range of size scales and with classes of advanced materials found in state-of-the-art microsystem technologies remains challenging. Here, we introduce a set of concepts for morphable 3D mesostructures in diverse materials and fully formed planar devices spanning length scales from micrometres to millimetres. The approaches rely on elastomer platforms deformed in different time sequences to elastically alter the 3D geometries of supported mesostructures via nonlinear mechanical buckling. Over 20 examples have been experimentally and theoretically investigated, including mesostructures that can be reshaped between different geometries as well as those that can morph into three or more distinct states. An adaptive radiofrequency circuit and a concealable electromagnetic device provide examples of functionally reconfigurable microelectronic devices.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
The source backs part of the claim, not all of it — or backs it for a different population, condition or comparison.
In the citing paper
“Notably, 3D flexible electronics maintain conductivity while gaining an extra dimension and thus more sophisticated functions that 2D electronics do not offer (Figure 3E and 3F).[70–72]”
From Flexible Electronics and Devices as Human–Machine Interfaces for Medical Robotics (2022) · cites this paper as [70]
Experimental — accuracy not yet measured
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Sydney Gladman, A., Matsumoto, E. A., Nuzzo, R. G., Mahadevan, L., & Lewis, J. A. (2016) · Nature Materials · doi:10.1038/nmat4544 · Cited by 3,027
The development and application of optogenetics
Fenno, L., Yizhar, O., & Deisseroth, K. (2011) · Annual Review of Neuroscience · doi:10.1146/annurev-neuro-061010-113817 · Cited by 1,822
Transfer printing by kinetic control of adhesion to an elastomeric stamp
Meitl, M. A., Zhu, Z., Kumar, V., Lee, K. J., Feng, X., Huang, Y. Y., Adesida, I., Nuzzo, R. G., & Rogers, J. A. (2005) · Nature Materials · doi:10.1038/nmat1532 · Cited by 1,553
Self-citationInjectable, Cellular-Scale Optoelectronics with Applications for Wireless Optogenetics
Kim, T.-I., McCall, J. G., Jung, Y. H., Huang, X., Siuda, E. R., Li, Y., Song, J., Song, Y. M., Pao, H. A., Kim, R.-H., et al. (2013) · Science · doi:10.1126/science.1232437 · Cited by 1,174
Self-citationGeometry of Miura-folded metamaterials
Schenk, M., & Guest, S. D. (2013) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.1217998110 · Cited by 1,032
Using origami design principles to fold reprogrammable mechanical metamaterials
Silverberg, J. L., Evans, A. A., McLeod, L., Hayward, R. C., Hull, T., Santangelo, C. D., & Cohen, I. (2014) · Science · doi:10.1126/science.1252876 · Cited by 1,011
Multistable Architected Materials for Trapping Elastic Strain Energy
Shan, S., Kang, S. H., Raney, J. R., Wang, P., Fang, L., Candido, F., Lewis, J. A., & Bertoldi, K. (2015) · Advanced Materials · doi:10.1002/adma.201501708 · Cited by 1,005
A method for building self-folding machines
Felton, S. M., Tolley, M. T., Demaine, E. D., Rus, D. L., & Wood, R. J. (2014) · Science · doi:10.1126/science.1252610 · Cited by 980
Xu, S. H., Yan, Z., Jang, K., Huang, W., Fu, H., Kim, J., Wei, Z., Flavin, M. T., McCracken, J. M., Wang, R., et al. (2015) · Science · doi:10.1126/science.1260960 · Cited by 934
Self-citationDesigning Responsive Buckled Surfaces by Halftone Gel Lithography
Kim, J., Hanna, J. A., Byun, M., Santangelo, C. D., & Hayward, R. C. (2012) · Science · doi:10.1126/science.1215309 · Cited by 873
Cited by
Sorted by citations
Items 301–393 of 393
Minimally invasive bioelectronic implants
Li, P., Hibino, N., Shi, L. L., & Tian, B. (2026) · Nature Materials · doi:10.1038/s41563-026-02576-9 · Cited by 6
Zhang, L., Wu, T., Song, H., Tang, C., & Yu, Z. (2022) · The International Journal of Advanced Manufacturing Technology · doi:10.1007/s00170-022-10287-z · Cited by 6
Expansion mechanics of hydrogel-driven metamaterials with multiple deformation modes
Tao, R., Guo, Y., Li, J., Luo, J., Yang, Q., Chen, Y., & Wu, W. (2024) · Giant · doi:10.1016/j.giant.2024.100243 · Cited by 6
Hydrogel‐Reactive‐Microenvironment Powering Reconfiguration of Polymer Architectures
Liu, P., Mao, Z., Zhao, Y., Yin, J., Chu, C., Chen, X., & Lü, J. (2024) · Advanced Science · doi:10.1002/advs.202307830 · Cited by 6
Vasileiadis, T., Schöttle, M., Theis, M., Retsch, M., Fytas, G., & Graczykowski, B. (2024) · Small Methods · doi:10.1002/smtd.202400855 · Cited by 5
From in vitro to in vivo: Diverse applications of kirigami technology in medical devices
Li, F., Zhou, Y., Hu, Y. S., Feng, X., & Tian, G. (2025) · Materials Today Bio · doi:10.1016/j.mtbio.2025.101961 · Cited by 5
Three-dimensional flexible structures for miniature sensing and energy-harvesting devices
Dou, W., Wang, H., Liu, J., Han, M., Li, Q., & Yang, R. (2024) · Applied Energy · doi:10.1016/j.apenergy.2024.124455 · Cited by 6
Self-citationMorphable 3D architectures enabled by shear-guided approach
Li, K., Liu, Z., Hu, X., Xu, Z., Zhou, Y., Chen, L., Huang, Y. Y., Bo, R., & Zhang, Y. (2025) · Materials Today · doi:10.1016/j.mattod.2025.03.004 · Cited by 6
Self-citationCompressive Buckling Fabrication of 3D Cell‐Laden Microstructures
Chen, Z., Anandakrishnan, N., Xu, Y. D., & Zhao, R. (2021) · Advanced Science · doi:10.1002/advs.202101027 · Cited by 5
Theoretical Modeling of Vibrations of Mechanically Assembled 3D Serpentine Structures
Zhao, J. Z., Cao, H., & Shuai, Y. (2023) · Journal of Applied Mechanics · doi:10.1115/1.4056965 · Cited by 5
Self-citationLiu, Q., Shen, Z., Liu, Z. Y., Shuai, Y., Lv, Z., Jin, T., Cheng, X., & Zhang, Y. (2023) · Acta Mechanica Solida Sinica · doi:10.1007/s10338-023-00399-8 · Cited by 5
Self-citationMechanical modulation of multifunctional responses in three-dimensional terahertz metamaterials
Han, D., Zhang, L., & Chen, X. (2021) · Optics Express · doi:10.1364/oe.437459 · Cited by 5
Advancing Engineered Heart Muscle Tissue Complexity with Hydrogel Composites
Dickerson, D. A. (2022) · Advanced Biology · doi:10.1002/adbi.202200067 · Cited by 5
Chen, F., Liu, K., & Zhu, X. (2019) · IEEE/RSJ International Conference on Intelligent Robots and Systems (IROS) · doi:10.1109/iros40897.2019.8967566 · Cited by 5
Soft 3D electromagnetic structures with rapid, complex shape morphing
Park, J., Lu, Q., Jeffery, B., Wang, H., & Ni, X. (2025) · Science Advances · doi:10.1126/sciadv.aea5264 · Cited by 4
Advances, challenges and prospects of origami and kirigami optoelectronics
Lee, D., Kim, S.-B., Kim, J., & Yoo, S. (2026) · Nature Communications · doi:10.1038/s41467-025-68217-y · Cited by 6
Silicon nano-kirigami with controlled plastic, elastic and hysteretic deformations
Liang, Q., Liu, Z., Han, Y. D., Chen, S., Sun, H., Chen, Y., Zhang, Y., Niu, M., Li, C., Wang, Y., et al. (2025) · Nature Communications · doi:10.1038/s41467-025-61405-w · Cited by 4
Self-citationFolding angle and wing flexibility influence the flight performance of origami winged fruits
Cai, J.-F., Hsu, Y.-C., Yen, Y.-C., Lee, Y.-C., Peyton, B., Huang, M., Yu, H., & Juang, J. (2024) · Nonlinear Dynamics · doi:10.1007/s11071-024-09618-4 · Cited by 4
Design and Snap-Through Behaviors of Shape Memory Polymer Based Multistable Mesh Structure
Tao, Q., Xia, Z., Chen, X., & Li, X. (2024) · Lecture notes in mechanical engineering · doi:10.1007/978-981-99-8048-2_308 · Cited by 4
Self-citationDirectly Printed 3D Soft Microwave Plasmonic Enhanced‐Q Resonators by Decoupling from Lossy Media
Jeong, H. Y., Jeong, J., Choi, J., Kim, H., Han, J., & Chung, S. (2025) · Advanced Materials · doi:10.1002/adma.202418182 · Cited by 4
Understanding and Control of Compressively Buckled Semiconductor Thin Films
Lim, J., Fan, D., Lee, B., & Forrest, S. R. (2021) · Physical Review Applied · doi:10.1103/physrevapplied.16.064010 · Cited by 4
Electroadhesion-Mediated Interface Delamination for Assembly of Reconfigurable 3D Mesostructures
Pang, W., Liu, L., Xu, S., Shuai, Y., Zhao, J. Z., & Zhang, Y. (2023) · Journal of Applied Mechanics · doi:10.1115/1.4056861 · Cited by 4
Self-citationMa, C., Gu, D., Gao, J., Chen, W., Song, Y., & Setchi, R. (2020) · Smart innovation, systems and technologies · doi:10.1007/978-981-15-8131-1_21 · Cited by 4
Zhao, J. Z., Li, W., Guo, X., Wang, H., Rogers, J. A., & Huang, Y. Y. (2020) · MRS Bulletin · doi:10.1557/mrs.2020.253 · Cited by 13
Self-citationMicrofluidic switches driven by mechanically guided multistable buckling
Luo, G., Shi, L., Song, H., Li, M., Zhong, Y., He, X., & Fu, H. (2022) · Extreme Mechanics Letters · doi:10.1016/j.eml.2022.101763 · Cited by 4
Self-citationElectron Beam Maneuvering of a Single Polymer Layer for Reversible 3D Self-Assembly
Dai, C., & Cho, J. (2021) · Nano Letters · doi:10.1021/acs.nanolett.0c04723 · Cited by 4
Mechanical metamaterials: Advanced designs and manufacture
Fang, D., & Zhang, Y. (2021) · Current Opinion in Solid State and Materials Science · doi:10.1016/j.cossms.2021.100934 · Cited by 4
Self-citationReconfigurable modular origami for tunable 2D symmetry groups
Liu, W., Ren, Q., Wang, Y., Zhang, Z., Wang, X., Liang, Y., Huang, H., Ma, J., Jiang, H., & Chen, Y. (2025) · Science Advances · doi:10.1126/sciadv.ady3812 · Cited by 3
Fracture of films caused by uniaxial tensions: a numerical model
Jia, C., Wang, Z., Zhang, D., Zhang, T., & Meng, X. (2023) · Applied Mathematics and Mechanics · doi:10.1007/s10483-023-3061-7 · Cited by 3
Hilalpure, M. K., Jose, S., Rao, C. L., & Tangirala, A. K. (2020) · Mechanics of Advanced Materials and Structures · doi:10.1080/15376494.2020.1808264 · Cited by 3
A geometry-based framework for modeling the complexity of origami folding
Schulman, S. M., & Ning, X. (2021) · Theoretical and Applied Mechanics Letters · doi:10.1016/j.taml.2021.100241 · Cited by 3
Memory capacity of adaptive flow networks
Bhattacharyya, K., Zwicker, D., & Alim, K. (2023) · Physical review. E · doi:10.1103/physreve.107.034407 · Cited by 3
Patterning Techniques in Coplanar Micro/Nano Capacitive Sensors
Joo, S., Han, J. Y., Seo, S., & Kim, J. (2023) · Micromachines · doi:10.3390/mi14112034 · Cited by 3
Origami-Inspired Vibrotactile Actuator (OriVib): Design and Characterization
Κορρές, Γ., Iiyoshi, K., & Eid, M. A. (2023) · IEEE Transactions on Haptics · doi:10.1109/toh.2023.3348189 · Cited by 3
Folding and assembly methods for forming three-dimensional mesostructures
Fan, Z., Zhang, F., & Zhang, Y. (2018) · Chinese Science Bulletin (Chinese Version) · doi:10.1360/n972018-00396 · Cited by 2
Self-citationWei, L., Liu, L., Gao, C., Qian, C., Xi, K., Ruan, H., Yu, J., Luo, Z., & Cui, W. (2020) · Materials Science and Engineering C · doi:10.1016/j.msec.2020.111048 · Cited by 3
Fundamental study on laser interference induced polyimide film stripping process
Zhou, D., Li, Y., Yu, Z., & Xu, J. (2025) · Journal of Materials Research and Technology · doi:10.1016/j.jmrt.2025.04.070 · Cited by 2
Magnetic Kirigami Metasurfaces with Reprogrammed Multifunctionalities
Wang, J., Song, X., Jia, X., Peng, L., Zhou, Y., Zheng, B., Yang, Y., Zhang, F., Xie, X., Chen, W., et al. (2025) · ACS Nano · doi:10.1021/acsnano.5c09771 · Cited by 3
Self-citationStretch-induced instability of kirigami sheets with a periodic cut pattern
Karagiozova, D., & Zhang, X. (2025) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2025.110759 · Cited by 2
Magnetic coupling transforms random snapping into ordered sequences in soft metamaterials
Sun, H., Alkuino, G., Chi, Y., Zabila, Y., Qing, H., Makarov, D., Zhang, T., & Yin, J. (2026) · Science Advances · doi:10.1126/sciadv.aec3182 · Cited by 2
Wang, L.-Q., Tong, J.-Z., Evans, K. E., & Shen, J. (2026) · International Journal of Solids and Structures · doi:10.1016/j.ijsolstr.2026.113976 · Cited by 2
4D-printed composite actuators
Delbart, R., Roumy, L., Harcourt, M., Robert, C., Touchard, F., Truong-Hoang, T. Q., & Martínez-Hergueta, F. (2024) · Elsevier eBooks · doi:10.1016/b978-0-443-15917-6.00005-0 · Cited by 2
Shape Morphing Programmable Systems for Enhanced Control in Low‐Velocity Flow Applications
Kim, J., Kim, T., Jung, H., Huang, Y., Jeon, Y., Liu, F., Cheng, S., Park, J., Park, J., Jeffery, B., et al. (2025) · Advanced Intelligent Systems · doi:10.1002/aisy.202500457 · Cited by 3
Self-citationQuasi-static experimental path-following
Neville, R. M., Groh, R., Pirrera, A., & Schenk, M. (2019) · AIAA SciTech Forum · doi:10.2514/6.2019-0230 · Cited by 2
Fu, Y., Li, L., & Hu, Y. (2022) · Applied Sciences · doi:10.3390/app12188978 · Cited by 2
George, D., & Madou, M. J. (2020) · Springer eBooks · doi:10.1007/978-981-15-5712-5_9 · Cited by 2
Magnetic Shape Memory Polymers with Integrated Multifunctional Shape ManipulationsPreprint
Ze, Q., Kuang, X., Wu, S., Wong, J., Montgomery, S. M., Zhang, R., Kovitz, J. M., Yang, F., Qi, H. J., & Zhao, R. R. (2019) · arXiv (Cornell University) · doi:10.48550/arxiv.1909.13171 · Cited by 2
A brief overview of the School of Aerospace Engineering of Tsinghua University
Guan, N., Wang, B., & Li, L. (2018) · Chinese Journal of Aeronautics · doi:10.1016/j.cja.2018.07.005 · Cited by 1
Chirality manipulation of 3D printed gyroidal scaffolds towards mechanical properties enhancement
Zhang, Y., Zhang, J., Yang, W., Che, S., Cao, Y., & Han, L. (2024) · Additive manufacturing · doi:10.1016/j.addma.2024.104551 · Cited by 1
Self-citationYue, W., Chen, S., Yan, K., Wen, Y., Tang, R., Hu, G., & Ren, H. (2025) · Advanced Robotics Research · doi:10.1002/adrr.202400028 · Cited by 1
Firoozy, P., Haghighi, M. S., Kanygin, M. A., Ferguson, P. A., & Bahreyni, B. (2025) · Microsystems & Nanoengineering · doi:10.1038/s41378-025-01066-3 · Cited by 1
Reconfigurable Acoustic Printing for Conformal and Minimally Invasive Repair
Sun, C., Li, Z., Osman, A., Wang, Y., Yu, H., Wang, W., Yu, Z. T., He, Y., Chen, Y., Chen, X., et al. (2025) · Advanced Functional Materials · doi:10.1002/adfm.202525723 · Cited by 2
Self-citationFlexible and Stretchable Silicon Carbide Nanomembranes for Implantable Applications
Truong, T. A., Almasri, R. M., Huang, X., Zhao, S., Barton, M., Dang, T. B., Reshamwala, R., Ingles, J., Xu, M., Phan, P. T., et al. (2026) · ACS Applied Nano Materials · doi:10.1021/acsanm.5c04986 · Cited by 1
Jiang, J., Song, Y., Chen, S., Wang, Y., Li, Z., & Hu, Y. (2026) · Journal of Materials Processing Technology · doi:10.1016/j.jmatprotec.2026.119248 · Cited by 1
Programmable mechanical metasurfaces enabled by pre-compressed curved beam architectures
Liu, F., Jia, Z., Jiang, X., & Wang, L. (2026) · Journal of the Mechanics and Physics of Solids · doi:10.1016/j.jmps.2026.106566 · Cited by 1
Self-citationArmadillo-inspired active morphing skeletons for soft machines
Zhou, J., Zhou, W., Lee, S.-Y., Wu, S., Akbari, A., & Zhu, Y. (2026) · Science Advances · doi:10.1126/sciadv.aed2516 · Cited by 1
Auxiliary-ribbon-assisted buckling-guided 3D assembly strategy for programming curved surfaces
Wei, Z., Sun, J., Meng, X., & Xue, Z. (2026) · International Journal of Mechanical Sciences · doi:10.1016/j.ijmecsci.2026.111871 · Cited by 1
Mei, C., Tang, H., Li, S., Zhang, W., Hu, Y., & Li, L. (2026) · Mechanics of Materials · doi:10.1016/j.mechmat.2026.105783 · Cited by 1
Controlled Cooperative Wetting Enabled Heterogeneous Structured 3D Morphing Transducers
Sridhar, S., Wang, C., Terry, J. G., Chen, X., Sun, A., Li, Z., Lv, H., Xu, B. B., & Li, Y. (2020) · Advanced Materials Interfaces · doi:10.1002/admi.202001211 · Cited by 1
Optimal face-to-face coupling for fast self-folding kirigami
Bambic, M. P., Araújo, N. A. M., Walker, B. J., Hewitt, D. R., Pei, Q., Ni, R., & Volpe, G. (2024) · Soft Matter · doi:10.1039/d3sm01474f · Cited by 1
Dong, X. Y., Zhang, Z., Wu, B., Zheng, Z., Wang, Y., Huang, G., & Mei, Y. (2025) · Advanced Functional Materials · doi:10.1002/adfm.202517800 · Cited by 1
Magnetic Functional Materials for Haptic InterfacesPreprint
Ruan, L., Wang, Y., Zhao, X., Li, F., Liu, C., Tao, W., Liang, H., Zhang, X., & Yang, W. (2024) · doi:10.22541/au.172465854.41398182/v1 · Cited by 1
Structural Design of Flexible and Stretchable Electronics
Xie, Z., Zhao, Z., & Avila, R. O. (2024) · Wiley eBooks · doi:10.1002/9783527842308.ch6 · Cited by 1
Mechanics-guided Deterministic 3D Assembly
Huang, Y. (2020) · doi:10.26226/morressier.5f5f8e69aa777f8ba5bd6167
Self-citationAdvances in energy harvesting from heartbeat using flexible smart devices: state-of-the-art review
Zhang, Y., Lü, C., & Feng, X. (2018) · Scientia Sinica Informationis · doi:10.1360/n112018-00110
Self-citationAdaptive and Reconfigurable Architected Materials Driven by Electrochemistry
Xia, X. (2019) · CaltechTHESIS (California Institute of Technology) · doi:10.7907/q092-p711
Flexible and Stretchable Devices from Unconventional 3D Structural Design
Zhao, H., & Han, M. (2019) · Wiley eBooks · doi:10.1002/9783527820153.ch10
Self-citationOverview of Flexible and Stretchable Approaches
Han, M. (2019) · Wiley eBooks · doi:10.1002/9783527820153.ch6
Self-citationHuang, Y., Cui, Y., Deng, H., Wang, J., Hong, R., Hu, S., Hou, H., Dong, Y., Wang, H., Chen, J., et al. (2022) · bioRxiv (Cold Spring Harbor Laboratory) · doi:10.1101/2022.06.10.495723
Self-citationBuckling‐Induced Origami Assembly of 3D Micro/Nanostructures: Designs, Materials, and Applications
Cheng, X., & Zhang, Y. (2022) · Wiley eBooks · doi:10.1002/9783527813933.ch1
Self-citationStructural Engineering of Flexible Electronics
Huang, Y., Su, Y., & Jiang, S. (2022) · Springer eBooks · doi:10.1007/978-981-19-6623-1_1
Self-citationMemory capacity of flow network morphology
Bhattacharyya, K. (2023) · doi:10.53846/goediss-9722
Optimal face-to-face coupling for fast self-folding kirigamiPreprint
Bambic, M. P., Araújo, N. A. M., Walker, B. J., Hewitt, D. R., Pei, Q., Ni, R., & Volpe, G. (2023) · arXiv (Cornell University) · doi:10.48550/arxiv.2307.04145
Hou, X., Zhao, W., Zhang, K., & Deng, Z. (2023) · SSRN Electronic Journal · doi:10.2139/ssrn.4646606
Soft, wearable devices to monitor electrophysiological signals and gaseous biomarkers
Herbert, R., Popoola, M. O., Zhang, W., & Cheng, H. (2024) · Elsevier eBooks · doi:10.1016/b978-0-323-99147-6.00006-5 · Cited by 1
Flexible Electronics for Wearable Sensing Systems
Fu, Q. (2024) · Wiley eBooks · doi:10.1002/9783527841080.ch6 · Cited by 1
Stretch-Induced Buckling of Kirigami Sheets with a Periodic Cut PatternPreprint
Karagiozova, D., Lu, G., & Zhang, X. (2024) · SSRN Electronic Journal · doi:10.2139/ssrn.4903662
Mechanics‐Guided 3 D Assembly of Flexible Electronics
Luo, G., Zhao, J. Z., Cheng, X., & Zhang, Y. (2024) · doi:10.1002/9783527842308.ch9
Self-citationProgrammable Mechanical Metamaterials with Symmetrically Tunable Linear and Nonlinear PropertiesPreprint
Yu, M., Fang, X., & Yu, D. (2025) · SSRN Electronic Journal · doi:10.2139/ssrn.5131113
Tan, M., Gong, R., Chen, Y., Kim, M., Lu, X., Liu, H. X., Yang, R., Xu, Y., Zhong, H., Huang, Y., et al. (2025) · Small Methods · doi:10.1002/smtd.202500500 · Cited by 1
Self-citationCancelled: Highly Efficient Anisotropic Insulating Wooden Metamaterials
Zhang, K., Qiu, J., & Yang, Y. (2025) · IntechOpen eBooks · doi:10.5772/intechopen.1011775
Mechanics Design of Flexible Sensors
Li, Y., Zhao, Z., & Wu, W. (2025) · Wiley eBooks · doi:10.1002/9783527845507.ch1
Geometrically Programmable Multiresponsive 3-D Microsensors/Actuators
Hui, X., Luo, J., You, H., & Sun, H. (2025) · IEEE Sensors Journal · doi:10.1109/jsen.2025.3627944
Programmable Mechanical Metastructure with Symmetrically Tunable Linear and Nonlinear Properties
Yu, M., Fang, X., & Yu, D. (2025) · Acta Mechanica Solida Sinica · doi:10.1007/s10338-025-00674-w · Cited by 1
Wang, B., Zhang, B., Xu, J., Zou, H., Bi, H., Wu, Z., & Ouyang, H. (2026) · Mechanical Systems and Signal Processing · doi:10.1016/j.ymssp.2026.114461
Dynamic Behavior of Mass Sensor Based on Switchable Dual-Mode Composite Strips
Xu, Y., & Bi, H. (2026) · Sensors · doi:10.3390/s26113342
Crack propagation behavior and toughening mechanisms in heterogeneous truss lattice materials
Chen, T., Yang, F., Zhang, J., Zhang, W., Han, D., & Li, P. (2026) · Engineering Fracture Mechanics · doi:10.1016/j.engfracmech.2026.112350
Gutierrez-Prieto, E., Yakir, G., & Reis, P. M. (2026) · Mechanics of Materials · doi:10.1016/j.mechmat.2026.105771
Tang, H., He, S., Ye, M., & Wang, C. (2026) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6c03047
Liang, Z., Wang, Z., Zhao, X., Zhang, R., Cheng, J., Cheng, X., Zhao, Q., Wu, J., Chen, Y., Chen, Y., et al. (2026) · Advanced Sensor Research · doi:10.1002/adsr.202600003
Self-citationMicro/Nanomechanical devices for elastic strain engineering
Zhao, T., Zhou, J., Zhang, Y., Huo, W., Li, B., Wu, Y., Yip, P., Lu, A., & Lu, Y. (2026) · Chinese Science Bulletin (Chinese Version) · doi:10.1360/csb-2026-0688
Self-citationTong, D., Wang, J., Chen, Z., Borum, A. D., Huang, W., Huang, X., & Jawed, M. K. (2026) · Science Advances · doi:10.1126/sciadv.aeh2779
Self-citation
Metadata
- Authors
- Fu, H., Nan, K., Bai, W., Huang, W., Bai, K., Lu, L., Zhou, C., Liu, Y., Liu, F., Wang, J., Han, M., Yan, Z., Luan, H., Zhang, Y., Zhang, Y., Zhao, J., Cheng, X., Li, M., Lee, J. W., Liu, Y., Fang, D., Li, X., Huang, Y., Zhang, Y., & Rogers, J. A.
- Affiliations
- Tsinghua University (CN)
- University of Illinois Urbana-Champaign (US)
- Northwestern University (US)
- Peking University (CN)
- University of Missouri (US)
- Pusan National University (KR)
- Beijing Institute of Technology (CN)
- Corresponding author
- Zhang, Yijie
- Zhang, Yutong
- Huang, Yonggang
- Zhang, Yihui
- Rogers, John A.
- ORCID
- Venue
- Nature Materials
- Published
- 2018-01-29
- Volume
- 17
- Issue
- 3
- Pages
- 268-276
- ISSN
- 1476-1122 (ISSN-L)
- 1476-4660
- PMC
- PMC5877475
- OpenAlex
- W2791750990
- Cited by
- 393
- References
- 58
- Citations by year
- 2026: 20 · 2025: 37 · 2024: 44 · 2023: 41 · 2022: 50 · 2021: 52 · 2020: 54 · 2019: 58 · 2018: 37
- FWCI
- 32.07
- Type
- journal article
- Language
- en
- Open access
- green
- www.ncbi.nlm.nih.gov
- Locations
- Nature Materials (publishedVersion)
- PubMed (publishedVersion)
- Europe PMC (PubMed Central) (acceptedVersion)
- PubMed Central (acceptedVersion)
- eScholarship (California Digital Library) (submittedVersion)
- Funders
- U.S. Department of Energy (DEFG0207ER46471)
- National Institute of Biomedical Imaging and Bioengineering (R01EB019337)
- Topics
- Physical Sciences › Engineering › Mechanical Engineering › Advanced Materials and Mechanics
- Physical Sciences › Engineering › Electrical and Electronic Engineering › Advanced MEMS and NEMS Technologies
- Physical Sciences › Engineering › Mechanical Engineering › Modular Robots and Swarm Intelligence
- Keywords
- mesostructure, microelectronic devices, reconfigurable circuits, elastomer deformation
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
