CoChat
Sign Up
Cited by 132Supercapacitor Materials and FabricationAqueous and Flow BatteriesMXene and MAX Phase Materials

The DOI matches its Crossref record; 52 of the 52 references it cites were found in a registry or an index.

Flexible and Self-Healing Aqueous Supercapacitors for Low Temperature Applications: Polyampholyte Gel Electrolytes with Biochar Electrodes

Open access
Li, Xinda, Liu, Li, Wang, Xianzong, Ok, Yong Sik, Elliott, Janet A. W., Chang, Scott X., Chung, Hyun-Joong·2017·Scientific Reports
DOI 10.1038/s41598-017-01873-3PMC PMC5431763
Open this paper in CoChat — free accountOpen PDF

Abstract

A flexible and self-healing supercapacitor with high energy density in low temperature operation was fabricated using a combination of biochar-based composite electrodes and a polyampholyte hydrogel electrolyte. Polyampholytes, a novel class of tough hydrogel, provide self-healing ability and mechanical flexibility, as well as low temperature operation for the aqueous electrolyte. Biochar is a carbon material produced from the low-temperature pyrolysis of biological wastes; the incorporation of reduced graphene oxide conferred mechanical integrity and electrical conductivity and hence the electrodes are called biochar-reduced-graphene-oxide (BC-RGO) electrodes. The fabricated supercapacitor showed high energy density of 30 Wh/kg with ~90% capacitance retention after 5000 charge–discharge cycles at room temperature at a power density of 50 W/kg. At −30 °C, the supercapacitor exhibited an energy density of 10.5 Wh/kg at a power density of 500 W/kg. The mechanism of the low-temperature performance excellence is likely to be associated with the concept of non-freezable water near the hydrophilic polymer chains, which can motivate future researches on the phase behaviour of water near polyampholyte chains. We conclude that the combination of the BC-RGO electrode and the polyampholyte hydrogel electrolyte is promising for supercapacitors for flexible electronics and for low temperature environments.

Overview

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1038/s41598-017-01873-3

Cites

52 of 52 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 1 Schematic of supercapacitor (SC-PA) fabrication. (a) As-received biochar (BC-pristine) was oxidized (BC-treated) and dispersed in a graphene oxide solution. Subsequent solvent evaporation and graphene oxide reduction result in a consolidated electrode (BC-RGO) with high electrical conductivity. (b) The BC-RGO electrodes are supported on a Kapton substrate. (c) A polyampholyte hydrogel is synthesized on the BC-RGO electrodes by photo-initiated random copolymerization of NaSS and MPTC. (d) The electrolyte is dialyzed in 3 M KOH solution. (e) Compressing the dialyzed electrolyte/electrode pair with the top BC-RGO electrode will make a symmetric supercapacitor. (f) Three symmetric supercapacitors are encapsulated in silicone to light a green LED in (g).
Figure 1 Schematic of supercapacitor (SC-PA) fabrication. (a) As-received biochar (BC-pristine) was oxidized (BC-treated) and dispersed in a graphene oxide solution. Subsequent solvent evaporation and graphene oxide reduction result in a consolidated electrode (BC-RGO) with high electrical conductivity. (b) The BC-RGO electrodes are supported on a Kapton substrate. (c) A polyampholyte hydrogel is synthesized on the BC-RGO electrodes by photo-initiated random copolymerization of NaSS and MPTC. (d) The electrolyte is dialyzed in 3 M KOH solution. (e) Compressing the dialyzed electrolyte/electrode pair with the top BC-RGO electrode will make a symmetric supercapacitor. (f) Three symmetric supercapacitors are encapsulated in silicone to light a green LED in (g).CC BY · PubMed Central
Figure 2 (a) The SEM image of as-received biochar (BC-pristine) and (b) a magnified image of the small region identified by the white rectangular box in (a). (c) The SEM image of oxidized biochar (BC-treated) and (d) a magnified image of the small region identified in (c). (e) The SEM image of the top of a BC-RGO electrode and (f) a magnified image of the small region identified in (e). (g) The SEM image of the BC-RGO cross section and (h) a magnified image of the small region identified in (g).
Figure 2 (a) The SEM image of as-received biochar (BC-pristine) and (b) a magnified image of the small region identified by the white rectangular box in (a). (c) The SEM image of oxidized biochar (BC-treated) and (d) a magnified image of the small region identified in (c). (e) The SEM image of the top of a BC-RGO electrode and (f) a magnified image of the small region identified in (e). (g) The SEM image of the BC-RGO cross section and (h) a magnified image of the small region identified in (g).CC BY · PubMed Central
Figure 3 (a) Nitrogen adsorption isotherm according to the BET model and (b) Pore size distribution (represented as differential pore volume plotted against pore width) derived from (a), calculated with the NLDFT model.
Figure 3 (a) Nitrogen adsorption isotherm according to the BET model and (b) Pore size distribution (represented as differential pore volume plotted against pore width) derived from (a), calculated with the NLDFT model.CC BY · PubMed Central
Figure 4 (a) Cyclic voltammetry (CV) and (b) galvanostatic charging–discharging (GCD) profiles of symmetric SC-PA KOH (inset: specific capacitance verses current density). The arrow in (a) indicates the direction of increasing scanning rate. (c) Cycle test of the fabricated supercapacitor (SC-PA). The inset presents first and last three galvanostatic charging–discharging (GCD) profiles.
Figure 4 (a) Cyclic voltammetry (CV) and (b) galvanostatic charging–discharging (GCD) profiles of symmetric SC-PA KOH (inset: specific capacitance verses current density). The arrow in (a) indicates the direction of increasing scanning rate. (c) Cycle test of the fabricated supercapacitor (SC-PA). The inset presents first and last three galvanostatic charging–discharging (GCD) profiles.CC BY · PubMed Central
Figure 5 (a) Fabricated supercapacitor (SC-PA) temperature dependence of cyclic voltammetry (CV) profiles at a scan rate of 20 mV s−1. The arrow indicates the direction of increasing temperatures. (b) Galvanostatic charging–discharging (GCD) profiles at a current density of 1 A g−1. The inset indicates calculated specific capacitance with respect to temperature change. (c) A differential scanning calorimetry (DSC) result of 3 M KOH-containing polyampholyte hydrogel with increasing temperature compared with the change in conductivity as a function of temperature.
Figure 5 (a) Fabricated supercapacitor (SC-PA) temperature dependence of cyclic voltammetry (CV) profiles at a scan rate of 20 mV s−1. The arrow indicates the direction of increasing temperatures. (b) Galvanostatic charging–discharging (GCD) profiles at a current density of 1 A g−1. The inset indicates calculated specific capacitance with respect to temperature change. (c) A differential scanning calorimetry (DSC) result of 3 M KOH-containing polyampholyte hydrogel with increasing temperature compared with the change in conductivity as a function of temperature.CC BY · PubMed Central
Figure 6 Photographs of (a) pristine, (b) bent, (c) broken, and (d) self-healed supercapacitor (SC-PA). (c,d) show the procedure for the perpendicular cut. The procedure for the planar cut is described in supporting information. (e) Cyclic voltammetry (CV) profile of pristine, bent and self-healed (perpendicular and planar cuts) SC-PAs at a scan rate of 20 mV s−1. (f) Schematic illustration of polyampholyte hydrogel self-healing for the perpendicular cut.
Figure 6 Photographs of (a) pristine, (b) bent, (c) broken, and (d) self-healed supercapacitor (SC-PA). (c,d) show the procedure for the perpendicular cut. The procedure for the planar cut is described in supporting information. (e) Cyclic voltammetry (CV) profile of pristine, bent and self-healed (perpendicular and planar cuts) SC-PAs at a scan rate of 20 mV s−1. (f) Schematic illustration of polyampholyte hydrogel self-healing for the perpendicular cut.CC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Research works printed but not linked: 1

  1. Khodakovsky, I. L., Mironenko, M. V., Chernysheva, I. V. and Pokrovsky, O. S. Liquid radioactive waste solutions. In Contaminant hydrology: cold regions modelling (eds Grant, S. A. & Iskandar, I. K.) (CRC Press, 2000).

Cited by

Sorted by citations

See all 132

Related

See all

Metadata

Authors
Li, X., Liu, L., Wang, X., Ok, Y. S., Elliott, J. A. W., Chang, S. X., & Chung, H.-J.
Affiliations
  • University of Alberta (CA)
  • Kangwon National University (KR)
Corresponding author
Chung, Hyun-Joong
ORCID
Venue
Scientific Reports
Publisher
Springer Science and Business Media LLC
Published
2017-05-10
Volume
7
Issue
1
Pages
1685-1685
ISSN
2045-2322 (ISSN-L)
DOI
10.1038/s41598-017-01873-3
PMC
PMC5431763
OpenAlex
W2610557054
Cited by
132
References
52
Citations by year
2026: 7 · 2025: 8 · 2024: 3 · 2023: 18 · 2022: 17 · 2021: 15 · 2020: 27 · 2019: 18 · 2018: 15 · 2017: 4
FWCI
5.95
Type
journal article
Language
en
Open access
Licence
Locations
  • Scientific Reports (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
Funders
  • University of Alberta
  • Canada Research Chairs
  • Canadian Institutes of Health Research (140186_1)
  • Natural Sciences and Engineering Research Council of Canada (435914, CHRPJ 478519, RGPIN 435914)
Topics
  • Physical Sciences › Materials Science › Electronic, Optical and Magnetic Materials › Supercapacitor Materials and Fabrication
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Aqueous and Flow Batteries
  • Physical Sciences › Materials Science › Materials Chemistry › MXene and MAX Phase Materials
Keywords
aqueous supercapacitors, self-healing hydrogels, biochar electrodes, reduced graphene oxide, low-temperature performance, flexible energy storage, non-freezable water, energy density, cycling stability, flexible electronics

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review