CoChat

Analysis of Long Term Study Indicates Both Agronomic Optimal Plant Density and Increase Maize Yield per Plant Contributed to Yield Gain

Open access

The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.

Abstract

Concurrent to yield, maize ( Zea Mays L.) plant density has significantly increased over the years. Unlike yield, however, the rate of change in plant density and its contribution to maize yield gain are rarely reported. The main objectives of this study were to examine the trend in the agronomic optimum plant density (AOPD) and quantify the contribution of plant density to yield gain. Maize hybrid by seeding rate trials were conducted from 1987–2016 across North America (187,662 data points). Mixed model, response surface, and simple linear regression analyses were applied on the meta-data. New outcomes from this analysis are: (i) an increase in the AOPD at rate of 700 plant ha −1 yr −1 , (ii) increase in the AOPD of 1386, 580 and 404 plants ha −1 yr −1 for very high yielding (VHY, > 13 Mg ha −1 ), high yielding (HY, 10–13 Mg ha −1 ) and medium yielding (MY, 7–10 Mg ha −1 ), respectively, with a lack of change for the low yielding (LY, < 7 Mg ha −1 ) environment; (iii) plant density contribution to maize yield gain ranged from 8.5% to 17%, and (iv) yield improvement was partially explained by changes in the AOPD but we also identified positive impacts on yield components as other sources for yield gain.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1038/s41598-018-23362-x

Cites

36 of 36 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 1 Location average yield classified in five groups (a), over all data distribution and yield environments (b), and yield distribution by three major latitude groups (c) for the maize hybrid seeding trial 1987–2016. Not all counties, states, provinces, or hybrids were present every year. LY, low yielding environment constituted the lower 10% of the data; MY, medium yielding environment; HY, high yielding environment; and VHY, very high yielding environment, which constituted the top 10% of the data.
Figure 1 Location average yield classified in five groups (a), over all data distribution and yield environments (b), and yield distribution by three major latitude groups (c) for the maize hybrid seeding trial 1987–2016. Not all counties, states, provinces, or hybrids were present every year. LY, low yielding environment constituted the lower 10% of the data; MY, medium yielding environment; HY, high yielding environment; and VHY, very high yielding environment, which constituted the top 10% of the data.CC BY · PubMed Central
Figure 2 Changes in average agronomic optimum plant density (AOPD) over hybrid release year (panel a) for the entire North America, (panel b) by latitude group, and (c) by yield environment (LY, low-yielding; MY, medium-yielding; HY, high-yielding; VHY, very-high yielding environments). Red dot in panel a represent AOPD averaged for the hybrid release years 1972–87.
Figure 2 Changes in average agronomic optimum plant density (AOPD) over hybrid release year (panel a) for the entire North America, (panel b) by latitude group, and (c) by yield environment (LY, low-yielding; MY, medium-yielding; HY, high-yielding; VHY, very-high yielding environments). Red dot in panel a represent AOPD averaged for the hybrid release years 1972–87.CC BY · PubMed Central
Figure 3 Trend in maximum maize grain yield at the agronomic optimum plant density (AOPD) over hybrid release year in North America (panel a) and models for the relationship between plant density and yield from 1987 through 2016 averaged over five-year periods. Red dot in panel a represent yield at the AOPD (average predicted maximum yield) for the hybrid release years 1972–87. In Panel b, red triangle represents the change in planting density in horizontal side, change in yield in the vertical side of the triangle, and the slope (change in yield over change in planting density) by the hypotenuse of the triangle. Vertical dashed (dotted) lines in panel b indicate the positions of the AOPD at each lustrum. Equations for panels a and b are included in Tables 1 and 2, respectively.
Figure 3 Trend in maximum maize grain yield at the agronomic optimum plant density (AOPD) over hybrid release year in North America (panel a) and models for the relationship between plant density and yield from 1987 through 2016 averaged over five-year periods. Red dot in panel a represent yield at the AOPD (average predicted maximum yield) for the hybrid release years 1972–87. In Panel b, red triangle represents the change in planting density in horizontal side, change in yield in the vertical side of the triangle, and the slope (change in yield over change in planting density) by the hypotenuse of the triangle. Vertical dashed (dotted) lines in panel b indicate the positions of the AOPD at each lustrum. Equations for panels a and b are included in Tables 1 and 2, respectively.CC BY · PubMed Central
Figure 4 Maize maximum yield and AOPD averages for the 1987–1991 and 2012–2016 lustrums based on results in Fig. 3. The yield change without plant density change is the difference in yield of maize in 2012–2016 compared to 1987–1991 at the AOPD of 1987–1991. Yield change due to AOPD is the difference in yield gain at AOPD in 2012–2016 compared to yield for the same lustrum but at AOPD of 1987–1991. Additional yield gain from change in PD is the difference in yield of maize in 2012–2016 compared to 1987–1991 at the AOPD of 2012–2016.
Figure 4 Maize maximum yield and AOPD averages for the 1987–1991 and 2012–2016 lustrums based on results in Fig. 3. The yield change without plant density change is the difference in yield of maize in 2012–2016 compared to 1987–1991 at the AOPD of 1987–1991. Yield change due to AOPD is the difference in yield gain at AOPD in 2012–2016 compared to yield for the same lustrum but at AOPD of 1987–1991. Additional yield gain from change in PD is the difference in yield of maize in 2012–2016 compared to 1987–1991 at the AOPD of 2012–2016.CC BY · PubMed Central
Figure 5 Changes in maximum maize grain yield at the agronomic optimum plant density (AOPD) over hybrid release year in North America (panel a) and relationship between yield and plant density for the recent three decades (panel b) all relative to yield environment (LY, low-; MY, medium-; HY, high-; and VHY, very high-yielding environments).
Figure 5 Changes in maximum maize grain yield at the agronomic optimum plant density (AOPD) over hybrid release year in North America (panel a) and relationship between yield and plant density for the recent three decades (panel b) all relative to yield environment (LY, low-; MY, medium-; HY, high-; and VHY, very high-yielding environments).CC BY · PubMed Central
Figure 6 Changes in both optimal maize grain yield and AOPD over the last six lustrums (five-year periods) from 1987 through 2016 (panel a) and simulated relationship between plant density and yield at different seed weight (mg seed−1) to seed number (number of seed) combinations (panel b) in a high yielding environment with no resource limitation. A 400/1000 ratio indicates a hybrid that can produce 1000 seeds per plant with each seed weighing 400 mg. Also in the figure are example data points from the National Corn Growers Association Winner database (2011–2016) to demonstrate yields > 15 Mg ha−1 across different seeding rates and how our optimal planting density to yield data (red circles) fits into the simulation. Red two sided arrows in panel b indicate the change in yield gain at similar plant density between two hybrids differing only in seed weight and seed number. Error bars in (panel a) are standard errors.
Figure 6 Changes in both optimal maize grain yield and AOPD over the last six lustrums (five-year periods) from 1987 through 2016 (panel a) and simulated relationship between plant density and yield at different seed weight (mg seed−1) to seed number (number of seed) combinations (panel b) in a high yielding environment with no resource limitation. A 400/1000 ratio indicates a hybrid that can produce 1000 seeds per plant with each seed weighing 400 mg. Also in the figure are example data points from the National Corn Growers Association Winner database (2011–2016) to demonstrate yields > 15 Mg ha−1 across different seeding rates and how our optimal planting density to yield data (red circles) fits into the simulation. Red two sided arrows in panel b indicate the change in yield gain at similar plant density between two hybrids differing only in seed weight and seed number. Error bars in (panel a) are standard errors.CC BY · PubMed Central
Figure 7 Trends in USDA reported average plant density for the years from 1987 through 2016 across nine states, which have significant maize production.
Figure 7 Trends in USDA reported average plant density for the years from 1987 through 2016 across nine states, which have significant maize production.CC BY · PubMed Central
Figure 8 Theoretical framework on the effects of genotype (G) by environment (E) by management practices (M) effects on yield and its components, plant density, ear per plant, number of grains per ear, and grain weight. Plant density is a foundational intermediate factor that varies between- and is influenced by- G × E × M and thus affect yield (productivity). The G × E × M determines the yield environment.
Figure 8 Theoretical framework on the effects of genotype (G) by environment (E) by management practices (M) effects on yield and its components, plant density, ear per plant, number of grains per ear, and grain weight. Plant density is a foundational intermediate factor that varies between- and is influenced by- G × E × M and thus affect yield (productivity). The G × E × M determines the yield environment.CC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 36 references

Research works printed but not linked: 2

  1. Assefa, Y. et al. A New Insight into Corn Yield-Trend from 1987 through 2016. Crop Sci. 56, 2802–2817 (2017). · DOI · Paper page
  2. Russell, W. A. Agronomic performance of maize cultivars representing different eras of breeding. Maydica 29, 375–390 (1984).

Cited by

See all 223

Metadata

Authors
Assefa, Y., Carter, P., Hinds, M., Bhalla, G., Schon, R., Jeschke, M., Paszkiewicz, S., Smith, S., & Ciampitti, I. A.
Affiliations
  • Kansas State University (US)
  • Pioneer Hi-Bred (US)
  • Iowa State University (US)
Corresponding author
  • Assefa, Yared
  • Ciampitti, Ignacio A.
Venue
Scientific Reports
Published
2018-03-21
Volume
8
Issue
1
Pages
4937-4937
ISSN
2045-2322 (ISSN-L)
OpenAlex
W2806985348
Cited by
222
References
36
Citations by year
2026: 30 · 2025: 37 · 2024: 40 · 2023: 31 · 2022: 31 · 2021: 21 · 2020: 18 · 2019: 14
FWCI
22.39
Type
journal article
Language
en
Open access
Licence
Locations
  • Scientific Reports (publishedVersion, cc-by)
  • Europe PMC (PubMed Central) (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion)
Topics
  • Life Sciences › Agricultural and Biological Sciences › Agronomy and Crop Science › Crop Yield and Soil Fertility
  • Life Sciences › Agricultural and Biological Sciences › Plant Science › Soybean genetics and cultivation
  • Life Sciences › Agricultural and Biological Sciences › Agronomy and Crop Science › Agricultural Productivity and Crop Improvement
Keywords
maize, plant density, yield improvement, yield components, seeding rate, maize hybrids, long-term trends
MeSH terms
Crop Production, Zea mays, North America, Time Factors

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Analysis of Long Term Study Indicates Both Agronomic Optimal Plant Density and Increase Maize Yield per Plant Contributed to Yield Gain. https://app.cochat.ai/papers/10.1038/s41598-018-23362-x
The paper
Assefa, Y., Carter, P., Hinds, M., Bhalla, G., Schon, R., Jeschke, M., Paszkiewicz, S., Smith, S., & Ciampitti, I. A. (2018). Analysis of Long Term Study Indicates Both Agronomic Optimal Plant Density and Increase Maize Yield per Plant Contributed to Yield Gain. Scientific Reports. https://doi.org/10.1038/s41598-018-23362-x

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.