Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat

The DOI matches its Crossref record; 53 of the 53 references it cites were found in a registry or an index; 23 of the 68 sources its claims cite were checked for support.

Optimized removal of hexavalent chromium from water using spent tea leaves treated with ascorbic acid

Open access
Zaib, Qammer, Kyung, Daeseung · 2022 · Scientific Reports

Abstract

Abstract Spent tea leaves were functionalized with ascorbic acid to obtain treated tea waste (t-TW) to encourage the adsorption of hexavalent chromium from water. The adsorption removal of Cr(VI) was systematically investigated as a function of four experimental factors: pH (2–12), initial Cr(VI) concentration (1–100 mg L−1), t-TW dosage (0–4 g L−1), and temperature (10–50 °C) by following a statistical experimental design. A central composite rotatable experimental design based on a response surface methodology was used to establish an empirical model that assessed the individual and combined effects of factors on adsorptive removal of Cr(VI). The model was experimentally verified and statistically validated then used to predict optimal adsorption removal of Cr(VI) from water. At optimized conditions, ≥ 99% of 1 mg L−1 Cr(VI) can be removed by 4 g L−1 t-TW at a pH of 9. The adsorptive mechanism was assessed by conducting kinetics and equilibrium studies. The adsorption of Cr(VI) by t-TW followed a pseudo-second-order kinetics model (k2 = 0.001 g mg−1 h−1) and could be described by Langmuir and Temkin isotherms, indicating monolayer adsorption and predominantly adsorbate-adsorbent interactions. The t-TW exhibited a competitive Cr(VI) adsorption capacity of 232.2 mg g−1 compared with the other low-cost adsorbents. These results support the utilization of tea waste for the removal of hazardous metal contaminants from aqueous systems.

Overview

CoChat Summary

TL;DR

Spent black tea leaves functionalized with ascorbic acid (t-TW) were optimized via response surface methodology for Cr(VI) removal from water. At optimized conditions, ≥99% of 1 mg L−1 Cr(VI) was removed by 4 g L−1 t-TW at pH 9, with a competitive adsorption capacity of 232.2 mg g−1.

Key findings

  • The RSM model predicted and experiments verified ≥99% removal of 1 mg L−1 Cr(VI) at pH 9, 4 g L−1 t-TW, and 40 °C; residual Cr(VI) was below the method detection limit of 0.002 mg L−1 and below US EPA (0.1 mg L−1) and WHO (0.05 mg L−1) limits.
  • pH had the greatest effect on Cr(VI) removal, followed by initial Cr(VI) concentration, adsorbent dosage, and temperature; removal decreased as pH increased from 4.5 to 9.5 and as initial Cr(VI) concentration increased.
  • t-TW showed an experimental maximum adsorption capacity of 231.95 mg g−1 versus 193.45 mg g−1 for untreated tea waste, and a reported capacity of 232.2 mg g−1 in comparison with other adsorbents.
  • Equilibrium data were best described by Temkin (R² = 0.97) and Langmuir (R² = 0.95) isotherms; kinetics followed pseudo-second-order (R² = 0.98, k2 = 0.001 g mg−1 h−1, qe = 176.00 mg g−1) and intraparticle diffusion models.

Methods

  • Spent black tea waste was washed, dried, treated with 0.5 M ascorbic acid, washed again, and dried to produce t-TW; characterization used SEM, EDX, and FTIR.
  • A central composite rotatable design based on response surface methodology tested four factors: pH (2–12), initial Cr(VI) concentration (1–100 mg L−1), t-TW dosage (0–4 g L−1), and temperature (10–50 °C), with 30 experimental combinations (16 factorial, 8 axial, 6 center replicates).
  • Batch adsorption experiments used potassium dichromate solutions and the 1,5-diphenylcarbohydrazide method with UV–Vis detection; isotherm and kinetic parameters were fitted by nonlinear regression.

Limitations

  • The paper states that the difference between adjusted R² and predicted R² was 0.23, slightly above the desirable range of ≤0.2, possibly due to the complexity of the cubic model, and cautions that the model should be used with caution when predicting above or below experimentally validated ranges.
  • The paper states that the temperature term was significant only at an 85% confidence level but was retained to maintain model hierarchy due to interactions with significant terms.
  • Evident from the text: adsorption experiments used synthetic Cr(VI) solutions prepared from potassium dichromate rather than real wastewater, and the study reports batch equilibrium/kinetic tests without assessing adsorbent regeneration, column operation, or long-term stability.

Model-written summary. Check it against the paper before relying on it.

Integrity signals

Registry

Crossref · 10.1038/s41598-022-12787-0

Cites

53 of 53 references verified0 citation errors · 0 not checkable

Statistics

Nothing to recompute.

Figures

Figure 1 SEM of (a) tea waste (TW) and (b) treated tea waste (t-TW) modified with ascorbic acid. (c) FTIR spectra of the adsorbents.
Figure 1 SEM of (a) tea waste (TW) and (b) treated tea waste (t-TW) modified with ascorbic acid. (c) FTIR spectra of the adsorbents.CC BY · PubMed Central
Figure 2 Adsorption of Cr(VI) on tea waste (TW) and ascorbic acid treated tea waste (t-TW). (Contact time: 48 h, initial pH: 6.5, initial Cr(VI) concentration: 100 mg L−1; adsorbent dosage: 0.1–4 g L−1, and temperature: 25 °C).
Figure 2 Adsorption of Cr(VI) on tea waste (TW) and ascorbic acid treated tea waste (t-TW). (Contact time: 48 h, initial pH: 6.5, initial Cr(VI) concentration: 100 mg L−1; adsorbent dosage: 0.1–4 g L−1, and temperature: 25 °C).CC BY · PubMed Central
Figure 3 Predicted versus experimental plot for Cr(VI) removal by ascorbic acid treated tea waste (t-TW). Experimental conditions are provided in Table 2.
Figure 3 Predicted versus experimental plot for Cr(VI) removal by ascorbic acid treated tea waste (t-TW). Experimental conditions are provided in Table 2.CC BY · PubMed Central
Figure 4 One-factor effects plots of (a) pH, (b) initial Cr(VI) concentration, (c) t-TW dosage, and (d) temperature on Cr(VI) adsorption from water.
Figure 4 One-factor effects plots of (a) pH, (b) initial Cr(VI) concentration, (c) t-TW dosage, and (d) temperature on Cr(VI) adsorption from water.CC BY · PubMed Central
Figure 5 Combined effects of factors on Cr(VI) adsorption removal from water: (a) pH and initial Cr(VI) concentration at a t-TW dosage of 2 g L−1 and a temperature of 30 °C, (b) pH and t-TW dosage at an initial Cr(VI) concentration of 50.5 mg L−1 and a temperature of 30 °C, (c) pH and temperature at an initial Cr(VI) concentration of 50.5 mg L−1 and a t-TW dosage of 2 g L−1, and (d) initial Cr(VI) concentration and t-TW dosage at a pH 7 and a t-TW dosage 2 g L−1.
Figure 5 Combined effects of factors on Cr(VI) adsorption removal from water: (a) pH and initial Cr(VI) concentration at a t-TW dosage of 2 g L−1 and a temperature of 30 °C, (b) pH and t-TW dosage at an initial Cr(VI) concentration of 50.5 mg L−1 and a temperature of 30 °C, (c) pH and temperature at an initial Cr(VI) concentration of 50.5 mg L−1 and a t-TW dosage of 2 g L−1, and (d) initial Cr(VI) concentration and t-TW dosage at a pH 7 and a t-TW dosage 2 g L−1.CC BY · PubMed Central
Figure 6 (a) Ramp plots and (b) a contour plot representing optimized conditions for ≥ 99% removal of Cr(VI) from water. The flag indicates the location of parameters for optimized removal. (Contact time: 48 h; initial pH: 9.0; initial Cr(VI) concentration; 1.0 mg L−1; adsorbent dosage: 4.0 g L−1; and temperature: 40 °C).
Figure 6 (a) Ramp plots and (b) a contour plot representing optimized conditions for ≥ 99% removal of Cr(VI) from water. The flag indicates the location of parameters for optimized removal. (Contact time: 48 h; initial pH: 9.0; initial Cr(VI) concentration; 1.0 mg L−1; adsorbent dosage: 4.0 g L−1; and temperature: 40 °C).CC BY · PubMed Central
Figure 7 Comparison of equilibrium experimental data with the Langmuir, Freundlich, Temkin, and Dubinin–Radushkevich (D–R) models. (Contact time: 48 h; initial pH: 6.5; initial Cr(VI) concentration: 100 mg L−1; adsorbent dosage: 0.1–4 g L−1; and temperature: 25 °C).
Figure 7 Comparison of equilibrium experimental data with the Langmuir, Freundlich, Temkin, and Dubinin–Radushkevich (D–R) models. (Contact time: 48 h; initial pH: 6.5; initial Cr(VI) concentration: 100 mg L−1; adsorbent dosage: 0.1–4 g L−1; and temperature: 25 °C).CC BY · PubMed Central
Figure 8 Comparison of experimental kinetic data with (a) pseudo-first-order (PFO) and pseudo-second-order (PSO) kinetics models, and (b) an intraparticle diffusion model. (Contact time: 0.5–120 h, initial pH: 6.5; initial Cr(VI) concentration: 100 mg L−1; adsorbent dosage: 0.5 g L−1; and temperature: 25 °C).
Figure 8 Comparison of experimental kinetic data with (a) pseudo-first-order (PFO) and pseudo-second-order (PSO) kinetics models, and (b) an intraparticle diffusion model. (Contact time: 0.5–120 h, initial pH: 6.5; initial Cr(VI) concentration: 100 mg L−1; adsorbent dosage: 0.5 g L−1; and temperature: 25 °C).CC BY · PubMed Central

Verification

Claims the paper makes

16 Valid · 2 Not valid · 22 Not checked · 49 Own results and interpretations

45 more claims · 7 with their cited sources checked

Create a free account to see all 89 claims and to verify the 2 references still open.

See all claims — free account
  • Probably not a substantial claim. 14
  • It may state two separate claims as one. 31
  • The quote only partly states this claim. 1

Create a free account to see these claims.

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

Each contradiction between two passages listed here was confirmed by an independent check.

3 of 3

Citations

Cites

Show all 50 references

Research works printed but not linked: 2

  1. World Health Organization. Chromium in Drinking-Water Background Document for Development of WHO Guidelines for Drinking-Water Quality (WHO, 2020).
  2. Ebrahimian, A. & Saberikhah, E. Biosorption of methylene blue onto foumanat tea waste: Equilibrium and thermodynamic studies. Cell. Chem. Technol. 47, 657–666 (2013).

Cited by

See all 29

Metadata

Authors
Zaib, Q., & Kyung, D.
Affiliations
University of Ulsan (KR)
Corresponding author
Kyung, Daeseung
Venue
Scientific Reports
Published
2022-05-25
Volume
12
Issue
1
Pages
8845-8845
ISSN
2045-2322 (ISSN-L)
OpenAlex
W4281481515
Cited by
28
References
50
Citations by year
2026: 1 · 2025: 7 · 2024: 7 · 2023: 10 · 2022: 3
FWCI
1.97
Type
journal article
Language
en
Open access
Licence
Locations
  • Scientific Reports (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
Funders
University of Ulsan
Topics
  • Physical Sciences › Environmental Science › Water Science and Technology › Adsorption and biosorption for pollutant removal
  • Physical Sciences › Environmental Science › Health, Toxicology and Mutagenesis › Chromium effects and bioremediation
  • Physical Sciences › Environmental Science › Environmental Engineering › Environmental remediation with nanomaterials
Keywords
hexavalent chromium removal, spent tea leaves, ascorbic acid treatment, low-cost adsorbent, adsorption, heavy metal removal from water, adsorption kinetics, adsorption isotherms, pseudo-second-order kinetics, Langmuir isotherm, Temkin isotherm, response surface methodology, central composite rotatable design, adsorption optimization
MeSH terms
Adsorption, Ascorbic Acid, Chromium, Hydrogen-Ion Concentration, Kinetics, Tea, Water, Water Pollutants, Chemical, Water Purification, Plant Leaves

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

The claim verdicts this report counts are experimental: their accuracy is not yet measured.

A language model drew the claims from the paper on 2026-10-10, under version 3 of the claim definition (model deepseek-v4.1-flash, prompt extract-v3).

A second model labelled each claim on 2026-10-10 (model jev-1.13-20260917, definition revision gold-guideline-v0.2).

Cited sources are checked with a language model’s help (gpt-6-sol).

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Optimized removal of hexavalent chromium from water using spent tea leaves treated with ascorbic acid. https://app.cochat.ai/papers/10.1038/s41598-022-12787-0
The paper
Zaib, Q., & Kyung, D. (2022). Optimized removal of hexavalent chromium from water using spent tea leaves treated with ascorbic acid. Scientific Reports. https://doi.org/10.1038/s41598-022-12787-0

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.