The DOI matches its Crossref record; 13 of the 13 references it cites were found in a registry or an index.
Developing Gradient Metal Alloys through Radial Deposition Additive Manufacturing
Open accessAbstract
Interest in additive manufacturing (AM) has dramatically expanded in the last several years, owing to the paradigm shift that the process provides over conventional manufacturing. Although the vast majority of recent work in AM has focused on three-dimensional printing in polymers, AM techniques for fabricating metal alloys have been available for more than a decade. Here, laser deposition (LD) is used to fabricate multifunctional metal alloys that have a strategically graded composition to alter their mechanical and physical properties. Using the technique in combination with rotational deposition enables fabrication of compositional gradients radially from the center of a sample. A roadmap for developing gradient alloys is presented that uses multi-component phase diagrams as maps for composition selection so as to avoid unwanted phases. Practical applications for the new technology are demonstrated in low-coefficient of thermal expansion radially graded metal inserts for carbon-fiber spacecraft panels.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Thermo-Calc & DICTRA, computational tools for materials science
Andersson, J.-O., Helander, T., Höglund, L., Shi, P., & Sundman, B. (2002) · Calphad · doi:10.1016/s0364-5916(02)00037-8 · Cited by 4,322
Additive Manufacturing Technologies: Rapid Prototyping to Direct Digital Manufacturing
Gibson, I., Rosen, D. W., & Stucker, B. (2010) · National University of Singapore · doi:10.1007/978-1-4419-1120-9 · Cited by 2,969
Influence of processing on microstructure and mechanical properties of (α+β) titanium alloys
Lütjering, G. (1998) · Materials Science and Engineering: A · doi:10.1016/s0921-5093(97)00778-8 · Cited by 1,461
Murr, L. E., Quinones, S. A., Gaytan, S. M., Lopez, M. I., Rodela, A., Martinez, E. Y., Hernandez, D. H., Martinez, E., Medina, F., & Wicker, R. B. (2009) · Journal of the Mechanical Behavior of Biomedical Materials · doi:10.1016/j.jmbbm.2008.05.004 · Cited by 997
Rapid manufacturing of metal components by laser forming
Santos, E. C., Shiomi, M., Osakada, K., & Laoui, T. (2006) · International Journal of Machine Tools and Manufacture · doi:10.1016/j.ijmachtools.2005.09.005 · Cited by 740
Rapid Manufacturing: An Industrial Revolution for the Digital Age
(2005) · Wiley eBooks · doi:10.1002/0470033991 · Cited by 679
Kelly, S. M., & Kampe, S. L. (2004) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-004-0094-8 · Cited by 423
First-Principles Calculations and CALPHAD Modeling of Thermodynamics
Liu, Z.-K. (2009) · Journal of Phase Equilibria and Diffusion · doi:10.1007/s11669-009-9570-6 · Cited by 380
Self-citationImplications on design of rapid manufacturing
Hague, R., Campbell, I., & Dickens, P. (2003) · Proceedings of the Institution of Mechanical Engineers Part C Journal of Mechanical Engineering Science · doi:10.1243/095440603762554587 · Cited by 311
Griffith, M. L., Ensz, M. T., Puskar, J. D., Robino, C. V., Brooks, J. A., Philliber, J. A., Smugeresky, J. E., & Hofmeister, W. H. (2000) · MRS Proceedings · doi:10.1557/proc-625-9 · Cited by 225
Cited by
Additive manufacturing of metallic components – Process, structure and properties
DebRoy, T., Wei, H. L., Zuback, J. S., Mukherjee, T., Elmer, J. W., Milewski, J. O., Beese, A. M., Wilson-Heid, A., De, A., & Zhang, W. (2018) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.10.001 · Cited by 8,805
Additive manufacturing (3D printing): A review of materials, methods, applications and challenges
Ngo, T. D., Kashani, A., Imbalzano, G., Nguyen, K. T. Q., & Hui, D. (2018) · Composites Part B: Engineering · doi:10.1016/j.compositesb.2018.02.012 · Cited by 8,431
Metal Additive Manufacturing: A Review of Mechanical Properties
Lewandowski, J. J., & Seifi, M. (2016) · Annual Review of Materials Research · doi:10.1146/annurev-matsci-070115-032024 · Cited by 1,722
Additive manufacturing of multi-material structures
Bandyopadhyay, A., & Heer, B. (2018) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2018.04.001 · Cited by 1,029
Liu, Z., Meyers, M. A., Zhang, Z., & Ritchie, R. O. (2017) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.04.013 · Cited by 895
Self-citationMechanical properties and deformation mechanisms of gradient nanostructured metals and alloys
Li, X., Lu, L., Li, J., Zhang, X., & Gao, H. (2020) · Nature Reviews Materials · doi:10.1038/s41578-020-0212-2 · Cited by 846
Strategies for improving the sustainability of structural metals
Raabe, D., Tasan, C. C., & Olivetti, E. A. (2019) · Nature · doi:10.1038/s41586-019-1702-5 · Cited by 724
State of the Art in Directed Energy Deposition: From Additive Manufacturing to Materials Design
Dass, A., & Moridi, A. (2019) · Coatings · doi:10.3390/coatings9070418 · Cited by 667
Li, Y., Feng, Z., Hao, L., Huang, L., Xin, C., Wang, Y., Bilotti, E., Essa, K., Zhang, H., Li, Z., et al. (2020) · Advanced Materials Technologies · doi:10.1002/admt.201900981 · Cited by 614
Evolution of solidification texture during additive manufacturing
Wei, H. L., Mazumder, J., & DebRoy, T. (2015) · Scientific Reports · doi:10.1038/srep16446 · Cited by 557
Printability of alloys for additive manufacturing
Mukherjee, T., Zuback, J. S., De, A., & DebRoy, T. (2016) · Scientific Reports · doi:10.1038/srep19717 · Cited by 523
Metallurgy, mechanistic models and machine learning in metal printing
DebRoy, T., Mukherjee, T., Wei, H. L., Elmer, J. W., & Milewski, J. O. (2020) · Nature Reviews Materials · doi:10.1038/s41578-020-00236-1 · Cited by 497
Methods and materials for additive manufacturing: A critical review on advancements and challenges
Bhuvanesh Kumar, M., & Sathiya, P. (2021) · Thin-Walled Structures · doi:10.1016/j.tws.2020.107228 · Cited by 372
Additive manufacturing of functionally graded metallic materials using laser metal deposition
Yan, L., Chen, Y., & Liou, F. (2020) · Additive Manufacturing · doi:10.1016/j.addma.2019.100901 · Cited by 367
Non-beam-based metal additive manufacturing enabled by additive friction stir deposition
Yu, H. Z., Jones, M. E., Brady, G. W., Griffiths, R. J., Garcia, D., Rauch, H. A., Cox, C. D., & Hardwick, N. (2018) · Scripta Materialia · doi:10.1016/j.scriptamat.2018.03.025 · Cited by 361
Advances in additive manufacturing of metal-based functionally graded materials
Reichardt, A., Shapiro, A. A., Otis, R., Dillon, R. P., Borgonia, J. P., McEnerney, B. W., Hosemann, P., & Beese, A. M. (2021) · International Materials Reviews · doi:10.1080/09506608.2019.1709354 · Cited by 334
Self-citationLaser-based directed energy deposition (DED-LB) of advanced materials
Svetlizky, D., Zheng, B., Vyatskikh, A., Das, M., Bose, S., Bandyopadhyay, A., Schoenung, J. M., Lavernia, E. J., & Eliaz, N. (2022) · Materials Science and Engineering: A · doi:10.1016/j.msea.2022.142967 · Cited by 331
Sing, S. L., Huang, S., Goh, G. D., Goh, G. L., Tey, C. F., Tan, J. H. K., & Yeong, W. Y. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2021.100795 · Cited by 328
Borkar, T., Gwalani, B., Choudhuri, D., Mikler, C. V., Yannetta, C. J., Chen, X., Ramanujan, R. V., Styles, M. J., Gibson, M. A., & Banerjee, R. (2016) · Acta Materialia · doi:10.1016/j.actamat.2016.06.025 · Cited by 322
3D printed porous ceramic scaffolds for bone tissue engineering: a review
Wen, Y., Xun, S., Haoye, M., Baichuan, S., Peng, C., Xuejian, L., Kaihong, Z., Xuan, Y., Jiang, P., & Shibi, L. (2017) · Biomaterials Science · doi:10.1039/c7bm00315c · Cited by 302
Additive manufacturing of magnetic materials
Chaudhary, V., Mantri, S. A., Ramanujan, R. V., & Banerjee, R. (2020) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100688 · Cited by 275
Review on Additive Manufacturing of Multi-Material Parts: Progress and Challenges
Hasanov, S., Alkunte, S., Rajeshirke, M., Gupta, A., Huseynov, O., Fidan, I., Alifui-Segbaya, F., & Rennie, A. (2021) · Journal of Manufacturing and Materials Processing · doi:10.3390/jmmp6010004 · Cited by 258
Additive manufacturing for aerospace flight applications
Shapiro, A. A., Borgonia, J. P., Chen, Q. N., Dillon, R. P., McEnerney, B., Polit-Casillas, R., & Soloway, L. (2016) · Journal of Spacecraft and Rockets · doi:10.2514/1.a33544 · Cited by 178
Self-citation
Metadata
- Authors
- Hofmann, D. C., Roberts, S., Otis, R., Kolodziejska, J., Dillon, R. P., Suh, J.-O., Shapiro, A. A., Liu, Z.-K., & Borgonia, J.-P.
- Venue
- Scientific Reports
- Published
- 2014-06-19
- Volume
- 4
- Issue
- 1
- Pages
- 5357-5357
- ISSN
- 2045-2322 (ISSN-L)
- OpenAlex
- W2004715558
- Cited by
- 314
- References
- 13
- FWCI
- 24.15
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.