The DOI matches its Crossref record; 16 of the 16 references it cites were found in a registry or an index.
A Promising New Class of High-Temperature Alloys: Eutectic High-Entropy Alloys
Open accessAbstract
High-entropy alloys (HEAs) can have either high strength or high ductility, and a simultaneous achievement of both still constitutes a tough challenge. The inferior castability and compositional segregation of HEAs are also obstacles for their technological applications. To tackle these problems, here we proposed a novel strategy to design HEAs using the eutectic alloy concept, i.e. to achieve a microstructure composed of alternating soft fcc and hard bcc phases. As a manifestation of this concept, an AlCoCrFeNi2.1 (atomic portion) eutectic high-entropy alloy (EHEA) was designed. The as-cast EHEA possessed a fine lamellar fcc/B2 microstructure, and showed an unprecedented combination of high tensile ductility and high fracture strength at room temperature. The excellent mechanical properties could be kept up to 700°C. This new alloy design strategy can be readily adapted to large-scale industrial production of HEAs with simultaneous high fracture strength and high ductility.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Yeh, J. ‐., Chen, S. ‐., Lin, S. ‐., Gan, J. ‐., Chin, T. ‐., Shun, T. ‐., Tsau, C. ‐., & Chang, S. ‐. (2004) · Advanced Engineering Materials · doi:10.1002/adem.200300567 · Cited by 15,281
Microstructural development in equiatomic multicomponent alloys
Cantor, B., Chang, I. T. H., Knight, P., & Vincent, A. J. B. (2004) · Materials Science and Engineering: A · doi:10.1016/j.msea.2003.10.257 · Cited by 10,130
Microstructures and properties of high-entropy alloys
Zhang, Y., Zuo, T. T., Tang, Z., Gao, M. C., Dahmen, K. A., Liaw, P. K., & Lu, Z. P. (2014) · Progress in Materials Science · doi:10.1016/j.pmatsci.2013.10.001 · Cited by 7,128
Solid‐Solution Phase Formation Rules for Multi‐component Alloys
Zhang, Y., Zhou, Y. J., Lin, J. P., Chen, G. L., & Liaw, P. K. (2008) · Advanced Engineering Materials · doi:10.1002/adem.200700240 · Cited by 3,466
Otto, F., Dlouhý, A., Somsen, C., Bei, H., Eggeler, G., & George, E. P. (2013) · Acta Materialia · doi:10.1016/j.actamat.2013.06.018 · Cited by 3,352
Refractory high-entropy alloys
Senkov, O. N., Wilks, G. B., Miracle, D. B., Chuang, C. P., & Liaw, P. K. (2010) · Intermetallics · doi:10.1016/j.intermet.2010.05.014 · Cited by 2,950
Effect of valence electron concentration on stability of fcc or bcc phase in high entropy alloys
Guo, S., Ng, C., Lu, J., & Liu, C. T. (2011) · Journal of Applied Physics · doi:10.1063/1.3587228 · Cited by 2,911
Self-citationSluggish diffusion in Co–Cr–Fe–Mn–Ni high-entropy alloys
Tsai, K.-Y., Tsai, M.-H., & Yeh, J.-W. (2013) · Acta Materialia · doi:10.1016/j.actamat.2013.04.058 · Cited by 2,366
Tong, C.-J., Chen, Y.-L., Yeh, J.-W., Lin, S.-J., Chen, S.-K., Shun, T.-T., Tsau, C.-H., & Chang, S.-Y. (2005) · Metallurgical and Materials Transactions A · doi:10.1007/s11661-005-0283-0 · Cited by 1,239
Fatigue behavior of Al0.5CoCrCuFeNi high entropy alloys
Hemphill, M. A., Yuan, T., Wang, G. Y., Yeh, J. W., Tsai, C. W., Chuang, A., & Liaw, P. K. (2012) · Acta Materialia · doi:10.1016/j.actamat.2012.06.046 · Cited by 811
Cited by
A critical review of high entropy alloys and related concepts
Miracle, D. B., & Senkov, O. N. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.08.081 · Cited by 8,973
Mechanical properties of high-entropy alloys with emphasis on face-centered cubic alloys
Li, Z., Zhao, S., Ritchie, R. O., & Meyers, M. A. (2019) · Progress in Materials Science · doi:10.1016/j.pmatsci.2018.12.003 · Cited by 1,171
Science and technology in high-entropy alloys
Zhang, W., Liaw, P. K., & Zhang, Y. (2018) · Science China Materials · doi:10.1007/s40843-017-9195-8 · Cited by 1,131
Lu, Y., Gao, X., Jiang, L., Chen, Z., Wang, T., Jie, J., Kang, H., Zhang, Y., Guo, S., Ruan, H., et al. (2017) · Acta Materialia · doi:10.1016/j.actamat.2016.11.016 · Cited by 1,125
Self-citationHigh-entropy ceramics: Review of principles, production and applications
Akrami, S., Edalati, P., Fuji, M., & Edalati, K. (2021) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2021.100644 · Cited by 1,008
Shi, P., Ren, W., Zheng, T., Ren, Z., Hou, X., Peng, J., Hu, P., Gao, Y., Zhong, Y., & Liaw, P. K. (2019) · Nature Communications · doi:10.1038/s41467-019-08460-2 · Cited by 954
Gao, X., Lu, Y., Zhang, B., Liang, N., Wu, G., Sha, G., Liu, J., & Zhao, Y. (2017) · Acta Materialia · doi:10.1016/j.actamat.2017.07.041 · Cited by 887
Self-citationMulticomponent high-entropy Cantor alloys
Cantor, B. (2021) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100754 · Cited by 877
High-entropy alloys with heterogeneous microstructure: Processing and mechanical properties
Sathiyamoorthi, P., & Kim, H. S. (2022) · Progress in Materials Science · doi:10.1016/j.pmatsci.2020.100709 · Cited by 766
Strong yet ductile nanolamellar high-entropy alloys by additive manufacturing
Ren, J., Zhang, Y., Zhao, D., Chen, Y., Guan, S., Liu, Y., Liu, L., Peng, S., Kong, F., Poplawsky, J. D., et al. (2022) · Nature · doi:10.1038/s41586-022-04914-8 · Cited by 747
Colossal dielectric constant in high entropy oxides
Bérardan, D., Franger, S., Dragoe, D., Meena, A. K., & Dragoe, N. (2016) · physica status solidi (RRL) - Rapid Research Letters · doi:10.1002/pssr.201600043 · Cited by 693
Hierarchical crack buffering triples ductility in eutectic herringbone high-entropy alloys
Shi, P., Li, R., Li, Y., Wen, Y., Zhong, Y., Ren, W., Shen, Z., Zheng, T., Peng, J., Liang, X., et al. (2021) · Science · doi:10.1126/science.abf6986 · Cited by 678
Promising properties and future trend of eutectic high entropy alloys
Lu, Y., Dong, Y., Jiang, H., Wang, Z., Cao, Z., Guo, S., Wang, T., Li, T., & Liaw, P. K. (2020) · Scripta Materialia · doi:10.1016/j.scriptamat.2020.06.022 · Cited by 559
Self-citationHigh‐Entropy Alloys: Potential Candidates for High‐Temperature Applications – An Overview
Praveen, S., & Kim, H. S. (2018) · Advanced Engineering Materials · doi:10.1002/adem.201700645 · Cited by 526
Additive manufacturing of high entropy alloys: A practical review
Ostovari Moghaddam, A., Shaburova, N. A., Samodurova, M. N., Abdollahzadeh, A., & Trofimov, E. A. (2021) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2020.11.029 · Cited by 474
Chen, R., Qin, G., Zheng, H., Wang, L., Su, Y., Chiu, Y., Ding, H., Guo, J., & Fu, H. (2018) · Acta Materialia · doi:10.1016/j.actamat.2017.10.058 · Cited by 469
Phase Engineering of High‐Entropy Alloys
Chang, X., Zeng, M., Liu, K., & Fu, L. (2020) · Advanced Materials · doi:10.1002/adma.201907226 · Cited by 464
Shi, P., Zhong, Y., Li, Y., Ren, W., Zheng, T., Shen, Z., Yang, B., Peng, J., Hu, P., Zhang, Y., et al. (2020) · Materials Today · doi:10.1016/j.mattod.2020.09.029 · Cited by 464
Wani, I. S., Bhattacharjee, T., Sheikh, S., Bhattacharjee, P. P., Guo, S., & Tsuji, N. (2016) · Materials Science and Engineering: A · doi:10.1016/j.msea.2016.08.048 · Cited by 408
Self-citationPhase selection rules for cast high entropy alloys: An overview
Guo, S. (2015) · Materials Science and Technology · doi:10.1179/1743284715y.0000000018 · Cited by 375
Self-citationA new CrFeNi2Al eutectic high entropy alloy system with excellent mechanical properties
Jin, X., Bi, J., Zhang, L., Zhou, Y., Du, X., Liang, Y., & Li, B. (2019) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2018.08.176 · Cited by 337
A review on the dynamic-mechanical behaviors of high-entropy alloys
Tang, Y., Wang, R., Xiao, B., Zhang, Z., Li, S., Qiao, J., Bai, S., Zhang, Y., & Liaw, P. K. (2023) · Progress in Materials Science · doi:10.1016/j.pmatsci.2023.101090 · Cited by 314
Serration and noise behaviors in materials
Zhang, Y., Liu, J. P., Chen, S. Y., Xie, X., Liaw, P. K., Dahmen, K. A., Qiao, J. W., & Wang, Y. L. (2017) · Progress in Materials Science · doi:10.1016/j.pmatsci.2017.06.004 · Cited by 303
Bhattacharjee, T., Wani, I. S., Sheikh, S., Clark, I. T., Okawa, T., Guo, S., Bhattacharjee, P. P., & Tsuji, N. (2018) · Scientific Reports · doi:10.1038/s41598-018-21385-y · Cited by 303
Self-citationGwalani, B., Gorsse, S., Choudhuri, D., Styles, M., Zheng, Y., Mishra, R. S., & Banerjee, R. (2018) · Acta Materialia · doi:10.1016/j.actamat.2018.05.009 · Cited by 286
Microstructure and mechanical properties of CoCrFeNiZrx eutectic high-entropy alloys
Huo, W., Zhou, H., Fang, F., Xie, Z., & Jiang, J. (2017) · Materials & Design · doi:10.1016/j.matdes.2017.08.030 · Cited by 281
A ductile high entropy alloy with attractive magnetic properties
Li, P., Wang, A., & Liu, C. T. (2017) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2016.09.186 · Cited by 277
Effect of Niobium on Microstructure and Properties of the CoCrFeNb Ni High Entropy Alloys
Jiang, H., Jiang, L., Qiao, D., Lu, Y., Wang, T., Cao, Z., & Li, T. (2017) · Journal of Materials Science & Technology · doi:10.1016/j.jmst.2016.09.016 · Cited by 275
Self-citationUncovering the eutectics design by machine learning in the Al–Co–Cr–Fe–Ni high entropy system
Wu, Q., Wang, Z., Hu, X., Zheng, T., Yang, Z., He, F., Li, J., & Wang, J. (2020) · Acta Materialia · doi:10.1016/j.actamat.2019.10.043 · Cited by 275
Self-citationHigh-entropy alloys fabricated via powder metallurgy. A critical review
Torralba, J. M., Alvaredo, P., & García-Junceda, A. (2019) · Powder Metallurgy · doi:10.1080/00325899.2019.1584454 · Cited by 270
A novel Fe 20 Co 20 Ni 41 Al 19 eutectic high entropy alloy with excellent tensile properties
Jin, X., Zhou, Y., Zhang, L., Du, X., & Li, B. (2018) · Materials Letters · doi:10.1016/j.matlet.2018.01.017 · Cited by 262
Irradiation damage in (Zr0.25Ta0.25Nb0.25Ti0.25)C high-entropy carbide ceramics
Wang, F., Yan, X., Wang, T., Wu, Y., Shao, L., Nastasi, M., Lu, Y., & Cui, B. (2020) · Acta Materialia · doi:10.1016/j.actamat.2020.06.011 · Cited by 253
Self-citationSc–Zr–Nb–Rh–Pd and Sc–Zr–Nb–Ta–Rh–Pd High-Entropy Alloy Superconductors on a CsCl-Type Lattice
Stolze, K., Tao, J., von Rohr, F. O., Kong, T., & Cava, R. J. (2018) · Chemistry of Materials · doi:10.1021/acs.chemmater.7b04578 · Cited by 122
Cutting Edge of High-Entropy Alloy Superconductors from the Perspective of Materials Research
Kitagawa, J., Hamamoto, S., & Ishizu, N. (2020) · Metals · doi:10.3390/met10081078 · Cited by 109
High-entropy alloy superconductors on an α-Mn lattice
Stolze, K., Cevallos, F. A., Kong, T., & Cava, R. J. (2018) · Journal of Materials Chemistry C · doi:10.1039/c8tc03337d · Cited by 104
Superconductivity in equimolar Nb-Re-Hf-Zr-Ti high entropy alloy
Marik, S., Varghese, M., Sajilesh, K. P., Singh, D., & Singh, R. P. (2018) · Journal of Alloys and Compounds · doi:10.1016/j.jallcom.2018.08.039 · Cited by 83
Structural and Physical Properties of High-Entropy REBa2Cu3O7-δ Oxide Superconductors
Wang, K., Hou, Q., Pal, A., Wu, H., Si, J., Chen, J., Yu, S., Chen, Y., Lv, W., Ge, J.-Y., et al. (2021) · Journal of Superconductivity and Novel Magnetism · doi:10.1007/s10948-021-05855-5 · Cited by 26
Metadata
- Authors
- Lu, Y., Dong, Y., Guo, S., Jiang, L., Kang, H., Wang, T., Wen, B., Wang, Z., Jie, J., Cao, Z., Ruan, H., & Li, T.
- Venue
- Scientific Reports
- Published
- 2014-08-27
- Volume
- 4
- Issue
- 1
- Pages
- 6200-6200
- ISSN
- 2045-2322 (ISSN-L)
- OpenAlex
- W2103109670
- Cited by
- 1,737
- References
- 16
- FWCI
- 43.63
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.