The DOI matches its Crossref record; 16 of the 16 references it cites were found in a registry or an index.
On the Thermal and Thermodynamic (In)Stability of Methylammonium Lead Halide Perovskites
Open accessAbstract
The interest of the scientific community on methylammonium lead halide perovskites (MAPbX 3, X = Cl, Br, I) for hybrid organic-inorganic solar cells has grown exponentially since the first report in 2009. This fact is clearly justified by the very high efficiencies attainable (reaching 20% in lab scale devices) at a fraction of the cost of conventional photovoltaics. However, many problems must be solved before a market introduction of these devices can be envisaged. Perhaps the most important to be addressed is the lack of information regarding the thermal and thermodynamic stability of the materials towards decomposition, which are intrinsic properties of them and which can seriously limit or even exclude their use in real devices. In this work we present and discuss the results we obtained using non-ambient X-ray diffraction, Knudsen effusion-mass spectrometry (KEMS) and Knudsen effusion mass loss (KEML) techniques on MAPbCl 3, MAPbBr 3 and MAPbI 3. The measurements demonstrate that all the materials decompose to the corresponding solid lead (II) halide and gaseous methylamine and hydrogen halide and the decomposition is well detectable even at moderate temperatures (~60 °C). Our results suggest that these materials may be problematic for long term operation of solar devices.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Organometal Halide Perovskites as Visible-Light Sensitizers for Photovoltaic Cells
Kojima, A., Teshima, K., Shirai, Y., & Miyasaka, T. (2009) · Journal of the American Chemical Society · doi:10.1021/ja809598r · Cited by 23,090
Reaction Kinetics in Differential Thermal Analysis
Kissinger, H. E. (1957) · Analytical Chemistry · doi:10.1021/ac60131a045 · Cited by 13,196
Mathew, S., Yella, A., Gao, P., Humphry-Baker, R., Curchod, B. F. E., Ashari-Astani, N., Tavernelli, I., Rothlisberger, U., Nazeeruddin, M. K., & Grätzel, M. (2014) · Nature Chemistry · doi:10.1038/nchem.1861 · Cited by 4,473
Baikie, T., Fang, Y., Kadro, J. M., Schreyer, M., Wei, F., Mhaisalkar, S. G., Graetzel, M., & White, T. J. (2013) · Journal of Materials Chemistry A · doi:10.1039/c3ta10518k · Cited by 2,534
Solar cell efficiency tables (version 54)
Green, M. A., Dunlop, E. D., Levi, D. H., Hohl‐Ebinger, J., Yoshita, M., & Ho‐Baillie, A. W. Y. (2019) · Progress in Photovoltaics: Research and Applications · doi:10.1002/pip.3171 · Cited by 1,507
Han, Y., Meyer, S., Dkhissi, Y., Weber, K., Pringle, J. M., Bach, U., Spiccia, L., & Cheng, Y.-B. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta00358j · Cited by 1,002
Making and Breaking of Lead Halide Perovskites
Manser, J. S., Saidaminov, M. I., Christians, J. A., Bakr, O. M., & Kamat, P. V. (2016) · Accounts of Chemical Research · doi:10.1021/acs.accounts.5b00455 · Cited by 727
Solar cell efficiency tables (version 47)
Green, M. A., Emery, K., Hishikawa, Y., Warta, W., & Dunlop, E. D. (2016) · Progress in Photovoltaics: Research and Applications · doi:10.1002/pip.2728 · Cited by 650
Thermal Behavior of Methylammonium Lead-Trihalide Perovskite Photovoltaic Light Harvesters
Dualeh, A., Gao, P., Seok, S. I., Nazeeruddin, M. K., & Grätzel, M. (2014) · Chemistry of Materials · doi:10.1021/cm502468k · Cited by 574
Onoda-Yamamuro, N., Matsuo, T., & Suga, H. (1990) · Journal of Physics and Chemistry of Solids · doi:10.1016/0022-3697(90)90021-7 · Cited by 533
Structural Study on Cubic–Tetragonal Transition of CH3NH3PbI3
Kawamura, Y., Mashiyama, H., & Hasebe, K. (2002) · Journal of the Physical Society of Japan · doi:10.1143/jpsj.71.1694 · Cited by 510
Baikie, T., Barrow, N. S., Fang, Y., Keenan, P. J., Slater, P. R., Piltz, R. O., Gutmann, M., Mhaisalkar, S. G., & White, T. J. (2015) · Journal of Materials Chemistry A · doi:10.1039/c5ta01125f · Cited by 304
Tan, K. W., Moore, D. T., Saliba, M., Sai, H., Estroff, L. A., Hanrath, T., Snaith, H. J., & Wiesner, U. (2014) · ACS Nano · doi:10.1021/nn500526t · Cited by 293
Drowart, J., Chatillon, C. B., Hastie, J. W., & Bonnell, D. W. (2005) · Pure and Applied Chemistry · doi:10.1351/pac200577040683 · Cited by 267
Atomistic origins of CH3NH3PbI3 degradation to PbI2 in vacuum
Deretzis, I., Alberti, A., Pellegrino, G., Smecca, E., Giannazzo, F., Sakai, N., Miyasaka, T., & La Magna, A. (2015) · Applied Physics Letters · doi:10.1063/1.4916821 · Cited by 185
Properties of CH3NH3PbX3 (X = I, Br, Cl) Powders as Precursors for Organic/Inorganic Solar Cells
Dimesso, L., Dimamay, M., Hamburger, M., & Jaegermann, W. (2014) · Chemistry of Materials · doi:10.1021/cm503240k · Cited by 111
Cited by
Halide Perovskite Photovoltaics: Background, Status, and Future Prospects
Jena, A. K., Kulkarni, A., & Miyasaka, T. (2019) · Chemical Reviews · doi:10.1021/acs.chemrev.8b00539 · Cited by 3,087
A Review of Perovskites Solar Cell Stability
Wang, R., Mujahid, M., Duan, Y., Wang, Z., Xue, J., & Yang, Y. (2019) · Advanced Functional Materials · doi:10.1002/adfm.201808843 · Cited by 1,310
Long-term operating stability in perovskite photovoltaics
Zhu, H., Teale, S., Lintangpradipto, M. N., Mahesh, S., Chen, B., McGehee, M. D., Sargent, E. H., & Bakr, O. M. (2023) · Nature Reviews Materials · doi:10.1038/s41578-023-00582-w · Cited by 739
Cesium Titanium(IV) Bromide Thin Films Based Stable Lead-free Perovskite Solar Cells
Chen, M., Ju, M.-G., Carl, A. D., Zong, Y., Grimm, R. L., Gu, J., Zeng, X. C., Zhou, Y., & Padture, N. P. (2018) · Joule · doi:10.1016/j.joule.2018.01.009 · Cited by 607
Improving the Stability of Metal Halide Perovskite Materials and Light‐Emitting Diodes
Cho, H., Kim, Y., Wolf, C., Lee, H., & Lee, T. (2018) · Advanced Materials · doi:10.1002/adma.201704587 · Cited by 470
Metadata
- Authors
- Brunetti, B., Cavallo, C., Ciccioli, A., Gigli, G., & Latini, A.
- Venue
- Scientific Reports
- Published
- 2016-08-22
- Volume
- 6
- Issue
- 1
- Pages
- 31896-31896
- ISSN
- 2045-2322 (ISSN-L)
- OpenAlex
- W2516348107
- Cited by
- 268
- References
- 16
- FWCI
- 13.26
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.