The DOI matches its Crossref record; 38 of the 38 references it cites were found in a registry or an index.
Inkjet-Printed Graphene/PEDOT:PSS Temperature Sensors on a Skin-Conformable Polyurethane Substrate
Open accessAbstract
Epidermal electronic systems (EESs) are skin-like electronic systems, which can be used to measure several physiological parameters from the skin. This paper presents materials and a simple, straightforward fabrication process for skin-conformable inkjet-printed temperature sensors. Epidermal temperature sensors are already presented in some studies, but they are mainly fabricated using traditional photolithography processes. These traditional fabrication routes have several processing steps and they create a substantial amount of material waste. Hence utilizing printing processes, the EES may become attractive for disposable systems by decreasing the manufacturing costs and reducing the wasted materials. In this study, the sensors are fabricated with inkjet-printed graphene/PEDOT:PSS ink and the printing is done on top of a skin-conformable polyurethane plaster (adhesive bandage). Sensor characterization was conducted both in inert and ambient atmosphere and the graphene/PEDOT:PSS temperature sensors (thermistors) were able reach higher than 0.06% per degree Celsius sensitivity in an optimal environment exhibiting negative temperature dependence.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Multifunctional wearable devices for diagnosis and therapy of movement disorders
Son, D., Lee, J., Qiao, S., Ghaffari, R., Kim, J., Lee, J. E., Song, C., Kim, S. J., Lee, D. J., Jun, S. W., et al. (2014) · Nature Nanotechnology · doi:10.1038/nnano.2014.38 · Cited by 1,462
Ultrathin conformal devices for precise and continuous thermal characterization of human skin
Webb, R. C., Bonifas, A. P., Behnaz, A., Zhang, Y., Yu, K. J., Cheng, H., Shi, M., Bian, Z., Liu, Z., Kim, Y.-S., et al. (2013) · Nature Materials · doi:10.1038/nmat3755 · Cited by 1,229
Printable elastic conductors with a high conductivity for electronic textile applications
Matsuhisa, N., Kaltenbrunner, M., Yokota, T., Jinno, H., Kuribara, K., Sekitani, T., & Someya, T. (2015) · Nature Communications · doi:10.1038/ncomms8461 · Cited by 869
Highly conductive, printable and stretchable composite films of carbon nanotubes and silver
Chun, K.-Y., Oh, Y., Rho, J., Ahn, J.-H., Kim, Y.-J., Choi, H. R., & Baik, S. (2010) · Nature Nanotechnology · doi:10.1038/nnano.2010.232 · Cited by 859
Multifunctional Epidermal Electronics Printed Directly Onto the Skin
Yeo, W., Kim, Y., Lee, J., Ameen, A., Shi, L., Li, M., Wang, S., Ma, R., Jin, S. H., Kang, Z., et al. (2013) · Advanced Materials · doi:10.1002/adma.201204426 · Cited by 828
Transparent graphene/PEDOT–PSS composite films as counter electrodes of dye-sensitized solar cells
Hong, W., Xu, Y., Lu, G., Li, C., & Shi, G. (2008) · Electrochemistry Communications · doi:10.1016/j.elecom.2008.08.007 · Cited by 825
Nanomaterial‐Enabled Stretchable Conductors: Strategies, Materials and Devices
Yao, S., & Zhu, Y. (2015) · Advanced Materials · doi:10.1002/adma.201404446 · Cited by 695
Electronic Properties of Transparent Conductive Films of PEDOT:PSS on Stretchable Substrates
Lipomi, D. J., Lee, J. A., Vosgueritchian, M., Tee, B. C.-K., Bolander, J. A., & Bao, Z. (2012) · Chemistry of Materials · doi:10.1021/cm203216m · Cited by 580
Honda, W., Harada, S., Arie, T., Akita, S., & Takei, K. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201303874 · Cited by 456
Stretchable Active Matrix Temperature Sensor Array of Polyaniline Nanofibers for Electronic Skin
Hong, S. Y., Lee, Y. H., Park, H., Jin, S. W., Jeong, Y. R., Yun, J., You, I., Zi, G., & Ha, J. S. (2016) · Advanced Materials · doi:10.1002/adma.201504659 · Cited by 454
Highly stretchable and transparent nanomesh electrodes made by grain boundary lithography
Guo, C. F., Sun, T., Liu, Q., Suo, Z., & Ren, Z. (2014) · Nature Communications · doi:10.1038/ncomms4121 · Cited by 427
PEDOT Nanocrystal in Highly Conductive PEDOT:PSS Polymer Films
Takano, T., Masunaga, H., Fujiwara, A., Okuzaki, H., & Sasaki, T. (2012) · Macromolecules · doi:10.1021/ma300120g · Cited by 426
“Cut‐and‐Paste” Manufacture of Multiparametric Epidermal Sensor Systems
Yang, S., Chen, Y., Nicolini, L., Pasupathy, P., Sacks, J., Su, B., Yang, R., Sanchez, D., Chang, Y., Wang, P., et al. (2015) · Advanced Materials · doi:10.1002/adma.201502386 · Cited by 304
Breathable and Stretchable Temperature Sensors Inspired by Skin
Chen, Y., Lu, B., Chen, Y., & Feng, X. (2015) · Scientific Reports · doi:10.1038/srep11505 · Cited by 303
Epidermal Electronics with Advanced Capabilities in Near-Field Communication
Kim, J., Banks, A., Cheng, H., Xie, Z., Xu, S., Jang, K.-I., Lee, J. W., Liu, Z., Gutruf, P., Huang, X., et al. (2015) · Small · doi:10.1002/smll.201402495 · Cited by 274
Materials used to simulate physical properties of human skin
Dąbrowska, A. K., Rotaru, G. ‐., Derler, S., Spano, F., Camenzind, M., Annaheim, S., Stämpfli, R., Schmid, M., & Rossi, R. M. (2016) · Skin Research and Technology · doi:10.1111/srt.12235 · Cited by 259
Zhou, J., Anjum, D. H., Chen, L., Xu, X., Ventura, I. A., Jiang, L., & Lubineau, G. (2014) · J. Mater. Chem. C · doi:10.1039/c4tc01593b · Cited by 257
Temperature-Dependent Electrical Properties of Graphene Inkjet-Printed on Flexible Materials
Kong, D., Le, L. T., Li, Y., Zunino, J. L., & Lee, W. (2012) · Langmuir · doi:10.1021/la301775d · Cited by 233
Ionic Seebeck Effect in Conducting Polymers
Wang, H., Ail, U., Gabrielsson, R., Berggren, M., & Crispin, X. (2015) · Advanced Energy Materials · doi:10.1002/aenm.201500044 · Cited by 230
High skin temperature and hypohydration impair aerobic performance
Sawka, M. N., Cheuvront, S. N., & Kenefick, R. W. (2012) · Experimental Physiology · doi:10.1113/expphysiol.2011.061002 · Cited by 210
Webb, P. (1992) · European Journal of Applied Physiology and Occupational Physiology · doi:10.1007/bf00625070 · Cited by 203
Screen-Printing Fabrication and Characterization of Stretchable Electronics
Suikkola, J., Björninen, T., Mosallaei, M., Kankkunen, T., Iso-Ketola, P., Ukkonen, L., Vanhala, J., & Mäntysalo, M. (2016) · Scientific Reports · doi:10.1038/srep25784 · Cited by 201
Self-citationAll‐Printed Stretchable Electrochemical Devices
Bandodkar, A. J., Nuñez‐Flores, R., Jia, W., & Wang, J. (2015) · Advanced Materials · doi:10.1002/adma.201500768 · Cited by 199
Analysis of IR thermal imager for mass blind fever screening
Ng, E. Y. K., Kawb, G. J. L., & Chang, W. M. (2004) · Microvascular Research · doi:10.1016/j.mvr.2004.05.003 · Cited by 182
Relationship between skin temperature and muscle activation during incremental cycle exercise
Priego‐Quesada, J. I., Carpes, F. P., Bini, R. R., Palmer, R. S., Pérez‐Soriano, P., & de Anda, R. M. C. O. (2014) · Journal of Thermal Biology · doi:10.1016/j.jtherbio.2014.12.005 · Cited by 135
Thermoelectric Properties of Polymeric Mixed Conductors
Ail, U., Jafari, M. J., Wang, H., Ederth, T., Magnus Berggren, A., & Xavier Crispin, A. (2016) · Advanced Functional Materials · doi:10.1002/adfm.201601106 · Cited by 129
Houghton, V. J., Bower, V. M., & Chant, D. C. (2013) · Journal of Foot and Ankle Research · doi:10.1186/1757-1146-6-31 · Cited by 107
Benchirouf, A., Palaniyappan, S., Ramalingame, R., Raghunandan, P., Jagemann, T., Müller, C., Hietschold, M., & Kanoun, O. (2015) · Sensors and Actuators B Chemical · doi:10.1016/j.snb.2015.10.009 · Cited by 104
Fully Inkjet-Printed Flexible Temperature Sensors Based on Carbon and PEDOT:PSS1
Bali, C., Brandlmaier, A., Ganster, A., Raab, O., Zapf, J., & Hübler, A. C. (2016) · Materials Today Proceedings · doi:10.1016/j.matpr.2016.02.005 · Cited by 103
Webb, R. C., Pielak, R. M., Bastien, P., Ayers, J., Niittynen, J., Kurniawan, J., Manco, M., Lin, A., Cho, N. H., Malyrchuk, V., et al. (2015) · PLOS ONE · doi:10.1371/journal.pone.0118131 · Cited by 98
Self-citationXu, G., Li, Y., Ma, T., Ren, Y., Wang, H., Wang, L., Wen, J., Miller, D. J., Amine, K., & Chen, Z. (2015) · Nano Energy · doi:10.1016/j.nanoen.2015.10.020 · Cited by 96
Printable, Transparent, and Flexible Touch Panels Working in Sunlight and Moist Environments
Vuorinen, T., Zakrzewski, M., Rajala, S., Lupo, D. W., Vanhala, J. J., Palovuori, K. T., & Tuukkanen, S. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201401140 · Cited by 70
Self-citationPrinted wearable temperature sensor for health monitoring
Honda, W., Harada, S., Arie, T., Akita, S., & Takei, K. (2014) · Proceedings of IEEE Sensors/Proceedings of IEEE Sensors ... · doi:10.1109/icsens.2014.6985483 · Cited by 52
A stretchable humidity sensor based on a wrinkled polyaniline nanostructure
Ryu, H., Cho, S. J., Kim, B., & Lim, G. (2014) · RSC Advances · doi:10.1039/c4ra04938a · Cited by 40
Printed Flexible Gas Sensors based on Organic Materials
Kuberský, P., Syrový, T., Hamáček, A., Nešpůrek, S., & Stejskal, J. (2015) · Procedia Engineering · doi:10.1016/j.proeng.2015.08.746 · Cited by 37
A comparative study of reactive hyperemia in human forearm skin and muscle
Addor, G., Delachaux, A., Dischl, B., Hayoz, D., Liaudet, L., Waeber, B., & Feihl, F. (2008) · Physiological Research · doi:10.33549/physiolres.931225 · Cited by 35
Tuukkanen, S., Hoikkanen, M., Poikelispää, M., Honkanen, M., Vuorinen, T., Kakkonen, M., Vuorinen, J., & Lupo, D. W. (2014) · Synthetic Metals · doi:10.1016/j.synthmet.2014.02.014 · Cited by 32
Self-citationThermal sensor based on a polymer nanofilm
Culebras, M., López, A. M., Gómez, C. M., & Cantarero, A. (2016) · Sensors and Actuators A Physical · doi:10.1016/j.sna.2016.01.010 · Cited by 19
Cited by
Functional inks and printing of two-dimensional materials
Hu, G., Kang, J., Ng, L. W. T., Zhu, X., Howe, R. C. T., Jones, C. G., Hersam, M. C., & Hasan, T. (2018) · Chemical Society Reviews · doi:10.1039/c8cs00084k · Cited by 569
Sang, M., Shin, J., Kim, K., & Yu, K. J. (2019) · Nanomaterials · doi:10.3390/nano9030374 · Cited by 505
Flexible temperature sensors: A review
Arman Kuzubasoglu, B., & Kursun Bahadir, S. (2020) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2020.112282 · Cited by 369
3D-printed sensors: Current progress and future challenges
Khosravani, M. R., & Reinicke, T. (2020) · Sensors and Actuators A: Physical · doi:10.1016/j.sna.2020.111916 · Cited by 331
Wang, Y.-F., Sekine, T., Takeda, Y., Yokosawa, K., Matsui, H., Kumaki, D., Shiba, T., Nishikawa, T., & Tokito, S. (2020) · Scientific Reports · doi:10.1038/s41598-020-59432-2 · Cited by 316
Metadata
- Authors
- Vuorinen, T., Niittynen, J., Kankkunen, T., Kraft, T. M., & Mäntysalo, M.
- Venue
- Scientific Reports
- Published
- 2016-10-18
- Volume
- 6
- Issue
- 1
- Pages
- 35289-35289
- ISSN
- 2045-2322 (ISSN-L)
- OpenAlex
- W2533008382
- Cited by
- 335
- References
- 38
- FWCI
- 10.37
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.