Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat

The DOI matches its Crossref record; 23 of the 23 references it cites were found in a registry or an index.

Thermal Transport Characteristics of Human Skin Measured In Vivo Using Ultrathin Conformal Arrays of Thermal Sensors and Actuators

Open access

Abstract

Measurements of the thermal transport properties of the skin can reveal changes in physical and chemical states of relevance to dermatological health, skin structure and activity, thermoregulation and other aspects of human physiology. Existing methods for in vivo evaluations demand complex systems for laser heating and infrared thermography, or they require rigid, invasive probes; neither can apply to arbitrary regions of the body, offers modes for rapid spatial mapping, or enables continuous monitoring outside of laboratory settings. Here we describe human clinical studies using mechanically soft arrays of thermal actuators and sensors that laminate onto the skin to provide rapid, quantitative in vivo determination of both the thermal conductivity and thermal diffusivity, in a completely non-invasive manner. Comprehensive analysis of measurements on six different body locations of each of twenty-five human subjects reveal systematic variations and directional anisotropies in the characteristics, with correlations to the thicknesses of the epidermis (EP) and stratum corneum (SC) determined by optical coherence tomography, and to the water content assessed by electrical impedance based measurements. Multivariate statistical analysis establishes four distinct locations across the body that exhibit different physical properties: heel, cheek, palm, and wrist/volar forearm/dorsal forearm. The data also demonstrate that thermal transport correlates negatively with SC and EP thickness and positively with water content, with a strength of correlation that varies from region to region, e.g., stronger in the palmar than in the follicular regions.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1371/journal.pone.0118131

Cites

23 of 23 references verified0 citation errors · 0 not checkable

Statistics

Figures

Fig 1 Ultrathin, conformal device for evaluating thermal transport characteristics and validation on human skin. (a) Photograph of a device laminated onto a subject’s cheek. (b) Magnified view showing the location of the heater (red), a sensing element 3.5 mm away from the heater (blue), 4.7 mm away (black), and 5.8 mm away (green). (c) Magnified view during deformation. (d) Optical coherence tomography image of a region of a human palm before and (e) after mounting the array (blue).
Fig 1 Ultrathin, conformal device for evaluating thermal transport characteristics and validation on human skin. (a) Photograph of a device laminated onto a subject’s cheek. (b) Magnified view showing the location of the heater (red), a sensing element 3.5 mm away from the heater (blue), 4.7 mm away (black), and 5.8 mm away (green). (c) Magnified view during deformation. (d) Optical coherence tomography image of a region of a human palm before and (e) after mounting the array (blue).CC BY · PubMed Central
Fig 2 Thermal flow associated with low level transient heating on the surface of the skin. (a) Infrared image during heating at a single thermal actuator in an array device on the skin. (b) Finite element modelling results for the distribution of temperature during rapid, low level heating at an isolated actuator on the skin, after 1.2 s of heating at a power of 3.7 mW mm-2. (c) Spatial map of the rise in temperature due to transient heating sequentially in each element in the array. The solid black lines are experimental data; the red dashed lines are best fit calculations. The strong rise shown in upper leftmost element results from local delamination of the device from the skin. (d) Experimental data (solid lines) and best fit calculations (dashed lines) for the cheek (black) and heel (blue), along with extracted thermal transport properties.
Fig 2 Thermal flow associated with low level transient heating on the surface of the skin. (a) Infrared image during heating at a single thermal actuator in an array device on the skin. (b) Finite element modelling results for the distribution of temperature during rapid, low level heating at an isolated actuator on the skin, after 1.2 s of heating at a power of 3.7 mW mm-2. (c) Spatial map of the rise in temperature due to transient heating sequentially in each element in the array. The solid black lines are experimental data; the red dashed lines are best fit calculations. The strong rise shown in upper leftmost element results from local delamination of the device from the skin. (d) Experimental data (solid lines) and best fit calculations (dashed lines) for the cheek (black) and heel (blue), along with extracted thermal transport properties.CC BY · PubMed Central
Fig 3 Clinical data distributions. Boxplot representation of the data (open circles). The mean is represented by a black diamond shape. The top and the bottom line of the box are the first and third quartiles, and the middle line of the box is the second quartile—the median. The lower (upper) whisker represents the minimum (maximum) observation above (below) the 1.5 Inter Quartile Range (IQR) below (above) the lower (upper) quartile. Data distributions for the (a) stratum corneum thickness (SC-thick), (b) stratum corneum hydration (SC-h), (c) epidermis thickness (EP-thick), (d) thermal conductivity (k), (e) volumetric heat capacity (ρc p), and (f) thermal diffusivity (α).
Fig 3 Clinical data distributions. Boxplot representation of the data (open circles). The mean is represented by a black diamond shape. The top and the bottom line of the box are the first and third quartiles, and the middle line of the box is the second quartile—the median. The lower (upper) whisker represents the minimum (maximum) observation above (below) the 1.5 Inter Quartile Range (IQR) below (above) the lower (upper) quartile. Data distributions for the (a) stratum corneum thickness (SC-thick), (b) stratum corneum hydration (SC-h), (c) epidermis thickness (EP-thick), (d) thermal conductivity (k), (e) volumetric heat capacity (ρc p), and (f) thermal diffusivity (α).CC BY · PubMed Central
Fig 4 Clinical data correlation analysis. (a) Scatterplot matrix representation for the entire data set (all 6 body locations: cheek, volar and dorsal forearm, wrist, palm, and heel on 25 total subjects). Pairwise correlation analyses include the thermal characteristics (k, W m-1°C-1; ρc p, J cm-3°C-1; α, mm2 s-1) and stratum corneum thickness (SC-thick, μm), epidermal thickness (EP-thick, μm), and stratum corneum hydration (SC-h, arbitrary units). Data for different body areas are represented by different colors. The red line represents the pairwise linear regression slope. The pink shaded clouds represent the 95% bivariate normal density ellipse. Assuming the variables are bivariate normally distributed, this ellipse encloses approximately 95% of the points. (b) The bivariate correlations for the entire data set are represented using a color coding (HeatMap) scheme associated with a clustering of the descriptors. Dark red is associated with Pearson Correlation Coefficient, R, equal to 1 and dark blue is associated to R = -1. The Pearson correlation coefficients are given in S1 Table.
Fig 4 Clinical data correlation analysis. (a) Scatterplot matrix representation for the entire data set (all 6 body locations: cheek, volar and dorsal forearm, wrist, palm, and heel on 25 total subjects). Pairwise correlation analyses include the thermal characteristics (k, W m-1°C-1; ρc p, J cm-3°C-1; α, mm2 s-1) and stratum corneum thickness (SC-thick, μm), epidermal thickness (EP-thick, μm), and stratum corneum hydration (SC-h, arbitrary units). Data for different body areas are represented by different colors. The red line represents the pairwise linear regression slope. The pink shaded clouds represent the 95% bivariate normal density ellipse. Assuming the variables are bivariate normally distributed, this ellipse encloses approximately 95% of the points. (b) The bivariate correlations for the entire data set are represented using a color coding (HeatMap) scheme associated with a clustering of the descriptors. Dark red is associated with Pearson Correlation Coefficient, R, equal to 1 and dark blue is associated to R = -1. The Pearson correlation coefficients are given in S1 Table.CC BY · PubMed Central
Fig 5 Clinical data correlation analysis for regions without significant stratum corneum thickness. The same correlation analysis as in Fig. 6 for the (a) cheek, (b) dorsal forearm, (c) volar forearm and (d) wrist.
Fig 5 Clinical data correlation analysis for regions without significant stratum corneum thickness. The same correlation analysis as in Fig. 6 for the (a) cheek, (b) dorsal forearm, (c) volar forearm and (d) wrist.CC BY · PubMed Central
Fig 6 Clinical data correlation analysis for regions with significant stratum corneum thickness. The same correlation analysis as in Fig. 6 for the (a) palm and (b) heel.
Fig 6 Clinical data correlation analysis for regions with significant stratum corneum thickness. The same correlation analysis as in Fig. 6 for the (a) palm and (b) heel.CC BY · PubMed Central
Fig 7 Principal Component Analysis. Global, multivariate correlation analysis. On the Biplot each body location is represented by polygons and the descriptors by triangles.
Fig 7 Principal Component Analysis. Global, multivariate correlation analysis. On the Biplot each body location is represented by polygons and the descriptors by triangles.CC BY · PubMed Central
Fig 8 Spatial mapping of thermal transport associated with low level heating on the surface of the skin. (a) Spatial map of the changes in temperature at each sensor (i.e. element) in the array. The data processing uses an adjacent-average filter (window size = 8 s) and normalization to Element 16. The red highlight and colored boxes represent the elements boxed in the same colors in Fig. 1b. (b) Change in temperature at elements 3.5 mm away (blue), 4.7 mm away (black) and 5.8 mm away (red) from element responsible for thermal actuation. The solid and dashed lines represent experimental data and best fit calculations, with k ~ 0.35–0.43 W m-1 K-1 and α ~ 0.12–0.15 mm2 s-1. (c) Results of finite element modelling of an array on a cheek, in the same arrangement as b.
Fig 8 Spatial mapping of thermal transport associated with low level heating on the surface of the skin. (a) Spatial map of the changes in temperature at each sensor (i.e. element) in the array. The data processing uses an adjacent-average filter (window size = 8 s) and normalization to Element 16. The red highlight and colored boxes represent the elements boxed in the same colors in Fig. 1b. (b) Change in temperature at elements 3.5 mm away (blue), 4.7 mm away (black) and 5.8 mm away (red) from element responsible for thermal actuation. The solid and dashed lines represent experimental data and best fit calculations, with k ~ 0.35–0.43 W m-1 K-1 and α ~ 0.12–0.15 mm2 s-1. (c) Results of finite element modelling of an array on a cheek, in the same arrangement as b.CC BY · PubMed Central
Fig 9 Anisotropic convective effects associated with near surface blood flow. (a) Spatial map of changes in temperature at each element for a device located at the volar aspect of the wrist. The position of the thermal actuator coincides with a large vein. (b) Difference in temperature between element 11 (E11) and element 3 (E3). The results show effects of anisotropic heat flow in the wrist, compared to isotropic distributions typically observed on a region of the body such as the cheek. The vertical red dashed lines correspond to initiation and termination of heating, respectively.
Fig 9 Anisotropic convective effects associated with near surface blood flow. (a) Spatial map of changes in temperature at each element for a device located at the volar aspect of the wrist. The position of the thermal actuator coincides with a large vein. (b) Difference in temperature between element 11 (E11) and element 3 (E3). The results show effects of anisotropic heat flow in the wrist, compared to isotropic distributions typically observed on a region of the body such as the cheek. The vertical red dashed lines correspond to initiation and termination of heating, respectively.CC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 23 references

Cited by

See all 98

Metadata

Authors
Webb, R. C., Pielak, R. M., Bastien, P., Ayers, J., Niittynen, J., Kurniawan, J., Manco, M., Lin, A., Cho, N. H., Malyrchuk, V., Balooch, G., & Rogers, J. A.
Affiliations
  • University of Illinois Urbana-Champaign (US)
  • L'Oreal (United States) (US)
  • L'Oréal (France) (FR)
  • Tampere University of Technology (FI)
Corresponding author
  • Balooch, Guive
  • Rogers, John A.
Venue
PLOS ONE
Published
2015-02-06
Volume
10
Issue
2
Pages
e0118131
ISSN
1932-6203 (ISSN-L)
OpenAlex
W2034602349
Cited by
98
References
23
Citations by year
2026: 4 · 2025: 14 · 2024: 8 · 2023: 6 · 2022: 7 · 2021: 11 · 2020: 11 · 2019: 5 · 2018: 15 · 2017: 7 · 2016: 7 · 2015: 3
FWCI
4.33
Type
journal article
Language
en
Open access
Locations
  • PLoS ONE (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • DOAJ (DOAJ: Directory of Open Access Journals) (submittedVersion, cc-by-sa)
  • Figshare (submittedVersion, cc-by)
Funders
  • National Science Foundation (1144245, DGE‐1 144 245)
  • L'Oreal USA
  • Tekes
  • University of Illinois at Urbana-Champaign (DGE-1144245)
  • Division of Materials Research
Topics
  • Physical Sciences › Materials Science › Materials Chemistry › Thermal properties of materials
  • Health Sciences › Medicine › Radiology, Nuclear Medicine and Imaging › Infrared Thermography in Medicine
  • Health Sciences › Medicine › Physiology (medical) › Thermoregulation and physiological responses
Keywords
thermal transport properties, in vivo skin measurement, thermal actuators, anisotropy, epidermal thickness, stratum corneum thickness, skin hydration, body region variation, thermoregulation
MeSH terms
Algorithms, Humans, Models, Theoretical, Regional Blood Flow, Skin Physiological Phenomena, Temperature, Thermosensing, Thermal Conductivity

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: Thermal Transport Characteristics of Human Skin Measured In Vivo Using Ultrathin Conformal Arrays of Thermal Sensors and Actuators. https://app.cochat.ai/papers/10.1371/journal.pone.0118131
The paper
Webb, R. C., Pielak, R. M., Bastien, P., Ayers, J., Niittynen, J., Kurniawan, J., Manco, M., Lin, A., Cho, N. H., Malyrchuk, V., Balooch, G., & Rogers, J. A. (2015). Thermal Transport Characteristics of Human Skin Measured In Vivo Using Ultrathin Conformal Arrays of Thermal Sensors and Actuators. PLOS ONE. https://doi.org/10.1371/journal.pone.0118131

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.