The DOI matches its Crossref record; 29 of the 29 references it cites were found in a registry or an index.
Role of oxygen functional groups in reduced graphene oxide for lubrication
Open accessAbstract
Functionalized and fully characterized graphene-based lubricant additives are potential 2D materials for energy-efficient tribological applications in machine elements, especially at macroscopic contacts. Two different reduced graphene oxide (rGO) derivatives, terminated by hydroxyl and epoxy-hydroxyl groups, were prepared and blended with two different molecular weights of polyethylene glycol (PEG) for tribological investigation. Epoxy-hydroxyl-terminated rGO dispersed in PEG showed significantly smaller values of the friction coefficient. In this condition, PEG chains intercalate between the functionalized graphene sheets, and shear can take place between the PEG and rGO sheets. However, the friction coefficient was unaffected when hydroxyl-terminated rGO was coupled with PEG. This can be explained by the strong coupling between graphene sheets through hydroxyl units, causing the interaction of PEG with the rGO to be non- effective for lubrication. On the other hand, antiwear properties of hydroxyl-terminated rGO were significantly enhanced compared to epoxy-hydroxyl functionalized rGO due to the integrity of graphene sheet clusters.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Preparation of Graphitic Oxide
Hummers, W. S., & Offeman, R. E. (1958) · Journal of the American Chemical Society · doi:10.1021/ja01539a017 · Cited by 29,920
Raman Spectrum of Graphene and Graphene Layers
Ferrari, A. C., Meyer, J. C., Scardaci, V., Casiraghi, C., Lazzeri, M., Mauri, F., Piscanec, S., Jiang, D., Novoselov, K. S., Roth, S., et al. (2006) · Physical Review Letters · doi:10.1103/physrevlett.97.187401 · Cited by 15,047
The chemistry of graphene oxide
Dreyer, D. R., Park, S., Bielawski, C. W., & Ruoff, R. S. (2010) · Chem. Soc. Rev. · doi:10.1039/b917103g · Cited by 11,653
Raman spectroscopy as a versatile tool for studying the properties of graphene
Ferrari, A. C., & Basko, D. M. (2013) · Nature Nanotechnology · doi:10.1038/nnano.2013.46 · Cited by 7,405
The reduction of graphene oxide
Pei, S., & Cheng, H.-M. (2012) · Carbon · doi:10.1016/j.carbon.2011.11.010 · Cited by 5,164
Yang, D., Velamakanni, A., Bozoklu, G., Park, S., Stoller, M., Piner, R. D., Stankovich, S., Jung, I., Field, D. A., Ventrice, C. A., et al. (2009) · Carbon · doi:10.1016/j.carbon.2008.09.045 · Cited by 3,260
An improved Hummers method for eco-friendly synthesis of graphene oxide
Chen, J., Yao, B., Li, C., & Shi, G. (2013) · Carbon · doi:10.1016/j.carbon.2013.07.055 · Cited by 2,342
Colloidal Suspensions of Highly Reduced Graphene Oxide in a Wide Variety of Organic Solvents
Park, S., An, J., Jung, I., Piner, R. D., An, S. J., Li, X., Velamakanni, A., & Ruoff, R. S. (2009) · Nano Letters · doi:10.1021/nl803798y · Cited by 1,647
Graphene: a new emerging lubricant
Berman, D., Erdemir, A., & Sumant, A. V. (2014) · Materials Today · doi:10.1016/j.mattod.2013.12.003 · Cited by 1,480
Mechanical Properties of Monolayer Graphene Oxide
Suk, J. W., Piner, R. D., An, J., & Ruoff, R. S. (2010) · ACS Nano · doi:10.1021/nn101781v · Cited by 1,194
Red-, Blue-, or No-Shift in Hydrogen Bonds: A Unified Explanation
Joseph, J., & Jemmis, E. D. (2007) · Journal of the American Chemical Society · doi:10.1021/ja067545z · Cited by 990
Dispersion behaviour of graphene oxide and reduced graphene oxide
Konios, D., Stylianakis, M. M., Stratakis, E., & Kymakis, E. (2014) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2014.05.033 · Cited by 960
From Point Defects in Graphene to Two-Dimensional Amorphous Carbon
Kotakoski, J., Krasheninnikov, A. V., Kaiser, U., & Meyer, J. C. (2011) · Physical Review Letters · doi:10.1103/physrevlett.106.105505 · Cited by 773
Modification of Graphene Platelets and their Tribological Properties as a Lubricant Additive
Lin, J., Wang, L., & Chen, G. (2011) · Tribology Letters · doi:10.1007/s11249-010-9702-5 · Cited by 480
Xiao, X., Hu, J., Charych, D. H., & Salmeron, M. (1996) · Langmuir · doi:10.1021/la950771u · Cited by 397
Mechanical properties of graphene oxides
Liu, L., Zhang, J., Zhao, J., & Liu, F. (2012) · Nanoscale · doi:10.1039/c2nr31164j · Cited by 335
Extraordinary Macroscale Wear Resistance of One Atom Thick Graphene Layer
Berman, D., Deshmukh, S. A., Sankaranarayanan, S. K. R. S., Erdemir, A., & Sumant, A. V. (2014) · Advanced Functional Materials · doi:10.1002/adfm.201401755 · Cited by 309
Mungse, H. P., & Khatri, O. P. (2014) · The Journal of Physical Chemistry C · doi:10.1021/jp5033614 · Cited by 257
Graphene oxide stabilized polyethylene glycol for heat storage
Wang, C., Feng, L., Yang, H., Xin, G., Li, W., Zheng, J., Tian, W., & Li, X. (2012) · Physical Chemistry Chemical Physics · doi:10.1039/c2cp41988b · Cited by 224
Wang, L., Ma, T., Hu, Y., & Wang, H. (2012) · Physical Review B · doi:10.1103/physrevb.86.125436 · Cited by 127
Interfacial Shear Strength of Multilayer Graphene Oxide Films
Daly, M., Cao, C., Sun, H., Sun, Y., Filleter, T., & Singh, C. V. (2016) · ACS Nano · doi:10.1021/acsnano.5b05771 · Cited by 84
Mungse, H. P., Kumar, N., & Khatri, O. P. (2015) · RSC Advances · doi:10.1039/c4ra16975a · Cited by 82
Self-citationMu, L., Shi, Y., Wang, H., & Zhu, J. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b00049 · Cited by 78
Wang, H., Bi, S., Ye, Y., Xue, Y., Xie, X., & Mai, Y. (2015) · Nanoscale · doi:10.1039/c4nr06710j · Cited by 72
Gupta, B., Kumar, N., Panda, K., et al. (2016) · The Journal of Physical Chemistry C · doi:10.1021/acs.jpcc.5b08762 · Cited by 64
Self-citationGajendiran, M., Yousuf, S. M. J., Vellaichamy, E., & Balasubramanian, S. (2013) · Journal of Materials Chemistry B · doi:10.1039/c3tb21113d · Cited by 61
Kobayashi, M., Koide, T., & Hyon, S. (2014) · Journal of the mechanical behavior of biomedical materials/Journal of mechanical behavior of biomedical materials · doi:10.1016/j.jmbbm.2014.06.003 · Cited by 53
Enriching Heteroelements in Lignin as Lubricating Additives for Bioionic Liquids
Mu, L., Shi, Y., Guo, X.-J., Wu, J., Ji, T., Chen, L., Feng, X. F., Lü, X., Hua, J., & Zhu, J. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b00669 · Cited by 42
Cited by
Electrochemical Impedance Spectroscopy (EIS): Principles, Construction, and Biosensing Applications
Magar, H. S., Hassan, R. Y. A., & Mulchandani, A. (2021) · Sensors · doi:10.3390/s21196578 · Cited by 1,335
Brisebois, P. P., & Siaj, M. (2020) · Journal of Materials Chemistry C · doi:10.1039/c9tc03251g · Cited by 445
Mondal, A., Prabhakaran, A., Gupta, S., & Subramanian, V. R. (2021) · ACS Omega · doi:10.1021/acsomega.0c06045 · Cited by 277
Pham, T. M., Liu, N., Bartling, S., Rockstroh, N., Eckelt, R., Ju, W., Surkus, A.-E., & Francke, R. (2025) · Journal of Catalysis · doi:10.1016/j.jcat.2025.116299 · Cited by 6
Metadata
- Authors
- Gupta, B., Kumar, N., Panda, K., Kanan, V., Joshi, S., & Visoly-Fisher, I.
- Venue
- Scientific Reports
- Published
- 2017-03-27
- Volume
- 7
- Issue
- 1
- Pages
- 45030-45030
- ISSN
- 2045-2322 (ISSN-L)
- OpenAlex
- W2599526570
- Cited by
- 620
- References
- 29
- FWCI
- 29.11
- Type
- journal article
- Language
- en
- Open access
- gold
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.