Student or educator? Sign up with your school email and get 6 months of Pro free.
CoChat

The DOI matches its Crossref record; 37 of the 38 references it cites were found in a registry or an index.

High-Q photonic resonators and electro-optic coupling using silicon-on-lithium-niobate

Open access
Witmer, Jeremy D., Valery, Joseph A., Arrangoiz-Arriola, Patricio, Sarabalis, Christopher J., Hill, Jeff T., Safavi-Naeini, Amir H. · 2017 · Scientific Reports

Abstract

Future quantum networks, in which superconducting quantum processors are connected via optical links, will require microwave-to-optical photon converters that preserve entanglement. A doubly-resonant electro-optic modulator (EOM) is a promising platform to realize this conversion. Here, we present our progress towards building such a modulator by demonstrating the optically-resonant half of the device. We demonstrate high quality ( Q ) factor ring, disk and photonic crystal resonators using a hybrid silicon-on-lithium-niobate material system. Optical Q factors up to 730,000 are achieved, corresponding to propagation loss of 0.8 dB/cm. We also use the electro-optic effect to modulate the resonance frequency of a photonic crystal cavity, achieving a electro-optic modulation coefficient between 1 and 2 pm/V. In addition to quantum technology, we expect that our results will be useful both in traditional silicon photonics applications and in high-sensitivity acousto-optic devices.

Overview

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Integrity signals

Registry

Crossref · 10.1038/srep46313

Cites

37 of 37 references verified0 citation errors · 0 not checkable

Statistics

Figures

Figure 1 Fabrication of SiLN electro-optic devices. (a) The SiLN fabrication process, showing e-beam lithography and etching of photonic structures into an SOI die, bonding to LN, removing the backside silicon, and patterning electrodes. (b) An optical microscope image showing fabricated ring, disk and photonic crystal structures. (c) A scanning electron micrograph image of a SiLN photonic crystal with electrodes.
Figure 1 Fabrication of SiLN electro-optic devices. (a) The SiLN fabrication process, showing e-beam lithography and etching of photonic structures into an SOI die, bonding to LN, removing the backside silicon, and patterning electrodes. (b) An optical microscope image showing fabricated ring, disk and photonic crystal structures. (c) A scanning electron micrograph image of a SiLN photonic crystal with electrodes.CC BY · PubMed Central
Figure 2 Experimental setup. (a) Diagram of the experimental setup for making optical transmission measurements. (b) Scanning electron micrograph of a typical SiLN grating coupler used in these experiments.
Figure 2 Experimental setup. (a) Diagram of the experimental setup for making optical transmission measurements. (b) Scanning electron micrograph of a typical SiLN grating coupler used in these experiments.CC BY · PubMed Central
Figure 3 Transmission measurement results. (a,d,g) Optical microscope images showing a microring, microdisk and photonic crystal respectively. For each structure, a spectrum of transmitted optical power vs. wavelength is shown (b,e,h). In (b) and (e) the Gaussian transmission window of the grating couplers is apparent, while in (h) the dashed-red line shows approximately the grating coupler envelope. The enlarged plots (c,f,i) show high-Q modes for each of the three structures. Loaded Q’s were calculated by fitting a Lorentzian function to the peaks/dips. The dashed black line shows a polynomial fit to the background.
Figure 3 Transmission measurement results. (a,d,g) Optical microscope images showing a microring, microdisk and photonic crystal respectively. For each structure, a spectrum of transmitted optical power vs. wavelength is shown (b,e,h). In (b) and (e) the Gaussian transmission window of the grating couplers is apparent, while in (h) the dashed-red line shows approximately the grating coupler envelope. The enlarged plots (c,f,i) show high-Q modes for each of the three structures. Loaded Q’s were calculated by fitting a Lorentzian function to the peaks/dips. The dashed black line shows a polynomial fit to the background.CC BY · PubMed Central
Figure 4 Electro-optic shift of cavity resonance frequency. (a) A density plot of showing the average transmitted power through the photonic crystal as a function of applied drive voltage and laser wavelength. An apparent separation of the fundamental photonic crystal cavity mode is generated by applying the oscillating square-wave voltage. (b) The fundamental cavity mode with an applied square-wave voltage of 20 V peak-to-peak. The separation of 25.2 pm is obtained by fitting a sum of two displaced lineshapes (red) of the undriven system to the data. (c) A piecewise linear fit to the separation vs. applied voltage gives an EO modulation coefficient of 0.96 pm/V for lower voltages and 1.93 pm/V for larger voltages.
Figure 4 Electro-optic shift of cavity resonance frequency. (a) A density plot of showing the average transmitted power through the photonic crystal as a function of applied drive voltage and laser wavelength. An apparent separation of the fundamental photonic crystal cavity mode is generated by applying the oscillating square-wave voltage. (b) The fundamental cavity mode with an applied square-wave voltage of 20 V peak-to-peak. The separation of 25.2 pm is obtained by fitting a sum of two displaced lineshapes (red) of the undriven system to the data. (c) A piecewise linear fit to the separation vs. applied voltage gives an EO modulation coefficient of 0.96 pm/V for lower voltages and 1.93 pm/V for larger voltages.CC BY · PubMed Central

Verification

Claims the paper makes

The claims and statistics of this paper haven’t been checked yet.

Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.

A few free checks a day · papers already verified open instantly · results are public

Claims other papers make about this one

Each is checked against this paper’s own text: does it say what the citing paper says it does?

Self-check

Percentages, sums and reported differences re-computed from the paper’s own numbers.

The self-check needs the paper’s full text.

Citations

Cites

Show all 38 references

Research works printed but not linked: 2

  1. Tsang, M. Cavity quantum electro-optics. II. Input-output relations between traveling optical and microwave fields. Phys. Rev. A 84, 043845 (2011).
  2. Wang, R. & Bhave, S. A. Free-standing high quality factor thin-film lithium niobate micro-photonic disk resonators. arXiv:1409.6351 (2014). · arXiv

Cited by

See all 93

Metadata

Authors
Witmer, J. D., Valery, J. A., Arrangoiz-Arriola, P., Sarabalis, C. J., Hill, J. T., & Safavi-Naeini, A. H.
Affiliations
Stanford University (US)
Corresponding author
Witmer, Jeremy D.
Venue
Scientific Reports
Published
2017-04-13
Volume
7
Issue
1
Pages
46313-46313
ISSN
2045-2322 (ISSN-L)
OpenAlex
W2580026525
Cited by
93
References
38
Citations by year
2026: 5 · 2025: 6 · 2024: 6 · 2023: 3 · 2022: 11 · 2021: 16 · 2020: 18 · 2019: 14 · 2018: 9 · 2017: 4
FWCI
5.11
Type
journal article
Language
en
Open access
Licence
Locations
  • Scientific Reports (publishedVersion, cc-by)
  • PubMed Central (publishedVersion, cc-by)
  • PubMed (publishedVersion)
  • arXiv (Cornell University) (submittedVersion)
  • arXiv (Cornell University)
Funders
  • National Science Foundation (1509107)
  • Schweizerischer Nationalfonds zur Förderung der Wissenschaftlichen Forschung
  • Division of Electrical, Communications and Cyber Systems
Topics
  • Physical Sciences › Engineering › Electrical and Electronic Engineering › Photonic and Optical Devices
  • Physical Sciences › Physics and Astronomy › Atomic and Molecular Physics, and Optics › Photorefractive and Nonlinear Optics
  • Physical Sciences › Physics and Astronomy › Atomic and Molecular Physics, and Optics › Mechanical and Optical Resonators
Keywords
hybrid silicon photonics, electro-optic modulation, photonic crystal cavities, ring resonator, disk resonators, optical quality factor, path loss, quantum networks, acousto-optic devices

About these checks

Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.

Statistics and arithmetic are recomputed, not judged.

Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.

What counts as a claim ›How we measure confidence ›How we check this ›

Are you an author, or do you see a problem with this page? Request a review

How to cite

Cite CoChat for the checks on this page, and the paper for its own findings.

This page
CoChat. (2026). Citation check: High-Q photonic resonators and electro-optic coupling using silicon-on-lithium-niobate. https://app.cochat.ai/papers/10.1038/srep46313
The paper
Witmer, J. D., Valery, J. A., Arrangoiz-Arriola, P., Sarabalis, C. J., Hill, J. T., & Safavi-Naeini, A. H. (2017). High-Q photonic resonators and electro-optic coupling using silicon-on-lithium-niobate. Scientific Reports. https://doi.org/10.1038/srep46313

Data sources

Bibliographic data: Semantic Scholar, OpenAlex, Crossref.

Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).

Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.