The DOI matches its Crossref record; 46 of the 46 references it cites were found in a registry or an index.
Anisotropic wetting on tunable micro-wrinkled surfaces
Abstract
We examine the wettability of rough surfaces through a measurement approach that harnesses a wrinkling instability to produce model substrate topographies. Specifically, we probe the wetting of liquids on anisotropic micro-wrinkled features that exhibit well-defined aspect ratios (amplitude wavelength of the wrinkles) that can be actively tuned. Our study provides new insight into the wetting behavior on rough surfaces and into the interpretation of related liquid contact-angle measurements. In particular, we find that droplet wetting anisotropy is governed primarily by the roughness aspect ratio. In addition, comparison of our measurements to theoretical models demonstrates that droplet distortions and observed contact angles on surfaces with a strongly anisotropic texture can be quantitatively attributed to the difference in the energetic barriers to wetting along and perpendicular to substrate features.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Wettability of porous surfaces
Cassie, A. B. D., & Baxter, S. (1944) · Transactions of the Faraday Society · doi:10.1039/tf9444000546 · Cited by 13,807
RESISTANCE OF SOLID SURFACES TO WETTING BY WATER
Wenzel, R. N. (1936) · Industrial & Engineering Chemistry · doi:10.1021/ie50320a024 · Cited by 13,316
Lafuma, A., & Quéré, D. (2003) · Nature Materials · doi:10.1038/nmat924 · Cited by 3,315
Bowden, N., Brittain, S., Evans, A. G., Hutchinson, J. W., & Whitesides, G. M. (1998) · Nature · doi:10.1038/30193 · Cited by 2,305
Design and Creation of Superwetting/Antiwetting Surfaces
Feng, X. J., & Jiang, L. (2006) · Advanced Materials · doi:10.1002/adma.200501961 · Cited by 2,030
Analysis and design of structural sandwich panels
Ogorkiewicz, R. M. (1970) · Composites · doi:10.1016/0010-4361(70)90244-2 · Cited by 1,759
Ultrahydrophobic Surfaces. Effects of Topography Length Scales on Wettability
Öner, D., & McCarthy, T. J. (2000) · Langmuir · doi:10.1021/la000598o · Cited by 1,754
Chaudhury, M. K., & Whitesides, G. M. (1992) · Science · doi:10.1126/science.256.5063.1539 · Cited by 1,668
A buckling-based metrology for measuring the elastic moduli of polymeric thin films
Stafford, C. M., Harrison, C., Beers, K. L., Karim, A., Amis, E. J., VanLandingham, M. R., Kim, H.-C., Volksen, W., Miller, R. D., & Simonyi, E. E. (2004) · Nature Materials · doi:10.1038/nmat1175 · Cited by 1,360
Self-citationUltrahydrophobic and Ultralyophobic Surfaces: Some Comments and Examples
Chen, W., Fadeev, A. Y., Hsieh, M. C., Öner, D., Youngblood, J., & McCarthy, T. J. (1999) · Langmuir · doi:10.1021/la990074s · Cited by 1,190
Self-citation
Cited by
Stimulus-responsive shape memory materials: a review
Sun, L., Huang, W. M., Ding, Z., Zhao, Y., Wang, C. C., Purnawali, H., & Tang, C. (2012) · Materials & Design · doi:10.1016/j.matdes.2011.04.065 · Cited by 1,105
Feeling small: exploring the tactile perception limits
Skedung, L., Arvidsson, M., Chung, J. Y., Stafford, C. M., Berglund, B., & Rutland, M. W. (2013) · Scientific Reports · doi:10.1038/srep02617 · Cited by 285
“Sixteen patterned surfaces ranging in surface wavelength from 270 nm up to 90 m m, as well as two blank surfaces, were prepared in duplicate by employing surface wrinkling 29–31 as depicted in Fig.”
MethodChen, C.-M., Chiang, C.-L., & Yang, S. (2015) · Langmuir · doi:10.1021/acs.langmuir.5b02622 · Cited by 32
Metadata
- Authors
- Chung, J. Y., Youngblood, J. P., & Stafford, C. M.
- Venue
- Soft Matter
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2007
- Volume
- 3
- Issue
- 9
- Pages
- 1163
- ISSN
- 1744-683X (ISSN-L)
- 1744-6848
- OpenAlex
- W2055723408
- Cited by
- 444
- References
- 46
- FWCI
- 9.45
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
How to cite
Cite CoChat for the checks on this page, and the paper for its own findings.
- This page
- CoChat. (2026). Citation check: Anisotropic wetting on tunable micro-wrinkled surfaces. https://app.cochat.ai/papers/10.1039/b705112c
- The paper
- Chung, J. Y., Youngblood, J. P., & Stafford, C. M. (2007). Anisotropic wetting on tunable micro-wrinkled surfaces. Soft Matter. https://doi.org/10.1039/b705112c
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.