The DOI matches its Crossref record; 28 of the 28 references it cites were found in a registry or an index.
Hypercrosslinked polyanilines with nanoporous structure and high surface area: potential adsorbents for hydrogen storage
Abstract
A method for the preparation of an entirely new type of nanoporous material, hypercrosslinked polyaniline, with permanent porous structure and specific surface areas exceeding 630 m2 g−1 has been developed. The hypercrosslinking reaction was carried out with commercial polyaniline and diiodoalkanes or paraformaldehyde using both conventional and microwave assisted processes. Polyaniline swollen in an organic solvent was hypercrosslinked to form a rigid, mesh-like structure with permanent porosity and a high surface area. The resulting materials were characterized using infrared spectroscopy and elemental analysis. Porous properties were determined by means of scanning electron microscopy as well as nitrogen and hydrogen adsorption. Short crosslinks such as those formed using paraformaldehyde and diiodomethane led to materials with the highest surface areas. Surface area also increased with the concentration of polyaniline in solution used during preparation. The hydrogen storage capacities of these materials were also tested and a capacity of 2.2 wt% at 77 K and 3.0 MPa was found for the best adsorbent. Hypercrosslinked polyanilines exhibit a remarkably high affinity for hydrogen, which results in enthalpies of adsorption as high as 9.3 kJ mol−1 (exothermic), in sharp contrast with hypercrosslinked polystyrenes and metal–organic frameworks for which significantly lower enthalpies of adsorption, typically in the range of 4–7 kJ mol−1, are measured.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Safe and Convenient Procedure for Solvent Purification
Pangborn, A. B., Giardello, M. A., Grubbs, R. H., Rosen, R. K., & Timmers, F. J. (1996) · Organometallics · doi:10.1021/om9503712 · Cited by 2,737
Conducting polymers in electronic chemical sensors
Janata, J., & Josowicz, M. (2003) · Nature Materials · doi:10.1038/nmat768 · Cited by 1,349
Hydrogen Storage in a Microporous Metal−Organic Framework with Exposed Mn2+ Coordination Sites
Dincǎ, M., Dailly, A., Liu, Y., Brown, C. M., Neumann, D. A., & Long, J. R. (2006) · Journal of the American Chemical Society · doi:10.1021/ja0656853 · Cited by 1,137
Optimum Conditions for Adsorptive Storage
Bhatia, S. K., & Myers, A. L. (2006) · Langmuir · doi:10.1021/la0523816 · Cited by 1,113
Free-energy density functional for hard spheres
Tarazona, P. (1985) · Physical Review A · doi:10.1103/physreva.31.2672 · Cited by 1,065
Hydrogen Storage in the Dehydrated Prussian Blue Analogues M3[Co(CN)6]2 (M = Mn, Fe, Co, Ni, Cu, Zn)
Kaye, S. S., & Long, J. R. (2005) · Journal of the American Chemical Society · doi:10.1021/ja051168t · Cited by 888
Macroporous copolymer networks
Okay, O. (2000) · Progress in Polymer Science · doi:10.1016/s0079-6700(00)00015-0 · Cited by 765
Dincǎ, M., & Long, J. R. (2005) · Journal of the American Chemical Society · doi:10.1021/ja0523082 · Cited by 736
Hydrogen Storage in Microporous Hypercrosslinked Organic Polymer Networks
Wood, C. D., Tan, B., Trewin, A., Niu, H., Bradshaw, D., Rosseinsky, M. J., Khimyak, Y. Z., Campbell, N. L., Kirk, R., Stöckel, E., et al. (2007) · Chemistry of Materials · doi:10.1021/cm070356a · Cited by 704
Phase equilibria of fluid interfaces and confined fluids: Non-local versus local density functionals
Tarazona, P., Marconi, U. M. B., & Evans, R. (1987) · Molecular Physics · doi:10.1080/00268978700100381 · Cited by 640
Lochan, R. C., & Head-Gordon, M. (2006) · Physical Chemistry Chemical Physics · doi:10.1039/b515409j · Cited by 550
Porous structure of hypercrosslinked polystyrene: State-of-the-art mini-review
Tsyurupa, M. P., & Davankov, V. A. (2006) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2005.11.004 · Cited by 509
Davankov, V. A., & Tsyurupa, M. P. (1990) · Reactive Polymers · doi:10.1016/0923-1137(90)90038-6 · Cited by 493
Hypercrosslinked polymers: basic principle of preparing the new class of polymeric materials
Tsyurupa, M. P., & Davankov, V. A. (2002) · Reactive and Functional Polymers · doi:10.1016/s1381-5148(02)00173-6 · Cited by 418
Observation of Cu2+–H2 Interactions in a Fully Desolvated Sodalite‐Type Metal–Organic Framework
Dincă, M., Han, W. S., Liu, Y., Dailly, A., Brown, C. M., & Long, J. R. (2007) · Angewandte Chemie International Edition · doi:10.1002/anie.200604362 · Cited by 414
Polyaniline-deposited porous carbon electrode for supercapacitor
Chen, W.-C., Wen, T.-C., & Teng, H. (2003) · Electrochimica Acta · doi:10.1016/s0013-4686(02)00734-x · Cited by 364
Hydrogen adsorption in microporous hypercrosslinked polymers
Lee, J.-Y., Wood, C. D., Bradshaw, D., Rosseinsky, M. J., & Cooper, A. I. (2006) · Chemical Communications · doi:10.1039/b604625h · Cited by 352
Synthesis and applications of one-dimensional nano-structured polyaniline: An overview
Zhang, D., & Wang, Y. (2006) · Materials Science and Engineering: B · doi:10.1016/j.mseb.2006.07.037 · Cited by 334
High Surface Area Nanoporous Polymers for Reversible Hydrogen Storage
Germain, J., Hradil, J., Fréchet, J. M. J., & Svec, F. (2006) · Chemistry of Materials · doi:10.1021/cm061186p · Cited by 323
Self-citationRowsell, J. L. C., Eckert, J., & Yaghi, O. M. (2005) · Journal of the American Chemical Society · doi:10.1021/ja0542690 · Cited by 294
Superhigh surface area determination of microporous solids
Kaneko, K., & Ishii, C. (1992) · Colloids and Surfaces · doi:10.1016/0166-6622(92)80299-h · Cited by 282
Combinatorial Search for Optimal Hydrogen-Storage Nanomaterials Based on Polymers
Lee, H., Choi, W. I., & Ihm, J. (2006) · Physical Review Letters · doi:10.1103/physrevlett.97.056104 · Cited by 262
Conductive polymer-coated fabrics for chemical sensing
Collins, G. E., & Buckley, L. J. (1996) · Synthetic Metals · doi:10.1016/0379-6779(96)80108-1 · Cited by 246
The potential of organic polymer-based hydrogen storage materials
Budd, P. M., Butler, A., Selbie, J., Mahmood, K., McKeown, N. B., Ghanem, B., Msayib, K., Book, D., & Walton, A. (2007) · Physical Chemistry Chemical Physics · doi:10.1039/b618053a · Cited by 218
Microporous Polymers as Potential Hydrogen Storage Materials
McKeown, N. B., Budd, P. M., & Book, D. (2007) · Macromolecular Rapid Communications · doi:10.1002/marc.200700054 · Cited by 191
Porosity, Surface Area, Surface Energy, and Hydrogen Adsorption in Nanostructured Carbons
Ansón‐Casaos, A., Jagiełło, J., Parra, J. B., Sanjuán, M. L., Benito, A. M., Maser, W. K., & Martínez, M. T. (2004) · The Journal of Physical Chemistry B · doi:10.1021/jp047253p · Cited by 127
Surface Polymerization of Aniline on Silica Gel
Stejskal, J., Trchová, M., Fedorova, S. V., Sapurina, I. Y., & Zemek, J. (2003) · Langmuir · doi:10.1021/la026672f · Cited by 95
Preparation of polyaniline microspheres with nanostructured surfaces by a solids-stabilized emulsion
He, Y. (2005) · Materials Letters · doi:10.1016/j.matlet.2005.02.047 · Cited by 29
Cited by
Carbon Dioxide Capture: Prospects for New Materials
D'Alessandro, D. M., Smit, B., & Long, J. R. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.201000431 · Cited by 4,046
Porous, Covalent Triazine‐Based Frameworks Prepared by Ionothermal Synthesis
Kuhn, P., Antonietti, M., & Thomas, A. (2008) · Angewandte Chemie International Edition · doi:10.1002/anie.200705710 · Cited by 2,634
Design and Preparation of Porous Polymers
Wu, D., Xu, F., Sun, B., Fu, R., He, H., & Matyjaszewski, K. (2012) · Chemical Reviews · doi:10.1021/cr200440z · Cited by 1,748
Advances in Conjugated Microporous Polymers
Lee, J.-S. M., & Cooper, A. I. (2020) · Chemical Reviews · doi:10.1021/acs.chemrev.9b00399 · Cited by 1,394
Hypercrosslinked porous polymer materials: design, synthesis, and applications
Tan, L., & Tan, B. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00851h · Cited by 1,357
Metadata
- Authors
- Germain, J., Fréchet, J. M. J., & Svec, F.
- Venue
- Journal of Materials Chemistry
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2007
- Volume
- 17
- Issue
- 47
- Pages
- 4989
- ISSN
- 0959-9428 (ISSN-L)
- 1364-5501
- OpenAlex
- W2043113572
- Cited by
- 327
- References
- 28
- FWCI
- 8.96
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.