The DOI matches its Crossref record; 25 of the 25 references it cites were found in a registry or an index.
Hard templating synthesis of mesoporous and nanowire SnO2 lithium battery anode materials
Abstract
Mesoporous and nanowire SnO2 anode materials for lithium batteries were prepared using KIT-6 and SBA-15 SiO2 templates, and their electrochemical properties were compared at different current rates. The as-prepared SnO2nanowires had a diameter of 6 nm and a length of >3 μm and Brunauer–Emmett–Teller (BET) surface area of 80 m2 g−1 while mesoporous SnO2 showed a pore size of 3.8 nm and a BET surface area of 160 m2 g−1. The charge capacities of these two anodes were similar to each other at 800 mAh g−1, but mesoporous SnO2 showed much improved cycle life performance and rate capabilities because of its higher surface area than nanowire SnO2. Especially, the capacity retention of the mesoporous SnO2 was 98%, compared with 31% for the SnO2nanowires at a 10 C rate (= 4000 mA g−1). The improved electrochemical performance of the mesoporous SnO2 was related to the regular porosity which permitted thorough flooding of the electrolyte between the particles, and the mesopores which acted as a buffer zone during the volume contraction and expansion of Sn.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Tin-Based Amorphous Oxide: A High-Capacity Lithium-Ion-Storage Material
Idota, Y., Kubota, T., Matsufuji, A., Maekawa, Y., & Miyasaka, T. (1997) · Science · doi:10.1126/science.276.5317.1395 · Cited by 2,578
Template‐Free Synthesis of SnO2 Hollow Nanostructures with High Lithium Storage Capacity
Lou, X. W., Wang, Y., Yuan, C., Lee, J. Y., & Archer, L. A. (2006) · Advanced Materials · doi:10.1002/adma.200600733 · Cited by 1,638
Kleitz, F., Hei Choi, S., & Ryoo, R. (2003) · Chemical Communications · doi:10.1039/b306504a · Cited by 1,455
Park, M., Wang, G., Kang, Y., Wexler, D., Dou, S., & Liu, H. (2007) · Angewandte Chemie International Edition · doi:10.1002/anie.200603309 · Cited by 861
Critical Size of a Nano SnO2 Electrode for Li-Secondary Battery
Kim, C., Noh, M., Choi, M., Cho, J., & Park, B. (2005) · Chemistry of Materials · doi:10.1021/cm048003o · Cited by 519
Self-citationWang, Y., Zeng, H. C., & Lee, J. Y. (2006) · Advanced Materials · doi:10.1002/adma.200501883 · Cited by 493
Tian, B., Liu, X., Yang, H., Xie, S., Yu, C., Tu, B., & Zhao, D. (2003) · Advanced Materials · doi:10.1002/adma.200305211 · Cited by 426
Laser Ablation Synthesis and Electron Transport Studies of Tin Oxide Nanowires
Liu, Z., Zhang, D., Han, S., Li, C., Tang, T., Jin, W., Liu, X., Lei, B., & Zhou, C. (2003) · Advanced Materials · doi:10.1002/adma.200305439 · Cited by 409
Low‐Temperature Fabrication of Highly Crystalline SnO2 Nanorods
Zhang, D. ‐., Sun, L. ‐., Yin, J. ‐., & Yan, C. ‐. (2003) · Advanced Materials · doi:10.1002/adma.200304899 · Cited by 389
Wang, Y., Su, F., Lee, J. Y., & Zhao, X. S. (2006) · Chemistry of Materials · doi:10.1021/cm052219o · Cited by 387
Cited by
Recent developments in nanostructured anode materials for rechargeable lithium-ion batteries
Ji, L., Lin, Z., Alcoutlabi, M., & Zhang, X. (2011) · Energy & Environmental Science · doi:10.1039/c0ee00699h · Cited by 2,240
Review on recent progress of nanostructured anode materials for Li-ion batteries
Goriparti, S., Miele, E., De Angelis, F., Di Fabrizio, E., Proietti Zaccaria, R., & Capiglia, C. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.11.103 · Cited by 2,092
Li-alloy based anode materials for Li secondary batteries
Park, C.-M., Kim, J.-H., Kim, H., & Sohn, H.-J. (2010) · Chemical Society Reviews · doi:10.1039/b919877f · Cited by 1,703
Self-citationMetal Oxide Nanostructures and Their Gas Sensing Properties: A Review
Sun, Y.-F., Liu, S.-B., Meng, F.-L., Liu, J.-Y., Jin, Z., Kong, L.-T., & Liu, J.-H. (2012) · Sensors · doi:10.3390/s120302610 · Cited by 1,218
Zhao, Y., Li, X., Yan, B., Xiong, D., Li, D., Lawes, S., & Sun, X. (2016) · Advanced Energy Materials · doi:10.1002/aenm.201502175 · Cited by 910
Green energy storage materials: Nanostructured TiO2 and Sn-based anodes for lithium-ion batteries
Deng, D., Kim, M. G., Lee, J. Y., & Cho, J. (2009) · Energy & Environmental Science · doi:10.1039/b823474d · Cited by 891
Self-citation25th Anniversary Article: Semiconductor Nanowires – Synthesis, Characterization, and Applications
Dasgupta, N. P., Sun, J., Liu, C., Brittman, S., Andrews, S. C., Lim, J., Gao, H., Yan, R., & Yang, P. (2014) · Advanced Materials · doi:10.1002/adma.201305929 · Cited by 880
Ordered mesoporous metal oxides: synthesis and applications
Ren, Y., Ma, Z., & Bruce, P. G. (2012) · Chemical Society Reviews · doi:10.1039/c2cs35086f · Cited by 768
Porous electrode materials for lithium-ion batteries–how to prepare them and what makes them special
Vu, A., Qian, Y., & Stein, A. (2012) · Advanced Energy Materials · doi:10.1002/aenm.201200320 · Cited by 719
Nanowire Electrodes for Electrochemical Energy Storage Devices
Mai, L., Tian, X., Xu, X., Chang, L., & Xu, L. (2014) · Chemical Reviews · doi:10.1021/cr500177a · Cited by 700
Ordered Mesoporous Metallic MoO2 Materials with Highly Reversible Lithium Storage Capacity
Shi, Y., Guo, B., Corr, S. A., Shi, Q., Hu, Y.-S., Heier, K. R., Chen, L., Seshadri, R., & Stucky, G. D. (2009) · Nano Letters · doi:10.1021/nl902423a · Cited by 683
Synthesis of non-siliceous mesoporous oxides
Gu, D., & Schüth, F. (2014) · Chem. Soc. Rev. · doi:10.1039/c3cs60155b · Cited by 584
Kim, H., & Cho, J. (2008) · Nano Letters · doi:10.1021/nl801853x · Cited by 513
Self-citationHan, X., Jin, M., Xie, S., Kuang, Q., Jiang, Z., Jiang, Y., Xie, Z., & Zheng, L. (2009) · Angewandte Chemie International Edition · doi:10.1002/anie.200903926 · Cited by 471
Liu, H., Wang, G., Liu, J., Qiao, S., & Ahn, H. (2011) · Journal of Materials Chemistry · doi:10.1039/c0jm03132a · Cited by 455
Lou, X. W., Chen, J. S., Chen, P., & Archer, L. A. (2009) · Chemistry of Materials · doi:10.1021/cm900613d · Cited by 430
Li, X., Meng, X., Liu, J., Geng, D., Zhang, Y., Banis, M. N., Li, Y., Yang, J., Li, R., Sun, X., et al. (2012) · Advanced Functional Materials · doi:10.1002/adfm.201101068 · Cited by 417
A SnO2/graphene composite as a high stability electrode for lithium ion batteries
Wang, X., Zhou, X., Yao, K., Zhang, J., & Liu, Z. (2011) · Carbon · doi:10.1016/j.carbon.2010.08.052 · Cited by 409
A Chronicle Review of Nonsilicon (Sn, Sb, Ge)‐Based Lithium/Sodium‐Ion Battery Alloying Anodes
Liang, S., Cheng, Y., Zhu, J., Xia, Y., & Müller‐Buschbaum, P. (2020) · Small Methods · doi:10.1002/smtd.202000218 · Cited by 383
Jiang, J., Li, Y., Liu, J., & Huang, X. (2011) · Nanoscale · doi:10.1039/c0nr00472c · Cited by 344
Porous Si anode materials for lithium rechargeable batteries
Cho, J. (2010) · Journal of Materials Chemistry · doi:10.1039/b923002e · Cited by 340
Self-citationWang, D., Yang, J., Li, X., Geng, D., Li, R., Cai, M., Sham, T.-K., & Sun, X. (2013) · Energy & Environmental Science · doi:10.1039/c3ee40829a · Cited by 340
Influence of Size on the Rate of Mesoporous Electrodes for Lithium Batteries
Ren, Y., Armstrong, A. R., Jiao, F., & Bruce, P. G. (2010) · Journal of the American Chemical Society · doi:10.1021/ja905488x · Cited by 282
Recent Progress in Nanostructured Cathode Materials for Lithium Secondary Batteries
Song, H., Lee, K. T., Kim, M. G., Nazar, L. F., & Cho, J. (2010) · Advanced Functional Materials · doi:10.1002/adfm.201000231 · Cited by 278
Self-citationHigh performance Ge nanowire anode sheathed with carbon for lithium rechargeable batteries
Seo, M.-H., Park, M., Lee, K. T., Kim, K., Kim, J., & Cho, J. (2011) · Energy Environ. Sci. · doi:10.1039/c0ee00552e · Cited by 277
Self-citationGraphene‐Based Mesoporous SnO2 with Enhanced Electrochemical Performance for Lithium‐Ion Batteries
Yang, S., Yue, W., Zhu, J., Ren, Y., & Yang, X. (2013) · Advanced Functional Materials · doi:10.1002/adfm.201203286 · Cited by 262
Zhao, G., Wen, T., Chen, C., & Wang, X. (2012) · RSC Advances · doi:10.1039/c2ra20990j · Cited by 254
Metadata
- Authors
- Kim, H., & Cho, J.
- Venue
- Journal of Materials Chemistry
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2008
- Volume
- 18
- Issue
- 7
- Pages
- 771
- ISSN
- 0959-9428 (ISSN-L)
- 1364-5501
- OpenAlex
- W2106238101
- Cited by
- 274
- References
- 25
- FWCI
- 23.61
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.