Bionanocomposites based on poly(ε-caprolactone)-grafted cellulose nanocrystals by ring-opening polymerization
The DOI matches its Crossref record; 36 of the 36 references it cites were found in a registry or an index.
Abstract
A ‘grafting from’ approach was used to graft poly(ε-caprolactone) (PCL) polymers to cellulose nanocrystals by Sn(Oct)2-catalyzed ring-opening polymerization (ROP). The grafting efficiency was evidenced by the long-term stability of suspension of PCL-grafted cellulose nanocrystals in toluene. These observations were confirmed by Fourier Transform Infrared Spectroscopy (FT-IR) and Time-of-Flight Secondary Ion Mass Spectrometry (TOF-SIMS). Extracted nanohybrids were characterized by Differential Scanning Calorimetry (DSC), X-ray photoelectron spectroscopy (XPS), and contact angle measurements. The morphology and crystalline structure of the PCL-grafted cellulose nanocrystals was examined by transmission electron microscopy (TEM) and X-Ray diffraction, respectively. Results showed that cellulose nanocrystals kept their initial morphological integrity and their native crystallinity. Nanocomposites with high content of cellulose nanocrystals were prepared using either neat cellulose nanocrystals or PCL-grafted cellulose nanocrystals and high molecular weight PCL as matrix using a casting/evaporation technique. Thermo-mechanical properties of processed nanocomposites were studied by DSC, dynamical mechanical analyses (DMA) and tensile tests. A significant improvement in terms of Young's modulus and storage modulus was obtained.
Overview
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
Claims other papers make about this one
Each is checked against this paper’s own text: does it say what the citing paper says it does?
In the citing paper
“Modified nanocrystals were stable in apolar solvents such as toluene even after 24 h.”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [36]
In the citing paper
“However, the presence of whiskers tends to decrease the elongation at break of the nanocomposites compared to the neat matrix [36,117].”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [36]
In the citing paper
“The improvement of strength and modulus of polymers, especially above the glass transition temperature (Tg) of the host polymeric matrix, is widely described in the literature [36,134].”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [36]
In the citing paper
“Mechanical properties of grafted nanocrystals reinforced nanocomposites were improved compared to ungrafted ones.”
From Cellulosic Bionanocomposites: A Review of Preparation, Properties and Applications (2010) · cites this paper as [36]
Citations
Cites
Azizi Samir, M. A. S., Alloin, F., & Dufresne, A. (2005) · Biomacromolecules · doi:10.1021/bm0493685 · Cited by 2,311
Self-citationPolymer brushes: surface-immobilized macromolecules
Zhao, B., & Brittain, W. J. (2000) · Progress in Polymer Science · doi:10.1016/s0079-6700(00)00012-5 · Cited by 1,628
Biodegradable polyesters for medical and ecological applications
Ikada, Y., & Tsuji, H. (2000) · Macromolecular Rapid Communications · doi:10.1002/(sici)1521-3927(20000201)21:3<117::aid-marc117>3.0.co;2-x · Cited by 1,512
Chemical syntheses of biodegradable polymers
Okada, M. (2002) · Progress in Polymer Science · doi:10.1016/s0079-6700(01)00039-9 · Cited by 1,199
Elazzouzi-Hafraoui, S., Nishiyama, Y., Putaux, J.-L., Heux, L., Dubreuil, F., & Rochas, C. (2008) · Biomacromolecules · doi:10.1021/bm700769p · Cited by 1,182
An Introduction to Surface Analysis by XPS and AES
Watts, J. F., & Wolstenholme, J. (2003) · Wiley eBooks · doi:10.1002/0470867930 · Cited by 938
Rodlike cellulose microcrystals: Structure, properties and applications
de Souza Lima, M. M., & Borsali, R. (2004) · Macromolecular Rapid Communications · doi:10.1002/marc.200300268 · Cited by 894
Thermal degradation behaviors of spherical cellulose nanocrystals with sulfate groups
Wang, N., Ding, E., & Cheng, R. (2007) · Polymer · doi:10.1016/j.polymer.2007.03.062 · Cited by 631
Nanocomposites of cellulose acetate butyrate reinforced with cellulose nanocrystals
Grunert, M., & Winter, W. T. (2002) · Journal of Polymers and the Environment · doi:10.1023/a:1021065905986 · Cited by 465
Stable suspensions of partially silylated cellulose whiskers dispersed in organic solvents
Goussé, C., Chanzy, H., Excoffier, G., Soubeyrand, L., & Fleury, E. (2002) · Polymer · doi:10.1016/s0032-3861(02)00051-4 · Cited by 446
Cited by
Items 301–400 of 788
Wang, N., Li, Z., Zhu, G., Yu, Z., Qin, ., Zhou, J., & Lin, N. (2023) · Macromolecules · doi:10.1021/acs.macromol.3c00933 · Cited by 45
Bader, Q. A., Al-Sharify, Z. T., Dhabab, J. M., Zaidan, H. K., Rheima, A. M., Athair, D. M., Joseph, T. M., & Kianfar, E. (2024) · Case Studies in Chemical and Environmental Engineering · doi:10.1016/j.cscee.2024.100993 · Cited by 45
Re, G. L., Engström, J., Wu, Q., Malmström, E., Gedde, U. W., Olsson, R. T., & Berglund, L. A. (2018) · ACS Applied Nano Materials · doi:10.1021/acsanm.8b00376 · Cited by 45
Melt Processing of Cellulose Nanocrystal-Filled Composites: Toward Reinforcement and Foam Nucleation
Zheng, T., & Pilla, S. (2020) · Industrial & Engineering Chemistry Research · doi:10.1021/acs.iecr.0c00170 · Cited by 45
Sabo, R. C., Jin, L., Stark, N. M., & Ibach, R. E. (2013) · BioResources · doi:10.15376/biores.8.3.3322-3335 · Cited by 45
Yang, Q., Pan, X., Huang, F., & Li, K. (2011) · Cellulose · doi:10.1007/s10570-011-9587-y · Cited by 45
Natural Materials for Sustainable Organic Solar Cells: Status and Challenge
Xie, Y., Lu, H., Huang, J., & Xie, H. (2023) · Advanced Functional Materials · doi:10.1002/adfm.202213910 · Cited by 44
Das, R., Lindström, T., Khan, M., Rezaei, M., & Hsiao, B. S. (2023) · BioResources · doi:10.15376/biores.19.1.das · Cited by 45
Photoswitchable nanocomposites made from coumarin-functionalized cellulose nanocrystals
Biyani, M. V., Weder, C., & Foster, E. J. (2014) · Polymer Chemistry · doi:10.1039/c4py00486h · Cited by 44
Wei, B., Li, H., Tian, Y., Xu, X., & Jin, Z. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.01.081 · Cited by 44
Abdullah, N. A., Rani, M. S. A., Mohammad, M., Sainorudin, M. H., Asim, N., Yaakob, Z., Razali, H., & Emdadi, Z. (2021) · Polimery · doi:10.14314/polimery.2021.3.1 · Cited by 43
Tailoring Cellulose Surfaces by Controlled Polymerization Methods
Carlmark, A. (2013) · Macromolecular Chemistry and Physics · doi:10.1002/macp.201300272 · Cited by 42
Surface modification of cellulose nanowhisker throughout graft polymerization of 2-ethyl-2-oxazoline
Tehrani, A. D., & Neysi, E. (2013) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2013.04.082 · Cited by 42
Xiong, S., Wang, Y., Zhu, J., Yu, J., & Hu, Z. (2016) · Polymer · doi:10.1016/j.polymer.2016.01.005 · Cited by 41
Selective Isolation Methods for Cellulose and Chitin Nanocrystals
Yang, T., Qi, H., Liu, P., & Zhang, K. (2020) · ChemPlusChem · doi:10.1002/cplu.202000250 · Cited by 41
Aghvami‐Panah, M., & Ameli, A. (2023) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2023.107879 · Cited by 41
Gogoi, P., Boruah, R., & Dolui, S. K. (2015) · Progress in Organic Coatings · doi:10.1016/j.porgcoat.2014.09.022 · Cited by 41
Zhou, M., Fan, M., Zhao, Y., Jin, T., & Fu, Q. (2015) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2015.12.040 · Cited by 41
Huang, C. (2016) · Polymer Journal · doi:10.1038/pj.2016.24 · Cited by 41
Huang, L., Ye, Z., & Berry, R. (2016) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.6b01253 · Cited by 40
Hong, J. K., Cooke, S. L., Whittington, A. R., & Roman, M. (2021) · Frontiers in Bioengineering and Biotechnology · doi:10.3389/fbioe.2021.605924 · Cited by 39
Terpene and Dextran Renewable Resources for the Synthesis of Amphiphilic Biopolymers
Alves, M.-H., Huda, S., Tranchant, J., Gombart, E., Sagorin, G., Caillol, S., Billon, L., & Save, M. (2013) · Biomacromolecules · doi:10.1021/bm401521f · Cited by 39
Amino acid modified cellulose whiskers
Cateto, C. A., & Ragauskas, A. J. (2011) · RSC Advances · doi:10.1039/c1ra00647a · Cited by 39
Hivechi, A., Bahrami, S. H., Siegel, R. A., Siehr, A., Sahoo, A., Milan, P. B., Joghataei, M. T., Amoupour, M., & Simorgh, S. (2021) · Materials Science and Engineering C · doi:10.1016/j.msec.2020.111855 · Cited by 38
Synthesis of poly(ε-caprolactone)-grafted guar gum by surface-initiated ring-opening polymerization
Assimi, T. E., Blažic, R., Kadib, A. E., Raihane, M., Beniazza, R., Luinstra, G. A., Vidović, E., & Lahcini, M. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.05.049 · Cited by 38
Bedair, T. M. I., Yu, S. J., Im, S. G., Park, B. J., Joung, Y. K., & Han, D. K. (2015) · Journal of Colloid and Interface Science · doi:10.1016/j.jcis.2015.08.051 · Cited by 38
Liu, Y., Jin, X., Zhang, X.-S., Han, M., & Ji, S. (2014) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2014.09.074 · Cited by 38
Rahimi, S. K., & Otaigbe, J. U. (2017) · Polymer · doi:10.1016/j.polymer.2017.08.064 · Cited by 37
Kafle, K., Shi, R., Lee, C. M., Mittal, A., Park, Y., Sun, Y., Park, S., Chiang, V. L., & Kim, S. H. (2014) · Cellulose · doi:10.1007/s10570-014-0322-3 · Cited by 37
Ramires, E. C., de Oliveira, F., & Frollini, E. (2013) · Journal of Applied Polymer Science · doi:10.1002/app.38934 · Cited by 37
Self-assembly of polysaccharide nanocrystals: from aggregation in suspensions to optical materials
Song, Q., Wang, Z., Xu, D., Liu, S., Liu, H., & Zhang, K. (2023) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2023.101768 · Cited by 36
Carlsson, L., Utsel, S., Wågberg, L., Malmström, E., & Carlmark, A. (2011) · Soft Matter · doi:10.1039/c1sm06121f · Cited by 36
Lemahieu, L., Bras, J., Tiquet, P., Augier, S., & Dufresne, A. (2011) · Macromolecular Materials and Engineering · doi:10.1002/mame.201100015 · Cited by 36
Self-citationCourtenay, J. C., Ramalhete, S. M., Skuze, W. J., Soni, R., Khimyak, Y. Z., Edler, K. J., & Scott, J. L. (2017) · Soft Matter · doi:10.1039/c7sm02113e · Cited by 36
Boujemaoui, A., Ansari, F., & Berglund, L. A. (2018) · Biomacromolecules · doi:10.1021/acs.biomac.8b00701 · Cited by 36
Surface Chemistry of Nanocellulose
Zhu, G., & Lin, N. (2019) · Wiley eBooks · doi:10.1002/9783527807437.ch5 · Cited by 36
Morphology and mechanical properties of poly(ethylene brassylate)/cellulose nanocrystal composites
Janices, A. B., Llorente, O., Fernández, J., Meaurio, E., & Sarasua, J.-R. (2019) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2019.05.091 · Cited by 36
Ganguly, S., & Tang, X. S. (2024) · ACS Sustainable Chemistry & Engineering · doi:10.1021/acssuschemeng.4c07940 · Cited by 35
Nanocomposites of LLDPE and Surface-Modified Cellulose Nanocrystals Prepared by Melt Processing
Anžlovar, A., Kunaver, M., Krajnc, A., & Žagar, E. (2018) · Molecules · doi:10.3390/molecules23071782 · Cited by 35
One-Component Nanocomposites Based on Polymer-Grafted Cellulose Nanocrystals
Wohlhauser, S., Kuhnt, T., Meesorn, W., de Espinosa, L. M., Zoppe, J. O., & Weder, C. (2020) · Macromolecules · doi:10.1021/acs.macromol.9b01612 · Cited by 35
Navarro, J. R. G., & Bergström, L. (2014) · RSC Advances · doi:10.1039/c4ra06559j · Cited by 35
Song, X., Yao, W., Lu, G., Li, Y., & Huang, X. (2013) · Polymer Chemistry · doi:10.1039/c3py00046j · Cited by 35
Cellulose nanocrystals modified with quaternary ammonium salts and its reinforcement of polystyrene
Yin, Y., Hong, Z., Tian, X., Zhu, Q., Jiang, X., Wang, H., & Gao, W. (2017) · Polymer Bulletin · doi:10.1007/s00289-017-2131-y · Cited by 35
Tian, C., Fu, S., & Lucia, L. A. (2015) · Cellulose · doi:10.1007/s10570-015-0658-3 · Cited by 35
Kim, H. J., Jeong, J. H., Choi, Y. H., & Eom, Y. (2021) · Korea-Australia Rheology Journal · doi:10.1007/s13367-021-0015-z · Cited by 34
Rigg, A., Champagne, P., & Cunningham, M. F. (2021) · Macromolecular Rapid Communications · doi:10.1002/marc.202100493 · Cited by 34
Vidal, J. L., Yavitt, B. M., Wheeler, M. D., Kolwich, J., Donovan, L. N., Sit, C. S., Hatzikiriakos, S. G., Jalsa, N. K., MacQuarrie, S., & Kerton, F. M. (2021) · Sustainable Chemistry and Pharmacy · doi:10.1016/j.scp.2021.100586 · Cited by 34
Hassanabadi, H. M., & Rodrigue, D. (2011) · Rheologica Acta · doi:10.1007/s00397-011-0603-9 · Cited by 34
Benkaddour, A., Jradi, K., Robert, S., & Daneault, C. (2013) · Nanomaterials · doi:10.3390/nano3040638 · Cited by 34
do Amaral, H. R., Wilson, J. A., do Amaral, R. J. F. C., Paşcu, E. I., de Oliveira, F. C. S., Kearney, C. J., Freitas, J. C. C., & Heise, A. (2020) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.117201 · Cited by 33
Mithra, S. N., & Ahankari, S. S. (2022) · Materials Today Sustainability · doi:10.1016/j.mtsust.2022.100191 · Cited by 33
Cellulose-based functional hydrogels derived from bamboo for product design
Cao, X., Li, F., Zheng, T., Li, G., Wang, W., Li, Y., Chen, S., Li, X., & Lu, Y. (2022) · Frontiers in Plant Science · doi:10.3389/fpls.2022.958066 · Cited by 33
Ansari, F., Lindh, E. L., Furó, I., Johansson, M. K. G., & Berglund, L. A. (2016) · Composites Science and Technology · doi:10.1016/j.compscitech.2016.08.002 · Cited by 33
Germiniani, L. G. L., da Silva, L. C. E., Plivelic, T. S., & Gonçalves, M. D. C. (2018) · Journal of Materials Science · doi:10.1007/s10853-018-2860-9 · Cited by 33
Li, Y., Han, C., Yu, Y., & Xiao, L. (2020) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2020.01.054 · Cited by 33
Jia, N., Li, S.-M., Ma, M., Sun, R., & Zhu, J. (2011) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2011.11.086 · Cited by 33
Sustainability Meets Functionality: Green Design Approaches to Cellulose-Based Materials
Cho, Y.-J., Ninh, P. T. T., Hwang, S. H., Choe, S., & Myung, J. (2025) · ACS Materials Letters · doi:10.1021/acsmaterialslett.4c02591 · Cited by 32
Yu, H., & Yan, C. (2017) · Wiley eBooks · doi:10.1002/9783527689972.ch12 · Cited by 32
Magnani, C., Idström, A., Nordstierna, L., Müller, A. J., Dúbois, P., Raquez, J., & Re, G. L. (2020) · Biomacromolecules · doi:10.1021/acs.biomac.9b01760 · Cited by 32
Banerjee, M., Saraswatula, S., Williams, A., & Brettmann, B. K. (2020) · Processes · doi:10.3390/pr8060698 · Cited by 32
Biocomposites based on polycaprolactone reinforced with alfa fibre mats
Marrakchi, Z., Oueslati, H., Belgacem, M. N., Mhenni, F., & Mauret, É. (2012) · Composites Part A Applied Science and Manufacturing · doi:10.1016/j.compositesa.2011.12.027 · Cited by 32
Lalanne-Tisné, M., Eyley, S., Winter, J. D., Favrelle, A., Thielemans, W., & Zinck, P. (2022) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2022.119840 · Cited by 31
Omorogbe, S. O., Ikhuoria, E. U., Igiehon Lauretta, I., Agbonlahor Osazuwa, G., Ifijen Hilary, I., & Aigbodion, A. I. (2018) · Nigerian Journal of Materials Science and Engineering · doi:10.67656/njmse.2018.usmwmcpw · Cited by 31
Tian, C., Fu, S., Meng, Q., & Lucia, L. A. (2016) · Cellulose · doi:10.1007/s10570-016-0980-4 · Cited by 31
Terzopoulou, Z. N., Baciu, D., Gounari, E., Steriotis, T., Charalambopoulou, G., & Bikiaris, D. Ν. (2018) · Polymers · doi:10.3390/polym10040381 · Cited by 31
Operamolla, A. (2019) · International Journal of Photoenergy · doi:10.1155/2019/3057929 · Cited by 31
Tu, C.-W., Tsai, F., Chang, C., Yang, C., Kuo, S., Zhang, J., Chen, T., & Huang, C. (2019) · Polymers · doi:10.3390/polym11101631 · Cited by 30
Aramfard, M., Kaynan, Ö., Hosseini, E., Zakertabrizi, M., Pérez, L. M., & Asadi, A. A. (2022) · Small · doi:10.1002/smll.202202216 · Cited by 30
Fundamentals of and advances in nanocellulose and nanochitin systems
Jin, S.-A., & Spontak, R. J. (2023) · Advanced Industrial and Engineering Polymer Research · doi:10.1016/j.aiepr.2023.04.003 · Cited by 30
Hindi, S. S. Z., Sabir, J. S. M., Dawoud, U. M., Ismail, I. M. I., Asiry, K. A., Mirdad, Z. M., Abo‐Elyousr, K. A. M., Shiboob, M. H., Gabal, M. A. E.-F., Albureikan, M. O. I., et al. (2023) · Polymers · doi:10.3390/polym15122660 · Cited by 30
Cellulosic Biocomposites: Potential Materials for Future
Bhat, A. H., Dasan, Y. K., Khan, I., & Jawaid, M. (2017) · Green energy and technology · doi:10.1007/978-3-319-49382-4_4 · Cited by 30
Liu, Y., Zhou, L., Wang, L., Pan, X., Wang, K., Shu, J., Liu, L., Zhang, H., Lin, L., Shi, X., et al. (2020) · Composites Science and Technology · doi:10.1016/j.compscitech.2019.107985 · Cited by 30
Nanometer Smooth, Macroscopic Spherical Cellulose Probes for Contact Adhesion Measurements
Carrick, C., Pendergraph, S. A., & Wågberg, L. (2014) · ACS Applied Materials & Interfaces · doi:10.1021/am505673u · Cited by 30
Mondal, K., Bhagabati, P., Goud, V. V., Sakurai, S., & Katiyar, V. (2021) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2021.09.114 · Cited by 29
Nanofluid to nanocomposite film: chitosan and cellulose-based edible packaging
Pinem, M. P., Wardhono, E. Y., Nadaud, F., Clausse, D., Saleh, K., & Guénin, E. (2020) · Nanomaterials · doi:10.3390/nano10040660 · Cited by 29
Engineered Multilayer Microcapsules Based on Polysaccharides Nanomaterials
Lombardo, S., & Villares, A. (2020) · Molecules · doi:10.3390/molecules25194420 · Cited by 29
Shi, Z., Huang, J., Liu, C., Ding, B., Kuga, S., Cai, J., & Zhang, L. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b06232 · Cited by 29
Leite, L. S. F., Battirola, L. C., da Silva, L. C. E., & Gonçalves, M. D. C. (2016) · Journal of Applied Polymer Science · doi:10.1002/app.44201 · Cited by 29
Rebouillat, S., & Pla, F. (2016) · Journal of Biomaterials and Nanobiotechnology · doi:10.4236/jbnb.2016.74017 · Cited by 29
Tetlow, D., Simon, L. D., Liew, S. Y., Hewakandamby, B. N., Mack, D., Thielemans, W., & Riffat, S. (2017) · Energy and Buildings · doi:10.1016/j.enbuild.2017.08.058 · Cited by 28
Photo-Induced Macromolecular Functionalization of Cellulose via Nitroxide Spin Trapping
Delaittre, G., Dietrich, M., Blinco, J. P., Hirschbiel, A. F., Brüns, M., Barner, L., & Barner‐Kowollik, C. (2012) · Biomacromolecules · doi:10.1021/bm3001364 · Cited by 27
Lettow, J. H., Yang, H., Nealey, P. F., & Rowan, S. J. (2021) · Macromolecules · doi:10.1021/acs.macromol.1c01886 · Cited by 27
Hydrophobization of lignocellulosic materials part III: modification with polymers
Rodríguez‐Fabià, S., Torstensen, J. Ø., Johansson, L., & Syverud, K. (2022) · Cellulose · doi:10.1007/s10570-022-04660-0 · Cited by 27
Sun, J., Liang, M., Yin, L., Rivers, G., Hu, G., Pan, Q., & Zhao, B. (2023) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.3c05041 · Cited by 27
Soeta, H., Fujisawa, S., Saito, T., & Isogai, A. (2017) · Composites Science and Technology · doi:10.1016/j.compscitech.2017.05.010 · Cited by 27
Carlsson, L., Ingverud, T., Blomberg, H., Carlmark, A., Larsson, P. T., & Malmström, E. (2015) · Cellulose · doi:10.1007/s10570-014-0510-1 · Cited by 27
In Situ Synthesis of Silver Nanoparticles for Ag‐NP/Cotton Nanocomposite and Its Bactericidal Effect
Parham, S., Nemati, M., Sadir, S., Bagherbaigi, S., Wicaksono, D. H. B., & Nur, H. (2017) · Journal of the Chinese Chemical Society · doi:10.1002/jccs.201700157 · Cited by 27
Palaganas, N. B., Palaganas, J. O., Doroteo, S. H. Z., & Millare, J. C. (2022) · Additive manufacturing · doi:10.1016/j.addma.2022.103295 · Cited by 26
ADVANCED FUNCTIONAL MATERIALS BASED ON CELLULOSE
Zhang, J., & Zhang, J. P. (2010) · Acta Polymerica Sinica · doi:10.3724/sp.j.1105.2010.10238 · Cited by 26
Han, N., Li, Z., Zhang, X., Yu, W., Chen, X., Wang, D., & Li, J. (2016) · Cellulose · doi:10.1007/s10570-016-0901-6 · Cited by 26
Cellulose nanofillers for food packaging
Olsson, R. T., Fogelström, L., Martínez‐Sanz, M., & Henriksson, M. (2011) · Elsevier eBooks · doi:10.1533/9780857092786.1.86 · Cited by 25
Antolín‐Cerón, V. H., González-López, F.-J., Astudillo-Sánchez, P. D., Barrera‐Rivera, K. A., & Martínez‐Richa, A. (2022) · Polymers · doi:10.3390/polym14040831 · Cited by 25
Nanocellulosic Materials in Tissue Engineering Applications
Mohan, T., Hribernik, S., Kargl, R., & Kleinschek, K. S. (2015) · InTech eBooks · doi:10.5772/61344 · Cited by 25
Zhang, X., & Wang, X. (2018) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2018.04.124 · Cited by 25
Cellulose Nanocomposites for High-Performance Applications
Cherian, B. M., Leão, A. L., de Souza, S. F., Thomas, S., Pothan, L. A., & Kottaisamy, M. (2011) · Springer eBooks · doi:10.1007/978-3-642-17370-7_21 · Cited by 25
Bedair, T. M. I., Cho, Y., Kim, T. J., Kim, Y. D., Park, B. J., Joung, Y. K., & Han, D. K. (2014) · Langmuir · doi:10.1021/la501990p · Cited by 25
Tian, C., Fu, S., Chen, J., Meng, Q., & Lucia, L. A. (2014) · Nordic Pulp & Paper Research Journal · doi:10.3183/npprj-2014-29-01-p058-068 · Cited by 25
Pearce, H. A., Kim, Y. S., Díaz-Gómez, L. A., & Mikos, A. G. (2020) · Elsevier eBooks · doi:10.1016/b978-0-12-816137-1.00082-9 · Cited by 24
Cellulose Nanofibers: Synthesis, Unique Properties, and Emerging Applications
Meftahi, A., Heravi, M. E. M., Barhoum, A., Samyn, P., Najarzadeh, H., & Alibakhshi, S. (2022) · Springer eBooks · doi:10.1007/978-3-030-89621-8_13 · Cited by 24
Sun, J., Wen, Z., Khan, M. A., Lv, K., Shen, H., Dai, L., Li, Y., Ding, Y., Liu, C., & Li, M. (2024) · International Journal of Biological Macromolecules · doi:10.1016/j.ijbiomac.2024.136274 · Cited by 24
Metadata
- Authors
- Habibi, Y., Goffin, A.-L., Schiltz, N., Duquesne, E., Dubois, P., & Dufresne, A.
- Affiliations
- Institut polytechnique de Grenoble (FR)
- University of Mons (BE)
- Corresponding author
- Dufresne, Alain
- Venue
- Journal of Materials Chemistry
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2008
- Volume
- 18
- Issue
- 41
- Pages
- 5002
- ISSN
- 0959-9428 (ISSN-L)
- 1364-5501
- OpenAlex
- W2167275266
- Cited by
- 672
- References
- 36
- Citations by year
- 2026: 13 · 2025: 20 · 2024: 22 · 2023: 37 · 2022: 42 · 2021: 47 · 2020: 55 · 2019: 44 · 2018: 49 · 2017: 61 · 2016: 50 · 2015: 52 · 2014: 49 · 2013: 42 · 2012: 24
- FWCI
- 9.28
- Type
- journal article
- Language
- en
- Open access
- closed
- Locations
- Journal of Materials Chemistry (publishedVersion)
- HAL (submittedVersion)
- ORBi UMONS (submittedVersion)
- Topics
- Physical Sciences › Materials Science › Biomaterials › Advanced Cellulose Research Studies
- Physical Sciences › Materials Science › Biomaterials › biodegradable polymer synthesis and properties
- Physical Sciences › Materials Science › Polymers and Plastics › Polymer Nanocomposites and Properties
- Keywords
- polycaprolactone, cellulose nanocrystals, grafting from, ring-opening polymerization, bionanocomposites, hybrid nanostructures, thermomechanical properties, Young's modulus, storage modulus, crystallinity
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.