The DOI matches its Crossref record; 13 of the 13 references it cites were found in a registry or an index.
The role of solvent in mechanochemical and sonochemical cocrystal formation: a solubility-based approach for predicting cocrystallisation outcome
Abstract
Mechanochemical liquid-assisted grinding (LAG) and sonochemical (SonicSlurry) techniques have been compared as methods to construct four model pharmaceutical cocrystals involving theophylline and caffeine as pharmaceutical ingredients and L-malic or L-tartaric acid as pharmaceutical cocrystal formers. For these model systems, the results are interpreted using the parameter η, the ratio of solvent volume to sample weight. Each if the four cocrystals was studied in four different solvents using LAG at η = 0.25 and 10 µL mg−1, as well as SonicSlurry experiments at η = 2, 6 and 12 µL mg−1. The formation of the cocrystal is observed in all standard LAG experiments when η = 0.25 µL mg−1. Cocrystal formation by neat grinding, i.e. with no liquid added, was observed only for the cocrystal of theophylline and L-malic acid. LAG experiments at very low η values (below 0.5 µL mg−1) revealed that the rate of cocrystal formation depended on the choice of the liquid and increases with η. SonicSlurry experiments performed at higher η values of 2, 6 and 12 µL mg−1 provided three different outcomes: the pure cocrystal, a mixture of the cocrystal with a cocrystal component, or a single cocrystal component. LAG experiments at η = 10 µL mg−1 produced results consistent with the SonicSlurry experiments at η = 12 µL mg−1. Measuring approximate solubilities of individual cocrystal components revealed that product formation is not dictated by the specific processing method but by saturation levels of reactants. An experimental approach based on approximate solubilities of cocrystal components has been developed to qualitatively predict the outcome of cocrystallization experiments at different η values. As a general guideline, cocrystal formation is expected under conditions in which all cocrystal components remain saturated.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Supramolecular Synthons in Crystal Engineering—A New Organic Synthesis
Desiraju, G. R. (1995) · Angewandte Chemie International Edition in English · doi:10.1002/anie.199523111 · Cited by 4,856
Vishweshwar, P., McMahon, J. A., Bis, J. A., & Zaworotko, M. J. (2006) · Journal of Pharmaceutical Sciences · doi:10.1002/jps.20578 · Cited by 968
Pharmaceutical Cocrystals: An Emerging Approach to Physical Property Enhancement
Jones, W., Motherwell, W. D. S., & Trask, A. V. (2006) · MRS Bulletin · doi:10.1557/mrs2006.206 · Cited by 393
Self-citationReactions Between or Within Molecular Crystals
Braga, D., & Grepioni, F. (2004) · Angewandte Chemie International Edition · doi:10.1002/anie.200301721 · Cited by 341
Lien Nguyen, K., Friščić, T., Day, G. M., Gladden, L. F., & Jones, W. (2007) · Nature Materials · doi:10.1038/nmat1848 · Cited by 289
Self-citationBraga, D., Giaffreda, S. L., Grepioni, F., Pettersen, A., Maini, L., Curzi, M., & Polito, M. (2006) · Dalton Transactions · doi:10.1039/b516165g · Cited by 289
Efficient Co-crystal Screening Using Solution-Mediated Phase Transformation
Zhang, G. G. Z., Henry, R. F., Borchardt, T. B., & Lou, X. (2007) · Journal of Pharmaceutical Sciences · doi:10.1002/jps.20949 · Cited by 217
How does grinding produce co-crystals? Insights from the case of benzophenone and diphenylamine
Chadwick, K., Davey, R. J., & Cross, W. I. (2007) · CrystEngComm · doi:10.1039/b709411f · Cited by 156
Patil, A. O., Curtin, D. Y., & Paul, I. C. (1984) · Journal of the American Chemical Society · doi:10.1021/ja00314a017 · Cited by 136
Childs, S. L., Chyall, L. J., Dunlap, J. T., Coates, D. A., Stahly, B. C., & Stahly, G. P. (2004) · Crystal Growth & Design · doi:10.1021/cg034243p · Cited by 100
Self-citation
Cited by
Mechanochemistry: opportunities for new and cleaner synthesis
James, S. L., Adams, C. J., Bolm, C., Braga, D., Collier, P., Friščić, T., Grepioni, F., Harris, K. D. M., Hyett, G., Jones, W., et al. (2012) · Chem. Soc. Rev. · doi:10.1039/c1cs15171a · Cited by 3,056
Self-citationMechanochemistry: A Force of Synthesis
Do, J.-L., & Friščić, T. (2017) · ACS Central Science · doi:10.1021/acscentsci.6b00277 · Cited by 1,460
Self-citationMechanochemistry for Synthesis
Friščić, T., Mottillo, C., & Titi, H. M. (2020) · Angewandte Chemie International Edition · doi:10.1002/anie.201906755 · Cited by 1,119
Self-citationZeolitic imidazolate framework materials: recent progress in synthesis and applications
Chen, B., Yang, Z., Zhu, Y., & Xia, Y. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta02984d · Cited by 1,009
Mechanochemistry as an emerging tool for molecular synthesis: what can it offer?
Howard, J. L., Cao, Q., & Browne, D. L. (2018) · Chemical Science · doi:10.1039/c7sc05371a · Cited by 970
Altering Product Selectivity by Mechanochemistry
Hernández, J. G., & Bolm, C. (2017) · The Journal of Organic Chemistry · doi:10.1021/acs.joc.6b02887 · Cited by 716
Sustainability Assessment of Mechanochemistry by Using the Twelve Principles of Green Chemistry
Ardila‐Fierro, K. J., & Hernández, J. G. (2021) · ChemSusChem · doi:10.1002/cssc.202100478 · Cited by 705
Friščić, T. (2012) · Chemical Society Reviews · doi:10.1039/c2cs15332g · Cited by 617
Self-citationReal-time and in situ monitoring of mechanochemical milling reactions
Friščić, T., Halasz, I., Beldon, P. J., Belenguer, A. M., Adams, F., Kimber, S. A. J., Honkimäki, V., & Dinnebier, R. E. (2013) · Nature Chemistry · doi:10.1038/nchem.1505 · Cited by 617
Self-citationRedox reactions of small organic molecules using ball milling and piezoelectric materials
Kubota, K., Pang, Y., Miura, A., & Ito, H. (2019) · Science · doi:10.1126/science.aay8224 · Cited by 603
Crystal Engineering of Pharmaceutical Cocrystals in the Discovery and Development of Improved Drugs
Bolla, G., Sarma, B., & Nangia, A. K. (2022) · Chemical Reviews · doi:10.1021/acs.chemrev.1c00987 · Cited by 597
Metal–organic frameworks meet scalable and sustainable synthesis
Julien, P. A., Mottillo, C., & Friščić, T. (2017) · Green Chemistry · doi:10.1039/c7gc01078h · Cited by 520
Self-citationRapid Room‐Temperature Synthesis of Zeolitic Imidazolate Frameworks by Using Mechanochemistry
Beldon, P. J., Fábián, L., Stein, R. S., Thirumurugan, A., Cheetham, A. K., & Friščić, T. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.201005547 · Cited by 480
Self-citationSolvent-assisted mechanochemistry
Bowmaker, G. A. (2013) · Chem. Commun. · doi:10.1039/c2cc35694e · Cited by 428
Tan, D., Loots, L., & Friščić, T. (2016) · Chemical Communications · doi:10.1039/c6cc02015a · Cited by 411
Self-citationLiquid‐Assisted Grinding Mechanochemistry in the Synthesis of Pharmaceuticals
Ying, P., Yu, J., & Su, W. (2021) · Advanced Synthesis & Catalysis · doi:10.1002/adsc.202001245 · Cited by 368
Mechanochemistry for Organic Chemists: An Update
Tan, D., & Friščić, T. (2018) · European Journal of Organic Chemistry · doi:10.1002/ejoc.201700961 · Cited by 357
Self-citationMechanochemistry: New Tools to Navigate the Uncharted Territory of “Impossible” Reactions
Cuccu, F., De Luca, L., Delogu, F., Colacino, E., Solin, N., Mocci, R., & Porcheddu, A. (2022) · ChemSusChem · doi:10.1002/cssc.202200362 · Cited by 339
The mechanochemical synthesis of polymers
Krusenbaum, A., Grätz, S., Tigineh, G. T., Borchardt, L., & Kim, J. G. (2022) · Chemical Society Reviews · doi:10.1039/d1cs01093j · Cited by 335
Mechanochemical and solvent-free assembly of zirconium-based metal–organic frameworks
Užarević, K., Wang, T. C., Moon, S.-Y., Fidelli, A. M., Hupp, J. T., Farha, O. K., & Friščić, T. (2016) · Chemical Communications · doi:10.1039/c5cc08972g · Cited by 330
Self-citationMechanochemistry for Synthesis
Friščić, T., Mottillo, C., & Titi, H. M. (2020) · Angewandte Chemie · doi:10.1002/ange.201906755 · Cited by 288
Self-citationLanderos, J. M., & Juaristi, E. (2017) · European Journal of Organic Chemistry · doi:10.1002/ejoc.201601276 · Cited by 48
Metadata
- Authors
- Friščić, T., Childs, S. L., Rizvi, S. A. A., & Jones, W.
- Venue
- CrystEngComm
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2009
- Volume
- 11
- Issue
- 3
- Pages
- 418-426
- ISSN
- 1466-8033 (ISSN-L)
- OpenAlex
- W2071964185
- Cited by
- 649
- References
- 13
- FWCI
- 9.75
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.