The DOI matches its Crossref record.
Thin, lightweight, foldable thermochromic displays on paper
Abstract
This article describes an electronic display that is fabricated by patterning electrically conductive wires (heaters) with micron-scale dimensions on one side of a sheet of paper, and thermochromic ink on the opposite side. Passing electrical current through the wires heats the paper and changes the thermochromic ink from colored (black, green, or other colors) to transparent; this change in property reveals the paper underneath the ink-exposing any messages printed on the paper-and serves as the basis for a two-state "shutter" display. This type of display is thin (100 microm), flat, lightweight (the display weighs <20 mg/cm(2)), can be folded, rolled, twisted, and creased while maintaining function, and ultimately can (if required) be disposed of by incineration. The display is appropriate for applications where information must be presented clearly (usually only once) for little cost (each display costs <$0.10/m(2) in materials) and where limited electrical power is available.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cited by
Paper-based microfluidic point-of-care diagnostic devices
Yetisen, A. K., Akram, M. S., & Lowe, C. R. (2013) · Lab on a Chip · doi:10.1039/c3lc50169h · Cited by 1,943
Tobjörk, D., & Österbacka, R. (2011) · Advanced Materials · doi:10.1002/adma.201004692 · Cited by 1,287
A perspective on paper-based microfluidics: Current status and future trends
Li, X., Ballerini, D. R., & Shen, W. (2012) · Biomicrofluidics · doi:10.1063/1.3687398 · Cited by 813
Kim, R.-H., Kim, D.-H., Xiao, J., Kim, B. H., Park, S.-I., Panilaitis, B., Ghaffari, R., Yao, J., Li, M., Liu, Z., et al. (2010) · Nature Materials · doi:10.1038/nmat2879 · Cited by 637
Silk Fibroin for Flexible Electronic Devices
Zhu, B., Wang, H., Leow, W. R., Cai, Y., Loh, X. J., Han, M., & Chen, X. (2016) · Advanced Materials · doi:10.1002/adma.201504276 · Cited by 597
Inkjet printing wearable electronic devices
Gao, M., Li, L., & Song, Y. (2017) · Journal of Materials Chemistry C · doi:10.1039/c7tc00038c · Cited by 535
Green and biodegradable electronics
Irimia-Vladu, M., Głowacki, E. D., Voss, G., Bauer, S., & Sariciftci, N. S. (2012) · Materials Today · doi:10.1016/s1369-7021(12)70139-6 · Cited by 474
Yamada, K., Shibata, H., Suzuki, K., & Citterio, D. (2017) · Lab on a Chip · doi:10.1039/c6lc01577h · Cited by 437
New insights and perspectives into biological materials for flexible electronics
Wang, L., Chen, D., Jiang, K., & Shen, G. (2017) · Chemical Society Reviews · doi:10.1039/c7cs00278e · Cited by 410
Electronic and optoelectronic materials and devices inspired by nature
Meredith, P., Bettinger, C. J., Irimia-Vladu, M., Mostert, A. B., & Schwenn, P. E. (2013) · Reports on Progress in Physics · doi:10.1088/0034-4885/76/3/034501 · Cited by 372
Microfluidics for medical diagnostics and biosensors
Rivet, C., Lee, H., Hirsch, A., Hamilton, S., & Lu, H. (2011) · Chemical Engineering Science · doi:10.1016/j.ces.2010.08.015 · Cited by 356
Cheng, S., & Wu, Z. (2012) · Lab on a Chip · doi:10.1039/c2lc21176a · Cited by 300
CheapStat: An Open-Source, “Do-It-Yourself” Potentiostat for Analytical and Educational Applications
Rowe, A. A., Bonham, A. J., White, R. J., Zimmer, M. P., Yadgar, R. J., Hobza, T. M., Honea, J. W., Ben-Yaacov, I., & Plaxco, K. W. (2011) · PLoS ONE · doi:10.1371/journal.pone.0023783 · Cited by 284
Thermal Response of Transparent Silver Nanowire/PEDOT:PSS Film Heaters
Ji, S., He, W., Wang, K., Ran, Y., & Ye, C. (2014) · Small · doi:10.1002/smll.201401690 · Cited by 265
Crafting technology: Reimagining the processes, materials, and cultures of electronics
Buechley, L., & Perner-Wilson, H. (2012) · ACM Transactions on Computer-Human Interaction · doi:10.1145/2362364.2362369 · Cited by 252
Metadata
- Authors
- Siegel, A. C., Phillips, S. T., Wiley, B. J., & Whitesides, G. M.
- Venue
- Lab on a Chip
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2009
- Volume
- 9
- Issue
- 19
- Pages
- 2775
- ISSN
- 1473-0189 (ISSN-L)
- 1473-0197
- OpenAlex
- W2129648555
- Cited by
- 174
- References
- 0
- FWCI
- 8.71
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.