The DOI matches its Crossref record; 37 of the 37 references it cites were found in a registry or an index.
Mechanical performance tailoring of tough ultra-high porosity foams prepared from cellulose I nanofiber suspensions
Abstract
Low-density structures of mechanical function in plants, arthropods and other organisms, are often based on high-strength cellulose or chitin nanofibers and show an interesting combination of flexibility and toughness. Here, a series of plant-inspired tough and mechanically very robust cellular biopolymer foams with porosities as high as 99.5% (porosity range 93.1–99.5%) were therefore prepared by solvent-free freeze-drying from cellulose I wood nanofiber water suspensions. A wide range of mechanical properties was obtained by controlling density and nanofiber interaction in the foams, and density–property relationships were modeled and compared with those for inorganic aerogels. Inspired by cellulose–xyloglucan (XG) interaction in plant cell walls, XG was added during preparation of the toughest foams. For the cellulose–XG nanocomposite foams in particular, the mechanical properties at comparable densities were superior to those reported in the literature for clay aerogel/cellulose whisker nanocomposites, epoxy/clay aerogels, polymer/clay/nanotube aerogels, and polymer/silica aerogels. The foam structure was characterized by high-resolution field-emission scanning electron microscopy and the specific surface area was measured by nitrogen physisorption. Dynamic mechanical thermal analysis and uniaxial compression tests were performed. The foam was thermally stable up to 275 °C where cellulose started to degrade.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Adsorption of Gases in Multimolecular Layers
Brunauer, S., Emmett, P. H., & Teller, E. (1938) · Journal of the American Chemical Society · doi:10.1021/ja01269a023 · Cited by 28,156
Cellular solids structure and properties
Gibson, L. J., Ashby, M. F., et al. (1997) · Cited by 9,172
Cellulose nanofibers prepared by TEMPO-mediated oxidation of native cellulose
Saito, T., Kimura, S., Nishiyama, Y., & Isogai, A. (2007) · Biomacromolecules · doi:10.1021/bm0703970 · Cited by 2,493
Coherent Expanded Aerogels and Jellies
KISTLER, S. S. (1931) · Nature · doi:10.1038/127741a0 · Cited by 2,103
Pääkkö, M., Ankerfors, M., Kosonen, H., Nykänen, A., Ahola, S., Österberg, M., Ruokolainen, J., Laine, J., Larsson, P. T., Ikkala, O., et al. (2007) · Biomacromolecules · doi:10.1021/bm061215p · Cited by 1,962
Freezing as a Path to Build Complex Composites
Deville, S., Saiz, E., Nalla, R. K., & Tomsia, A. P. (2006) · Science · doi:10.1126/science.1120937 · Cited by 1,900
Cellulose Nanopaper Structures of High Toughness
Henriksson, M., Berglund, L. A., Isaksson, P., Lindström, T., & Nishino, T. (2008) · Biomacromolecules · doi:10.1021/bm800038n · Cited by 1,299
Self-citationMechanical Design in Organisms
Wainwright, S. A., Biggs, W. D., Currey, J. D., & Gosline, J. M. (2020) · Princeton University Press eBooks · doi:10.2307/j.ctv143mdjg · Cited by 1,263
Henriksson, M., Henriksson, G., Berglund, L. A., & Lindström, T. (2007) · European Polymer Journal · doi:10.1016/j.eurpolymj.2007.05.038 · Cited by 1,183
Self-citationKistler, S. S. (1932) · The Journal of Physical Chemistry · doi:10.1021/j150331a003 · Cited by 919
Cited by
Production of cellulose nanofibrils: A review of recent advances
Nechyporchuk, O., Belgacem, M. N., & Bras, J. (2016) · Industrial Crops and Products · doi:10.1016/j.indcrop.2016.02.016 · Cited by 1,687
Chabot, V., Higgins, D., Yu, A., Xiao, X., Chen, Z., & Zhang, J. (2014) · Energy & Environmental Science · doi:10.1039/c3ee43385d · Cited by 1,119
Hydrophobic Nanocellulose Aerogels as Floating, Sustainable, Reusable, and Recyclable Oil Absorbents
Korhonen, J. T., Kettunen, M., Ras, R. H. A., & Ikkala, O. (2011) · ACS Applied Materials & Interfaces · doi:10.1021/am200475b · Cited by 817
Commercial application of cellulose nano-composites – A review
Sharma, A., Thakur, M., Bhattacharya, M., Mandal, T., & Goswami, S. (2019) · Biotechnology Reports · doi:10.1016/j.btre.2019.e00316 · Cited by 762
Biopolymer Aerogels and Foams: Chemistry, Properties, and Applications
Zhao, S., Malfait, W. J., Guerrero‐Alburquerque, N., Koebel, M. M., & Nyström, G. (2018) · Angewandte Chemie International Edition · doi:10.1002/anie.201709014 · Cited by 755
Review of the recent developments in cellulose nanocomposite processing
Oksman, K., Aitomäki, Y., Mathew, A. P., Siqueira, G., Zhou, Q., Butylina, S., Tanpichai, S., Zhou, X., & Hooshmand, S. (2016) · Composites Part A: Applied Science and Manufacturing · doi:10.1016/j.compositesa.2015.10.041 · Cited by 712
Self-citationAdvanced Materials through Assembly of Nanocelluloses
Kontturi, E., Laaksonen, P., Linder, M. B., Nonappa, Gröschel, A. H., Rojas, O. J., & Ikkala, O. (2018) · Advanced Materials · doi:10.1002/adma.201703779 · Cited by 664
Nanocellulose-based foams and aerogels: processing, properties, and applications
Lavoine, N., & Bergström, L. (2017) · Journal of Materials Chemistry A · doi:10.1039/c7ta02807e · Cited by 656
Saito, T., Kuramae, R., Wohlert, J., Berglund, L. A., & Isogai, A. (2013) · Biomacromolecules · doi:10.1021/bm301674e · Cited by 625
Self-citationZhang, Z., Sèbe, G., Rentsch, D., Zimmermann, T., & Tingaut, P. (2014) · Chemistry of Materials · doi:10.1021/cm5004164 · Cited by 613
Nanocellulose properties and applications in colloids and interfaces
Salas, C., Nypelö, T., Rodriguez-Abreu, C., Carrillo, C., & Rojas, O. J. (2014) · Current Opinion in Colloid & Interface Science · doi:10.1016/j.cocis.2014.10.003 · Cited by 612
High-porosity aerogels of high specific surface area prepared from nanofibrillated cellulose (NFC)
Sehaqui, H., Zhou, Q., & Berglund, L. A. (2011) · Composites Science and Technology · doi:10.1016/j.compscitech.2011.07.003 · Cited by 568
Self-citationKobayashi, Y., Saito, T., & Isogai, A. (2014) · Angewandte Chemie International Edition · doi:10.1002/anie.201405123 · Cited by 566
Strong and Tough Cellulose Nanopaper with High Specific Surface Area and Porosity
Sehaqui, H., Zhou, Q., Ikkala, O., & Berglund, L. A. (2011) · Biomacromolecules · doi:10.1021/bm2008907 · Cited by 510
Self-citationRelationship between Length and Degree of Polymerization of TEMPO-Oxidized Cellulose Nanofibrils
Shinoda, R., Saito, T., Okita, Y., & Isogai, A. (2012) · Biomacromolecules · doi:10.1021/bm2017542 · Cited by 497
Kargarzadeh, H., Huang, J., Lin, N., Ahmad, I., Mariano, M., Dufresne, A., Thomas, S., & Gałęski, A. (2018) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2018.07.008 · Cited by 496
Han, J., Zhou, C., Wu, Y., Liu, F., & Wu, Q. (2013) · Biomacromolecules · doi:10.1021/bm4001734 · Cited by 490
Yang, X., & Cranston, E. D. (2014) · Chemistry of Materials · doi:10.1021/cm502873c · Cited by 473
Amine-Based Nanofibrillated Cellulose As Adsorbent for CO2 Capture from Air
Gebald, C., Wurzbacher, J. A., Tingaut, P., Zimmermann, T., & Steinfeld, A. (2011) · Environmental Science & Technology · doi:10.1021/es202223p · Cited by 457
Surface Modification of Bacterial Cellulose Aerogels’ Web-like Skeleton for Oil/Water Separation
Sai, H., Fu, R., Xing, L., Xiang, J., Li, Z., Li, F., & Zhang, T. (2015) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.5b00846 · Cited by 436
Amphiphilic superabsorbent cellulose nanofibril aerogels
Jiang, F., & Hsieh, Y.-L. (2014) · J. Mater. Chem. A · doi:10.1039/c4ta00743c · Cited by 429
Yao, H.-B., Fang, H.-Y., Wang, X.-H., & Yu, S.-H. (2011) · Chemical Society Reviews · doi:10.1039/c0cs00121j · Cited by 394
Cellulose–Silica Nanocomposite Aerogels by In Situ Formation of Silica in Cellulose Gel
Cai, J., Liu, S., Feng, J., Kimura, S., Wada, M., Kuga, S., & Zhang, L. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201105730 · Cited by 394
Zheng, Q., Cai, Z., & Gong, S. (2014) · J. Mater. Chem. A · doi:10.1039/c3ta14642a · Cited by 393
Peng, Y., Gardner, D. J., Han, Y., Kiziltas, A., Cai, Z., & Tshabalala, M. A. (2013) · Cellulose · doi:10.1007/s10570-013-0019-z · Cited by 376
Ultra porous nanocellulose aerogels as separation medium for mixtures of oil/water liquids
Cervin, N. T., Aulin, C., Larsson, P. T., & Wågberg, L. (2012) · Cellulose · doi:10.1007/s10570-011-9629-5 · Cited by 363
Cellulose Nanofiber Orientation in Nanopaper and Nanocomposites by Cold Drawing
Sehaqui, H., Ezekiel Mushi, N., Morimune, S., Salajkova, M., Nishino, T., & Berglund, L. A. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am2016766 · Cited by 351
Self-citationSelf-aligned integration of native cellulose nanofibrils towards producing diverse bulk materials
Saito, T., Uematsu, T., Kimura, S., Enomae, T., & Isogai, A. (2011) · Soft Matter · doi:10.1039/c1sm06050c · Cited by 344
Cellulose Nanocrystal Aerogels as Universal 3D Lightweight Substrates for Supercapacitor Materials
Yang, X., Shi, K., Zhitomirsky, I., & Cranston, E. D. (2015) · Advanced Materials · doi:10.1002/adma.201502284 · Cited by 339
Advances in electromagnetic shielding properties of composite foams
Zhao, B., Hamidinejad, M., Wang, S., Bai, P., Che, R., Zhang, R., & Park, C. B. (2021) · Journal of Materials Chemistry A · doi:10.1039/d1ta00417d · Cited by 333
Inorganic Hollow Nanotube Aerogels by Atomic Layer Deposition onto Native Nanocellulose Templates
Korhonen, J. T., Hiekkataipale, P., Malm, J., Karppinen, M., Ikkala, O., & Ras, R. H. A. (2011) · ACS Nano · doi:10.1021/nn200108s · Cited by 326
Aerogels from nanofibrillated cellulose with tunable oleophobicity
Aulin, C., Netrval, J., Wågberg, L., & Lindström, T. (2010) · Soft Matter · doi:10.1039/c001939a · Cited by 306
Walther, A., Timonen, J. V. I., Díez, I., Laukkanen, A., & Ikkala, O. (2011) · Advanced Materials · doi:10.1002/adma.201100580 · Cited by 279
Xiong, R., Grant, A. M., Ma, R., Zhang, S., & Tsukruk, V. V. (2018) · Materials Science and Engineering: R: Reports · doi:10.1016/j.mser.2018.01.002 · Cited by 276
Jiang, F., & Hsieh, Y.-L. (2014) · J. Mater. Chem. A · doi:10.1039/c3ta13629a · Cited by 268
Nanocellulose-based lightweight porous materials: A review
Sun, Y., Chu, Y., Wu, W., & Xiao, H. (2021) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2020.117489 · Cited by 266
Tingaut, P., Zimmermann, T., & Sèbe, G. (2012) · Journal of Materials Chemistry · doi:10.1039/c2jm32956e · Cited by 266
Overview of Cellulose Nanomaterials, Their Capabilities and Applications
Moon, R. J., Schueneman, G. T., & Simonsen, J. (2016) · JOM · doi:10.1007/s11837-016-2018-7 · Cited by 263
Low density and high strength nanofibrillated cellulose aerogel for thermal insulation application
Gupta, P., Singh, B., Agrawal, A. K., & Maji, P. K. (2018) · Materials & Design · doi:10.1016/j.matdes.2018.08.031 · Cited by 262
Garemark, J., Yang, X., Sheng, X., Cheung, O., Sun, L., Berglund, L. A., & Li, Y. (2020) · ACS Nano · doi:10.1021/acsnano.0c01888 · Cited by 256
Self-citation
Metadata
- Authors
- Sehaqui, H., Salajková, M., Zhou, Q., & Berglund, L. A.
- Venue
- Soft Matter
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2010
- Volume
- 6
- Issue
- 8
- Pages
- 1824
- ISSN
- 1744-683X (ISSN-L)
- 1744-6848
- OpenAlex
- W2064120145
- Cited by
- 462
- References
- 37
- FWCI
- 9.52
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.