The DOI matches its Crossref record; 37 of the 37 references it cites were found in a registry or an index.
Mechanical performance tailoring of tough ultra-high porosity foams prepared from cellulose I nanofiber suspensions
Abstract
Low-density structures of mechanical function in plants, arthropods and other organisms, are often based on high-strength cellulose or chitin nanofibers and show an interesting combination of flexibility and toughness. Here, a series of plant-inspired tough and mechanically very robust cellular biopolymer foams with porosities as high as 99.5% (porosity range 93.1–99.5%) were therefore prepared by solvent-free freeze-drying from cellulose I wood nanofiber water suspensions. A wide range of mechanical properties was obtained by controlling density and nanofiber interaction in the foams, and density–property relationships were modeled and compared with those for inorganic aerogels. Inspired by cellulose–xyloglucan (XG) interaction in plant cell walls, XG was added during preparation of the toughest foams. For the cellulose–XG nanocomposite foams in particular, the mechanical properties at comparable densities were superior to those reported in the literature for clay aerogel/cellulose whisker nanocomposites, epoxy/clay aerogels, polymer/clay/nanotube aerogels, and polymer/silica aerogels. The foam structure was characterized by high-resolution field-emission scanning electron microscopy and the specific surface area was measured by nitrogen physisorption. Dynamic mechanical thermal analysis and uniaxial compression tests were performed. The foam was thermally stable up to 275 °C where cellulose started to degrade.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Adsorption of Gases in Multimolecular Layers
Brunauer, S., Emmett, P. H., & Teller, E. (1938) · Journal of the American Chemical Society · doi:10.1021/ja01269a023 · Cited by 28,156
Cellular solids structure and properties
Gibson, L. J., Ashby, M. F., et al. (1997) · Cited by 9,172
Cellulose nanofibers prepared by TEMPO-mediated oxidation of native cellulose
Saito, T., Kimura, S., Nishiyama, Y., & Isogai, A. (2007) · Biomacromolecules · doi:10.1021/bm0703970 · Cited by 2,493
Coherent Expanded Aerogels and Jellies
KISTLER, S. S. (1931) · Nature · doi:10.1038/127741a0 · Cited by 2,103
Pääkkö, M., Ankerfors, M., Kosonen, H., Nykänen, A., Ahola, S., Österberg, M., Ruokolainen, J., Laine, J., Larsson, P. T., Ikkala, O., et al. (2007) · Biomacromolecules · doi:10.1021/bm061215p · Cited by 1,962
Freezing as a Path to Build Complex Composites
Deville, S., Saiz, E., Nalla, R. K., & Tomsia, A. P. (2006) · Science · doi:10.1126/science.1120937 · Cited by 1,900
Cellulose Nanopaper Structures of High Toughness
Henriksson, M., Berglund, L. A., Isaksson, P., Lindström, T., & Nishino, T. (2008) · Biomacromolecules · doi:10.1021/bm800038n · Cited by 1,299
Self-citationMechanical Design in Organisms
Wainwright, S. A., Biggs, W. D., Currey, J. D., & Gosline, J. M. (2020) · Princeton University Press eBooks · doi:10.2307/j.ctv143mdjg · Cited by 1,263
Henriksson, M., Henriksson, G., Berglund, L. A., & Lindström, T. (2007) · European Polymer Journal · doi:10.1016/j.eurpolymj.2007.05.038 · Cited by 1,183
Self-citationKistler, S. S. (1932) · The Journal of Physical Chemistry · doi:10.1021/j150331a003 · Cited by 919
Experimental determination of the elastic modulus of crystalline regions in oriented polymers
Sakurada, I., Nukushina, Y., & Ito, T. (1962) · Journal of Polymer Science · doi:10.1002/pol.1962.1205716551 · Cited by 883
Sugiyama, J., Vuong, R., & Chanzy, H. (1991) · Macromolecules · doi:10.1021/ma00014a033 · Cited by 791
Pääkkö, M., Vapaavuori, J., Silvennoinen, R., Kosonen, H., Ankerfors, M., Lindström, T., Berglund, L. A., & Ikkala, O. (2008) · Soft Matter · doi:10.1039/b810371b · Cited by 660
Self-citationNakagaito, A. N., & Yano, H. (2004) · Applied Physics A: Materials Science & Processing · doi:10.1007/s00339-003-2453-5 · Cited by 608
Optically transparent composites reinforced with plant fiber-based nanofibers
Iwamoto, S., Nakagaito, A. N., Yano, H., & Nogi, M. (2005) · Applied Physics A · doi:10.1007/s00339-005-3316-z · Cited by 461
Cellulose Aerogels from Aqueous Alkali Hydroxide–Urea Solution
Cai, J., Kimura, S., Wada, M., Kuga, S., & Zhang, L. (2008) · ChemSusChem · doi:10.1002/cssc.200700039 · Cited by 387
Svagan, A. J., Samir, M. A. S. A., & Berglund, L. A. (2008) · Advanced Materials · doi:10.1002/adma.200701215 · Cited by 347
Self-citationOkahisa, Y., Yoshida, A., Miyaguchi, S., & Yano, H. (2009) · Composites Science and Technology · doi:10.1016/j.compscitech.2009.04.017 · Cited by 346
Biomimetic Polysaccharide Nanocomposites of High Cellulose Content and High Toughness
Svagan, A. J., Azizi Samir, M. A. S., & Berglund, L. A. (2007) · Biomacromolecules · doi:10.1021/bm0703160 · Cited by 315
Self-citationTangling Effect in Fibrillated Cellulose Reinforced Nanocomposites
Saïd Azizi Samir, M. A., Alloin, F., Paillet, M., & Dufresne, A. (2004) · Macromolecules · doi:10.1021/ma035939u · Cited by 313
Deformation mechanisms and energy absorption of polystyrene foams for protective helmets
Landro, L. D., Sala, G., & Olivieri, D. (2002) · Polymer Testing · doi:10.1016/s0142-9418(01)00073-3 · Cited by 289
Whitney, S. E. C., Gothard, M. G. E., Mitchell, J. T., & Gidley, M. J. (1999) · Plant Physiology · doi:10.1104/pp.121.2.657 · Cited by 216
Preparation and characterization of jute- and flax-reinforced starch-based composite foams
Soykeabkaew, N., Supaphol, P., & Rujiravanit, R. (2004) · Carbohydrate Polymers · doi:10.1016/j.carbpol.2004.06.037 · Cited by 211
Flexible Nanofiber-Reinforced Aerogel (Xerogel) Synthesis, Manufacture, and Characterization
Li, L., Yalcin, B., Nguyen, B. N., Meador, M. A. B., & Cakmak, M. (2009) · ACS Applied Materials & Interfaces · doi:10.1021/am900451x · Cited by 172
Clay aerogel/cellulose whisker nanocomposites: a nanoscale wattle and daub
Gawryla, M. D., van den Berg, O., Weder, C., & Schiraldi, D. A. (2009) · Journal of Materials Chemistry · doi:10.1039/b823218k · Cited by 155
Malainine, M. E., Mahrouz, M., & Dufresne, A. (2005) · Composites Science and Technology · doi:10.1016/j.compscitech.2005.01.003 · Cited by 149
Activation of Crystalline Cellulose Surfaces through the Chemoenzymatic Modification of Xyloglucan
Brumer, H., Zhou, Q., Baumann, M. J., et al. (2004) · Journal of the American Chemical Society · doi:10.1021/ja0316770 · Cited by 127
Self-citationXyloglucan in cellulose modification
Zhou, Q., Rutland, M. W., Teeri, T. T., & Brumer, H. (2007) · Cellulose · doi:10.1007/s10570-007-9109-0 · Cited by 122
Self-citationBootten, T. J. (2004) · Journal of Experimental Botany · doi:10.1093/jxb/erh065 · Cited by 120
Boday, D. J., Stover, R. J., Muriithi, B., Keller, M. W., Wertz, J. T., Obrey, K. A. D., & Loy, D. A. (2009) · ACS Applied Materials & Interfaces · doi:10.1021/am900240h · Cited by 104
Liebner, F. W., Haimer, E., Potthast, A., Loidl, D., Tschegg, S., Neouze, M., Wendland, M., & Rosenau, T. (2008) · Holzforschung · doi:10.1515/hf.2009.002 · Cited by 95
Elastic, low density epoxy/clay aerogel composites
Arndt, E. M., Gawryla, M. D., & Schiraldi, D. A. (2007) · Journal of Materials Chemistry · doi:10.1039/b704114d · Cited by 94
Zhou, Q., Malm, E., Nilsson, H., Larsson, P. T., Iversen, T., Berglund, L. A., & Bulone, V. (2009) · Soft Matter · doi:10.1039/b907838j · Cited by 92
Self-citationMonolithic cryogels with open porous structure and unique double-continuous macroporous networks
Plieva, F. M., Ekström, P., Galaev, I. Y., & Mattìasson, B. (2008) · Soft Matter · doi:10.1039/b804105a · Cited by 70
Mineralization of Clay/Polymer Aerogels: A Bioinspired Approach to Composite Reinforcement
Johnson, J. R., Spikowski, J., & Schiraldi, D. A. (2009) · ACS Applied Materials & Interfaces · doi:10.1021/am9001919 · Cited by 56
Bootten, T. J., Harris, P. J., Melton, L. D., & Newman, R. H. (2009) · Biomacromolecules · doi:10.1021/bm900762m · Cited by 30
Aerogels—Airy Materials: Chemistry, Structure, and Properties
(1998) · doi:10.1002/(sici)1521-3773(19980202)37:1/2<22::aid-anie22>3.0.co;2-i
Cited by
Chabot, V., Higgins, D., Yu, A., Xiao, X., Chen, Z., & Zhang, J. (2014) · Energy & Environmental Science · doi:10.1039/c3ee43385d · Cited by 1,119
Commercial application of cellulose nano-composites – A review
Sharma, A., Thakur, M., Bhattacharya, M., Mandal, T., & Goswami, S. (2019) · Biotechnology Reports · doi:10.1016/j.btre.2019.e00316 · Cited by 762
Han, J., Zhou, C., Wu, Y., Liu, F., & Wu, Q. (2013) · Biomacromolecules · doi:10.1021/bm4001734 · Cited by 490
Yang, X., & Cranston, E. D. (2014) · Chemistry of Materials · doi:10.1021/cm502873c · Cited by 473
Cellulose Nanofiber Orientation in Nanopaper and Nanocomposites by Cold Drawing
Sehaqui, H., Ezekiel Mushi, N., Morimune, S., Salajkova, M., Nishino, T., & Berglund, L. A. (2012) · ACS Applied Materials & Interfaces · doi:10.1021/am2016766 · Cited by 351
Self-citation
Metadata
- Authors
- Sehaqui, H., Salajková, M., Zhou, Q., & Berglund, L. A.
- Venue
- Soft Matter
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2010
- Volume
- 6
- Issue
- 8
- Pages
- 1824
- ISSN
- 1744-683X (ISSN-L)
- 1744-6848
- OpenAlex
- W2064120145
- Cited by
- 462
- References
- 37
- FWCI
- 9.52
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.