The DOI matches its Crossref record; 40 of the 40 references it cites were found in a registry or an index.
Enhancement of long stability of sulfur cathode by encapsulating sulfur into micropores of carbon spheres
Abstract
To enhance the long stability of sulfur cathode for a high energy lithium–sulfur battery system, a sulfur–carbon sphere composite was prepared by encapsulating sulfur into micropores of carbon spheres by thermal treatment of a mixture of sublimed sulfur and carbon spheres. The elemental sulfur exists as a highly dispersed state inside the micropores of carbon spheres with a large surface area and a narrow pore distribution, based on the analyses of the X-ray powder diffraction (XRD), transmission electron microscopy (TEM), Brunauer–Emmett–Teller (BET), thermogravimetry (TG) and local element line-scanning. It is demonstrated from galvanostatic discharge–charge process, cyclic voltammetry (CV) and electrochemical impedance spectra (EIS) that the sulfur–carbon sphere composite has a large reversible capacity and an excellent high rate discharge capability as cathode materials. In particular, the sulfur–carbon sphere composite with 42 wt% sulfur presents a long electrochemical stability up to 500 cycles, based on the constrained electrochemical reaction inside the narrow micropores of carbon spheres due to strong adsorption. Therefore, the electrochemical reaction constrained inside the micropores proposed here would be the dominant factor for the enhanced long stability of the sulfur cathode. The knowledge acquired in this study is important not only for the design of efficient new electrode materials, but also for understanding the effect of the micropores on the electrochemical cycle stability.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries
Ji, X., Lee, K. T., & Nazar, L. F. (2009) · Nature Materials · doi:10.1038/nmat2460 · Cited by 5,988
Nanomaterials for Rechargeable Lithium Batteries
Bruce, P. G., Scrosati, B., & Tarascon, J. (2008) · Angewandte Chemie International Edition · doi:10.1002/anie.200702505 · Cited by 5,886
Anomalous Increase in Carbon Capacitance at Pore Sizes Less Than 1 Nanometer
Chmiola, J., Yushin, G., Gogotsi, Y., Portet, C., Simon, P., & Taberna, P. L. (2006) · Science · doi:10.1126/science.1132195 · Cited by 4,022
Recommendations for the characterization of porous solids (Technical Report)
Rouquerol, J., Avnir, D., Fairbridge, C. W., Everett, D. H., Haynes, J. M., Pernicone, N., Ramsay, J. D. F., Sing, K. S. W., & Unger, K. K. (1994) · Pure and Applied Chemistry · doi:10.1351/pac199466081739 · Cited by 3,984
Polysulfide Shuttle Study in the Li/S Battery System
Mikhaylik, Y. V., & Akridge, J. R. (2004) · Journal of The Electrochemical Society · doi:10.1149/1.1806394 · Cited by 2,115
Electrochemically Active Polymers for Rechargeable Batteries
Novák, P., Müller, K., Santhanam, K. S. V., & Haas, O. (1997) · Chemical Reviews · doi:10.1021/cr941181o · Cited by 1,618
On the Surface Chemical Aspects of Very High Energy Density, Rechargeable Li–Sulfur Batteries
Aurbach, D., Pollak, E., Elazari, R., Salitra, G., Kelley, C. S., & Affinito, J. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3148721 · Cited by 1,443
Green energy storage materials: Nanostructured TiO2 and Sn-based anodes for lithium-ion batteries
Deng, D., Kim, M. G., Lee, J. Y., & Cho, J. (2009) · Energy & Environmental Science · doi:10.1039/b823474d · Cited by 891
Hierarchically Structured Sulfur/Carbon Nanocomposite Material for High-Energy Lithium Battery
Liang, C., Dudney, N. J., & Howe, J. Y. (2009) · Chemistry of Materials · doi:10.1021/cm902050j · Cited by 862
A Novel Conductive Polymer-Sulfur Composite Cathode Material for Rechargeable Lithium Batteries
Wang, J., Yang, J., Xie, J., & Xu, N. (2002) · Advanced Materials · doi:10.1002/1521-4095(20020704)14:13/14<963::aid-adma963>3.0.co;2-s · Cited by 818
New Nanostructured Li2S/Silicon Rechargeable Battery with High Specific Energy
Yang, Y., McDowell, M. T., Jackson, A., Cha, J. J., Hong, S. S., & Cui, Y. (2010) · Nano Letters · doi:10.1021/nl100504q · Cited by 653
Nanostructured electrode materials for electrochemical energy storage and conversion
Manthiram, A., Vadivel Murugan, A., Sarkar, A., & Muraliganth, T. (2008) · Energy & Environmental Science · doi:10.1039/b811802g · Cited by 638
Multi-electron reaction materials for high energy density batteries
Gao, X.-P., & Yang, H.-X. (2010) · Energy Environ. Sci. · doi:10.1039/b916098a · Cited by 624
Self-citationA Lithium/Dissolved Sulfur Battery with an Organic Electrolyte
Rauh, R. D., Abraham, K. M., Pearson, G. F., Surprenant, J. K., & Brummer, S. B. (1979) · Journal of The Electrochemical Society · doi:10.1149/1.2129079 · Cited by 592
The Lithium/Sulfur Rechargeable Cell
Shim, J., Striebel, K. A., & Cairns, E. J. (2002) · Journal of The Electrochemical Society · doi:10.1149/1.1503076 · Cited by 478
Electrochemical performance of lithium/sulfur cells with three different polymer electrolytes
Marmorstein, D., Yu, T. H., Striebel, K. A., McLarnon, F. R., Hou, J., & Cairns, E. J. (2000) · Journal of Power Sources · doi:10.1016/s0378-7753(00)00432-8 · Cited by 451
A High‐Performance Polymer Tin Sulfur Lithium Ion Battery
Hassoun, J., & Scrosati, B. (2010) · Angewandte Chemie International Edition · doi:10.1002/anie.200907324 · Cited by 433
New insight into the discharge process of sulfur cathode by electrochemical impedance spectroscopy
Yuan, L., Qiu, X., Chen, L., & Zhu, W. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.10.033 · Cited by 380
A Mathematical Model for a Lithium–Sulfur Cell
Kumaresan, K., Mikhaylik, Y., & White, R. E. (2008) · Journal of The Electrochemical Society · doi:10.1149/1.2937304 · Cited by 375
Wang, J., Chew, S. Y., Zhao, Z. W., Ashraf, S., Wexler, D., Chen, J., Ng, S. H., Chou, S. L., & Liu, H. K. (2008) · Carbon · doi:10.1016/j.carbon.2007.11.007 · Cited by 371
Electrochemistry of a nonaqueous lithium/sulfur cell
Yamin, H., & Peled, E. (1983) · Journal of Power Sources · doi:10.1016/0378-7753(83)87029-3 · Cited by 360
Improved dischargeability and reversibility of sulfur cathode in a novel ionic liquid electrolyte
Yuan, L. X., Feng, J. K., Ai, X. P., Cao, Y. L., Chen, S. L., & Yang, H. X. (2006) · Electrochemistry Communications · doi:10.1016/j.elecom.2006.02.007 · Cited by 336
Sulfur–carbon nano-composite as cathode for rechargeable lithium battery based on gel electrolyte
Wang, J. L., Yang, J., Xie, J. Y., Xu, N. X., & Li, Y. (2002) · Electrochemistry Communications · doi:10.1016/s1388-2481(02)00358-2 · Cited by 315
A Solid Sulfur Cathode for Aqueous Batteries
Peramunage, D., & Licht, S. L. (1993) · Science · doi:10.1126/science.261.5124.1029 · Cited by 285
Synthesis and Electrochemical Performance of Sulfur/Highly Porous Carbon Composites
Lai, C., Gao, X. P., Zhang, B., Yan, T. Y., & Zhou, Z. (2009) · The Journal of Physical Chemistry C · doi:10.1021/jp809473e · Cited by 265
Self-citationAnia, C. O., & Bandosz, T. J. (2005) · Langmuir · doi:10.1021/la050772e · Cited by 227
Sun, M., Zhang, S., Jiang, T., Zhang, L., & Yu, J. (2008) · Electrochemistry Communications · doi:10.1016/j.elecom.2008.09.012 · Cited by 224
Choi, Y., Chung, Y.-D., Baek, C.-Y., et al. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.02.053 · Cited by 215
Zheng, W., Liu, Y. W., Hu, X. G., & Zhang, C. F. (2006) · Electrochimica Acta · doi:10.1016/j.electacta.2005.06.021 · Cited by 205
Preparation and electrochemical properties of sulfur–acetylene black composites as cathode materials
Zhang, B., Lai, C., Zhou, Z. P., et al. (2009) · Electrochimica Acta · doi:10.1016/j.electacta.2009.01.056 · Cited by 200
Self-citationApplication of gelatin as a binder for the sulfur cathode in lithium–sulfur batteries
Sun, J., Huang, Y., Wang, W., Yu, Z., Wang, A., & Yuan, K. (2008) · Electrochimica Acta · doi:10.1016/j.electacta.2008.05.022 · Cited by 188
Feng, W., Kwon, S., Borguet, E., & Vidic, R. (2005) · Environmental Science & Technology · doi:10.1021/es0507158 · Cited by 187
New approaches to improve cycle life characteristics of lithium–sulfur cells
JUNG, Y., & KIM, S. (2007) · Electrochemistry Communications · doi:10.1016/j.elecom.2006.09.013 · Cited by 165
Investigation of discharge reaction mechanism of lithium|liquid electrolyte|sulfur battery
Ryu, H.-S., Guo, Z., Ahn, H. J., Cho, G.-B., & Liu, H. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.12.073 · Cited by 143
Polymer lithium cells with sulfur composites as cathode materials
Wang, J., Liu, L., Ling, Z., et al. (2003) · Electrochimica Acta · doi:10.1016/s0013-4686(03)00258-5 · Cited by 136
Superactivated carbide-derived carbons with high hydrogenstorage capacity
Sevilla, M., Foulston, R., & Mokaya, R. (2009) · Energy & Environmental Science · doi:10.1039/b916197j · Cited by 112
Fabrication of wellordered macroporous active carbon with a microporous framework
Lei, Z., Zhang, Y., Wang, H., Ke, Y., Li, J., Li, F., & Xing, J. (2001) · Journal of Materials Chemistry · doi:10.1039/b103722f · Cited by 70
Preparation of polystyrene-based activated carbon spheres and their adsorption of dibenzothiophene
Wang, Q. L., Liang, X., Zhang, R., Liu, C.-J., Liu, X., Qiao, W., Zhan, L., & Ling, L. (2009) · New Carbon Materials · doi:10.1016/s1872-5805(08)60036-0 · Cited by 59
Preparation of activated carbons previously treated with sulfuric acid
Cuerda‐Correa, E. M., Dı́az-Dı́ez, M. A., Macı́as-Garcı́a, A., et al. (2005) · Applied Surface Science · doi:10.1016/j.apsusc.2005.11.013 · Cited by 26
A high energy density lithium/sulfur–oxygen hybrid battery
Zhang, S. S., Foster, D., & Read, J. A. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.12.068 · Cited by 26
Cited by
Rechargeable Lithium–Sulfur Batteries
Manthiram, A., Fu, Y., Chung, S.-H., Zu, C., & Su, Y.-S. (2014) · Chemical Reviews · doi:10.1021/cr500062v · Cited by 4,665
Lithium–Sulfur Batteries: Electrochemistry, Materials, and Prospects
Yin, Y., Xin, S., Guo, Y., & Wan, L. (2013) · Angewandte Chemie International Edition · doi:10.1002/anie.201304762 · Cited by 2,707
Challenges Facing Lithium Batteries and Electrical Double‐Layer Capacitors
Choi, N., Chen, Z., Freunberger, S. A., Ji, X., Sun, Y., Amine, K., Yushin, G., Nazar, L. F., Cho, J., & Bruce, P. G. (2012) · Angewandte Chemie International Edition · doi:10.1002/anie.201201429 · Cited by 2,700
Lithium-ion batteries. A look into the future
Scrosati, B., Hassoun, J., & Sun, Y.-K. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01388b · Cited by 2,595
Designing high-energy lithium–sulfur batteries
Seh, Z. W., Sun, Y., Zhang, Q., & Cui, Y. (2016) · Chemical Society Reviews · doi:10.1039/c5cs00410a · Cited by 2,573
Metadata
- Authors
- Zhang, B., Qin, X., Li, G. R., & Gao, X. P.
- Venue
- Energy & Environmental Science
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2010
- Volume
- 3
- Issue
- 10
- Pages
- 1531
- ISSN
- 1754-5692 (ISSN-L)
- 1754-5706
- OpenAlex
- W2078893562
- Cited by
- 1,280
- References
- 40
- FWCI
- 46.10
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.