The DOI matches its Crossref record; 69 of the 69 references it cites were found in a registry or an index.
Hypercrosslinked organic polymer networks as potential adsorbents for pre-combustion CO2 capture
Open accessAbstract
Hypercrosslinked polymers (HCPs) synthesized by copolymerisation of p-dichloroxylene (p-DCX) and 4,4′-bis(chloromethyl)-1,1′-biphenyl (BCMBP) constitute a family of low density porous materials with excellent textural development. Such polymers show microporosity and mesoporosity and exhibit Brunauer–Emmett–Teller (BET) surface areas of up to 1970 m2 g−1. The CO2 adsorption capacity of these polymers was evaluated using a thermogravimetric analyser (atmospheric pressure tests) and a high-pressure magnetic suspension balance (high pressure tests). CO2 capture capacities were related to the textural properties of the HCPs. The performance of these materials to adsorb CO2 at atmospheric pressure was characterized by maximum CO2 uptakes of 1.7 mmol g−1 (7.4 wt%) at 298 K. At higher pressures (30 bar), the polymers show CO2 uptakes of up to 13.4 mmol g−1 (59 wt%), superior to zeolite-based materials (zeolite 13X, zeolite NaX) and commercial activated carbons (BPL, Norit R). In addition, these polymers showed low isosteric heats of CO2 adsorption and good selectivity towards CO2. Hypercrosslinked polymers have potential to be applied as CO2 adsorbents in pre-combustion capture processes where high CO2 partial pressures are involved.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
On a theory of the van der waals adsorption of gases
Brunauer, S., Deming, L. S., Deming, W. E., & Teller, E. (1940) · Journal of the American Chemical Society · doi:10.1021/ja01864a025 · Cited by 4,829
Millward, A. R., & Yaghi, O. M. (2005) · Journal of the American Chemical Society · doi:10.1021/ja0570032 · Cited by 2,876
Synthesis, Structure, and Carbon Dioxide Capture Properties of Zeolitic Imidazolate Frameworks
Phan, A., Doonan, C. J., Uribe-Romo, F. J., Knobler, C. B., O’Keeffe, M., & Yaghi, O. M. (2010) · Accounts of Chemical Research · doi:10.1021/ar900116g · Cited by 2,618
Furukawa, H., & Yaghi, O. M. (2009) · Journal of the American Chemical Society · doi:10.1021/ja9015765 · Cited by 2,608
Adsorbent Materials for Carbon Dioxide Capture from Large Anthropogenic Point Sources
Choi, S., Drese, J. H., & Jones, C. W. (2009) · ChemSusChem · doi:10.1002/cssc.200900036 · Cited by 2,596
Advances in CO2 capture technology—The U.S. Department of Energy's Carbon Sequestration Program
Figueroa, J. D., Fout, T., Plasynski, S., McIlvried, H., & Srivastava, R. D. (2008) · International Journal of Greenhouse Gas Control · doi:10.1016/s1750-5836(07)00094-1 · Cited by 2,281
Song, C. (2006) · Catalysis Today · doi:10.1016/j.cattod.2006.02.029 · Cited by 1,809
McKeown, N. B., & Budd, P. M. (2006) · Chemical Society Reviews · doi:10.1039/b600349d · Cited by 1,747
Conjugated Microporous Poly(aryleneethynylene) Networks
Jiang, J., Su, F., Trewin, A., Wood, C. D., Campbell, N. L., Niu, H., Dickinson, C., Ganin, A. Y., Rosseinsky, M. J., Khimyak, Y. Z., et al. (2007) · Angewandte Chemie International Edition · doi:10.1002/anie.200701595 · Cited by 1,465
Self-citationBritt, D., Furukawa, H., Wang, B., Glover, T. G., & Yaghi, O. M. (2009) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0909718106 · Cited by 1,211
Cited by
Carbon Dioxide Capture in Metal–Organic Frameworks
Sumida, K., Rogow, D. L., Mason, J. A., McDonald, T. M., Bloch, E. D., Herm, Z. R., Bae, T.-H., & Long, J. R. (2012) · Chemical Reviews · doi:10.1021/cr2003272 · Cited by 6,408
Design and Preparation of Porous Polymers
Wu, D., Xu, F., Sun, B., Fu, R., He, H., & Matyjaszewski, K. (2012) · Chemical Reviews · doi:10.1021/cr200440z · Cited by 1,748
Hypercrosslinked porous polymer materials: design, synthesis, and applications
Tan, L., & Tan, B. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00851h · Cited by 1,357
Porous Organic Materials: Strategic Design and Structure–Function Correlation
Das, S., Heasman, P., Ben, T., & Qiu, S. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00439 · Cited by 1,286
Recent advances in solid sorbents for CO2capture and new development trends
Wang, J., Huang, L., Yang, R., Zhang, Z., Wu, J., Gao, Y., Wang, Q., O'Hare, D., & Zhong, Z. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01647e · Cited by 1,168
Covalent Organic Frameworks for CO2 Capture
Zeng, Y., Zou, R., & Zhao, Y. (2016) · Advanced Materials · doi:10.1002/adma.201505004 · Cited by 1,140
Nanoporous organic polymer networks
Dawson, R., Cooper, A. I., & Adams, D. J. (2012) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2011.09.002 · Cited by 1,114
Self-citationEmerging trends in porous materials for CO2capture and conversion
Singh, G., Lee, J., Karakoti, A., Bahadur, R., Yi, J., Zhao, D., AlBahily, K., & Vinu, A. (2020) · Chemical Society Reviews · doi:10.1039/d0cs00075b · Cited by 843
Review of recent advances in carbon dioxide separation and capture
Kenarsari, S. D., Yang, D., Jiang, G., Zhang, S., Wang, J., Russell, A. G., Wei, Q., & Fan, M. (2013) · RSC Advances · doi:10.1039/c3ra43965h · Cited by 784
Microporous Polycarbazole with High Specific Surface Area for Gas Storage and Separation
Chen, Q., Luo, M., Hammershøj, P., Zhou, D., Han, Y., Laursen, B. W., Yan, C.-G., & Han, B.-H. (2012) · Journal of the American Chemical Society · doi:10.1021/ja300438w · Cited by 704
Microporous organic polymers for carbon dioxide capture
Dawson, R., Stöckel, E., Holst, J. R., Adams, D. J., & Cooper, A. I. (2011) · Energy & Environmental Science · doi:10.1039/c1ee01971f · Cited by 590
Self-citationLuo, Y., Li, B., Wang, W., Wu, K., & Tan, B. (2012) · Advanced Materials · doi:10.1002/adma.201202447 · Cited by 487
Zeolites as Selective Adsorbents for CO2 Separation
Boer, D. G., Langerak, J., & Pescarmona, P. P. (2023) · ACS Applied Energy Materials · doi:10.1021/acsaem.2c03605 · Cited by 481
Rigid and microporous polymers for gas separation membranes
Kim, S., & Lee, Y. M. (2015) · Progress in Polymer Science · doi:10.1016/j.progpolymsci.2014.10.005 · Cited by 462
Outlook of carbon capture technology and challenges
Wilberforce, T., Baroutaji, A., Soudan, B., Al-Alami, A. H., & Olabi, A. G. (2019) · Science of The Total Environment · doi:10.1016/j.scitotenv.2018.11.424 · Cited by 462
Review of pre-combustion capture and ionic liquid in carbon capture and storage
Theo, W. L., Lim, J. S., Hashim, H., Mustaffa, A. A., & Ho, W. S. (2016) · Applied Energy · doi:10.1016/j.apenergy.2016.09.103 · Cited by 396
Recent Development of Hypercrosslinked Microporous Organic Polymers
Xu, S., Luo, Y., & Tan, B. (2013) · Macromolecular Rapid Communications · doi:10.1002/marc.201200788 · Cited by 396
Charged Covalent Triazine Frameworks for CO2 Capture and Conversion
Buyukcakir, O., Je, S. H., Talapaneni, S. N., Kim, D., & Coskun, A. (2017) · ACS Applied Materials & Interfaces · doi:10.1021/acsami.6b16769 · Cited by 356
Porous covalent–organic materials: synthesis, clean energy application and design
Xiang, Z., & Cao, D. (2013) · J. Mater. Chem. A · doi:10.1039/c2ta00063f · Cited by 351
Hypercrosslinked Polymers: A Review
Huang, J., & Turner, S. R. (2018) · Polymer Reviews · doi:10.1080/15583724.2017.1344703 · Cited by 313
Carbon dioxide capture in amorphous porous organic polymers
Wang, W., Zhou, M., & Yuan, D. (2017) · Journal of Materials Chemistry A · doi:10.1039/c6ta09234a · Cited by 307
Arab, P., Rabbani, M. G., Sekizkardes, A. K., İslamoğlu, T., & El-Kaderi, H. M. (2014) · Chemistry of Materials · doi:10.1021/cm403161e · Cited by 300
Chemical functionalization strategies for carbon dioxide capture in microporous organic polymers
Dawson, R., Cooper, A. I., & Adams, D. J. (2013) · Polymer International · doi:10.1002/pi.4407 · Cited by 284
Self-citationModak, A., Nandi, M., Mondal, J., & Bhaumik, A. (2012) · Chem. Commun. · doi:10.1039/c1cc14275e · Cited by 279
Microporous Functionalized Triazine-Based Polyimides with High CO2 Capture Capacity
Liebl, M. R., & Senker, J. (2013) · Chemistry of Materials · doi:10.1021/cm4000894 · Cited by 269
A Critical Review of CO2 Capture Technologies and Prospects for Clean Power Generation
Sifat, N. S., & Haseli, Y. (2019) · Energies · doi:10.3390/en12214143 · Cited by 226
Household mixed plastic waste derived adsorbents for CO2 capture: A feasibility study
Dan, E., McCue, A. J., Dionisi, D., & Fernández Martín, C. (2024) · Journal of Environmental Management · doi:10.1016/j.jenvman.2024.120466 · Cited by 33
Metadata
- Authors
- Martín, C. F., Stöckel, E., Clowes, R., Adams, D. J., Cooper, A. I., Pis, J. J., Rubiera, F., & Pevida, C.
- Venue
- Journal of Materials Chemistry
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2011
- Volume
- 21
- Issue
- 14
- Pages
- 5475
- ISSN
- 0959-9428 (ISSN-L)
- 1364-5501
- OpenAlex
- W1964209358
- Cited by
- 334
- References
- 69
- FWCI
- 49.52
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.