The DOI matches its Crossref record; 69 of the 69 references it cites were found in a registry or an index.
Hypercrosslinked organic polymer networks as potential adsorbents for pre-combustion CO2 capture
Open accessAbstract
Hypercrosslinked polymers (HCPs) synthesized by copolymerisation of p-dichloroxylene (p-DCX) and 4,4′-bis(chloromethyl)-1,1′-biphenyl (BCMBP) constitute a family of low density porous materials with excellent textural development. Such polymers show microporosity and mesoporosity and exhibit Brunauer–Emmett–Teller (BET) surface areas of up to 1970 m2 g−1. The CO2 adsorption capacity of these polymers was evaluated using a thermogravimetric analyser (atmospheric pressure tests) and a high-pressure magnetic suspension balance (high pressure tests). CO2 capture capacities were related to the textural properties of the HCPs. The performance of these materials to adsorb CO2 at atmospheric pressure was characterized by maximum CO2 uptakes of 1.7 mmol g−1 (7.4 wt%) at 298 K. At higher pressures (30 bar), the polymers show CO2 uptakes of up to 13.4 mmol g−1 (59 wt%), superior to zeolite-based materials (zeolite 13X, zeolite NaX) and commercial activated carbons (BPL, Norit R). In addition, these polymers showed low isosteric heats of CO2 adsorption and good selectivity towards CO2. Hypercrosslinked polymers have potential to be applied as CO2 adsorbents in pre-combustion capture processes where high CO2 partial pressures are involved.
Overview
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Run the check — free, no account needed. It reads the open-access text and checks the sources it cites.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
On a theory of the van der waals adsorption of gases
Brunauer, S., Deming, L. S., Deming, W. E., & Teller, E. (1940) · Journal of the American Chemical Society · doi:10.1021/ja01864a025 · Cited by 4,829
Millward, A. R., & Yaghi, O. M. (2005) · Journal of the American Chemical Society · doi:10.1021/ja0570032 · Cited by 2,876
Synthesis, Structure, and Carbon Dioxide Capture Properties of Zeolitic Imidazolate Frameworks
Phan, A., Doonan, C. J., Uribe-Romo, F. J., Knobler, C. B., O’Keeffe, M., & Yaghi, O. M. (2010) · Accounts of Chemical Research · doi:10.1021/ar900116g · Cited by 2,618
Furukawa, H., & Yaghi, O. M. (2009) · Journal of the American Chemical Society · doi:10.1021/ja9015765 · Cited by 2,608
Adsorbent Materials for Carbon Dioxide Capture from Large Anthropogenic Point Sources
Choi, S., Drese, J. H., & Jones, C. W. (2009) · ChemSusChem · doi:10.1002/cssc.200900036 · Cited by 2,596
Advances in CO2 capture technology—The U.S. Department of Energy's Carbon Sequestration Program
Figueroa, J. D., Fout, T., Plasynski, S., McIlvried, H., & Srivastava, R. D. (2008) · International Journal of Greenhouse Gas Control · doi:10.1016/s1750-5836(07)00094-1 · Cited by 2,281
Song, C. (2006) · Catalysis Today · doi:10.1016/j.cattod.2006.02.029 · Cited by 1,809
McKeown, N. B., & Budd, P. M. (2006) · Chemical Society Reviews · doi:10.1039/b600349d · Cited by 1,747
Conjugated Microporous Poly(aryleneethynylene) Networks
Jiang, J., Su, F., Trewin, A., Wood, C. D., Campbell, N. L., Niu, H., Dickinson, C., Ganin, A. Y., Rosseinsky, M. J., Khimyak, Y. Z., et al. (2007) · Angewandte Chemie International Edition · doi:10.1002/anie.200701595 · Cited by 1,465
Self-citationBritt, D., Furukawa, H., Wang, B., Glover, T. G., & Yaghi, O. M. (2009) · Proceedings of the National Academy of Sciences · doi:10.1073/pnas.0909718106 · Cited by 1,211
High Uptakes of CO2 and CH4 in Mesoporous Metal—Organic Frameworks MIL-100 and MIL-101
Llewellyn, P. L., Bourrelly, S., Serre, C., Vimont, A., Daturi, M., Hamon, L., De Weireld, G., Chang, J.-S., Hong, D.-Y., Kyu Hwang, Y., et al. (2008) · Langmuir · doi:10.1021/la800227x · Cited by 1,156
Adsorption Equilibrium of Methane, Carbon Dioxide, and Nitrogen on Zeolite 13X at High Pressures
Cavenati, S., Grande, C. A., & Rodrigues, A. E. (2004) · Journal of Chemical & Engineering Data · doi:10.1021/je0498917 · Cited by 1,147
Demessence, A., D’Alessandro, D. M., Foo, M. L., & Long, J. R. (2009) · Journal of the American Chemical Society · doi:10.1021/ja903411w · Cited by 1,115
Conjugated Microporous Polymers
Cooper, A. I. (2009) · Advanced Materials · doi:10.1002/adma.200801971 · Cited by 1,031
Self-citationZeolite A imidazolate frameworks
Hayashi, H., Côté, A. P., Furukawa, H., O’Keeffe, M., & Yaghi, O. M. (2007) · Nature Materials · doi:10.1038/nmat1927 · Cited by 1,011
Xu, X., Song, C., Andrésen, J. M., Miller, B. G., & Scaroni, A. W. (2003) · Microporous and Mesoporous Materials · doi:10.1016/s1387-1811(03)00388-3 · Cited by 769
Hydrogen Storage in Microporous Hypercrosslinked Organic Polymer Networks
Wood, C. D., Tan, B., Trewin, A., Niu, H., Bradshaw, D., Rosseinsky, M. J., Khimyak, Y. Z., Campbell, N. L., Kirk, R., Stöckel, E., et al. (2007) · Chemistry of Materials · doi:10.1021/cm070356a · Cited by 704
Self-citationDubinin, M. M. (1989) · Carbon · doi:10.1016/0008-6223(89)90078-x · Cited by 704
Dubinin, M. M. (1989) · Pure and Applied Chemistry · doi:10.1351/pac198961111841 · Cited by 596
High-Pressure Adsorption Equilibria of Methane and Carbon Dioxide on Several Activated Carbons
Himeno, S., Komatsu, T., & Fujita, S. (2005) · Journal of Chemical & Engineering Data · doi:10.1021/je049786x · Cited by 592
Porous structure of hypercrosslinked polystyrene: State-of-the-art mini-review
Tsyurupa, M. P., & Davankov, V. A. (2006) · Reactive and Functional Polymers · doi:10.1016/j.reactfunctpolym.2005.11.004 · Cited by 509
McKeown, N. B., Budd, P. M., Msayib, K. J., Ghanem, B. S., Kingston, H. J., Tattershall, C. E., Makhseed, S., Reynolds, K. J., & Fritsch, D. (2005) · Chemistry – A European Journal · doi:10.1002/chem.200400860 · Cited by 507
CO2 capture by adsorption with nitrogen enriched carbons
Plaza, M. G., Pevida, C., Arenillas, A., Rubiera, F., & Pis, J. J. (2007) · Fuel · doi:10.1016/j.fuel.2007.06.001 · Cited by 505
Self-citationDavankov, V. A., & Tsyurupa, M. P. (1990) · Reactive Polymers · doi:10.1016/0923-1137(90)90038-6 · Cited by 493
Adsorption of CO2 on Zeolites at Moderate Temperatures
Siriwardane, R. V., Shen, M.-S., Fisher, E. P., & Losch, J. (2005) · Energy & Fuels · doi:10.1021/ef040059h · Cited by 491
Amine functionalised metal organic frameworks (MOFs) as adsorbents for carbon dioxide
Arstad, B., Fjellvåg, H., Kongshaug, K. O., Swang, O., & Blom, R. (2008) · Adsorption · doi:10.1007/s10450-008-9137-6 · Cited by 472
Surface modification of activated carbons for CO2 capture
Pevida, C., Plaza, M. G., Arias, B., Fermoso, J., Rubiera, F., & Pis, J. J. (2008) · Applied Surface Science · doi:10.1016/j.apsusc.2008.05.239 · Cited by 468
Self-citationMitigation of CO2by Chemical Conversion: Plausible Chemical Reactions and Promising Products
Xiaoding, X., & Moulijn, J. A. (1996) · Energy & Fuels · doi:10.1021/ef9501511 · Cited by 465
Comparative Study of CO2 Capture by Carbon Nanotubes, Activated Carbons, and Zeolites
Lu, C., Bai, H., Wu, B., Su, F., & Hwang, J. F. (2008) · Energy & Fuels · doi:10.1021/ef8000086 · Cited by 422
Hypercrosslinked polymers: basic principle of preparing the new class of polymeric materials
Tsyurupa, M. P., & Davankov, V. A. (2002) · Reactive and Functional Polymers · doi:10.1016/s1381-5148(02)00173-6 · Cited by 418
Dunne, J. A., Mariwala, R., Rao, M., Sircar, S., Gorte, R. J., & Myers, A. L. (1996) · Langmuir · doi:10.1021/la960495z · Cited by 398
Characterization of Activated Carbon Fibers by CO2 Adsorption
Cazorla-Amorós, D., Alcañiz-Monge, J., & Linares-Solano, A. (1996) · Langmuir · doi:10.1021/la960022s · Cited by 397
Microporous Organic Polymers for Methane Storage
Wood, C. D., Tan, B., Trewin, A., Su, F., Rosseinsky, M. J., Bradshaw, D., Sun, Y., Zhou, L., & Cooper, A. I. (2008) · Advanced Materials · doi:10.1002/adma.200702397 · Cited by 386
Self-citationProducts and processes for a sustainable chemical industry: a review of achievements and prospects
Jenck, J. F., Agterberg, F., & Droescher, M. J. (2004) · Green Chemistry · doi:10.1039/b406854h · Cited by 380
Functionalized Conjugated Microporous Polymers
Dawson, R., Laybourn, A., Clowes, R., Khimyak, Y. Z., Adams, D. J., & Cooper, A. I. (2009) · Macromolecules · doi:10.1021/ma901801s · Cited by 375
Self-citationHydrogen adsorption in microporous hypercrosslinked polymers
Lee, J.-Y., Wood, C. D., Bradshaw, D., Rosseinsky, M. J., & Cooper, A. I. (2006) · Chemical Communications · doi:10.1039/b604625h · Cited by 352
Self-citationAdsorption and Diffusion of Carbon Dioxide on Metal−Organic Framework (MOF-5)
Zhao, Z., Li, Z., & Lin, Y. S. (2009) · Industrial & Engineering Chemistry Research · doi:10.1021/ie900665f · Cited by 347
Tailoring Pore Properties of MCM-48 Silica for Selective Adsorption of CO2
Kim, S., Ida, J., Guliants, V. V., & Lin, Y. S. (2005) · The Journal of Physical Chemistry B · doi:10.1021/jp045634x · Cited by 332
Aminopropyl-functionalized mesoporous silicas as CO2 adsorbents
Knowles, G. P., Graham, J. V., Delaney, S. W., & Chaffee, A. L. (2005) · Fuel Processing Technology · doi:10.1016/j.fuproc.2005.01.014 · Cited by 326
Silica-templated melamine–formaldehyde resin derived adsorbents for CO2 capture
Pevida, C., Drage, T. C., & Snape, C. E. (2008) · Carbon · doi:10.1016/j.carbon.2008.06.026 · Cited by 321
Self-citationEbner, A. D., & Ritter, J. A. (2009) · Separation Science and Technology · doi:10.1080/01496390902733314 · Cited by 301
CO2 capture by activated and impregnated anthracites
Maroto-Valer, M. M., Tang, Z., & Zhang, Y. (2005) · Fuel Processing Technology · doi:10.1016/j.fuproc.2005.01.003 · Cited by 298
Molecular Level Models for CO2 Sorption in Nanopores
Vishnyakov, A., Ravikovitch, P. I., & Neimark, A. V. (1999) · Langmuir · doi:10.1021/la990726c · Cited by 291
Ben, T., Ren, H., Ma, S., Cao, D., Lan, J., Jing, X., Wang, W., Xu, J., Deng, F., Simmons, J. M., et al. (2009) · Angewandte Chemie · doi:10.1002/ange.200904637 · Cited by 291
Merel, J., Clausse, M., & Meunier, F. (2008) · Industrial & Engineering Chemistry Research · doi:10.1021/ie071012x · Cited by 286
Li, A., Zhang, Q., Zhang, G., Chen, J., Fei, Z., & Liu, F. (2002) · Chemosphere · doi:10.1016/s0045-6535(01)00222-3 · Cited by 260
Molecular Screening of Metal−Organic Frameworks for CO2 Storage
Babarao, R., & Jiang, J. (2008) · Langmuir · doi:10.1021/la800369s · Cited by 258
Optimization of a Pressure-Swing Adsorption Process Using Zeolite 13X for CO2 Sequestration
Ko, D., Siriwardane, R., & Biegler, L. T. (2003) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0204540 · Cited by 257
Adsorption of natural gas and biogas components on activated carbon
Esteves, I. A. A. C., Lopes, M. S. S., Nunes, P. M. C., & Mota, J. P. B. (2008) · Separation and Purification Technology · doi:10.1016/j.seppur.2008.01.027 · Cited by 251
Functionalised micro-/mesoporous silica for the adsorption of carbon dioxide
Knöfel, C., Descarpentries, J., Benzaouia, A., Zeleňák, V., Mornet, S., Llewellyn, P. L., & Hornebecq, V. (2007) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2006.09.018 · Cited by 230
Radosz, M., Hu, X., Krutkramelis, K., & Shen, Y. (2008) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0707974 · Cited by 223
High Surface Area Conjugated Microporous Polymers: The Importance of Reaction Solvent Choice
Dawson, R., Laybourn, A., Khimyak, Y. Z., Adams, D. J., & Cooper, A. I. (2010) · Macromolecules · doi:10.1021/ma101541h · Cited by 219
Self-citationCO2 capture by amine-enriched fly ash carbon sorbents
Gray, M. L., Soong, Y., Champagne, K. J., Baltrus, J., Stevens, R. W., Toochinda, P., & Chuang, S. S. C. (2004) · Separation and Purification Technology · doi:10.1016/s1383-5866(03)00113-8 · Cited by 215
Ritter, J. A., & Ebner, A. D. (2007) · Separation Science and Technology · doi:10.1080/01496390701242194 · Cited by 211
Reversible Chemisorbents for Carbon Dioxide and Their Potential Applications
Lee, K. B., Beaver, M. G., Caram, H. S., & Sircar, S. (2008) · Industrial & Engineering Chemistry Research · doi:10.1021/ie800795y · Cited by 192
Thermodynamics and regeneration studies of CO2 adsorption on multiwalled carbon nanotubes
Hsu, S.-C., Lu, C., Su, F., Zeng, W., & Chen, W. (2010) · Chemical Engineering Science · doi:10.1016/j.ces.2009.10.005 · Cited by 190
Microporous Organic Polymers: Design, Synthesis, and Function
Jiang, J., & Cooper, A. I. (2009) · Topics in current chemistry · doi:10.1007/128_2009_5 · Cited by 179
Self-citationEvaluation of Activated Carbon Adsorbents for CO2Capture in Gasification
Drage, T. C., Blackman, J. M., Pevida, C., & Snape, C. E. (2009) · Energy & Fuels · doi:10.1021/ef8010614 · Cited by 175
Self-citationEvolution of microporosity during activation of carbon
Stoeckli, F., & Ballerini, L. (1991) · Fuel · doi:10.1016/0016-2361(91)90036-a · Cited by 158
Different Approaches for the Development of Low-Cost CO2 Adsorbents
Plaza, M. G., Pevida, C., Arias, B., Casal, M. D., Martín, C. F., Fermoso, J., Rubiera, F., & Pis, J. J. (2009) · Journal of Environmental Engineering · doi:10.1061/(asce)ee.1943-7870.0000009 · Cited by 139
Self-citationSeparation of Hydrogen Mixtures by a Two-Bed Pressure Swing Adsorption Process Using Zeolite 5A
Yang, J., Lee, C., & Chang, J.-W. (1997) · Industrial & Engineering Chemistry Research · doi:10.1021/ie960728h · Cited by 128
On the limits of CO2 capture capacity of carbons
Martín, C. F., Plaza, M. G., Pis, J. J., Rubiera, F., Pevida, C., & Centeno, T. A. (2010) · Separation and Purification Technology · doi:10.1016/j.seppur.2010.06.009 · Cited by 127
Self-citationDevelopment of Supported Ethanolamines and Modified Ethanolamines for CO2 Capture
Filburn, T. P., Helble, J. J., & Weiss, R. A. (2005) · Industrial & Engineering Chemistry Research · doi:10.1021/ie0495527 · Cited by 123
CO2 adsorption, selectivity and water tolerance of pillared-layer metal organic frameworks
Liang, Z., Marshall, M., & Chaffee, A. L. (2009) · Microporous and Mesoporous Materials · doi:10.1016/j.micromeso.2009.11.026 · Cited by 122
Sidorov, S. N., Bronstein, L. M., Davankov, V. A., Tsyurupa, M. P., Solodovnikov, S. P., Valetsky, P. M., Wilder, E. A., & Spontak, R. J. (1999) · Chemistry of Materials · doi:10.1021/cm990274p · Cited by 96
Sircar, S., & Cao, D. (2002) · Chemical Engineering & Technology · doi:10.1002/1521-4125(20021008)25:10<945::aid-ceat945>3.0.co;2-f · Cited by 76
Mechanisms of adsorption of CO2 in the micropores of activated anthracite
Martín‐Martínez, J. M., Torregrosa-Maciá, R., & Mittelmeijer‐Hazeleger, M. C. (1995) · Fuel · doi:10.1016/0016-2361(94)p4340-8 · Cited by 69
Novel adsorption processes for carbon dioxide capture within a IGCC process
Xiao, P., Wilson, S., Xiao, G., Singh, R., & Webley, P. A. (2009) · Energy Procedia · doi:10.1016/j.egypro.2009.01.083 · Cited by 21
Pre-combustion CO2 capture for IGCC plants by an adsorption process
Schell, J., Casas, N., & Mazzotti, M. (2009) · Energy Procedia · doi:10.1016/j.egypro.2009.01.086 · Cited by 14
Cited by
Carbon Dioxide Capture in Metal–Organic Frameworks
Sumida, K., Rogow, D. L., Mason, J. A., McDonald, T. M., Bloch, E. D., Herm, Z. R., Bae, T.-H., & Long, J. R. (2012) · Chemical Reviews · doi:10.1021/cr2003272 · Cited by 6,408
Design and Preparation of Porous Polymers
Wu, D., Xu, F., Sun, B., Fu, R., He, H., & Matyjaszewski, K. (2012) · Chemical Reviews · doi:10.1021/cr200440z · Cited by 1,748
Hypercrosslinked porous polymer materials: design, synthesis, and applications
Tan, L., & Tan, B. (2017) · Chemical Society Reviews · doi:10.1039/c6cs00851h · Cited by 1,357
Porous Organic Materials: Strategic Design and Structure–Function Correlation
Das, S., Heasman, P., Ben, T., & Qiu, S. (2017) · Chemical Reviews · doi:10.1021/acs.chemrev.6b00439 · Cited by 1,286
Recent advances in solid sorbents for CO2capture and new development trends
Wang, J., Huang, L., Yang, R., Zhang, Z., Wu, J., Gao, Y., Wang, Q., O'Hare, D., & Zhong, Z. (2014) · Energy Environ. Sci. · doi:10.1039/c4ee01647e · Cited by 1,168
Metadata
- Authors
- Martín, C. F., Stöckel, E., Clowes, R., Adams, D. J., Cooper, A. I., Pis, J. J., Rubiera, F., & Pevida, C.
- Venue
- Journal of Materials Chemistry
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2011
- Volume
- 21
- Issue
- 14
- Pages
- 5475
- ISSN
- 0959-9428 (ISSN-L)
- 1364-5501
- OpenAlex
- W1964209358
- Cited by
- 334
- References
- 69
- FWCI
- 49.52
- Type
- journal article
- Language
- en
- Open access
- green
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.