The DOI matches its Crossref record; 59 of the 59 references it cites were found in a registry or an index.
A review of advanced and practical lithium battery materials
Abstract
Presented herein is a discussion of the forefront in research and development of advanced electrode materials and electrolyte solutions for the next generation of lithium ion batteries. The main challenge of the field today is in meeting the demands necessary to make the electric vehicle fully commercially viable. This requires high energy and power densities with no compromise in safety. Three families of advanced cathode materials (the limiting factor for energy density in the Li battery systems) are discussed in detail: LiMn1.5Ni0.5O4 high voltage spinel compounds, Li2MnO3–LiMO2 high capacity composite layered compounds, and LiMPO4, where M = Fe, Mn. Graphite, Si, LixTOy, and MO (conversion reactions) are discussed as anode materials. The electrolyte is a key component that determines the ability to use high voltage cathodes and low voltage anodes in the same system. Electrode–solution interactions and passivation phenomena on both electrodes in Li-ion batteries also play significant roles in determining stability, cycle life and safety features. This presentation is aimed at providing an overall picture of the road map necessary for the future development of advanced high energy density Li-ion batteries for EV applications.
Overview
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Integrity signals
Registry
Cites
Statistics
Verification
Claims the paper makes
The claims and statistics of this paper haven’t been checked yet.
Free: it reads the open-access text and checks the first 5 claims that cite a source we can check. Create a free account to check every claim.
Self-check
Percentages, sums and reported differences re-computed from the paper’s own numbers.
The self-check needs the paper’s full text.
Citations
Cites
Challenges for Rechargeable Li Batteries
Goodenough, J. B., & Kim, Y. (2010) · Chemistry of Materials · doi:10.1021/cm901452z · Cited by 10,943
Nano-sized transition-metal oxides as negative-electrode materials for lithium-ion batteries
Poizot, P., Laruelle, S., Grugeon, S., Dupont, L., & Tarascon, J.-M. (2000) · Nature · doi:10.1038/35035045 · Cited by 8,041
Phospho‐olivines as Positive‐Electrode Materials for Rechargeable Lithium Batteries
Padhi, A. K., Nanjundaswamy, K. S., & Goodenough, J. B. (1997) · Journal of The Electrochemical Society · doi:10.1149/1.1837571 · Cited by 7,933
Nonaqueous Liquid Electrolytes for Lithium-Based Rechargeable Batteries
Xu, K. (2004) · Chemical Reviews · doi:10.1021/cr030203g · Cited by 7,437
A highly ordered nanostructured carbon–sulphur cathode for lithium–sulphur batteries
Ji, X., Lee, K. T., & Nazar, L. F. (2009) · Nature Materials · doi:10.1038/nmat2460 · Cited by 5,988
Insertion Electrode Materials for Rechargeable Lithium Batteries
Winter, M., Besenhard, J. O., Spahr, M. E., & Novák, P. (1998) · Advanced Materials · doi:10.1002/(sici)1521-4095(199807)10:10<725::aid-adma725>3.0.co;2-z · Cited by 2,965
A review of the features and analyses of the solid electrolyte interphase in Li-ion batteries
Verma, P., Maire, P., & Novák, P. (2010) · Electrochimica Acta · doi:10.1016/j.electacta.2010.05.072 · Cited by 2,903
Lithium−Air Battery: Promise and Challenges
Girishkumar, G., McCloskey, B., Luntz, A. C., Swanson, S., & Wilcke, W. (2010) · The Journal of Physical Chemistry Letters · doi:10.1021/jz1005384 · Cited by 2,528
Taberna, P. L., Mitra, S., Poizot, P., Simon, P., & Tarascon, J.-M. (2006) · Nature Materials · doi:10.1038/nmat1672 · Cited by 2,010
Battery energy storage technology for power systems—An overview
Divya, K. C., & Østergaard, J. (2009) · Electric Power Systems Research · doi:10.1016/j.epsr.2008.09.017 · Cited by 1,842
Li-alloy based anode materials for Li secondary batteries
Park, C.-M., Kim, J.-H., Kim, H., & Sohn, H.-J. (2010) · Chemical Society Reviews · doi:10.1039/b919877f · Cited by 1,703
Electrochemical lithiation of tin and tin-based intermetallics and composites
Winter, M., & Besenhard, J. O. (1999) · Electrochimica Acta · doi:10.1016/s0013-4686(99)00191-7 · Cited by 1,676
On the Surface Chemical Aspects of Very High Energy Density, Rechargeable Li–Sulfur Batteries
Aurbach, D., Pollak, E., Elazari, R., Salitra, G., Kelley, C. S., & Affinito, J. (2009) · Journal of The Electrochemical Society · doi:10.1149/1.3148721 · Cited by 1,443
Self-citationIonic liquids as electrolytes for Li-ion batteries—An overview of electrochemical studies
Lewandowski, A., & Świderska-Mocek, A. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.06.089 · Cited by 1,189
On-road vehicle detection: a review
Sun, Z., Bebis, G., & Miller, R. (2006) · IEEE Transactions on Pattern Analysis and Machine Intelligence · doi:10.1109/tpami.2006.104 · Cited by 1,150
Aurbach, D., Markovsky, B., Weissman, I., Levi, E., & Ein-Eli, Y. (1999) · Electrochimica Acta · doi:10.1016/s0013-4686(99)00194-2 · Cited by 969
Self-citationThe cathode–electrolyte interface in the Li-ion battery
Edström, K., Gustafsson, T., & Thomas, J. O. (2004) · Electrochimica Acta · doi:10.1016/j.electacta.2004.03.049 · Cited by 900
Thin, Flexible Secondary Li-Ion Paper Batteries
Hu, L., Wu, H., La Mantia, F., Yang, Y., & Cui, Y. (2010) · ACS Nano · doi:10.1021/nn1018158 · Cited by 869
Aurbach, D., Markovsky, B., Salitra, G., Markevich, E., Talyossef, Y., Koltypin, M., Nazar, L., Ellis, B., & Kovacheva, D. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2006.10.025 · Cited by 706
Self-citationWu, X., Jiang, L., Cao, F., Guo, Y., & Wan, L. (2009) · Advanced Materials · doi:10.1002/adma.200802998 · Cited by 672
THE CATHODE-ELECTROLYTE INTERFACE IN A Li-ION BATTERY
EDSTRÖM, K., GUSTAFSSON, T., & THOMAS, J. (2004) · Lithium-Ion Batteries · doi:10.1142/9781860946448_0008 · Cited by 651
A Lithium/Dissolved Sulfur Battery with an Organic Electrolyte
Rauh, R. D., Abraham, K. M., Pearson, G. F., Surprenant, J. K., & Brummer, S. B. (1979) · Journal of The Electrochemical Society · doi:10.1149/1.2129079 · Cited by 592
Solution-Grown Silicon Nanowires for Lithium-Ion Battery Anodes
Chan, C. K., Patel, R. N., O’Connell, M. J., Korgel, B. A., & Cui, Y. (2010) · ACS Nano · doi:10.1021/nn901409q · Cited by 543
Hydrogen storage: the remaining scientific and technological challenges
Felderhoff, M., Weidenthaler, C., von Helmolt, R., & Eberle, U. (2007) · Physical Chemistry Chemical Physics · doi:10.1039/b701563c · Cited by 532
Hassoun, J., & Scrosati, B. (2010) · Advanced Materials · doi:10.1002/adma.201002584 · Cited by 415
Nitridation-Driven Conductive Li4Ti5O12 for Lithium Ion Batteries
Park, K., Benayad, A., Kang, D. J., & Doo, S. (2008) · Journal of the American Chemical Society · doi:10.1021/ja806104n · Cited by 415
Conducting‐Polymer/Iron‐Redox‐ Couple Composite Cathodes for Lithium Secondary Batteries
Park, K., Schougaard, S. B., & Goodenough, J. B. (2007) · Advanced Materials · doi:10.1002/adma.200600369 · Cited by 410
Nanostructured Anode Material for High‐Power Battery System in Electric Vehicles
Amine, K., Belharouak, I., Chen, Z., Tran, T., Yumoto, H., Ota, N., Myung, S., & Sun, Y. (2010) · Advanced Materials · doi:10.1002/adma.201000441 · Cited by 396
High-Rate LiFePO4 Lithium Rechargeable Battery Promoted by Electrochemically Active Polymers
Huang, Y.-H., & Goodenough, J. B. (2008) · Chemistry of Materials · doi:10.1021/cm8012304 · Cited by 374
Electric vehicles: The role and importance of standards in an emerging market
Brown, S., Pyke, D., & Steenhof, P. (2010) · Energy Policy · doi:10.1016/j.enpol.2010.02.059 · Cited by 322
LiMn0.8Fe0.2PO4: An Advanced Cathode Material for Rechargeable Lithium Batteries
Martha, S. K., Grinblat, J., Haik, O., Zinigrad, E., Drezen, T., Miners, J. H., Exnar, I., Kay, A., Markovsky, B., & Aurbach, D. (2009) · Angewandte Chemie International Edition · doi:10.1002/anie.200903587 · Cited by 311
Self-citationKang, S.-H., Kempgens, P., Greenbaum, S., Kropf, A. J., Amine, K., & Thackeray, M. M. (2007) · Journal of Materials Chemistry · doi:10.1039/b618715c · Cited by 288
On the application of ionic liquids for rechargeable Li batteries: High voltage systems
Borgel, V., Markevich, E., Aurbach, D., Semrau, G., & Schmidt, M. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.08.099 · Cited by 281
Self-citationMoshkovich, M., Cojocaru, M., Gottlieb, H. E., & Aurbach, D. (2001) · Journal of Electroanalytical Chemistry · doi:10.1016/s0022-0728(00)00457-5 · Cited by 271
Self-citationArrebola, J. C., Caballero, A., Cruz, M., Hernán, L., Morales, J., & Castellón, E. R. (2006) · Advanced Functional Materials · doi:10.1002/adfm.200500892 · Cited by 225
A low-temperature electrolyte for lithium and lithium-ion batteries
Plichta, E. J., & Behl, W. K. (2000) · Journal of Power Sources · doi:10.1016/s0378-7753(00)00367-0 · Cited by 210
Lithium anode for lithium-air secondary batteries
Imanishi, N., Hasegawa, S., Zhang, T., Hirano, A., Takeda, Y., & Yamamoto, O. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.07.080 · Cited by 206
Elazari, R., Salitra, G., Talyosef, Y., et al. (2010) · Journal of The Electrochemical Society · doi:10.1149/1.3479828 · Cited by 177
Novel composite polymer electrolyte for lithium air batteries
Zhang, D., Li, R., Huang, T., & Yu, A. (2010) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.08.063 · Cited by 164
Gnanaraj, J., Levi, M. D., Levi, E., Salitra, G., Aurbach, D., Fischer, J. E., & Claye, A. (2001) · Journal of The Electrochemical Society · doi:10.1149/1.1368096 · Cited by 146
Self-citationRevisiting LiClO[sub 4] as an Electrolyte for Rechargeable Lithium-Ion Batteries
Marom, R., Haik, O., Aurbach, D., & Halalay, I. C. (2010) · Journal of The Electrochemical Society · doi:10.1149/1.3447750 · Cited by 145
Self-citationLi, W., & Lucht, B. L. (2006) · Journal of The Electrochemical Society · doi:10.1149/1.2210588 · Cited by 143
Influence of the PVdF binder on the stability of LiCoO2 electrodes
Markevich, E., Salitra, G., & Aurbach, D. (2005) · Electrochemistry Communications · doi:10.1016/j.elecom.2005.09.010 · Cited by 143
Self-citationThermal instability of Olivine-type LiMnPO4 cathodes
Chen, G., & Richardson, T. J. (2009) · Journal of Power Sources · doi:10.1016/j.jpowsour.2009.08.046 · Cited by 143
The electrochemical behavior of selected polar aprotic systems
Aurbach, D., & Gottlieb, H. E. (1989) · Electrochimica Acta · doi:10.1016/0013-4686(89)87079-3 · Cited by 142
Self-citationMitigation of maximum world oil production: Shortage scenarios
Hirsch, R. L. (2008) · Energy Policy · doi:10.1016/j.enpol.2007.11.009 · Cited by 137
Lithium MAS NMR studies of cathode materials for lithium-ion batteries
Grey, C. P., & Lee, Y. J. (2003) · Solid State Sciences · doi:10.1016/s1293-2558(03)00113-4 · Cited by 132
Aurbach, D., Gnanaraj, J., Geißler, W., & Schmidt, M. (2003) · Journal of The Electrochemical Society · doi:10.1149/1.1631820 · Cited by 95
Self-citationYaakov, D., Gofer, Y., Aurbach, D., & Halalay, I. C. (2010) · Journal of The Electrochemical Society · doi:10.1149/1.3507259 · Cited by 90
Self-citationMarkovsky, B., Amalraj, F., Gottlieb, H. E., Gofer, Y., Martha, S. K., & Aurbach, D. (2010) · Journal of The Electrochemical Society · doi:10.1149/1.3294774 · Cited by 90
Self-citationAurbach, D., Levi, M. D., & Levi, E. (2008) · Solid State Ionics · doi:10.1016/j.ssi.2007.12.070 · Cited by 85
Self-citationAurbach, D., Teller, H., & Levi, E. (2002) · Journal of The Electrochemical Society · doi:10.1149/1.1502683 · Cited by 80
Self-citationDevelopment of lithium-ion battery for fuel cell hybrid electric vehicle application
Kojima, T., Ishizu, T., Horiba, T., & Yoshikawa, M. (2008) · Journal of Power Sources · doi:10.1016/j.jpowsour.2008.10.082 · Cited by 70
Behavior of Graphite Electrodes in Solutions Based on Ionic Liquids in In Situ Raman Studies
Markevich, E., Baranchugov, V., Salitra, G., Aurbach, D., & Schmidt, M. A. (2007) · Journal of The Electrochemical Society · doi:10.1149/1.2811897 · Cited by 66
Self-citationAurbach, D., & Chusid, O. (1993) · Journal of The Electrochemical Society · doi:10.1149/1.2056119 · Cited by 60
Self-citationKumagai, N., Komaba, S., Kataoka, Y., et al. (2000) · Chemistry Letters · doi:10.1246/cl.2000.1154 · Cited by 59
Baranchugov, V., Markevich, E., Salitra, G., Aurbach, D., Semrau, G., & Schmidt, M. A. (2008) · Journal of The Electrochemical Society · doi:10.1149/1.2828858 · Cited by 49
Self-citationMarkevich, E., Pollak, E., Salitra, G., & Aurbach, D. (2007) · Journal of Power Sources · doi:10.1016/j.jpowsour.2007.06.187 · Cited by 40
Self-citationCohen, Y., & Aurbach, D. (1999) · Review of Scientific Instruments · doi:10.1063/1.1150130 · Cited by 37
Self-citation
Cited by
Electrolytes and Interphases in Li-Ion Batteries and Beyond
Xu, K. (2014) · Chemical Reviews · doi:10.1021/cr500003w · Cited by 5,566
Thermal runaway caused fire and explosion of lithium ion battery
Wang, Q., Ping, P., Zhao, X., Chu, G., Sun, J., & Chen, C. (2012) · Journal of Power Sources · doi:10.1016/j.jpowsour.2012.02.038 · Cited by 3,103
Metal Oxides and Oxysalts as Anode Materials for Li Ion Batteries
Reddy, M. V., Subba Rao, G. V., & Chowdari, B. V. R. (2013) · Chemical Reviews · doi:10.1021/cr3001884 · Cited by 2,921
Review on recent progress of nanostructured anode materials for Li-ion batteries
Goriparti, S., Miele, E., De Angelis, F., Di Fabrizio, E., Proietti Zaccaria, R., & Capiglia, C. (2014) · Journal of Power Sources · doi:10.1016/j.jpowsour.2013.11.103 · Cited by 2,092
An Outlook on Lithium Ion Battery Technology
Manthiram, A. (2017) · ACS Central Science · doi:10.1021/acscentsci.7b00288 · Cited by 1,771
Metadata
- Authors
- Marom, R., Amalraj, S. F., Leifer, N., Jacob, D., & Aurbach, D.
- Venue
- Journal of Materials Chemistry
- Publisher
- Royal Society of Chemistry (RSC)
- Published
- 2011
- Volume
- 21
- Issue
- 27
- Pages
- 9938
- ISSN
- 0959-9428 (ISSN-L)
- 1364-5501
- OpenAlex
- W2134711156
- Cited by
- 1,075
- References
- 59
- FWCI
- 47.91
- Type
- journal article
- Language
- en
- Open access
- closed
About these checks
Registry, retraction, Cites and statistics results are computed, not judged, with one exception: a printed reference that no index lists is read once by a model before it counts as a citation error. Claims are extracted by a model and kept only when their quote appears verbatim in the text; each cited source is then checked, with a model’s help, for whether it says what the claim relies on. Those verdicts can be wrong — read the claim’s quote and the cited source before relying on one.
Statistics and arithmetic are recomputed, not judged.
Confidence bands are shown only for fields calibrated on our annotated test set. None is calibrated yet, so no band is shown.
What counts as a claim ›How we measure confidence ›How we check this ›
Are you an author, or do you see a problem with this page? Request a review
Data sources
Bibliographic data: Semantic Scholar, OpenAlex, Crossref.
Contains information from the Semantic Scholar Academic Graph Datasets, made available under the ODC Attribution License (ODC-BY 1.0).
Semantic Scholar’s data is described in: Kinney, R., et al. (2023). The Semantic Scholar Open Data Platform. arXiv:2301.10140.